Fumihiko Maeda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fumihiko Maeda has a total of 170 co-authors. Here are the top co-authors by number of shared publications:
Yoshio Watanabe
The Japan Synchrotron Radiation Research Institute, Japan
34 shared publicationsMasaharu Oshima
The University of Tokyo
20 shared publications- Hiroki Hibino
School of Science and Technology, Kwansei Gakuin University, 2-1 Gakuen, Sanda, Hyogo, 669-1337, Japan
19 shared publications - Satoru Suzuki
Laboratory of Advanced Science and Technology for Industry, University of Hyogo 1 , Kamigori, Ako, Hyogo 678-1205
12 shared publications Y. Watanabe
Japan Synchrotron Radiation Research Institute (JASRI), Sayo, Hyogo 679-5198, Japan
10 shared publications- Toshio Ogino
Yokohama National University
6 shared publications
Latest Publications
- 8 May 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (4)
Catalyst-free growth of graphene on Si substrate using reactive pulsed sputtering
Reactive pulsed plasma sputtering was used to grow graphene directly (i.e., without catalysts) on a Si substrate. Graphene layers and carbon nanowalls were grown at 600 and 800 °C, respectively. Hydrocarbon with sp3-hydrocarbon components, including CHX (X = 1–3), may be the film growth precursors. The amount of precursor supplied by the plasma, which, in turn, governs graphene formation, depends on the target current, as this parameter determines the discharge current. Graphene formation is also attributed to the substrate temperature. Finally, growth time can influence the number of graphene layers, facilitating the growth of few-layer or multilayer graphene.
- 8 May 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (4)
Catalyst-free growth of graphene on Si substrate using reactive pulsed sputtering
Reactive pulsed plasma sputtering was used to grow graphene directly (i.e., without catalysts) on a Si substrate. Graphene layers and carbon nanowalls were grown at 600 and 800 °C, respectively. Hydrocarbon with sp3-hydrocarbon components, including CHX (X = 1–3), may be the film growth precursors. The amount of precursor supplied by the plasma, which, in turn, governs graphene formation, depends on the target current, as this parameter determines the discharge current. Graphene formation is also attributed to the substrate temperature. Finally, growth time can influence the number of graphene layers, facilitating the growth of few-layer or multilayer graphene.
- Open Access
- 17 May 2025
- Published by Surface Science Society Japan in e-Journal of Surface Science and Nanotechnology
- Vol. 23 (2) , 174-181
Graphene Synthesis on Silver Foil by Chemical Vapor Deposition Using Ethanol
We investigated the growth of graphene on silver surfaces by chemical vapor deposition (CVD) with ethanol as the gas material under various growth conditions. The investigation was based on Raman spectroscopy analysis. We determined that over 900°C is required to decompose the ethanol. Additionally, we proposed a graphene growth mechanism on the silver surfaces. Herein, the formation of the graphene nuclei and silver evaporation are competing processes, which limits the crystallinity of the graphene. Furthermore, we demonstrated that the addition of hydrogen during the CVD growth and the modifications of the conditions of the sample cooling process after the growth are valid for expanding the growth conditions and improving the crystallinity of graphene. The modifications included a low cooling rate of the substrates, maintenance of the environmental pressure equal to that of the growth, and a continuous supply of ethanol after the growth. The results indicate that the suppression of silver atom evaporation is the key to obtaining high-crystallinity graphene.
- 17 May 2025
- Published by Surface Science Society Japan in e-Journal of Surface Science and Nanotechnology
- Vol. 23 (2) , 174-181
Open AccessGraphene Synthesis on Silver Foil by Chemical Vapor Deposition Using Ethanol
We investigated the growth of graphene on silver surfaces by chemical vapor deposition (CVD) with ethanol as the gas material under various growth conditions. The investigation was based on Raman spectroscopy analysis. We determined that over 900°C is required to decompose the ethanol. Additionally, we proposed a graphene growth mechanism on the silver surfaces. Herein, the formation of the graphene nuclei and silver evaporation are competing processes, which limits the crystallinity of the graphene. Furthermore, we demonstrated that the addition of hydrogen during the CVD growth and the modifications of the conditions of the sample cooling process after the growth are valid for expanding the growth conditions and improving the crystallinity of graphene. The modifications included a low cooling rate of the substrates, maintenance of the environmental pressure equal to that of the growth, and a continuous supply of ethanol after the growth. The results indicate that the suppression of silver atom evaporation is the key to obtaining high-crystallinity graphene.
- Open Access
- 17 May 2025
- Published by Surface Science Society Japan in e-Journal of Surface Science and Nanotechnology
- Vol. 23 (2) , 182-187
Graphene Growth on Ge(110) Using a Photoresist as a Solid Carbon Source
We investigated the growth of graphene on a Ge(110) substrate using photoresist as the source of the solid material. First, we elucidated that a substrate temperature of 900°C was suitable for graphene growth. Subsequently, graphene was grown on the Ge surfaces under various conditions: we found that the optimal heating time was 3 min, and that the addition of hydrogen to the ambient gas flow improved the crystallinity of the graphene. Furthermore, we found that methoxybutyl acetate was a more suitable solvent for diluting the photoresist than acetone, as the resulting resist thin film exhibited less roughness before heating, which improved graphene crystallinity. Finally, from examining the effect of the flow rate of the mixture gas of Ar and H2, a drastic change in the graphene surface morphology was observed, which resulted from the mass transport of an extremely large amount of the substrate material. This phenomenon might have limited the crystallinity of the graphene and, therefore, should be suppressed in order to grow high-quality graphene using this method.
- 17 May 2025
- Published by Surface Science Society Japan in e-Journal of Surface Science and Nanotechnology
- Vol. 23 (2) , 182-187
Open AccessGraphene Growth on Ge(110) Using a Photoresist as a Solid Carbon Source
We investigated the growth of graphene on a Ge(110) substrate using photoresist as the source of the solid material. First, we elucidated that a substrate temperature of 900°C was suitable for graphene growth. Subsequently, graphene was grown on the Ge surfaces under various conditions: we found that the optimal heating time was 3 min, and that the addition of hydrogen to the ambient gas flow improved the crystallinity of the graphene. Furthermore, we found that methoxybutyl acetate was a more suitable solvent for diluting the photoresist than acetone, as the resulting resist thin film exhibited less roughness before heating, which improved graphene crystallinity. Finally, from examining the effect of the flow rate of the mixture gas of Ar and H2, a drastic change in the graphene surface morphology was observed, which resulted from the mass transport of an extremely large amount of the substrate material. This phenomenon might have limited the crystallinity of the graphene and, therefore, should be suppressed in order to grow high-quality graphene using this method.
- Open Access
- 1 August 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (5)
Controllable growth of oriented graphene nanostructures on stainless steel using plasma enhanced chemical vapor deposition
Graphene/stainless steel (SUS) structures have received attention as an approach to enhancing the performance of SUS in various applications, such as energy storage and electrochemical devices. Despite many studies, the synthesis of graphene nanostructures with controllable growth orientation on SUS remains challenging. The present work demonstrates the selective synthesis of monolayer to bilayer graphene and vertical graphene (i.e., carbon nanowalls) on SUS by plasma enhanced chemical vapor deposition and also explains the associated growth mechanisms. This study indicates that the graphene nucleation density can be tuned by varying the growth temperature and CH4/H2 ratio during synthesis. It is also evident that graphene growth occurs within a mixed phase of γ-Fe and Fe3C at high temperatures, and a high carbon supply of above 900 °C triggers the transition of growth orientation from planar to vertical.
- 1 August 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (5)
Open AccessControllable growth of oriented graphene nanostructures on stainless steel using plasma enhanced chemical vapor deposition
Graphene/stainless steel (SUS) structures have received attention as an approach to enhancing the performance of SUS in various applications, such as energy storage and electrochemical devices. Despite many studies, the synthesis of graphene nanostructures with controllable growth orientation on SUS remains challenging. The present work demonstrates the selective synthesis of monolayer to bilayer graphene and vertical graphene (i.e., carbon nanowalls) on SUS by plasma enhanced chemical vapor deposition and also explains the associated growth mechanisms. This study indicates that the graphene nucleation density can be tuned by varying the growth temperature and CH4/H2 ratio during synthesis. It is also evident that graphene growth occurs within a mixed phase of γ-Fe and Fe3C at high temperatures, and a high carbon supply of above 900 °C triggers the transition of growth orientation from planar to vertical.
- 20 November 2017
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 121 (47) , 26389-26396
Very Gradual and Anomalous Oxidation at the Interface of Hydrogen-Intercalated Graphene/4H-SiC(0001)
We analyzed the surfaces of hydrogen-intercalated graphene on SiC(0001) by photoelectron spectroscopy and Raman spectroscopy after applying electric currents to the graphene for carrier mobility measurements while the sample was exposed to air. We found that Si at the interface between graphene and SiC oxidizes very gradually, whereas the graphene does not. The Si of this Si oxide is mainly divalent, and the oxide is attributed to SiO molecules. These molecules are volatile, and they have not been observed either on the oxidized surface of SiC(0001) or on oxygen-intercalated graphene/SiC(0001) formed by annealing in air or oxygen. This anomalous oxidation, which is triggered by the application of current to the graphene overlayer, could be observed because of the presence of the graphene overlayer and the oxidation at room temperature.
- 20 November 2017
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 121 (47) , 26389-26396
Very Gradual and Anomalous Oxidation at the Interface of Hydrogen-Intercalated Graphene/4H-SiC(0001)
We analyzed the surfaces of hydrogen-intercalated graphene on SiC(0001) by photoelectron spectroscopy and Raman spectroscopy after applying electric currents to the graphene for carrier mobility measurements while the sample was exposed to air. We found that Si at the interface between graphene and SiC oxidizes very gradually, whereas the graphene does not. The Si of this Si oxide is mainly divalent, and the oxide is attributed to SiO molecules. These molecules are volatile, and they have not been observed either on the oxidized surface of SiC(0001) or on oxygen-intercalated graphene/SiC(0001) formed by annealing in air or oxygen. This anomalous oxidation, which is triggered by the application of current to the graphene overlayer, could be observed because of the presence of the graphene overlayer and the oxidation at room temperature.
- 21 October 2016
- Published by IOP Publishing in Applied Physics Express
- Vol. 9 (11) , 115501
Epitaxial growth of monolayer MoSe2 on GaAs
We realized 1–4 monolayer MoSe2 films on Se-terminated GaAs (111)B 2-in. substrates by molecular beam epitaxy. Atomically flat GaAs wafers were prepared by the migration-enhanced epitaxy method, and MoSe2 layers were successfully grown on Se-terminated GaAs (111)B surfaces with layer-number control over the entire wafer area. The obtained MoSe2 crystal is well aligned on the GaAs (111)B surface. The quasi-van der Waals gap formed between a Se-terminated GaAs (111)B surface and MoSe2 was directly observed with a scanning transmission electron microscope. All A1g Raman peaks from 93 points on 2-in. monolayer MoSe2 are distributed within 0.25 cm−1, indicating excellent spatial uniformity.
- 21 October 2016
- Published by IOP Publishing in Applied Physics Express
- Vol. 9 (11) , 115501
Epitaxial growth of monolayer MoSe2 on GaAs
We realized 1–4 monolayer MoSe2 films on Se-terminated GaAs (111)B 2-in. substrates by molecular beam epitaxy. Atomically flat GaAs wafers were prepared by the migration-enhanced epitaxy method, and MoSe2 layers were successfully grown on Se-terminated GaAs (111)B surfaces with layer-number control over the entire wafer area. The obtained MoSe2 crystal is well aligned on the GaAs (111)B surface. The quasi-van der Waals gap formed between a Se-terminated GaAs (111)B surface and MoSe2 was directly observed with a scanning transmission electron microscope. All A1g Raman peaks from 93 points on 2-in. monolayer MoSe2 are distributed within 0.25 cm−1, indicating excellent spatial uniformity.
- 27 September 2013
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 117 (42) , 22123-22130
Structural Instability of Transferred Graphene Grown by Chemical Vapor Deposition against Heating
- 27 September 2013
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 117 (42) , 22123-22130
Structural Instability of Transferred Graphene Grown by Chemical Vapor Deposition against Heating
- 1 September 2013
- Published by Elsevier in Journal of Crystal Growth
- Vol. 378, 404-409
Molecular beam epitaxial growth of graphene using cracked ethylene
- 1 September 2013
- Published by Elsevier in Journal of Crystal Growth
- Vol. 378, 404-409
Molecular beam epitaxial growth of graphene using cracked ethylene
- 19 August 2013
- Published by American Physical Society (APS) in Physical Review B
- Vol. 88 (8) , 085422
Core-level photoelectron spectroscopy study of interface structure of hydrogen-intercalated graphene on-type 4-SiC(0001)The interface structure of hydrogen-intercalated graphene/SiC(0001), formed by annealing SiC substrates with the buffer layer at high temperature under atmospheric molecular hydrogen, was investigated by core-level photoelectron spectroscopy. The investigation of C 1s spectra, captured before and after the annealing at various temperatures in a vacuum, indicates that residual materials (hydrocarbon and hydrogen) stayed at the interface on the as-treated sample and remained there until annealing at around 700 °C. These residual materials would cause distortion of the graphene. The analysis of Si 2p photoelectron spectra reveals insufficient termination of Si-dangling bonds at the interface by hydrogen and that significant interface states remained. The interface states of Si dangling bonds are plausible origins of Fermi level pinning and would act as charged impurities. These distortion and charged impurities should degrade the electronic performance of graphene in this system.
- 19 August 2013
- Published by American Physical Society (APS) in Physical Review B
- Vol. 88 (8) , 085422
Core-level photoelectron spectroscopy study of interface structure of hydrogen-intercalated graphene on-type 4-SiC(0001)The interface structure of hydrogen-intercalated graphene/SiC(0001), formed by annealing SiC substrates with the buffer layer at high temperature under atmospheric molecular hydrogen, was investigated by core-level photoelectron spectroscopy. The investigation of C 1s spectra, captured before and after the annealing at various temperatures in a vacuum, indicates that residual materials (hydrocarbon and hydrogen) stayed at the interface on the as-treated sample and remained there until annealing at around 700 °C. These residual materials would cause distortion of the graphene. The analysis of Si 2p photoelectron spectra reveals insufficient termination of Si-dangling bonds at the interface by hydrogen and that significant interface states remained. The interface states of Si dangling bonds are plausible origins of Fermi level pinning and would act as charged impurities. These distortion and charged impurities should degrade the electronic performance of graphene in this system.