YDYingchao Du

Yingchao Du

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yingchao Du has a total of 206 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Physics-informed neural network for photoacoustic tomography reconstruction

    by Zhan Shen, Hao Ding, Jiayi Sun, Qili Tian, Zhijun Chi, Qiao Li, Yingchao Du, Xiaoping Ouyang, Chuanxiang Tang

    Objective. Conventional photoacoustic tomography (PAT) reconstruction algorithms often suffer from performance degradation under complex media and non-ideal detection conditions. To tackle these limitations, we propose a novel reconstruction method based on physics-informed neural networks (PINNs). Approach. The network model is optimized with constraints from observational data, wave equation, and initial conditions, to reconstruct the spatial distribution of initial acoustic pressure. The PINN framework further incorporates time reversal method to improve computational efficiency. Main results. Comprehensive PAT simulations demonstrate that the PINN achieves superior reconstruction quality compared with conventional algorithms. The PINN exhibits favorable adaptivity to both heterogeneous and lossy media, and strong robustness against noisy measurements, sparse sensor layouts and limited-view detection geometries. Significance. The PINN integrates the physical interpretability and the powerful capability of neural networks to represent continuous acoustic pressure fields. It eliminates the requirement for training datasets, offering broad application potential for PAT.

  • A novel method for measuring the energy spectrum of an inverse Compton scattering source based on nuclear resonance fluorescence

    by Jin Lin, Hao Ding, Hongze Zhang, Xuanqi Zhang, Jiayi Sun, Shuhao Zhang, Zhi Zhang, Zhijun Chi, Yingchao Du, Chuanxiang Tang

    Inverse Compton scattering (ICS) gamma ray sources are capable of producing quasi-monochromatic, continuously tunable, high-brightness, precisely polarization-controllable, and ultrashort gamma ray pulses in the energy range from tens of keV to several MeV or even higher. The energy spectrum measurement of an ICS source not only serves as a key indicator of the device operating status but also provides foundational information. In this paper, we proposed a novel method of using nuclear resonance fluorescence (NRF) as a probe for spectrum measurements. By utilizing the continuous tunability of an ICS source, NRF photons can be excited at different points across the spectrum. The shape of the energy spectrum can then be effectively scanned and reconstructed by recording the relative NRF yields at different energy points. The feasibility of the proposed method was validated by Geant4 simulations of measuring NRF photon emission from 56Fe irradiated by an ICS source. We utilized the 845 and 3449 keV NRF photons of 56Fe to measure a Gaussian spectrum and a segmented Gaussian spectrum, which correspond to ICS spectra under different collection angles. The simulation results showed high precision for quasi-monochromatic gamma ray spectrum measurements, with a normalized root mean square error of less than 5%. To maintain a sufficient signal-to-noise ratio during the measurement, the energy resolution of detectors is suggested to be less than 1% of the energy being measured. Given an energy tuning precision of ΔE, the minimum measurable width of the energy spectrum, in terms of standard deviation, can reach 0.85 ΔE. Further experiments are needed to validate its practical feasibility.

  • Open Access

    In situ photonuclear conversion of radiation- 1 resistant 229Th:SrF2 nuclear clock crystals

    by Xueqing Yan, Di Wu, Haoyang Lan, Qiaorui Gong, Meizhi Wang, Zhongyi Chen, Tianyi Zhang, Xinlu Xu, Yanying Zhao, Yixing Geng, et al.

    The nuclear isomer 229mTh, with its ∼8 eV excitation energy, is a prime can didate for a nuclear clock that will revolutionize precision measurement and fundamental physics. Recent breakthroughs in the observation of 229mTh radia tive decay and the direct nuclear laser excitation in 229Th-doped crystals have inspired a series of foundational works towards the realization of a solid-state nuclear clock. However, the global scarcity of 229Th, extracted mainly from 233U decay, along with material science challenges in fabricating highly doped 229 Th crystalline targets, such as radiation discoloration, present a severe bottleneck of nuclear clock developments. Here, we present a solution to these challenges by demonstrating in situ conversion of 232Th-doped crystals into 229Th-doped vari ants. Utilizing the naturally abundant 232Th isotope as a precursor enables safe and scalable production of SrF2 crystals for solid-state nuclear clocks. Through photonuclear reactions induced by bremsstrahlung from an electron beam, we experimentally verify this photonuclear conversion technique in 232Th:SrF2 and 232Th:CaF2 crystals while preserving their VUV transparency. This process gen- erates 229m,gTh along with parent isotopes 229Ac and 229Ra via (γ, 3n), (γ, 2np), and (γ, n2p) reactions. Off-line γ-ray spectroscopy reveals 229Th concen trations of order 109 cm−3. Using a high-flux broadband gamma ray sources, 229Th concentrations at 1015 cm−3 can potentially be achieved within sev- eral hours, comparable to crystals used in direct laser excitation experiments. Moreover, while VUV spectroscopy of irradiated SrF2 and CaF2 crystals shows evidence of direct photon decay from 229mTh, the VUV transparency of SrF2 crystal basically recovered without any annealing, which is of great importance for irradiation production of 229Th and long-term timekeeping. This approach overcomes critical limitations in isotope availability and radioactives handling, paving the way for the exploration of various solid-state host crystals and scalable production of nuclear clocks.

  • Terahertz-driven nanotip field-emission electron gun and cascaded acceleration

    by Wentao Yu, Nongchao Tan, Kai Peng, Sijie Fan, Yixiao Fu, Kai Jiang, Zhao Yun, Longding Wang, Renkai Li, Yingchao Du, et al.

    This paper reports two versions of terahertz (THz)-driven nanotip field-emission electron guns: single-layer reflective guns (SLRGs) and double-layer reflective guns (DLRGs). SLRGs employ a reflective structure to superimpose the initial and subsequent half-cycles of the THz electric field, enhancing the field amplitude and acceleration efficiency. Experimental results demonstrate its superior acceleration efficiency over a single-layer non-reflective gun (SLNRG) with identical input, providing direct validation of the concept. Theoretically, the single-feed SLRG can match the dual-feed SLNRG's acceleration efficiency while offering significantly simpler synchronization. DLRGs comprise two independent reflective structures, each with individual THz injection. By precisely scanning the delay between the two incident THz beams, we demonstrate THz-driven cascaded electron acceleration, which represents a direct experimental demonstration and a pioneering step of cascaded acceleration in THz-driven electron sources. The experimental results of DLRGs align closely with the results of electron dynamics predicted by simulations, establishing the foundation for developing multi-layer high-acceleration-efficiency THz-driven high-energy electron guns. The ability to manipulate the THz for each layer individually holds promising potential for improving the performance of THz electron guns.


  • Open Access

    Laser-induced streaking of MeV electrons in liquid medium

    by Jie Yang, Keke Chen, Peng Lv, Bo Huang, Longteng Yun, Yingchao Du, Baiting Song, Jiayue Wang, Qianci Wang, Zhiyuan Wang, et al.

    Free-electron–laser interactions in liquids constitute a fundamental process underpinning a broad range of ultrafast spectroscopic and diffraction techniques, including time-resolved photoelectron spectroscopy, attosecond spectroscopy, and ultrafast electron diffraction. Despite their central role, the interaction between free electrons and optical fields in a liquid environment remains largely unexplored. Here, we present a comprehensive study of laser-induced streaking (LIS) of MeV electrons in liquids using a state-of-the-art liquid-phase ultrafast electron diffraction (LUED) setup. We identify a streaking mechanism distinct from the gas phase: instead of plasma lensing, liquid-phase LIS arises from a direct electron-light interaction mediated by the liquid's dielectric response, regardless of whether the laser intensity is above or below the ionization threshold. This conclusion is supported by the dependencies of the streaking on laser incident angle, laser field strength, liquid thickness, and the resulting distortion of scattering patterns. Furthermore, we demonstrate that LIS can be completely suppressed at near-colinear electron-laser incidence, even above the ionization threshold. Our findings elucidate a previously unknown interaction mechanism and provide critical guidance for preventing scattering pattern corruption in future LUED experiments.

  • Open Access

    Simulation of x-ray fluorescence ghost imaging by inverse Compton scattering source: A feasibility study

    by Zhan Shen, Hao Ding, Zhijun Chi, Qiao Li, Yingchao Du, Xiaoping Ouyang, Chuanxiang Tang

    X-ray fluorescence computed tomography (XFCT) has shown great potential in molecular biomedical imaging. However, conventional XFCT has some limitations, including sensitivity and a trade-off between spatial resolution and dose. X-ray fluorescence ghost imaging (XRF-GI) makes it possible to realize high-resolution imaging with low doses. However, the efficient implantation of XRF-GI requires a quasi-monochromatic x-ray source. The inverse Compton scattering (ICS) source could meet the requirement well. In this study, we developed a Monte Carlo simulation model of an XRF-GI system based on the Geant4 toolkit. The simulation model was composed of an ICS source, a series of Hadamard pattern-based masks as a modulating system, a single-pixel energy-resolving detector, and a phantom embedded with gold nanoparticles (GNPs) of different concentrations as the contrast agent. The image reconstructed by the total variation-regularized least squares (L2-TV) algorithm was evaluated by four criteria, including the mean square error, the contrast-to-noise ratio, the coefficient of determination (R2), and the limit of detection. Compared to XFCT, the reconstructed image of XRF-GI has better performance in all four criteria, and the dose of XRF-GI was halved without a decrease in resolution. It was validated that the beam properties of the ICS source fitted well with the implantation of XRF-GI for different conditions. In conclusion, the XRF-GI by an ICS source has great potential for biomedical imaging.


  • Open Access

    Chicane-based beam loading compensation for high average current electron bunch trains

    by Xiaoyang Zhang, Pengwei Huang, Yingchao Du, Renkai Li, Chuanxiang Tang

    High average current and high-brightness electron bunch trains enable a broad range of accelerator-based facilities to explore scientific frontiers with higher resolution and efficiency. The beam loading effect induced by high beam currents strongly influences the beam dynamics and is a critical challenge for normal-conducting linacs operating in burst mode. Effective compensation methods are essential for enhancing beam quality. Traditional compensation techniques often require the addition of extra compensation structures or dedicated power supply components, which increases both the cost and complexity of the accelerator system. In this paper, we propose a novel beam loading compensation method by employing chicanes, which are commonly utilized in accelerator-based facilities, to adjust the spacing between bunches for optimal phase tuning during acceleration. Simulation results for an electron injector design show a root mean square energy spread of less than 2 × 10 − 4 and a transverse normalized emittance below 0.5 mm mrad for a 1 A bunch train. Published by the American Physical Society 2025

  • Open Access

    Atomistic visualization of photoinduced electron transfer process in a nonpolar solvent

    by Jie Yang, Bo Huang, Zhiyuan Wang, Keke Chen, Shijie Zheng, Yingchao Du, Peng Lv, Baiting Song, Qianci Wang, Longteng Yun, et al.

    Electron transfer, the process of one electron relocating from one chemical entity to another, is one of the most ubiquitous elementary reactions and plays a critical role in almost all fields of chemistry. While seminal theories such as Marcus theory have provided foundational frameworks for electron transfer, they rely on postulated atomistic pictures that have never been directly observed. For instance, Marcus theory describes electron transfer is driven by solvent reorganization, which is only verified indirectly through the observation of the Marcus inverted region. Here, we present a direct atomic-resolution measurement of nuclear motion during electron transfer in the liquid phase, achieved using mega-electron-volt liquid-phase ultrafast electron diffraction. Instead of solvent reorganization, we observe that the back-electron transfer following photoionization in neat CCl4 proceeds with a ballistic cleavage of a C–Cl bond, followed by a 1.7-Å shuttling of the chlorine nucleus between donor and acceptor, accompanied by a 0.6-Å umbrella opening on both sides. These nuclear motions facilitate an ultrafast intermolecular back-electron transfer within 340 fs. Our findings demonstrate that the atomistic details of electron transfer involve complicated multidimensional nuclear motions across donor, acceptor, and solvent molecules, which goes far beyond the framework of Marcus theory.

  • Experimental investigation of the feasibility of in situ plasma cleaning in normal-conducting copper cavities

    by Qianxu Xia, Lianmin Zheng, Yingchao Du

    High-frequency copper cavities in particle accelerators often experience dark current enhancement and performance degradation over prolonged operation. To address these issues, it is essential to remove copper oxide from the cavity walls while simultaneously suppressing field emission. A 13.56 MHz inductively coupled plasma platform with integrated coils was developed at Tsinghua University to assess the feasibility of in situ plasma treatment for restoring high-frequency performance. Experiments conducted on this platform focused on optimizing plasma discharge parameters and treatment protocols. The results demonstrate that the “argon/oxygen + argon/hydrogen” method effectively removes hydrocarbons and copper oxides from ultra-smooth, oxygen-free copper surfaces while passivating surface burrs. This dual-action treatment is helpful in reducing field emission, consequently lowering the dark current. It is also helpful to enhance the high-frequency performance and operation stability of the copper cavity. These findings validate the potential of in situ plasma cleaning as an effective technology for restoring and maintaining the performance of high-frequency copper cavities.