VSVirendra Kumar Sachdev

Virendra Kumar Sachdev

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Virendra Kumar Sachdev has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    EMI shielding of ABS composites filled with different temperature-treated equal-quantity charcoals

    by Krishna Kamal Halder, V. K. Sachdev, Monika Tomar, Vinay Gupta

    Acrylonitrile-butadiene-styrene (ABS) composites were prepared by dry mixing equal-quantity (20 wt%) charcoals treated at different temperatures followed by hot compression. Processing parameters were kept the same. Seven samples of the same charcoal were modified for carbonization at different temperatures varying from 500 °C to 1100 °C in steps of 100 °C. Temperature treatment of charcoal crafts an increase in the conductivity of ABS composites, primarily accountable for the enhancement of shielding. The electromagnetic shielding effectiveness in the X-band (8.2–12.4 GHz) has been discovered to significantly increase for composites with ascending temperature-treated charcoals. An abrupt increase in the conductivity of ABS composites containing equal quantities of charcoal subjected to enhanced temperature treatments truly explains the effective absorption behaviour. The composite containing 1100 °C temperature-treated charcoal shows absorption-dominated SE of ∼36.8 dB at 11.6 GHz. Dielectric behaviour proclaims a decrease in dielectric loss (ε′′) with an increase in the frequency. Besides this, the increased carbonization temperatures also show increased porosity and high dielectric losses. The scanning electron microscopy studies validate the increase in the porosity of charcoals due to the increase in the treatment temperature. The results are promising for the development of custom-made shielding composites possessing equal quantities of charcoal treated at enhanced temperatures.


  • Fabrication and characterization of ABS/rGO nano- composites for EMI shielding application

    by S. K. Sharma, D. Tripathi, R. Kumar, P. Gautam, V. K. Sachdev, R. P. Tandon

    Using selective dispersion of reduced graphene oxide (rGO) with in acrylonitrile-butadiene-styrene (ABS) matrix, we have demonstrated the formation of a novel nanocomposite with superior microstructure and improved electromagnetic interference (EMI) shielding characteristic. rGO was synthesized by modified hummer’s method and characterized by raman spectroscopy. ABS/rGO nanocomposite with different wt% were prepared in the form of pellets using dry tumble mixing followed by hot compression technique. A low percolation threshold at 2 wt% of rGO has been observed which can be ascribed to selective dispersion of rGO in ABS. The percolation behaviour of prepared nanocomposite series was studied and DC electrical conductivity wasmodelled theoretically using power law. Maximum shielding effectiveness ∼27 dB was obtained at 40 wt% of rGO loading.


  • EMI shielding of MWCNT/ABS nanocomposites in contrast to graphite/ABS composites and MWCNT/PS nanocomposites

    by V. K. Sachdev, S. K. Sharma, Monika Tomar, Vinay Gupta, R. P. Tandon

    SE of MWCNT/ABS compare to MWCNT/PS and Gr/ABS as a function of σ dc .


  • Synergic effect of graphene and MWCNT fillers on electromagnetic shielding properties of graphene–MWCNT/ABS nanocomposites

    by S. K. Sharma, Vinay Gupta, R. P. Tandon, V. K. Sachdev

    Graphene–MWCNT/ABS nanocomposites have been prepared using a solvent-free dry tumble mixing process followed by hot compaction.


  • Pre-localized MWCNT network for a low percolation threshold in MWCNT/ABS nanocomposites: experiment and theory

    by S. K. Sharma, R. P. Tandon, V. K. Sachdev

    Nanocomposites of well-dispersed multi walled carbon nanotubes (MWCNTs) in an acrylonitrile–butadiene–styrene (ABS) matrix were prepared by dry tumble mixing and a subsequent hot compression technique. The preparation method is analysed here to assist in the explanation and understanding of the experimental observations. The vision of the processing method has been confirmed using scanning electron microscopy. As a result of decent dispersion and pre-localization of MWCNTs in the ABS matrix, the electrical conductivity of the nanocomposite as a function of filler content exhibits a distinctive percolation behavior with a percolation threshold of only 0.0005 volume fraction. The high aspect ratio of MWCNTs enables the creation of interconnected networks within the ABS matrix at a very low nanofiller loading, while their high inherent electrical conductivity yields nanocomposites with a high bulk electrical conductivity. To explain the conductivity behaviour, statistical percolation theory and GEM theory are employed. The model parameters elaborated show that both models can adequately describe the behaviour. A comparative analysis of the applicability of percolation theory and GEM theory for expressing the conductivity behavior of the MWCNT/ABS composites with other research works has been performed. Finally, the electrical conductivity of MWCNTs based on the data in this work and elsewhere is evaluated. The universal exponent t is found to be 1.93 for a best-fit value of percolation threshold of 0.000485 vol. fraction of MWCNTs in this work. The D shore hardness results have revealed a random increase in hardness and density with an increasing MWCNT content.


  • Electrical and EMI shielding characterization of multiwalled carbon nanotube/polystyrene composites

    by Virendra Kumar Sachdev, Sudeshna Bhattacharya, Kamlesh Patel, Surender Kumar Sharma, Navin Chand Mehra, Ram Pal Tandon

    The electromagnetic interference (EMI) shielding mechanism of carbon nanotube (CNT)/polymer nanocomposites synthesized through a unique processing technique has been studied. As CNT/polymer nanocomposites evolve towards device applications, homogenous dispersion of CNTs has become a main objective to realize their full potential. In this work, dispersion of multi‐walled carbon nanotubes (MWCNTs) in polystyrene (PS) powder via dry state tumble mixing has been carried out. This involves the coating of the PS particles with the MWCNTs. Pellets were prepared by hot compression of resulted mixture. Conductivity behavior has shown that an extremely small mass fraction of 0.05 wt % MWCNTs in PS is good enough for percolation threshold. A detailed study of EMI shielding behavior of these composites is reported in addition to physical phenomena involved. The shielding effectiveness achieved is higher compared to solution mixing technique used by others. Decrease in hardness with increase in MWCNT content is little. Scanning electron microscope studies of these nanocomposites revealed a web/mesh like structure consisting of MWCNTs. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40201.


  • Electromagnetic interference shielding of graphite/acrylonitrile butadiene styrene composites

    by V. K. Sachdev, K. Patel, S. Bhattacharya, R. P. Tandon

    Dispersion of graphite within the acrylonitrile butadiene styrene matrix demonstrates enhanced electromagnetic interference shielding of composites through the use of tumble mixing technique. A shielding effectiveness of 60 dB with 15 wt % of graphite has been achieved. D shore hardness data revealed a little decrease in hardness of composites with rise in graphite content. DC conductivity measurements revealed a fairly low percolation threshold at 3 wt % of graphite. The conductivity exhibited by 15 wt % composite is 1.66 × 10−1 S/cm. These composites are fit for use as an effective and convenient EMI shielding material because of easy processing, better hardness, light weight, and, reasonable shielding efficiency. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011


  • Decisive properties of graphite-filled cement composites for device application

    by S. Bhattacharya, V.K. Sachdev, R. Chatterjee, R.P. Tandon


  • Electrical conductivity of prelocalized graphite‐filled blend of polyvinyl chloride/styrene acrylonitrile composites in relationship to morphology and hardness

    by V. K. Sachdev, N. K. Srivastava, Varij Panwar, H. Singh, N. C. Mehra, R. M. Mehra

    At present there is a greater need to design conducting polymeric composites that suit particular application with little compromise on mechanical properties. This work deals with the study of electrical conductivity and mechanical strength of graphite‐filled blend of polyvinyl chloride/styrene acrylonitrile (PVC/SAN) composites. Samples were prepared by prelocalization of graphite onto the particles of PVC and SAN with subsequent compression molding. At a fixed volume ratio of 1:1 of PVC/SAN, percolation threshold of 0.0063 volume fraction of graphite has been observed. SAN has improved the D‐shore hardness of composites. Composites with more than 3 wt% graphite content have good conductivity and still preserve a reasonable mechanical strength. Conductivity patterns suggest higher affinity of graphite for PVC as compared to SAN. Scanning electron microscopy (SEM) micrographs indicate the widening of graphite layers with increasing graphite content. The electrical conductivity of composites has been explained in terms of percolation theory. The universal exponent t is found to be 3.09 for a best‐fit value of percolation threshold of 0.0057 volume fraction of graphite. There is good agreement between calculated and experimental values.