PDPatrick Dabert

Patrick Dabert

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Patrick Dabert has a total of 72 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Acclimatization of Candidatus Brocadia to high nitrogen and salinity loads in a sequencing batch reactor: performance and operational insights

    by Clément Likiliki, Patrick Dabert, Fabrice Béline

    This study investigated the acclimatization of Candidatus Brocadia, a freshwater anaerobic ammonium oxidation (Anammox) species, to high nitrogen (up to 1.39 gN/L) and salinity (up to 14.3 gNaCl/L) loads in a semicontinuous sequencing batch reactor. Over one year of operation, the reactor achieved stable nitrogen removal performance, with nitrite removal efficiency exceeding 99% at nitrogen loading rates and salinity concentrations up to 0.72 gN/L/d and 14.29 gNaCl/L, respectively. These results rank among the highest reported for Candidatus Brocadia under similar conditions, demonstrating the feasibility of applying this freshwater species to high-strength, saline effluents such as those from agricultural systems. Batch experiments were conducted to further explore the impact of salinity and the monovalent-to-divalent cation ratio on Anammox activity. The results suggest that while salinity is the primary inhibitory factor, the presence of divalent cations such as Ca2+ and Mg2+, which likely mitigate salinity, may explain the high performance achieved in this study. Additionally, a novel method for real-time determination of nitrite consumption kinetics via pH monitoring was validated, offering a reliable tool for Anammox activity assessment.

  • Open Access

    Acclimatization of freshwater Anammox bacteria to high nitrogen and mixed-ion salinity loads in a Sequencing Batch Reactor: Performance and insight on the impact of monovalent-to-divalent cation ratio

    by Clément Likiliki, Patrick Dabert, Fabrice Beline

    This study investigated the acclimatization of Candidatus Brocadia, a freshwater Anammox species, to high nitrogen (up to 1.39 gN/L) and salinity (up to 14.3 gNaCl/L) loads in a semi-continuous sequencing batch reactor (ASBR). Throughout the experiment (360 days), the reactor demonstrated stable nitrogen removal performance, achieving a nitrite removal efficiency of over 99% even at nitrogen loading rates and salinity concentrations up to 0.72 gN/L/d and 14.29 gNaCl/L, respectively. The monovalent-to-divalent cation ratio (M/D) appeared as a potential factor influencing Anammox performance, with ratios exceeding 7 correlating with significant declines in activity, likely due to granule destabilization as predicted by the divalent cation bridging theory (DCBT). However, subsequent batch experiments revealed that salinity had a more pronounced inhibitory effect on nitrite consumption kinetics than the M/D ratio. These findings demonstrate the feasibility of the Anammox process for treating high-strength, saline effluents, such as those from agricultural systems. This study provides valuable insights into the operational strategies required to extend Anammox applications to complex wastewaters and emphasizes the importance of managing salinity and cation ratios for stable Anammox operation.

  • Open Access

    Biodegradable microfiltration membranes prepared from biobased polyhydroxyalkanoates and green solvent

    by Duc-Trung Tran, Patrick Dabert, Loïc Lemiègre, Jean-Luc Audic, Anthony Courtois, Patrick Loulergue

    Traditional membrane manufacturing processes mostly consume fossil-based polymers and toxic solvents. With a vision toward greener and more sustainable membrane production, the use of polyhydroxyalkanoates (PHAs) - a family of biobased, biodegradable polymers - and green solvents was studied. For the first time, different types of commercially available PHAs were compared for their membrane forming ability via the nonsolvent induced phase separation (NIPS) method. Among the green solvents tested, dimethyl sulfoxide (DMSO) proved to be the best option and can adequately replace traditional toxic solvents like NMP. Among the PHAs tested, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P3HB3HV) with moderate HV content (14%) demonstrated the most potential for membrane fabrication, thanks to its easiness in processing and the best membrane properties achieved. The most optimized PHA membrane exhibited a flux of more than 500 L.h-1.m-2 at 1 bar and median pore size of 0.66 µm (microfiltration range), with a completely symmetric sponge-like structure and decent mechanical strength. In addition, this membrane could be obtained without the use of a porogen or membrane support, showing a clear progress compared to previous studies on PHA membranes for liquid separation. Lastly, the biodegradability of PHA membranes was verified by Biochemical Methane Potential (BMP) test, showing a methane production yield of 502 NmL.g-1 membrane. Thus, the potential of utilizing the biogas produced from this PHA membrane biodegradation process for energy recovery was also discussed.

  • Open Access

    Impact of Doxycycline Addition on Activated Sludge Microflora and Microbial Communities

    by Hayet Djelal, Djouza Haddouche, Megane Lebreton, Vanessa Barros, Cristian Villegas, Patrick Dabert

    Municipal wastewater treatment plants (WWTPs) are exposed to high concentrations of micropollutants that can impact conventional activated sludge treatment. The consequences of this include failure to meet discharge standards and the disintegration of flocs, leading to poor sludge settleability. This lab-scale study focuses on the influence of doxycycline, an antibiotic widely used against human and animal diseases, on protozoa, metazoa, and bacterial communities under sludge growing conditions. Doxycycline was added to the mixed liquor of a communal WWTP up to 0, 100, 200, and 400 mg of doxycycline L−1 and incubated in batch conditions for 23 days. The regular addition of nutrient and carbon sources was preformed every 2 days to prevent sludge starvation. Sludge growth, conductivity, and settleability were measured and compared to sludge microbial community structure, determined by microscopic observations and high-throughput 16S rDNA sequencing. The high doxycycline concentration negatively impacted settleability and correlated with a decrease in bacterial diversity and floc disintegration. The addition of doxycycline promoted the enrichment of Proteobacteria Brevundimonas sp., Luteibacter anthropi, and the Bacteroidetes Chryseobacterium massoliae. These species are known to be resistant to a wide spectrum of antibiotics, including tetracyclines. A study of a larger scale may be conducted based on this study’ results.


  • Open Access

    Removal of a Mixture of Seven Volatile Organic Compounds (VOCs) Using an Industrial Pilot-Scale Process Combining Absorption in Silicone Oil and Biological Regeneration in a Two-Phase Partitioning Bioreactor (TPPB)

    by Margaux Lhuissier, Annabelle Couvert, Patrick Dabert, Abdeltif Amrane, Abdoulaye Kane, Jean-Luc Audic, Eric Dumont

    The treatment of a synthetic polluted gas containing seven volatile organic compounds (VOCs) was studied using a pilot plant in real industrial conditions. The process combined VOC absorption in silicone oil (PolyDiMethylSiloxane, i.e., PDMS), a biological regeneration of the PDMS in a two-phase partitioning bioreactor (TPPB), and a phase separation including settling and centrifugation. The TPPB was operated at a water/PDMS volume ratio of 75/25. The VOCs treatment performance was efficient during the entire test, corresponding to 10 PDMS regeneration cycles. The analysis of the content of the aqueous phase and PDMS confirmed that VOCs are progressively degraded until mineralization. The nitrogen consumption and the characterization of the microorganisms highlighted possible anoxic functioning of the biomass within the first decanter. Moreover, although the absorption and biodegradation performances were very satisfactory, the separation of all phases, essential for the PDMS recycling, was problematic due to the production of biosurfactants by the microorganisms, leading to the formation of a stable emulsion and foaming episodes. As a consequence, the packed column showed slight fouling. However, no significant increase in the pressure drop of the packed bed, as well as no significant impact on VOC absorption efficiency was observed.


  • Open Access

    Estimating consensus proteomes and metabolic functions from taxonomic affiliations

    by Arnaud Belcour, Pauline Hamon-Giraud, Alice Mataigne, Baptiste Ruiz, Yann Le Cunff, Jeanne Got, Lorraine Awhangbo, Mégane Lebreton, Clémence Frioux, Simon Dittami, et al.

    Purpose: Metabarcoding, and metagenomic sequencing have enabled the characterization of highly diverse environmental communities. The challenge of estimating the metabolic functions carried out by these communities has led to the development of several state-of-the-art methods, most of which are tailored to a specific gene marker. However, the increasing diversity of approaches resulting from advances in sequencing technologies drives the need for methods capable of handling heterogeneous microbial community data. Moreover, predictions often depend on their internal analysis pipelines and are influenced by the underlying databases, which link marker genes to specific functional annotations. This limits users’ ability to evaluate the quality of predictions by tracing internal data and processes. Finally, users are constrained by the specific annotations provided by these methods (e.g. EC numbers), limiting their ability to conduct further specialized analyses based on intermediate results. Methods: EsMeCaTa predicts consensus proteomes and their associated functions from taxonomic affiliations. A key feature of EsMeCaTa is its explainability and flexibility. To support the flexible integration of heterogeneous sequencing data, EsMeCaTa utilizes taxonomic affiliations obtained through analyses of diverse sequencing datasets. To provide insight into the knowledge available for each taxonomic affliation and to interpret the relevance of predicted functions, EsMeCaTa identifies a taxonomic rank within a given affliation that is suffciently represented by documented proteomes in the UniProt database. The proteins of the UniProt proteomes are clustered and filtered according to a threshold to create consensus proteomes. These consensus proteomes are automatically annotated with functional information (e.g., EC numbers, GO terms) but they are also designed to be used in further customized annotation workflows. Functional annotations are reported in a functional table, which can be enriched with taxon abundances to generate comprehensive functional profiles. Results: EsMeCaTa predictions have been validated using multiple datasets and compared to a state-of-the-art method. Additionally, it was applied to a novel metabarcoding dataset from a methanogenic reactor, characterizing the microbial community and biogas production across different time points and intake condition. Our results demonstrate the link between biogas production, intake condition and the dynamics of the metabolic functions predicted by EsMeCaTa in the microbial communities.


  • Methane production and microbial community acclimation of five manure inocula during psychrophilic anaerobic digestion of swine manure

    by Thomas Lendormi, Kaïs Jaziri, Fabrice Béline, Sophie Le Roux, Chrystelle Bureau, Cédric Midoux, Suzelle Barrington, Patrick Dabert


  • Open Access

    Circular Economy Applied to Organic Residues and Wastewater: Research Challenges

    by Bénédicte Bakan, Nicolas Bernet, Théodore Bouchez, Rachel Boutrou, Jean-Marc Choubert, Patrick Dabert, Christian Duquennoi, Vincenza Ferraro, Diana García-Bernet, Sylvie Gillot, et al.

    To move today’s agricultural and urban systems towards tomorrow’s circular economy and respond to climate change, it is imperative to turn organic residues and wastewater into resourceful assets. This article discusses the changes that are needed in research to drive this paradigm shift and to go from a “losses and waste” situation to a “resource and opportunities” ambition. The current lines of research aim to maximise the use and value of biomass or organic residues and wastewater and propose new organisational schemes driven by technical innovations. Exploring the pathways to a sustainable future through many domains let us identify five challenges to structure the research efforts and find circular bioeconomy solutions for organic residues and wastewater: (1) proposing innovative processes and integrated multi-process systems; (2) promoting the emergence of multi-scale and cross-sectoral organisations; (3) developing multi-performance evaluation methods, (4) rethinking research–society intersections, and (5) enhancing research–legislation interactions. We end by outlining prospects for moving forward past current limitations: beyond increasing knowledge, research will continue its own transition. Our responsibility today is not to think about what we could do for a better world but what we should do to make our ever-changing world even better and more sustainable. Graphic Abstract


  • Characterization of a combined batch-continuous procedure for the culture of anammox biomass

    by Romain Connan, Patrick Dabert, Sophie Le Roux, Olivier Chapleur, Gilbert Bridoux, Matias B. Vanotti, Fabrice Béline, Albert Magrí