Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anne-Lise Hantson has a total of 109 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Toward Sustainable Management of Spodoptera frugiperda (Lepidoptera: Noctuidae): A Review on the Role of Endophytic Fungi in Crop Protection

    by Nongamanégré Kouanda, Ibtissem Ben Fekih, Marcellin C. Cokola, Anne-Lise Hanstson, Rudy Caparros Megido, Frank Delvigne, Athanase Badolo, Frédéric Francis

    The fall armyworm (FAW), Spodoptera frugiperda, is a highly polyphagous pest that has rapidly expanded across Africa, Asia, and Oceania, threatening food security and agricultural productivity. Reliance on synthetic insecticides for FAW management is increasingly challenged by insecticide resistance, environmental contamination, and adverse effects on non-target organisms and human health. This review synthesizes current knowledge on the potential of endophytic fungi as a sustainable strategy for FAW management. Following a systematic literature search, 59 original research articles published over the past 41 years were evaluated. These studies investigated 44 fungal species across 37 host crops, with Zea mays representing the most extensively studied system. The fungal species most frequently assessed were Beauveria bassiana, Metarhizium anisopliae sensu lato (s.l.), and Epichloe coenophialum. Overall, several fungal species successfully colonized plant tissues and reduced FAW performance through increased larval mortality, delayed development, and reduced feeding. These effects were associated with the production of bioactive secondary metabolites, induction of plant defense responses, and alteration of volatile organic compound emissions. Despite these promising findings, important knowledge gaps remain. Studies assessing effects on non-target organisms and natural enemies are scarce, and field validation remains limited. Research efforts are also geographically biased, with relatively few studies conducted in Africa despite the continent experiencing some of the highest FAW-related losses. Future research should prioritize field evaluations, multitrophic interaction studies, investigations in underrepresented regions, and socio-economic analyses to support farmer adoption. Addressing these gaps will be critical for determining the practical role of endophytic fungi in sustainable FAW management.

  • Open Access

    Effectiveness of raw and activated laterite in removing lead and copper from aqueous solutions: A kinetic and thermodynamic study

    by Corneille Bakouan, Ollé Rodrigue Kam, Anne-Lise Hantson, Boubié Guel

    The growing interest in local materials as natural adsorbents stems from their abundance, low cost, and eco-friendliness, offering an effective, economical, and sustainable alternative to commercial options. The present work investigates the removal performance of lead (Pb2+) and copper (Cu2+) ions from synthetic aqueous solutions using both raw and activated laterite (KN-Ac) under batch conditions. The experiments were carried out to examine the effects of contact time, adsorbent dose, temperature, pH, and initial metal-ion concentration. High determination coefficients obtained from the pseudo-second-order kinetics and Langmuir isotherm models indicate that these models reliably describe the experimental adsorption behavior of the metal ions. The diffusion model-adjusted data revealed that adsorption occurred rapidly at the beginning, with fast adsorption on the outer surface followed by slower adsorption controlled by intraparticle diffusion. The KN-Ac, designated KN-Ac, proved to be highly effective in removing both heavy metals, achieving removal percentages of 97.81 ± 0.23% (4.07 ± 0.01 mg/g) for Pb2+ and 94.24 ± 0.18% (1.18 ± 0.02 mg/g) for Cu2+ at an initial concentration of 10 mg/L. The ΔG values obtained for the metal ions were all negative, indicating that the adsorption process is feasible and spontaneous for Pb(II) and Cu(II) ions on the adsorbents, following the order of thermodynamic stability: Pb2+(KN-Ac) > Cu2+(KN-Ac) > Pb2+(raw laterite [KN]) > Cu2+(KN) in the temperature range of 303–333 K. The positive ΔH values for all metal ions suggest that adsorption onto the adsorbents is endothermic and involves physisorption. The energy values derived from the Dubinin–Radushkevich equation are all below 8 kJ/mol, indicating that the adsorption of Pb2+ and Cu2+ is physical in nature. Furthermore, the Fourier transform infrared spectra of adsorbent residues loaded with heavy metals show no changes compared to the spectra of the unloaded adsorbents, confirming physisorption as the main adsorption mechanism.

  • Open Access

    Physicochemical and Mineralogical Characterizations of Two Natural Laterites from Burkina Faso: Assessing Their Potential Usage as Adsorbent Materials

    by Corneille Bakouan, Louise Chenoy, Boubié Guel, Anne-Lise Hantson

    In the framework of lateritic material valorization, we demonstrated how the geological environment determines the mineralogical characterizations of two laterite samples, KN and LA. KN and LA originate from the Birimian and Precambrian environments, respectively. We showed that the geological criterion alone does not determine the applicability of these laterites as potential adsorbents but must be associated with their physicochemical properties. The characterizations were carried out using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Thermal analysis, and Atomic Emission Spectrometry Coupled with an Inductive Plasma Source. The major mineral phases obtained by X-ray diffraction analysis coupled with infrared analysis showed that the KN and LA laterite samples were composed of quartz (33.58% to 45.77%), kaolinite (35.64% to 17.05%), hematite (13.36% to 11.43%), and goethite (7.44% to 6.31%). The anionic exchange capacity of the KN and LA laterites ranged from 86.50 ± 3.40 to 73.91 ± 9.94 cmol(-)·kg−1 and from 73.59 ± 3.02 to 64.56 ± 4.08 cmol(-)·kg−1, respectively, and the cation exchange capacity values are in the order of 52.3 ± 2.3 and 58.7 ± 3.4 cmol(+)/Kg for the KN and LA samples, respectively. The specific surface values determined by the BET method were 58.65 m2/g and 41.15 m2/g for the KN and LA samples, respectively. The effects of adsorbent doses on As(III,V), Pb(II), and Cu(II) adsorption were studied. At 5 mg/L As and 15 g/L adsorbent (pH 6.5–7), arsenate removal was 99.72 ± 0.35% and 99.58 ± 0.45% for KN and LA, respectively, whereas arsenite removal reached 83.52 ± 2.21% and 98.59 ± 0.64% for LA and KN, respectively. The Pb(II) and Cu(II) removal rates were 74.20 ± 0.95% for 2.4 g/L KN and 54.18 ± 0.01% for 8 g/L KN, respectively. Based on their physicochemical and mineralogical characteristics, the KN and LA laterite samples were shown to possess a high potential as adsorbent material candidates for removing heavy metals and/or anionic species from groundwater.


  • Open Access

    Physicochemical and Mineralogical Characterizations of Two Natural Laterites from Burkina Faso: Assessing Their Potential Usage as Adsorbent Materials

    by Corneille Bakouan, Louise Chenoy, Boubié Guel, Anne-Lise Hantson

    : In the framework of lateritic material valorization, we demonstrated how the geological envi-ronment determines the mineralogical characterizations of two laterite samples, KN and LA. KN and LA originate from the Birimian and Precambrian environments, respectively. We showed that the geological criterion alone does not determine the applicability of these laterites as potential adsorbents but must be associated with their physicochemical properties. The characterizations were carried out using Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Thermal analysis, and Atomic Emission Spectrometry Coupled with an Inductive Plasma Source. ICP analyses indicated that the chemical composition of the laterite samples comprised major oxides (SiO2, Al2O3, and Fe2O3) as well as minor oxides (Na2O, K2O TiO2) in KN and LA samples. The major mineral phases obtained by X-ray diffraction analysis coupled with infrared analysis showed that KN and LA laterite samples were composed of hematite (13.36% to 11.43%), goethite (7.44% to 6.31%), kaolinite (35.64% to 17.05%) and quartz (33.58% to 45.77%). The anionic ex-change capacity of the KN and LA laterites ranged from 86.50 ± 3.40 to 73.91 ± 9.94 cmol(-).kg-1 and 73.59 ± 3.02 to 64.56 ± 4.08 cmol(-).kg-1, respectively. The specific surface values determined by the BET method were 58.65 m2/g and 41.15 m2/g for KN and LA samples, respectively. Based on their physicochemical and mineralogical characteristics, KN and LA laterite samples were shown to possess a high potential as adsorbent material candidates for removing heavy metals and/or an-ionic species from groundwater.

  • Experimental characterization of the flow and turbulence generated by fractal oscillating grids

    by Valentin Musy, Anne-Lise Hantson, Diane Thomas, Jean-Christophe Baudez, Tom Lacassagne

    Inspired from the existing literature on fractal grids in channels and as an extension to classical oscillating grid experiments with simple Cartesian grids, an original investigation of fractal oscillating grid turbulence is here reported. The flows generated by a simple Cartesian grid, a fractal Cartesian grid, a fractal square grid, and a fractal I-shaped grid are studied using particle image velocimetry. Three oscillation frequencies (0.5, 1, and 1.5 Hz) and three stroke amplitudes (0.02, 0.035, and 0.05 m) are considered. The flows are broken down into mean (time averaged), oscillatory (phase dependent), and turbulent contributions using the triple Reynolds decomposition. The oscillation frequency is found to linearly impact the intensity of the mean and the oscillatory flows and the root mean square values of the turbulent fluctuations. In turn, an increase in the stroke amplitude tends to change the topology of the mean and the oscillatory flows. The turbulence intensity is increased by the fractal nature of the grids and is impacted by the mean flow topology, especially for the fractal I-shaped grid for which turbulence is transported away from the grid wake region. The study of the turbulence length scales and spectra reveals that the scales of turbulence mainly depend on the stroke amplitude and the grid geometry. We thus show how fractal oscillating grids can be used to generate turbulence with tailored properties for fundamental studies and practical applications.


  • Open Access

    The Removal of As(III) Using a Natural Laterite Fixed-Bed Column Intercalated with Activated Carbon: Solving the Clogging Problem to Achieve Better Performance

    by Régie Dimanche Ouedraogo, Corneille Bakouan, Abdoul Karim Sakira, Brahima Sorgho, Boubié Guel, Touridomon Issa Somé, Anne-Lise Hantson, Eric Ziemons, Dominique Mertens, Philippe Hubert, et al.

    Natural laterite fixed-bed columns intercalated with two types of layers (inert materials, such as fine sand and gravel, and adsorbent materials, such as activated carbon prepared from Balanites aegyptiaca (BA-AC)) were used for As(III) removal from an aqueous solution. Investigations were carried out to solve the problem of column clogging, which appears during the percolation of water through a natural laterite fixed-bed column. Experimental tests were conducted to evaluate the hydraulic conductivities of several fixed-bed column configurations and the effects of various parameters, such as the grain size, bed height, and initial As(III) concentration. The permeability data show that, among the different types of fixed-bed columns investigated, the one filled with repeating layers of laterite and activated carbon is more suitable for As(III) adsorption, in terms of performance and cost, than the others (i.e., non-intercalated laterite; non-intercalated activated carbon, repeating layers of laterite and fine sand; and repeating layers of laterite and gravel). A study was carried out to determine the most efficient column using breakthrough curves. The breakthrough increased from 15 to 85 h with an increase in the bed height from 20 to 40 cm and decreased from 247 to 32 h with an increase in the initial As(III) concentration from 0.5 to 2 mg/L. The Bohart–Adams model results show that increasing the bed height induced a decrease in the kAB and N0 values. The critical bed depths determined using the bed depth service time (BDST) model for As(III) removal were 15.23 and 7.98 cm for 1 and 20% breakthroughs, respectively. The results show that the new low-cost adsorptive porous system based on laterite layers with alternating BA-AC layers can be used for the treatment of arsenic-contaminated water.


  • Open Access

    Removal of As(III) Using a Natural Laterite Fixed-Bed Column Intercalated with Activated Carbon: Solving the Clogging Problem to Achieve Better Performance

    by Régie Dimanche Ouedraogo, Corneille Bakouan, Abdoul Karim Sakira, Brahima Sorgho, Boubié Guel, Issa Touridomon Somé, Anne-Lise Hantson, Eric Ziemons, Dominique Mertens, Philippe Hubert, et al.

    Natural laterite fixed-bed column intercalated with activated carbon prepared from Balanites ae-gyptiaca (BA-AC) was used for As(III) removal from an aqueous solution. Investigations were carried out to solve the problem of column clogging which appears during water percolation through the column. Experimental tests were conducted to evaluate the hydraulic conductivity and the effects of various parameters such as grain size, bed height, and initial As(III) concentra-tion. The breakthrough increased from 15 to 85 h with the increase of the bed height from 20 to 40 cm, and decreased from 247 to 32 h with the increase of initial As(III) concentration from 0.5 to 2 mg/L. The permeability data showed that the fixed-bed column filled with laterites layers intercalated with activated carbon performs much better than the non-intercalated adsorbent col-umn. The Bohart-Adams model showed that increasing the bed height induced a decrease in kAB and N0 values. The critical bed depths determined using the bed depth service time (BDST) mod-el for As(III) removal were 15.23 and 7.98 cm for 1 and 20% breakthrough, respectively. The re-sults showed that the new low-cost filtration system, based on laterite layers alternated with BA-AC layers, could be used for the treatment of arsenic-contaminated water.


  • Open Access

    Evaluation of the Potential of Lipid-Extracted Chlorella vulgaris Residue for Yarrowia lipolytica Growth at Different pH Levels

    by Guillaume Delfau-Bonnet, Nabila Imatoukene, Tiphaine Clément, Michel Lopez, Florent Allais, Anne-Lise Hantson

    Projections show that the cultivation of microalgae will extend to the production of bio-based compounds, such as biofuels, cosmetics, and medicines. This will generate co-products or residues that will need to be valorized to reduce the environmental impact and the cost of the process. This study explored the ability of lipid-extracted Chlorella vulgaris residue as a sole carbon and nitrogen source for growing oleaginous yeasts without any pretreatment. Both wild-type Yarrowia lipolytica W29 and mutant JMY3501 (which was designed to accumulate more lipids without their remobilization or degradation) showed a similar growth rate of 0.28 h−1 at different pH levels (3.5, 5.5, and 7.5). However, the W29 cell growth had the best cell number on microalgal residue at a pH of 7.5, while three times fewer cells were produced at all pH levels when JMY3501 was grown on microalgal residue. The JMY3501 growth curves were similar at pH 3.5, 5.5, and 7.5, while the fatty-acid composition differed significantly, with an accumulation of α-linolenic acid on microalgal residue at a pH of 7.5. Our results demonstrate the potential valorization of Chlorella vulgaris residue for Yarrowia lipolytica growth and the positive effect of a pH of 7.5 on the fatty acid profile.


  • Open Access

    Experimental Study of Substrate Limitation and Light Acclimation in Cultures of the Microalgae Scenedesmus obliquus—Parameter Identification and Model Predictive Control

    by Federico Alberto Gorrini, Jesús Miguel Zamudio Lara, Silvina Inés Biagiola, José Luis Figueroa, Héctor Hernández Escoto, Anne-Lise Hantson, Alain Vande Wouwer

    In this study, the parameters of a dynamic model of cultures of the microalgae Scenedesmus obliquus are estimated from datasets collected in batch photobioreactors operated with various initial conditions and light illumination conditions. Measurements of biomass, nitrogen quota, bulk substrate concentration, as well as chlorophyll concentration are achieved, which allow the determination of parameters with satisfactory confidence intervals and model cross-validation against independent data. The dynamic model is then used as a predictor in a nonlinear model predictive control strategy where the dilution rate and the incident light intensity are simultaneously manipulated in order to optimize the cumulated algal biomass production.