Li Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Li Han has a total of 80 co-authors. Here are the top co-authors by number of shared publications:
- Ngo Van Nong
Technical University of Denmark
15 shared publications - Nini Pryds
Technical University of Denmark
13 shared publications - So/Ren Linderoth
Department of Energy Conversion and Storage, Technical University of Denmark, Risø Campus, 4000 Roskilde, Denmark
9 shared publications - Le Thanh Hung
Department of Energy Conversion and Storage Technical University of Denmark DTU Risø Campus 4000 Roskilde Denmark
7 shared publications Hongcai He
University of Electronic Science and Technology of China, State Key Laboratory of Electronic Thin Films and Integrated Devices, Chengdu, PR China
5 shared publicationsBenjamin Balke
Institute of Inorganic and Analytical Chemistry, Johannes Gutenberg University, Mainz, Germany
3 shared publications
Latest Publications
- 1 March 2017
- Published by Elsevier in Synthetic Metals
- Vol. 225, 49-54
Thermal operating window for PEDOT:PSS films and its related thermoelectric properties
- 1 March 2017
- Published by Elsevier in Synthetic Metals
- Vol. 225, 49-54
Thermal operating window for PEDOT:PSS films and its related thermoelectric properties
- 1 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Silicon doped InP as an alternative plasmonic material for mid-infrared
Silicon-doped InP is grown on top of semi-insulating iron-doped and sulfur-doped InP substrates by metal-organic vapor phase epitaxy (MOVPE), and the growth parameters are adjusted to obtain various free carrier concentrations from 1.05×1019 cm-3 up to 3.28×1019 cm-3. Mid-infrared (IR) reflection spectra of the samples with different carrier concentrations are used to retrieve pertaining dielectric functions as the key factor for understanding plasmonic behavior of InP:Si in the mid-IR wavelength range.
- 1 December 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Silicon doped InP as an alternative plasmonic material for mid-infrared
Silicon-doped InP is grown on top of semi-insulating iron-doped and sulfur-doped InP substrates by metal-organic vapor phase epitaxy (MOVPE), and the growth parameters are adjusted to obtain various free carrier concentrations from 1.05×1019 cm-3 up to 3.28×1019 cm-3. Mid-infrared (IR) reflection spectra of the samples with different carrier concentrations are used to retrieve pertaining dielectric functions as the key factor for understanding plasmonic behavior of InP:Si in the mid-IR wavelength range.
- 18 November 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (112) , 111457-111464
Promising bulk nanostructured Cu2Se thermoelectrics via high throughput and rapid chemical synthesis
Bulk nano-Cu2Se with low thermal conductivity and high thermoelectric efficiency was fabricated via a facile and high yield synthesis route.
- 18 November 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (112) , 111457-111464
Promising bulk nanostructured Cu2Se thermoelectrics via high throughput and rapid chemical synthesis
Bulk nano-Cu2Se with low thermal conductivity and high thermoelectric efficiency was fabricated via a facile and high yield synthesis route.
- Open Access
- 11 July 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (31) , 12221-12231
Scandium-doped zinc cadmium oxide as a new stable n-type oxide thermoelectric material
Scandium-doped zinc cadmium oxide (Sc-doped ZnCdO) is proposed as a new n-type oxide thermoelectric material. The material is sintered in air to maintain the oxygen stoichiometry and avoid instability issues. The successful alloying of CdO with ZnO at a molar ratio of 1 : 9 significantly reduced the thermal conductivity by up to 7-fold at room temperature. By carefully selecting the Sc-dopant concentrations, a high power factor of 7.1 × 10−4 W m−1 K−2 at 1173 K could be obtained. Therefore, the highest ZT ∼ 0.3 at 1173 K was achieved for the Zn0.9Cd0.1Sc0.01O1.015 sample, and it has so far one of the highest ZT values among those reported for ZnO based thermoelectric materials over the temperature range, e.g., its ZT value at 300 K, which is 0.012, is over 1 order of magnitude higher than that of the state-of-the-art nanostructured Al-doped ZnO, which is 0.0013. It suggests that this material is a good candidate for improving the overall conversion efficiencies in oxide thermoelectric modules. Meanwhile, Sc-doped ZnCdO is robust in air at high temperatures, whereas other n-type materials, such as Al-doped ZnO, will experience rapid degradation of their electrical conductivity and ZT.
- 11 July 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (31) , 12221-12231
Open AccessScandium-doped zinc cadmium oxide as a new stable n-type oxide thermoelectric material
Scandium-doped zinc cadmium oxide (Sc-doped ZnCdO) is proposed as a new n-type oxide thermoelectric material. The material is sintered in air to maintain the oxygen stoichiometry and avoid instability issues. The successful alloying of CdO with ZnO at a molar ratio of 1 : 9 significantly reduced the thermal conductivity by up to 7-fold at room temperature. By carefully selecting the Sc-dopant concentrations, a high power factor of 7.1 × 10−4 W m−1 K−2 at 1173 K could be obtained. Therefore, the highest ZT ∼ 0.3 at 1173 K was achieved for the Zn0.9Cd0.1Sc0.01O1.015 sample, and it has so far one of the highest ZT values among those reported for ZnO based thermoelectric materials over the temperature range, e.g., its ZT value at 300 K, which is 0.012, is over 1 order of magnitude higher than that of the state-of-the-art nanostructured Al-doped ZnO, which is 0.0013. It suggests that this material is a good candidate for improving the overall conversion efficiencies in oxide thermoelectric modules. Meanwhile, Sc-doped ZnCdO is robust in air at high temperatures, whereas other n-type materials, such as Al-doped ZnO, will experience rapid degradation of their electrical conductivity and ZT.
- Open Access
- 10 June 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (64) , 59565-59573
Effects of spark plasma sintering conditions on the anisotropic thermoelectric properties of bismuth antimony telluride
Bismuth antimony telluride Bi0.4Sb1.6Te3 samples were prepared under various conditions using spark plasma sintering and the effects on the anisotropic thermoelectric properties and microstructure evolutions were systematically investigated.
- 10 June 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (64) , 59565-59573
Open AccessEffects of spark plasma sintering conditions on the anisotropic thermoelectric properties of bismuth antimony telluride
Bismuth antimony telluride Bi0.4Sb1.6Te3 samples were prepared under various conditions using spark plasma sintering and the effects on the anisotropic thermoelectric properties and microstructure evolutions were systematically investigated.
- 1 March 2016
- Published by Elsevier in Ceramics International
- Vol. 42 (4) , 5312-5318
On the chemical synthesis route to bulk-scale skutterudite materials
- 1 March 2016
- Published by Elsevier in Ceramics International
- Vol. 42 (4) , 5312-5318
On the chemical synthesis route to bulk-scale skutterudite materials
- 6 November 2015
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 45 (1) , 594-601
On the Challenges of Reducing Contact Resistances in Thermoelectric Generators Based on Half-Heusler Alloys
- 6 November 2015
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 45 (1) , 594-601
On the Challenges of Reducing Contact Resistances in Thermoelectric Generators Based on Half-Heusler Alloys
- 27 August 2015
- Published by Wiley in Energy Technology
- Vol. 3 (11) , 1143-1151
Segmented Thermoelectric Oxide‐Based Module for High‐Temperature Waste Heat Harvesting
We report a high‐performance thermoelectric (TE) oxide‐based module using the segmentation of half‐Heusler Ti0.3Zr0.35Hf0.35CoSb0.8Sn0.2and misfit‐layered cobaltite Ca3Co4O9+δas the p‐leg and 2 % Al‐doped ZnO as the n‐leg. The maximum output power of a 4‐couple segmented module at ΔT=700 K attains a value of approximately 6.5 kW m−2, which is three times higher than that of the best reported non‐segmented oxide module. The TE properties of individual legs, as well as the interfacial contact resistances, were characterized as a function of temperature. Numerical modeling was used to predict the efficiency and to evaluate the influence of the electrical and thermal losses on the performance of TE modules. Initial long‐term stability tests of the module at the hot and the cold side temperatures of 1073 K and 444 K, respectively, showed a promising result with 4 % degradation for 48 h operating in air.
- 27 August 2015
- Published by Wiley in Energy Technology
- Vol. 3 (11) , 1143-1151
Segmented Thermoelectric Oxide‐Based Module for High‐Temperature Waste Heat Harvesting
We report a high‐performance thermoelectric (TE) oxide‐based module using the segmentation of half‐Heusler Ti0.3Zr0.35Hf0.35CoSb0.8Sn0.2and misfit‐layered cobaltite Ca3Co4O9+δas the p‐leg and 2 % Al‐doped ZnO as the n‐leg. The maximum output power of a 4‐couple segmented module at ΔT=700 K attains a value of approximately 6.5 kW m−2, which is three times higher than that of the best reported non‐segmented oxide module. The TE properties of individual legs, as well as the interfacial contact resistances, were characterized as a function of temperature. Numerical modeling was used to predict the efficiency and to evaluate the influence of the electrical and thermal losses on the performance of TE modules. Initial long‐term stability tests of the module at the hot and the cold side temperatures of 1073 K and 444 K, respectively, showed a promising result with 4 % degradation for 48 h operating in air.
- 1 July 2015
- Published by Elsevier in Energy Conversion and Management
- Vol. 99, 20-27
High performance p-type segmented leg of misfit-layered cobaltite and half-Heusler alloy
- 1 July 2015
- Published by Elsevier in Energy Conversion and Management
- Vol. 99, 20-27
High performance p-type segmented leg of misfit-layered cobaltite and half-Heusler alloy
- 20 March 2015
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 51 (33) , 7140-7143
A novel CO2- and SO2-tolerant dual phase composite membrane for oxygen separation
Here we report a novel, cheap, non-toxic, CO2- and SO2-stable dual phase composite oxygen transport membrane (Al0.02Ga0.02Zn0.96O1.02–Gd0.1Ce0.9O1.95−δ) for oxygen separation.
- 20 March 2015
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 51 (33) , 7140-7143
A novel CO2- and SO2-tolerant dual phase composite membrane for oxygen separation
Here we report a novel, cheap, non-toxic, CO2- and SO2-stable dual phase composite oxygen transport membrane (Al0.02Ga0.02Zn0.96O1.02–Gd0.1Ce0.9O1.95−δ) for oxygen separation.