HJHyungmok Joh

Hyungmok Joh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hyungmok Joh has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Massively Parallel Microbubble Nano-Assembly

    by Hyungmok Joh, Shaw-Long Hsueh, Zhichao Ma, Peer Fischer, Donglei Emma Fan

    Microbubbles are an important tool due to their unique mechanical, acoustic, and dynamical properties. While there has been remarkable progress, it remains challenging to generate addressable microbubbles quickly in a parallel and controlled manner. In this work, we present an opto-electrochemical method that combines the precision of light-based imaging with the relatively low energy bubble formation by hydrolysis. In addition, we show that the inclusion of nanoparticles enables individually addressable microbubbles to be formed in designed patterns. The size of the bubbles can be controlled from a few micrometers to over hundred micrometers with a spatial accuracy of ~ 2 - µm. The light intensity required is only ~ 0.1 W/cm2, which is on par with sunlight and several orders of magnitude lower than that required by other state-of-the-art techniques. The technique is general and permits a wide spectrum of particles to be assembled from suspension, ranging from 40-nm silver nanocrystals, 200 nm polymer nanospheres, to 2-µm-E-coli bacterial cells. We demonstrate particle assembly in well-defined patterns, and show how Ag nanoparticle-bacterial-cell arrays can be formed that permit the spectroscopic detection of cell metabolites. Overall, the reported microbubble tool overcomes multiple key challenges in microbubble-based technologies and promises new opportunities in nanomanufacturing, nanophotonic patterning, nanorobotics, biosensing, and single-cell biotechnology.

  • Open Access

    Light-stimulated micromotor swarms in an electric field with accurate spatial, temporal, and mode control

    by Zexi Liang, Hyungmok Joh, Bin Lian, Donglei Emma Fan

    Swarming, a phenomenon widely present in nature, is a hallmark of nonequilibrium living systems that harness external energy into collective locomotion. The creation and study of manmade swarms may provide insights into their biological counterparts and shed light to the rules of life. Here, we propose an innovative mechanism for rationally creating multimodal swarms with unprecedented spatial, temporal, and mode control. The research is realized in a system made of optoelectric semiconductor nanorods that can rapidly morph into three distinct modes, i.e., network formation, collectively enhanced rotation, and droplet-like clustering, pattern, and switch in-between under light stimulation in an electric field. Theoretical analysis and semiquantitative modeling well explain the observation by understanding the competition between two countering effects: the electrostatic assembly for orderliness and electrospinning-induced disassembly for disorderliness. This work could inspire the rational creation of new classes of reconfigurable swarms for both fundamental research and emerging applications.


  • Ink-Lithography for Property Engineering and Patterning of Nanocrystal Thin Films

    by Junhyuk Ahn, Sanghyun Jeon, Ho Kun Woo, Junsung Bang, Yong Min Lee, Steven J. Neuhaus, Woo Seok Lee, Taesung Park, Sang Yeop Lee, Byung Ku Jung, et al.

    Next-generation devices and systems require the development and integration of advanced materials, the realization of which inevitably requires two separate processes: property engineering and patterning. Here, we report a one-step, ink-lithography technique to pattern and engineer the properties of thin films of colloidal nanocrystals that exploits their chemically addressable surface. Colloidal nanocrystals are deposited by solution-based methods to form thin films and a local chemical treatment is applied using an ink-printing technique to simultaneously modify (i) the chemical nature of the nanocrystal surface to allow thin-film patterning and (ii) the physical electronic, optical, thermal, and mechanical properties of the nanocrystal thin films. The ink-lithography technique is applied to the library of colloidal nanocrystals to engineer thin films of metals, semiconductors, and insulators on both rigid and flexible substrates and demonstrate their application in high-resolution image replications, anticounterfeit devices, multicolor filters, thin-film transistors and circuits, photoconductors, and wearable multisensors.


  • Materials and Schemes of Multimodal Reconfigurable Micro/Nanomachines and Robots: Review and Perspective

    by Hyungmok Joh, Donglei Emma Fan

    Mechanically programmable, reconfigurable micro/nanoscale materials that can dynamically change their mechanical properties or behaviors, or morph into distinct assemblies or swarms in response to stimuli have greatly piqued the interest of the science community due to their unprecedented potentials in both fundamental research and technological applications. To date, a variety of designs of hard and soft materials, as well as actuation schemes based on mechanisms including chemical reactions and magnetic, acoustic, optical, and electric stimuli, have been reported. Herein, state‐of‐the‐art micro/nanostructures and operation schemes for multimodal reconfigurable micro/nanomachines and swarms, as well as potential new materials and working principles, challenges, and future perspectives are discussed.


  • Surface Design of Nanocrystals for High-Performance Multifunctional Sensors in Wearable and Attachable Electronics

    by Hyungmok Joh, Woo Seok Lee, Min Su Kang, Mingi Seong, Haneun Kim, Junsung Bang, Seung-Wook Lee, Ashraf Hossain, Soong Ju Oh


  • Synergetic effects of ligand exchange and reduction process enhancing both electrical and optical properties of Ag nanocrystals for multifunctional transparent electrodes

    by Min Su Kang, Hyungmok Joh, Haneun Kim, Hye-Won Yun, Donggyu Kim, Ho Kun Woo, Woo Seok Lee, Sung-Hoon Hong, Soong Ju Oh

    In this work, we introduce a low cost, room-temperature and atmospheric pressure based chemical method to produce highly transparent, conductive, and flexible nano-mesh structured electrodes using Ag nanocrystals (NCs). Sequential treatments of ligand exchange and reduction processes were developed to engineer the optoelectronic properties of Ag NC thin films. Combinatorial analysis indicates that the origin of the relatively low conductivity comes from the non-metallic compounds that are introduced during ligand exchange. The reduction process successfully removed these non-metallic compounds, yielding structurally uniform, optically more transparent, dispersive, and electrically more conductive thin films. We optimized the design of Ag NC thin film mesh structures, and achieved low sheet resistance (9.12 Ω □−1), high optical transmittance (94.7%), and the highest figure of merit (FOM) of 6.37 × 10−2. Solution processed flexible transparent heaters, touch pads, and wearable sensors are demonstrated, emphasizing the potential applications of Ag NC transparent electrodes in multifunctional sensors and devices.


  • Designing Metallic and Insulating Nanocrystal Heterostructures to Fabricate Highly Sensitive and Solution Processed Strain Gauges for Wearable Sensors

    by Woo Seok Lee, Seung‐Wook Lee, Hyungmok Joh, Mingi Seong, Haneun Kim, Min Su Kang, Ki‐Hyun Cho, Yun‐Mo Sung, Soong Ju Oh

    All‐solution processed, high‐performance wearable strain sensors are demonstrated using heterostructure nanocrystal (NC) solids. By incorporating insulating artificial atoms of CdSe quantum dot NCs into metallic artificial atoms of Au NC thin film matrix, metal–insulator heterostructures are designed. This hybrid structure results in a shift close to the percolation threshold, modifying the charge transport mechanism and enhancing sensitivity in accordance with the site percolation theory. The number of electrical pathways is also manipulated by creating nanocracks to further increase its sensitivity, inspired from the bond percolation theory. The combination of the two strategies achieves gauge factor up to 5045, the highest sensitivity recorded among NC‐based strain gauges. These strain sensors show high reliability, durability, frequency stability, and negligible hysteresis. The fundamental charge transport behavior of these NC solids is investigated and the combined site and bond percolation theory is developed to illuminate the origin of their enhanced sensitivity. Finally, all NC‐based and solution‐processed strain gauge sensor arrays are fabricated, which effectively measure the motion of each finger joint, the pulse of heart rate, and the movement of vocal cords of human. This work provides a pathway for designing low‐cost and high‐performance electronic skin or wearable devices.


  • Engineering the Charge Transport of Ag Nanocrystals for Highly Accurate, Wearable Temperature Sensors through All-Solution Processes

    by Hyungmok Joh, Seung-Wook Lee, Mingi Seong, Woo Seok Lee, Soong Ju Oh

    All‐nanocrystal (NC)‐based and all‐solution‐processed wearable resistance temperature detectors (RTDs) are introduced. The charge transport mechanisms of Ag NC thin films are engineered through various ligand treatments to design high performance RTDs. Highly conductive Ag NC thin films exhibiting metallic transport behavior with high positive temperature coefficients of resistance (TCRs) are achieved through tetrabutylammonium bromide treatment. Ag NC thin films showing hopping transport with high negative TCRs are created through organic ligand treatment. All‐solution‐based, one‐step photolithography techniques that integrate two distinct opposite‐sign TCR Ag NC thin films into an ultrathin single device are developed to decouple the mechanical effects such as human motion. The unconventional materials design and strategy enables highly accurate, sensitive, wearable and motion‐free RTDs, demonstrated by experiments on moving or curved objects such as human skin, and simulation results based on charge transport analysis. This strategy provides a low cost and simple method to design wearable multifunctional sensors with high sensitivity which could be utilized in various fields such as biointegrated sensors or electronic skin.


  • Engineering surface ligands of nanocrystals to design high performance strain sensor arrays through solution processes

    by S.-W. Lee, H. Joh, M. Seong, W. S. Lee, J.-H. Choi, S. J. Oh

    We demonstrate solution processed and nanocrystal based wearable strain sensor arrays with high sensitivity and stability.