RDRafael Dalmau

Rafael Dalmau

*This is an algorithmically generated author record based on publicly available information.

Rafael Dalmau has a total of 126 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    High temperature N2 annealing for N-polar bulk AlN substrates

    by Toru Kinoshita, Samuel Kirby, Jeffrey Britt, Rafael Dalmau

    High temperature annealing treatments with two different wafer configurations under N2 atmosphere were performed to improve the N-polar surface quality of bulk AlN substrates and to mitigate its impact on the morphology and structural properties of subsequently grown homoepitaxial films. After N2 annealing at 1700–1850 °C, scratches and particles that remained on the as-CMP N-polar surface completely disappeared. The annealed N-polar surface consisted of a step-and-terrace structure with step heights of ∼0.5 nm and uniform terrace widths. For single wafer configuration anneals, the etching rate increased from 0.32 μm/h to 2.54 μm/h with annealing temperature, while the step retreat velocity estimated from etching increased from 18.4 to 155.6 nm/s over the same temperature range. An activation energy for etching of 5.0 eV for the single wafer annealing configuration was calculated. Although surface pits were observed after N2 annealing in the single wafer configuration, the use of a proximity cap configuration reduced the pit density to less than 0.3 mm−2 and produced smooth surfaces. Furthermore, AlN films grown by MOCVD on annealed substrates exhibited a significant reduction in the density of surface hillocks as compared to those grown on unannealed substrates. This study provides a general AlN pre-epi wafer annealing approach to improve the morphology and surface quality of N-polar AlN substrates and subsequently grown homoepitaxial films.

  • (Invited) MOCVD Growth of Smooth and Uniform N-Polar AlN Films on AlN Bulk Substrates

    by Rafael Dalmau, Samuel Kirby, Jeffrey Britt, Toru Kinoshita

    GaN-based electronic devices are being developed for high-power, high-temperature, and high-frequency applications, where they outperform devices based on traditional semiconductors due to advantageous material properties, such as high thermal conductivity and wide bandgap energy. In nitride high electron mobility transistors (HEMTs), high-power switching and high-frequency amplification are enabled by a high sheet carrier density and mobility, high breakdown voltage, and low on-resistance due to the 2D electron gas generated by the polarization discontinuity at the AlGaN/GaN interface. Most of these devices are based on metal polar heterostructures, but N-polar HEMTs are gaining attention since they offer prospects for improved performance [1]. The reversed location of the wider bandgap layer, under the channel, provides enhanced carrier confinement due to the improved back barrier effect, while having the lower bandgap material at the device surface simplifies the fabrication of low resistivity Ohmic contacts. However, epitaxial growth of N-polar III-nitrides and their alloys is challenging since the surface reconstructions present during growth, which may differ from the metal polar orientation [2], alter the surface kinetics, with potential adverse consequences to the surface morphology and polar stability if the growth parameters are not customized for the polar orientation [3]. Thus, development of dedicated processes for N-polar film growth are required for evolution of this technology [4]. Bulk AlN grown by physical vapor transport is a promising substrate material for high quality III-nitride epitaxy, offering high electrical resistivity and thermal conductivity, low dislocation density, and an ultra-wide bandgap. N-polar HEMTs grown on N-polar AlN substrates [5] simultaneously benefit from these material properties as well as the advantages of N-polar heterostructures, which may improve the maximum power gain cut-off frequency. While growth of Al-polar AlN and AlGaN films on AlN substrates by MOCVD and MBE is well developed, and a surface kinetics-based model for control of the AlN surface morphology has been presented [6], growth of N-polar AlN is relatively immature and can suffer from high surface roughness and polarity inversion. In this work, the development of an MOCVD growth process for smooth and uniform N-polar AlN will be presented. Application of surface kinetics concepts in a quantitative and predictive manner for control of the N-polar AlN surface morphology and polarity will be discussed. References [1] S. Keller et al. , Semicond. Sci. Technol., 29 , 113001 (2014). [2] Y. Kangawa et al ., Materials, 6 , 3309 (2013). [3] P. Pampili and M. Pristovsek, J. Appl. Phys., 135 , 195303 (2024). [4] S. Mita et al ., Phys. Status Solidi C, 8 , 2078 (2011). [5] E. Kim et al. , Appl. Phys. Lett., 122 , 92104 (2023). [6] I. Bryan et al. , J. Cryst. Growth, 438 , 81 (2016).

  • Mapping Analysis of Crystalline Perfection and UV‐C Transparency of 2‐in. Aluminum Nitride Substrates Grown by Physical Vapor Transport

    by Rafael Dalmau, Samuel Kirby, Jeffrey Britt, Raoul Schlesser

    Large‐diameter, single‐crystalline aluminum nitride (AlN) substrates are sought for growth of AlGaN‐based devices. A combination of high crystalline perfection and optical transparency is desired for UV‐C emitter applications. A mapping analysis of 2‐in. AlN substrates grown by physical vapor transport is performed to study the within‐wafer uniformity of structural and optical properties. Substrates with spatially uniform crystalline perfection and UV‐C absorption coefficients, as determined by typical X‐ray rocking curve widths below 15 arcsec and 4.68 eV absorption coefficients below 20 cm−1, are shown. These findings demonstrate a robust mass production process for high‐quality, 2 in. AlN substrates possessing uniform structural and UV optical properties, making them highly suited for growth of next‐generation, AlGaN‐based devices.


  • High p-conductivity in AlGaN enabled by polarization field engineering

    by Shashwat Rathkanthiwar, Pramod Reddy, Baxter Moody, Cristyan Quiñones-García, Pegah Bagheri, Dolar Khachariya, Rafael Dalmau, Seiji Mita, Ronny Kirste, Ramón Collazo, et al.

    High p-conductivity (0.7 Ω−1 cm−1) was achieved in high-Al content AlGaN via Mg doping and compositional grading. A clear transition between the valence band and impurity band conduction mechanisms was observed. The transition temperature depended strongly on the compositional gradient and to some degree on the Mg doping level. A model is proposed to explain the role of the polarization field in enhancing the conductivity in Mg-doped graded AlGaN films and the transition between the two conduction types. This study offers a viable path to technologically useful p-conductivity in AlGaN.


  • (Invited) Deep Level Defects in AlN Studied By UV-Visible Spectroscopy

    by Rafael Dalmau, Samuel Kirby, Jeffrey Britt, Raoul Schlesser

    The ultrawide-bandgap (UWBG) AlGaN alloy system is emerging as a promising material for next generation power semiconductor devices. The increase in bandgap as the alloy composition is varied from the binary endpoints GaN to AlN leads to an increase in the critical electric field, which is a key parameter determining the performance of power semiconductor devices. As development of GaN and SiC materials for high-frequency and high-power devices reaches a state of maturity, pursuit of improved device performance is generating interest in UWBG materials with larger bandgaps. High Al composition AlGaN alloys, in addition to offering increased critical electric fields, offer prospects for improved device performance in high temperature operation. Fundamental challenges to the development of AlGaN-based devices, such as controllable doping, electrical contacts, and effective passivation, remain, but a variety of power devices have already been demonstrated (1-3). Point defects strongly affect the material properties of semiconductors, with important consequences for device performance. In traditional semiconductors, such as Si, point defects have been studied extensively, and point defect engineering methods have been developed to enhance device performance. However, the properties of point defects in UWBG materials are not as well understood. Point defects may be introduced during device growth, fabrication, and operation. On the one hand, intentionally introduced impurities (dopants) are critical to the control of electrical transport, while on the other hand, unintentionally introduced impurities may act deleteriously as carrier traps or recombination centers. In AlGaN, compensation by deep level, native point defects or unintentionally incorporated impurities limits achievable free carrier concentrations in electronic devices, while defects and their complexes affect the optical properties in optoelectronic devices. Since point defects exert such a strong influence on material properties, and are often responsible for device degradation, knowledge of their formation mechanisms and material effects are essential to develop strategies for the required control of point defect concentrations (4). In this work, we studied the optical signatures of deep level defects in single crystal AlN substrates. AlN possesses a high thermal conductivity and a close lattice match to high Al composition alloys, which make it an excellent substrate choice for growth of AlGaN-based power electronic and optoelectronic devices. High-quality, 2-inch diameter AlN substrates with average threading dislocation densities below 103 cm-2 were recently demonstrated (5). However, high optical absorption in the ultraviolet-C (UV-C) region was observed in AlN substrates grown by physical vapor transport (PVT), due to a deep level absorption band related to the carbon impurity. This absorption band negatively impacts the efficiency of UV-C optoelectronic devices that require light propagation through the substrate. In order to reduce the unwanted UV-C absorption, we studied the optical properties of double-side polished, 2-inch, c-plane AlN substrates by ultraviolet-visible (UV-Vis) spectroscopy and developed strategies for point defect control. Spatially uniform absorption coefficients below 30 cm-1 at 265 nm were demonstrated across 2-inch substrates (6). In this talk, UV-Vis absorption, photoluminescence (PL) emission, and PL excitation spectra will be presented and correlated with measured impurity concentrations from secondary ion mass spectrometry (SIMS) data, in order to identify deep level defects in AlN. Finally, the mechanisms for reduction of UV-C absorption in PVT AlN will be discussed. References R. J. Kaplar, A. A. Allerman, A. M. Armstrong, M. H. Crawford, J. R. Dickerson, A. J. Fischer, A. G. Baca, and E. A. Douglas, ECS J. Sol. State Sci. and Technol. 6(2), Q3061 (2017). P. H. Carey IV, F. Ren, A. G. Baca, B. A. Klein, A. A. Allerman, A. M. Armstrong, E. A. Douglas, R. J. Kaplar, P. G. Kotula, and S. J. Pearton, IEEE Trans. Semicond. Manuf. 32(4), 473 (2019). A. G. Baca, A. M. Armstrong, B. A. Klein, A. A. Allerman, E. A. Douglas, and R. J. Kaplar, J. Vac. Sci. Technol. A 38, 20803 (2020). S. Washiyama, P. Reddy, B. Sarkar, M. H. Breckenridge, Q. Guo, P. Bagheri, A. Klump, R. Kirste, J. Tweedie, S. Mita, Z. Sitar, and R. Collazo, J. Appl. Phys. 127, 105702 (2020). R. Dalmau, J. Britt, H. Fang, B. Raghothamachar, M. Dudley, and R. Schlesser, Mater Sci. Forum 1004, 63 (2020). R. Dalmau, S. Kirby, J. Britt, and R. Schlesser, ECS Trans. 104(7), 49 (2021).

  • (Invited) Deep Level Defects in AlN Studied By UV-Visible Spectroscopy

    by Rafael Dalmau, Samuel Kirby, Jeffrey Britt, Raoul Schlesser

    Ultraviolet-visible (UV-Vis) spectroscopy was used to measure the optical absorption and emission from high-quality, 2-inch AlN substrates grown by physical vapor transport (PVT). Spatially uniform UV absorption coefficients below 20 cm-1 at 4.68 eV (265 nm) were demonstrated. The complementary spectroscopic data were used to elucidate the mechanism of UV absorption reduction in AlN containing high levels of the carbon impurity and co-doped with Si. Formation of a carbon-silicon defect complex, which shifted the absorption deeper in the UV, was demonstrated by photoluminescence (PL) emission and PL excitation (PLE) measurements. Additional deep levels in AlN related to cation vacancy complexes with oxygen were identified and discussed.


  • Characterization of prismatic slip in PVT-grown AlN crystals

    by Shanshan Hu, Haoyan Fang, Yafei Liu, Hongyu Peng, Qianyu Cheng, Zeyu Chen, Rafael Dalmau, Jeffrey Britt, Raoul Schlesser, Balaji Raghothamachar, et al.


  • (Invited) Complex Relative Permittivity of UV-C Transparent AlN

    by Rafael Dalmau, Samuel Kirby, Jeffrey Britt, Raoul Schlesser

  • Prismatic Slip in AlN Crystals Grown By PVT

    by Shanshan Hu, Haoyan Fang, Yafei Liu, Hongyu Peng, Tuerxun Ailihumaer, Qianyu Cheng, Zeyu Chen, Rafael Dalmau, Jeffrey Britt, Raoul Schlesser, et al.

  • (Invited) Complex Relative Permittivity of UV-C Transparent AlN

    by Rafael Dalmau, Samuel Kirby, Jeffrey Britt, Raoul Schlesser