Qingwei Zhou
Research Subjects
Qingwei Zhou has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Jun-Ming Liu
Nanjing University
5 shared publications - Xingsen Gao
South China Normal University
5 shared publications - Zhang Zhang
South China Normal University
5 shared publications Mingliang Jin
3 shared publications- Pengfei Cheng
Chair Materials for Electrical Engineering and Electronics, Institute of Materials Science and Engineering and Institute of Micro and Nanotechnologies MacroNano, TU Ilmenau, Gustav-Kirchhoff-Str. 5, 98693 Ilmenau, Germany
3 shared publications Shaoqiang Su
Institute for Advanced Materials and Laboratory of Quantum Engineering and Quantum Materials, South China Academy of Advanced Optoelectronic, Guangzhou 510006, China
3 shared publications
Latest Publications
- 3 January 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (8) , 4145-4152
Boosting charge transfer with MoS 2 -grafted MXene interlayers for high-efficiency all-inorganic CsPbBr 3 perovskite solar cells with an ultrahigh voltage of 1.701 V
Two-dimensional MXene nanoflakes grafted with MoS 2 QDs are used as multifunctional interlayers at the perovskite/carbon interface in all-inorganic CsPbBr 3 perovskite solar cells, achieving a 10.70% efficiency with an ultrahigh V oc of 1.701 V.
- 3 January 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (8) , 4145-4152
Boosting charge transfer with MoS 2 -grafted MXene interlayers for high-efficiency all-inorganic CsPbBr 3 perovskite solar cells with an ultrahigh voltage of 1.701 V
Two-dimensional MXene nanoflakes grafted with MoS 2 QDs are used as multifunctional interlayers at the perovskite/carbon interface in all-inorganic CsPbBr 3 perovskite solar cells, achieving a 10.70% efficiency with an ultrahigh V oc of 1.701 V.
- 1 November 2020
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 50, 1-8
Tri-functionalized TiO Cl4-2 accessory layer to boost efficiency of hole-free, all-inorganic perovskite solar cells
- 1 November 2020
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 50, 1-8
Tri-functionalized TiO Cl4-2 accessory layer to boost efficiency of hole-free, all-inorganic perovskite solar cells
- 1 April 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (16) , 7784-7791
Photoactivated transition metal dichalcogenides to boost electron extraction for all-inorganic tri-brominated planar perovskite solar cells
The band-energy structure, electron mobility and electronic trap states of the electron-transporting layer (ETL) are critical for perovskite solar cells (PSCs). However, the state-of-the-art titanium oxide (TiO2) ETL prepared by means of high-temperature processing technology requires a long preparation time and a lot of energy consumption; and the low-temperature processed species always present unfavourable electrical properties. In this work, we demonstrate that photoactivated transition metal dichalcogenide quantum dots (TMDC QDs, MoS2 and MoSe2) boosted a low-temperature processed TiO2 (L-TiO2) ETL for all-inorganic CsPbBr3 PSCs without a hole-transporting layer or precious metal electrode. Arising from the photogenerated electron injection from TMDC QDs to L-TiO2 under light irradiation, the electronic trap states and the electron mobility of ETL were effectively regulated, which in turn significantly enhanced the electron extraction from perovskite to the L-TiO2 ETL and reduced the carrier recombination. Finally, the optimal CsPbBr3 PSC achieves an enhanced power conversion efficiency of 10.02% with an ultrahigh open-circuit voltage of 1.615 V and excellent long-term stability, providing a new path to efficient photovoltaic devices.
- 1 April 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (16) , 7784-7791
Photoactivated transition metal dichalcogenides to boost electron extraction for all-inorganic tri-brominated planar perovskite solar cells
The band-energy structure, electron mobility and electronic trap states of the electron-transporting layer (ETL) are critical for perovskite solar cells (PSCs). However, the state-of-the-art titanium oxide (TiO2) ETL prepared by means of high-temperature processing technology requires a long preparation time and a lot of energy consumption; and the low-temperature processed species always present unfavourable electrical properties. In this work, we demonstrate that photoactivated transition metal dichalcogenide quantum dots (TMDC QDs, MoS2 and MoSe2) boosted a low-temperature processed TiO2 (L-TiO2) ETL for all-inorganic CsPbBr3 PSCs without a hole-transporting layer or precious metal electrode. Arising from the photogenerated electron injection from TMDC QDs to L-TiO2 under light irradiation, the electronic trap states and the electron mobility of ETL were effectively regulated, which in turn significantly enhanced the electron extraction from perovskite to the L-TiO2 ETL and reduced the carrier recombination. Finally, the optimal CsPbBr3 PSC achieves an enhanced power conversion efficiency of 10.02% with an ultrahigh open-circuit voltage of 1.615 V and excellent long-term stability, providing a new path to efficient photovoltaic devices.
- 23 January 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 8 (9) , 3017-3022
Vertically conductive MoS 2 pyramids with a high density of active edge sites for efficient hydrogen evolution
Due to the thickness-independent vertical conductivity and high density of active edge sites, MoS 2 pyramids demonstrate a highly enhanced HER performance compared to that of MoS 2 triangular flakes.
- 23 January 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 8 (9) , 3017-3022
Vertically conductive MoS 2 pyramids with a high density of active edge sites for efficient hydrogen evolution
Due to the thickness-independent vertical conductivity and high density of active edge sites, MoS 2 pyramids demonstrate a highly enhanced HER performance compared to that of MoS 2 triangular flakes.
- 20 February 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 123 (10) , 5833-5839
Core–Shell MoS2@CoO Electrocatalyst for Water Splitting in Neural and Alkaline Solutions
- 20 February 2019
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 123 (10) , 5833-5839
Core–Shell MoS2@CoO Electrocatalyst for Water Splitting in Neural and Alkaline Solutions
- 28 June 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (28) , 23444-23450
Transparent Glass with the Growth of Pyramid-Type MoS2 for Highly Efficient Water Disinfection under Visible-Light Irradiation
Water disinfection is of great importance for human health and daily life. Photocatalysts with high-efficiency, green environmental protection and narrow bandgap are critical for the practical water treatment. Here, a general approach is reported for the direct growth of pyramid-type MoS2 (pyramid MoS2) on the transparent glass by chemical vapor deposition (CVD). The pyramid MoS2 exhibits the smaller bandgap and higher bactericidal activity than most TiO2-based photocatalysts. The adjustable bandgap nature of two-dimensional (2-D) MoS2 can harvest a wide spectrum of sunlight and provide more active sites to generate reactive oxygen species (ROS) for bacterial death in water. Furthermore, several nanometers thick silver (Ag) is thermally evaporated on the pyramid MoS2, which can greatly facilitate electron-hole pair separation to generate more ROS and originally has a certain bactericidal effect. With our established approach, under simulated visible light, more than 99.99 % of Escherichia coli (E. coli) can be successfully deactivated in 40 min, with an effective mass per unit of less than 0.7 mg L-1 in a 0.9 wt.% NaCl solution. Besides, for the first time, the generation of ROS is confirmed with in situ Raman spectroscopy on pyramid MoS2@Ag glass, and the related bactericidal mechanism is present as well.
- 28 June 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (28) , 23444-23450
Transparent Glass with the Growth of Pyramid-Type MoS2 for Highly Efficient Water Disinfection under Visible-Light Irradiation
Water disinfection is of great importance for human health and daily life. Photocatalysts with high-efficiency, green environmental protection and narrow bandgap are critical for the practical water treatment. Here, a general approach is reported for the direct growth of pyramid-type MoS2 (pyramid MoS2) on the transparent glass by chemical vapor deposition (CVD). The pyramid MoS2 exhibits the smaller bandgap and higher bactericidal activity than most TiO2-based photocatalysts. The adjustable bandgap nature of two-dimensional (2-D) MoS2 can harvest a wide spectrum of sunlight and provide more active sites to generate reactive oxygen species (ROS) for bacterial death in water. Furthermore, several nanometers thick silver (Ag) is thermally evaporated on the pyramid MoS2, which can greatly facilitate electron-hole pair separation to generate more ROS and originally has a certain bactericidal effect. With our established approach, under simulated visible light, more than 99.99 % of Escherichia coli (E. coli) can be successfully deactivated in 40 min, with an effective mass per unit of less than 0.7 mg L-1 in a 0.9 wt.% NaCl solution. Besides, for the first time, the generation of ROS is confirmed with in situ Raman spectroscopy on pyramid MoS2@Ag glass, and the related bactericidal mechanism is present as well.
- 21 May 2018
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 10 (24) , 11578-11584
Robust ferromagnetism in zigzag-edge rich MoS2 pyramids
Robust ferromagnetism in zigzag-edge rich MoS2 pyramids with a clearly identified remnant and switchable magnetic moment.
- 21 May 2018
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 10 (24) , 11578-11584
Robust ferromagnetism in zigzag-edge rich MoS2 pyramids
Robust ferromagnetism in zigzag-edge rich MoS2 pyramids with a clearly identified remnant and switchable magnetic moment.
- 6 February 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (9) , 8026-8035
Ultrathin Alumina Mask-Assisted Nanopore Patterning on Monolayer MoS2 for Highly Catalytic Efficiency in Hydrogen Evolution Reaction
Nanostructured molybdenum disulfide (MoS2) has been considered as one of the most promising catalysts in the hydrogen evolution reaction (HER), for its approximately intermediate hydrogen binding free energy to noble metals and much lower cost. The catalytically active sites of MoS2 are along the edges, while thermodynamically MoS2 favors the presence of a two-dimensional (2-D) basal plane and the catalytically active atoms only constitute a small portion of the material. The lack of catalytically active sites and low catalytic efficiency impede its massive application. To address the issue, we have activated the basal plane of monolayer 2H MoS2 through an ultra-thin alumina mask (UTAM)-assisted nanopore arrays patterning, creating a high edge density. The introduced catalytically active sites are identified by Cu electrochemical deposition, and the hydrogen generation properties are assessed in detail. We demonstrate a remarkably improved HER performance as well as the identical catalysis of the artificial edges and the pristine metallic edges of monolayer MoS2. Such a porous monolayer nanostructure can achieve a much higher edge atom ratio than the pristine monolayer MoS2 flakes, which can lead to a much improved catalytic efficiency. This controllable edge engineering can also be extended to the basal plane modifications of other 2-D materials, for improving their edge-related properties.
- 6 February 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (9) , 8026-8035
Ultrathin Alumina Mask-Assisted Nanopore Patterning on Monolayer MoS2 for Highly Catalytic Efficiency in Hydrogen Evolution Reaction
Nanostructured molybdenum disulfide (MoS2) has been considered as one of the most promising catalysts in the hydrogen evolution reaction (HER), for its approximately intermediate hydrogen binding free energy to noble metals and much lower cost. The catalytically active sites of MoS2 are along the edges, while thermodynamically MoS2 favors the presence of a two-dimensional (2-D) basal plane and the catalytically active atoms only constitute a small portion of the material. The lack of catalytically active sites and low catalytic efficiency impede its massive application. To address the issue, we have activated the basal plane of monolayer 2H MoS2 through an ultra-thin alumina mask (UTAM)-assisted nanopore arrays patterning, creating a high edge density. The introduced catalytically active sites are identified by Cu electrochemical deposition, and the hydrogen generation properties are assessed in detail. We demonstrate a remarkably improved HER performance as well as the identical catalysis of the artificial edges and the pristine metallic edges of monolayer MoS2. Such a porous monolayer nanostructure can achieve a much higher edge atom ratio than the pristine monolayer MoS2 flakes, which can lead to a much improved catalytic efficiency. This controllable edge engineering can also be extended to the basal plane modifications of other 2-D materials, for improving their edge-related properties.
- 30 January 2018
- Published by IOP Publishing in Nanotechnology
- Vol. 29 (10) , 105402
Ultrathin MoS 2 -coated Ag@Si nanosphere arrays as an efficient and stable photocathode for solar-driven hydrogen production
Solar-driven photoelectrochemical (PEC) water splitting has attracted a great deal of attention recently. Silicon (Si) is an ideal light absorber for solar energy conversion. However, the poor stability and inefficient surface catalysis of Si photocathodes for the hydrogen evolution reaction (HER) have remained key challenges. Alternatively, MoS 2 has been reported to exhibit excellent catalysis performance if sufficient active sites for the HER are available. Here, ultrathin MoS 2 nanoflakes are directly synthesized to coat arrays of Ag-core Si-shell nanospheres (Ag@Si NSs) by using chemical vapor deposition. Due to the high surface area ratio and large curvature of these NSs, the as-grown MoS 2 nanoflakes can accommodate more active sites. In addition, the high-quality coating of MoS 2 nanoflakes on the Ag@Si NSs protects the photocathode from damage during the PEC reaction. An photocurrent density of 33.3 mA cm −2 at a voltage of −0.4 V is obtained versus the reversible hydrogen electrode. The as-prepared nanostructure as a hydrogen photocathode is evidenced to have high stability over 12 h PEC performance. This work opens up opportunities for composite photocathodes with high activity and stability using cheap and stable co-catalysts.
- 30 January 2018
- Published by IOP Publishing in Nanotechnology
- Vol. 29 (10) , 105402
Ultrathin MoS 2 -coated Ag@Si nanosphere arrays as an efficient and stable photocathode for solar-driven hydrogen production
Solar-driven photoelectrochemical (PEC) water splitting has attracted a great deal of attention recently. Silicon (Si) is an ideal light absorber for solar energy conversion. However, the poor stability and inefficient surface catalysis of Si photocathodes for the hydrogen evolution reaction (HER) have remained key challenges. Alternatively, MoS 2 has been reported to exhibit excellent catalysis performance if sufficient active sites for the HER are available. Here, ultrathin MoS 2 nanoflakes are directly synthesized to coat arrays of Ag-core Si-shell nanospheres (Ag@Si NSs) by using chemical vapor deposition. Due to the high surface area ratio and large curvature of these NSs, the as-grown MoS 2 nanoflakes can accommodate more active sites. In addition, the high-quality coating of MoS 2 nanoflakes on the Ag@Si NSs protects the photocathode from damage during the PEC reaction. An photocurrent density of 33.3 mA cm −2 at a voltage of −0.4 V is obtained versus the reversible hydrogen electrode. The as-prepared nanostructure as a hydrogen photocathode is evidenced to have high stability over 12 h PEC performance. This work opens up opportunities for composite photocathodes with high activity and stability using cheap and stable co-catalysts.