FGFabien Giroud

Fabien Giroud

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Fabien Giroud has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Biomatériaux d'électrode appliqués à la réalisation et à la caractérisation d'un biocapteur immunologique et de biopiles enzymatiques

    by Fabien Giroud

    Ce mémoire est consacré au développement d'un immunocapteur impédancemétrique et de deux biopiles enzymatiques. Premièrement, le poly(pyrrole-NHS) est utilisé pour l'immobilisation successive d'un modèle de la ciprofloxacine (CF) et de l'anticorps dirigé spécifiquement contre CF. La détection est réalisée par la spectroscopie d'impédance électrochimique. Elle détecte le déplacement en solution de l'anticorps. Le seuil de détection est de 1.10-12 g.mL-1. Deuxièmement, la production énergétique est abordée suivant deux approches. La première se base sur l'apparition d'un gradient de pH produit par deux enzymes (la GOx et l'uréase) et converti en f.e.m. en utilisant un couple rédox sensible au pH. La seconde, repose sur les propriétés biocatalytiques de la GOx d'oxyder le glucose et de la polyphénol oxydase de réduire le dioxygène. Cette pile est capable de fonctionner aussi bien in vitro que in vivo. Une fois optimisée, la pile affiche une f.e.m. de 315 mV et une puissance de 27 μW.

  • Thiol–yne click chemistry on carbon nanotubes for mediated bioelectrocatalytic glucose oxidation

    by Monica Brachi, Fabien Giroud, Serge Cosnier, Alan Le Goff

    We report the modification of carbon nanotubes with both alkyne-modified diazonium salts and alkyne-modified pyrene followed by photo-irradiated thiol–yne click reaction with thiol-modified ferrocene and phenanthrenequinone derivatives. Photo-irradiation proves to provide the most efficient reaction yields for the thiol–yne reaction on surfaces, as demonstrated by electrochemistry and XPS. The as-functionalized carbon nanotubes achieve the mediated bioelectrocatalytic glucose oxidation by adsorbed flavin-dependent glucose dehydrogenases (FAD-GDH) at low overpotential and high current density of 4.80 mA cm−2.


  • Stretchable and Flexible Buckypaper‐Based Lactate Biofuel Cell for Wearable Electronics

    by Xiaohong Chen, Lu Yin, Jian Lv, Andrew J. Gross, Minh Le, Nathaniel Georg Gutierrez, Yang Li, Itthipon Jeerapan, Fabien Giroud, Anastasiia Berezovska, et al.

    This work demonstrates a stretchable and flexible lactate/O2 biofuel cell (BFC) using buckypaper (BP) composed of multi‐walled carbon nanotubes as the electrode material. Free‐standing BP, functionalized with a pyrene‐polynorbornene homopolymer, is fabricated as the immobilization matrix for lactate oxidase (LOx) at the anode and bilirubin oxidase at the cathode. This biofuel cell delivers an open circuit voltage of 0.74 V and a high‐power density of 520 µW cm−2. The functionalized BP electrodes are assembled onto a stretchable screen‐printed current collector with an “island–bridge” configuration, which ensures conformal contact between the wearable BFC and the human body and endows the BFC with excellent performance stability under stretching condition. When applied to the arm of the volunteer, the BFC can generate a maximum power of 450 µW. When connected with a voltage booster, the on‐body BFC is able to power a light emitting diode under both pulse discharge and continuous discharge modes during exercise. This demonstrates the promising potential of the flexible BP‐based BFC as a self‐sustained power source for next‐generation wearable electronics.


  • (Invited) Redox Active Metallic and Glyco-Based Nanoparticles for Enzymatic Bioelectrocatalysis

    by Xiaohong Chen, Jules L. Hammond, Andrew J. Gross, Fabien Giroud, Redouane Borsali, Serge Cosnier

    The clean production of electrical energy from renewable resources has received recently a growing attention from the research community. A way to achieve this goal is the use of biological catalysts to catalyze the oxidation of renewable fuels. One of the streamlines on the research dealing with green electrical energy production is represented by oxidoreductase enzymes as the biocatalysts. Thanks to their specificity towards their respective substrates and activity in relatively mild conditions (pH, temperature, etc…), they are ideal candidates to replace noble metals regularly found in fuel cells. However, due to low power densities achieved utilizing these redox proteins and their limited stability; enzymatic fuel cells (EFCs) are so far only envisioned to power small and disposable electronic devices. In most literature reports, the redox enzymes are essentially immobilized on chemically modified electrode surfaces. There, they harvest and convert the chemical energy stored in fuels and turn it into electrical energy. The growing field in bioelectrocatalysis is beneficial not only for the biofuel cell technology but also for the design of efficient biosensing or bioreactor devices. In this presentation, we will focus on two different approaches for the design of EFCs currently studied in our laboratory. The rationalization of the electrode surface requirement to achieve efficient bioelectrocatalysis (mediated or direct electron transfer) [1] allowed for the synthesis of redox active gold nanoparticles (AuNPs) bearing electroactivable nitro groups and negatively charged groups. The obtained hydroxylamine-modified AuNPs are catalytically active for nicotinamide adenine dinucleotide (NADH) oxidation and for NAD+ regeneration in bioelectrocatalysis (with NAD-dependent glucose dehydrogenase). In contrast, the same particles possessing also negatively charged carboxylic groups had been shown to favorably orientate some multi-copper oxidases having their T1 copper center facing the metallic particles and consequently enhancing oxygen electroreduction. On the other hand, we will also present our recent strategy to design solubilized enzymatic fuel cell (SEFC). The entrapment of different redox mediator is accomplished by host-guest interaction with β-cyclodextrin-coated glyconanoparticles for the mediated glucose and oxygen conversion [2,3]. Hence, the cell was designed with permselective membranes to enable substrate and proton diffusion while trapping the enzymes and redox glyconanoparticles in separate compartments. The SEFC suffered a limited power loss of about 25% after 7 days of continuous charge-discharge cycling at 50 µA [3]. References [1] F. Giroud, K. Sawada, M. Taya, S. Cosnier, Biosens. Bioelectron., 2017, 87, 957-963. [2] A. J. Gross, X. Chen, F. Giroud, C. Travelet, R. Borsali, S. Cosnier, J. Am. Chem. Soc., 2017, 139, 16076-16079. [3] J. L. Hammond, A. J. Gross, F. Giroud, C. Travelet, R. Borsali, S. Cosnier, ACS Energy Lett., 2019, 4, 142-148.

  • Solubilized Enzymatic Fuel Cell (SEFC) for Quasi-Continuous Operation Exploiting Carbohydrate Block Copolymer Glyconanoparticle Mediators

    by Jules L. Hammond, Andrew J. Gross, Fabien Giroud, Christophe Travelet, Redouane Borsali, Serge Cosnier


  • Comparison of Commercial and Lab‐made MWCNT Buckypaper: Physicochemical Properties and Bioelectrocatalytic O2 Reduction

    by Xiaohong Chen, Andrew J. Gross, Fabien Giroud, Michael Holzinger, Serge Cosnier

    Buckypapers have emerged as an important material for the construction of enzyme‐based electrodes and biofuel cells for energy harvesting. In this work, commercial and lab‐made buckypapers have been compared to establish their properties for future use as advanced bioelectrodes. The physical properties of the paper‐like carbon nanotube films were characterised by electron microscopy, four‐point probe conductivity, X‐ray photoelectron spectroscopy and Raman spectroscopy. The electrochemical properties were investigated by voltammetry in the absence and presence of redox probes. Bioelectrocatalytic oxygen reduction was evaluated with iron‐protoporphyrin modified buckypapers after immobilisation of bilirubin oxidase. Lab‐made buckypaper exhibited a wider potential window, lower background capacitance, and cleaner voltammetry compared to commercial buckypaper. The catalytic current of lab‐made buckypaper was 10‐fold larger due to factors which include the 10‐fold larger BET surface area, higher enzyme loading, more defective structure, and the smaller nanotube diameters. The presence of porphyrin groups enhanced the catalytic current in O2‐saturated solution up to 0.5 mA cm−2 and 1.3 mA cm−2 for commercial and lab‐made buckypaper, respectively. This work sheds new light on the effects of various physicochemical properties on the electrochemical and DET‐type bioelectrocatalytic activity of buckypapers, and promises to be important for the development of bioelectronics devices.


  • Redox-Active Glyconanoparticles as Electron Shuttles for Mediated Electron Transfer with Bilirubin Oxidase in Solution

    by Andrew J. Gross, Xiaohong Chen, Fabien Giroud, Christophe Travelet, Redouane Borsali, Serge Cosnier

    We demonstrate self-assembly, characterization and bioelectrocatalysis of redox-active cyclodextrin-coated nanoparticles. The nanoparticles with host–guest functionality are easy to assemble and permit entrapment of hydrophobic redox molecules in aqueous solution. Bis-pyrene-ABTS encapsulated nanoparticles were investigated electrochemically and spectroscopically. Their use as electron shuttles is demonstrated via an intraelectron transfer chain between neighboring redox units of clustered particles (Dh,DLS = 195 nm) and the mono- and trinuclear Cu sites of bilirubin oxidases. Enhanced current densities for mediated O2 reduction are observed with the redox nanoparticle system compared to equivalent bioelectrode cells with dissolved mediator. Improved catalytic stability over 2 days was also observed with the redox nanoparticles, highlighting a stabilizing effect of the polymeric architecture. Bioinspired nanoparticles as mediators for bioelectrocatalysis promises to be valuable for future biofuel cells and biosensors.