Lanshu Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lanshu Xu has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Xiaojuan Jin
MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy, Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing, China
6 shared publications Mengying Jia
MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy, Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing, People's Republic of China
5 shared publicationsJianmin Gao
MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy, Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing 100083, People's Republic of China
3 shared publicationsLinlin Cui
MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy, Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing 100083, People's Republic of China
2 shared publicationsYue Li
MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy, Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing 100083, People's Republic of China
2 shared publications- Yue Li
MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy, Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing 100083, China
2 shared publications
Latest Publications
- Open Access
- 11 November 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16  (49) , 67379-67389
Controllable assembly of low-dielectric polycarbonate/boron nitride nanosheet porous aerogel composite membranes with pore-wall thermal-conductive networks
Porous PC/BNNS aerogel films: preparation, microstructure, thermal and dielectric properties.
- 11 November 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16  (49) , 67379-67389
Open AccessControllable assembly of low-dielectric polycarbonate/boron nitride nanosheet porous aerogel composite membranes with pore-wall thermal-conductive networks
Porous PC/BNNS aerogel films: preparation, microstructure, thermal and dielectric properties.
- Open Access
- 16 November 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13  (48) , 34291-34298
Self-assembled boron nitride nanosheet-based aerogels as support frameworks for efficient thermal energy storage phase change materials
Phase change materials (PCMs) are promising in many fields related to energy utilization and thermal management. However, the low thermal conductivity and poor shape stability of PCMs restrict their direct thermal energy conversion and storage. The desired properties for PCMs are not only high thermal conductivity and excellent shape stability, but also high latent heat retention. In this study, the boron nitride nanosheets (BNNSs) were bridged by small amounts of GO nanosheets and successfully self-assembled into BNNS/rGO (BG) aerogels by hydrothermal and freeze-drying processes. The BG aerogels with interlaced macro-/micro-pores have been proven to be ideally suited as support frameworks for encapsulating polyethylene glycol (PEG). The obtained composite PCMs exhibit high thermal conductivity (up to 1.12 W m−1 K−1), excellent shape stability (maintain at 90 °C for 10 min), and high latent heat (187.2 J g−1) with a retention of 97.3% of the pure PEG, presenting great potential applications in energy storage systems and thermal management of electronic devices.
- 16 November 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13  (48) , 34291-34298
Open AccessSelf-assembled boron nitride nanosheet-based aerogels as support frameworks for efficient thermal energy storage phase change materials
Phase change materials (PCMs) are promising in many fields related to energy utilization and thermal management. However, the low thermal conductivity and poor shape stability of PCMs restrict their direct thermal energy conversion and storage. The desired properties for PCMs are not only high thermal conductivity and excellent shape stability, but also high latent heat retention. In this study, the boron nitride nanosheets (BNNSs) were bridged by small amounts of GO nanosheets and successfully self-assembled into BNNS/rGO (BG) aerogels by hydrothermal and freeze-drying processes. The BG aerogels with interlaced macro-/micro-pores have been proven to be ideally suited as support frameworks for encapsulating polyethylene glycol (PEG). The obtained composite PCMs exhibit high thermal conductivity (up to 1.12 W m−1 K−1), excellent shape stability (maintain at 90 °C for 10 min), and high latent heat (187.2 J g−1) with a retention of 97.3% of the pure PEG, presenting great potential applications in energy storage systems and thermal management of electronic devices.
- 14 May 2019
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 166  (8) , A1636-A1643
Highly Flexible and Durable Graphene Hybrid Film Electrode Modified with Aminated β-Cyclodextrin for Supercapacitor
The aminated beta-cyclodextrin (β-CD-N) molecules were first used to modify graphene for fabricating the hybrid film electrode (G/β-CD-N) using a method combining mild water bath heat-treatment and vacuum filtration. As compared with pure graphene film (G) and beta-cyclodextrin (β-CD) modified graphene film (G/β-CD), the prepared G/β-CD-N hybrid film exhibits better hydrophilic property, thermal stability and higher mechanical flexibility. Particularly, the G/β-CD-N hybrid film has a remarkably high areal specific capacitance (614 mF cm−2 at 0.5 mA cm−2), good mechanical flexibility (maintaining 98.2% for 1000 bending/unbending cycles) and long-term cycle stability (maintaining 96.8% for 10000 charge/discharge cycles). Moreover, the assembled G/β-CD-N based flexible and symmetric all-solid-state supercapacitor shows an excellent volumetric specific capacitance of 22.53 F cm−3 at 0.5 mA cm−2 and a high energy density of 3.13 mWh cm−3 at a power density of 0.014 W cm−3. The high comprehensive performances of the developed hybrid film electrodes can be ascribed to the combined effects of β-CD molecules and the amination process. This work provides a new approach for the fabrication of flexible supercapacitor with high performance.
- 14 May 2019
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 166  (8) , A1636-A1643
Highly Flexible and Durable Graphene Hybrid Film Electrode Modified with Aminated β-Cyclodextrin for Supercapacitor
The aminated beta-cyclodextrin (β-CD-N) molecules were first used to modify graphene for fabricating the hybrid film electrode (G/β-CD-N) using a method combining mild water bath heat-treatment and vacuum filtration. As compared with pure graphene film (G) and beta-cyclodextrin (β-CD) modified graphene film (G/β-CD), the prepared G/β-CD-N hybrid film exhibits better hydrophilic property, thermal stability and higher mechanical flexibility. Particularly, the G/β-CD-N hybrid film has a remarkably high areal specific capacitance (614 mF cm−2 at 0.5 mA cm−2), good mechanical flexibility (maintaining 98.2% for 1000 bending/unbending cycles) and long-term cycle stability (maintaining 96.8% for 10000 charge/discharge cycles). Moreover, the assembled G/β-CD-N based flexible and symmetric all-solid-state supercapacitor shows an excellent volumetric specific capacitance of 22.53 F cm−3 at 0.5 mA cm−2 and a high energy density of 3.13 mWh cm−3 at a power density of 0.014 W cm−3. The high comprehensive performances of the developed hybrid film electrodes can be ascribed to the combined effects of β-CD molecules and the amination process. This work provides a new approach for the fabrication of flexible supercapacitor with high performance.
- 18 July 2018
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 165  (10) , A2217-A2224
Graphene Hydrogel Decorated with N, O Co-Doped Carbon Dots for Flexible Supercapacitor Electrodes
Waste fiberboards were used to produce N, O co-doped carbon dots (CDs) by acid etching method. The graphene hydrogels decorated with N, O co-doped CDs (GCD) were synthesized via hydrothermal method and optimized through different mass ratios. The optimal composite electrode exhibited a high specific capacitance of 335.1 F g−1 at 1 A g−1, and a good mechanical flexibility with about 90.6% capacitance retention after 500 bending/unbending cycles. Furthermore, the assembled flexible supercapacitor owned an ideal cycling stability of 83.4% after 10000 charge/discharge cycles at 5 A g−1. Such results demonstrated that N, O co-doped CDs played an essential and unique role in composite graphene hydrogel for improving the electrochemical performance of the flexible supercapacitor.
- 18 July 2018
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 165  (10) , A2217-A2224
Graphene Hydrogel Decorated with N, O Co-Doped Carbon Dots for Flexible Supercapacitor Electrodes
Waste fiberboards were used to produce N, O co-doped carbon dots (CDs) by acid etching method. The graphene hydrogels decorated with N, O co-doped CDs (GCD) were synthesized via hydrothermal method and optimized through different mass ratios. The optimal composite electrode exhibited a high specific capacitance of 335.1 F g−1 at 1 A g−1, and a good mechanical flexibility with about 90.6% capacitance retention after 500 bending/unbending cycles. Furthermore, the assembled flexible supercapacitor owned an ideal cycling stability of 83.4% after 10000 charge/discharge cycles at 5 A g−1. Such results demonstrated that N, O co-doped CDs played an essential and unique role in composite graphene hydrogel for improving the electrochemical performance of the flexible supercapacitor.
- 7 June 2018
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 165  (9) , A1706-A1712
Tannic Acid-Decorated Spongy Graphene for Flexible and High Performance Supercapacitors
A simple method was developed to prepare tannic acid-decorated spongy graphene hydrogel (TAGH) as interconnected, three-dimensional (3D) porous network supercapacitor electrode materials. Tannic acid (TA) not only can be fully competent in reducing graphene oxide and stabilizing reduced graphene oxide, but also can prevent graphene sheets from agglomerating by suppressing the π-π stacking interactions. Such 3D porous TAGH electrodes with low charge transfer resistance of 0.4 Ω.cm2 displayed a maximum specific capacitance of 533 F/g at 0.5 A/g. The assembled TAGH supercapacitor showed a good cycling stability (84.6% capacitance retention after 8000 charging/discharging cycles) and mechanical flexibility (93.4% capacitance retention after 500 folding/unfolding cycles). Remarkably, the flexible device can achieve superior energy density of 37.0 Wh/kg and higher power density of 4476.7 W/kg. These results demonstrate a great potential for application of 3D TAGH electrodes in flexible, high performance wearable electronics and energy storage devices.
- 7 June 2018
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 165  (9) , A1706-A1712
Tannic Acid-Decorated Spongy Graphene for Flexible and High Performance Supercapacitors
A simple method was developed to prepare tannic acid-decorated spongy graphene hydrogel (TAGH) as interconnected, three-dimensional (3D) porous network supercapacitor electrode materials. Tannic acid (TA) not only can be fully competent in reducing graphene oxide and stabilizing reduced graphene oxide, but also can prevent graphene sheets from agglomerating by suppressing the π-π stacking interactions. Such 3D porous TAGH electrodes with low charge transfer resistance of 0.4 Ω.cm2 displayed a maximum specific capacitance of 533 F/g at 0.5 A/g. The assembled TAGH supercapacitor showed a good cycling stability (84.6% capacitance retention after 8000 charging/discharging cycles) and mechanical flexibility (93.4% capacitance retention after 500 folding/unfolding cycles). Remarkably, the flexible device can achieve superior energy density of 37.0 Wh/kg and higher power density of 4476.7 W/kg. These results demonstrate a great potential for application of 3D TAGH electrodes in flexible, high performance wearable electronics and energy storage devices.
- Open Access
- 28 November 2017
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164  (14) , A3614-A3619
Natural Organic Phytate Modified Graphene Hydrogel for Flexible Supercapacitor Electrodes
A simple and template-free method for fabrication of a modified porous graphene hydrogel electrode was developed. The method involved adding natural organic phytate in the pure graphene hydrogels. Benefiting from the introduced phosphate groups and positively charged metal ions, the flexible magnesium phytate/graphene (Mg-P/G) hydrogel electrode showed large specific capacitance of 281 F/g with a small charge transfer resistance of 0.3 Ω. Furthermore, the flexible supercapacitor showed prominent cycling stability (about 100% retention in capacitance over 10000 cycles) and excellent mechanical flexibility (about 97.5% of its original capacitance after 500 bending cycles).
- 28 November 2017
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164  (14) , A3614-A3619
Open AccessNatural Organic Phytate Modified Graphene Hydrogel for Flexible Supercapacitor Electrodes
A simple and template-free method for fabrication of a modified porous graphene hydrogel electrode was developed. The method involved adding natural organic phytate in the pure graphene hydrogels. Benefiting from the introduced phosphate groups and positively charged metal ions, the flexible magnesium phytate/graphene (Mg-P/G) hydrogel electrode showed large specific capacitance of 281 F/g with a small charge transfer resistance of 0.3 Ω. Furthermore, the flexible supercapacitor showed prominent cycling stability (about 100% retention in capacitance over 10000 cycles) and excellent mechanical flexibility (about 97.5% of its original capacitance after 500 bending cycles).
- Open Access
- 21 September 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7  (71) , 45066-45074
Synthesis and characterization of free-standing activated carbon/reduced graphene oxide film electrodes for flexible supercapacitors
Free-standing, binder-free and flexible activated carbon/reduced graphene oxide (AC/rGO) composite films with various ratios were fabricated via a facile vacuum-filtration process. It was proved that two-dimensional rGO sheets were an ideal adhesive support for AC. The optimal ratio (AC : rGO = 2 : 1) was determined and the film electrodes displayed a high area specific capacitance of 486 mF cm−2 with a mass of 2.35 mg cm−2 (specific capacitance of 207 F g−1) at 0.2 mA cm−2. The assembled supercapacitor had the advantages of being flexible, lightweight, cheap and environmentally friendly, and can achieve a superior energy density of 16.2 μW h cm−2 at a power density of 100 μW cm−2 and 85% capacitance retention after 10 000 charging/discharging cycles. Moreover, 90% of the capacitance was retained after 1000 bending cycles and there was almost no performance change under different bending angles. These results well demonstrated a great potential for application of AC/rGO film electrodes in wearable and portable electronics.
- 21 September 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7  (71) , 45066-45074
Open AccessSynthesis and characterization of free-standing activated carbon/reduced graphene oxide film electrodes for flexible supercapacitors
Free-standing, binder-free and flexible activated carbon/reduced graphene oxide (AC/rGO) composite films with various ratios were fabricated via a facile vacuum-filtration process. It was proved that two-dimensional rGO sheets were an ideal adhesive support for AC. The optimal ratio (AC : rGO = 2 : 1) was determined and the film electrodes displayed a high area specific capacitance of 486 mF cm−2 with a mass of 2.35 mg cm−2 (specific capacitance of 207 F g−1) at 0.2 mA cm−2. The assembled supercapacitor had the advantages of being flexible, lightweight, cheap and environmentally friendly, and can achieve a superior energy density of 16.2 μW h cm−2 at a power density of 100 μW cm−2 and 85% capacitance retention after 10 000 charging/discharging cycles. Moreover, 90% of the capacitance was retained after 1000 bending cycles and there was almost no performance change under different bending angles. These results well demonstrated a great potential for application of AC/rGO film electrodes in wearable and portable electronics.
- Open Access
- 19 June 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7  (50) , 31342-31351
Design and synthesis of graphene/activated carbon/polypyrrole flexible supercapacitor electrodes
A ternary composite of graphene/activated carbon/polypyrrole (GN/AC/PPy) used as an electrode active material for supercapacitors has been synthesized via vacuum filtration and anodic constant current deposition methods. The ACs sandwiched between GN sheets can be used as flexible substrates for PPy nanoparticles, and the microscopic morphologies and electrochemical performances of GN/AC/PPy electrodes were synthesized and designed through regulating different deposition current densities and deposition times. The GN/AC/PPy15-200 s electrode exhibits a maximum areal specific capacitance of 906 mF cm−2 with a PPy loading mass of 2.75 mg cm−2 (specific capacitance of 178 F g−1) at a current density of 0.5 mA cm−2. Its capacitance retention still remained at 64.4% after 5000 charge–discharge cycles and 83.6% after 500 stretching–bending cycles at a current density of 3 mA cm−2. The flexible, free-standing and binder-free GN/AC/PPy electrodes have a broad prospect in flexible energy storage devices.
- 19 June 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7  (50) , 31342-31351
Open AccessDesign and synthesis of graphene/activated carbon/polypyrrole flexible supercapacitor electrodes
A ternary composite of graphene/activated carbon/polypyrrole (GN/AC/PPy) used as an electrode active material for supercapacitors has been synthesized via vacuum filtration and anodic constant current deposition methods. The ACs sandwiched between GN sheets can be used as flexible substrates for PPy nanoparticles, and the microscopic morphologies and electrochemical performances of GN/AC/PPy electrodes were synthesized and designed through regulating different deposition current densities and deposition times. The GN/AC/PPy15-200 s electrode exhibits a maximum areal specific capacitance of 906 mF cm−2 with a PPy loading mass of 2.75 mg cm−2 (specific capacitance of 178 F g−1) at a current density of 0.5 mA cm−2. Its capacitance retention still remained at 64.4% after 5000 charge–discharge cycles and 83.6% after 500 stretching–bending cycles at a current density of 3 mA cm−2. The flexible, free-standing and binder-free GN/AC/PPy electrodes have a broad prospect in flexible energy storage devices.