Pablo Ríos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Pablo Ríos has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
- Salvador Conejero
Instituto de Investigaciones Químicas (IIQ) Departamento de Química Inorgánica Centro de Innovación en Química Avanzada (ORFEO-CINQA) CSIC and Universidad de Sevilla Avda. Américo Vespucio 49 41092 Sevilla Spain
13 shared publications - Amor Rodríguez
Instituto de Investigaciones Químicas, Departamento de Química Inorgánica, CSIC-Universidad de Sevilla-Centro de Innovación en Química Avanzada (ORFEO-CINQA), c/Américo Vespucio 49, 41092, Sevilla, Spain
10 shared publications - Francisco José Fernández-De-Córdova
Instituto de Investigaciones Químicas (IIQ), Departamento de química Inorgánica, Universidad de Sevilla, Avenida Américo Vespucio 49, Sevilla, 41092, Spain
10 shared publications - Matthew S. See
Department of Chemistry, University of California, Berkeley, Berkeley, California 94720-1460, USA
7 shared publications - T. Don Tilley
Department of Chemistry, University of California, Berkeley, Berkeley, California 94720, USA
7 shared publications - Agustí Lledós
Departament de Química Universitat Autònoma de Barcelona Barcelona Spain
6 shared publications
Latest Publications
- Open Access
- 29 May 2026
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 45 (14) , 1635-1638
Flash Communication: Double Migratory Insertion in Digold(I) Acetylides
This work describes the sequential double insertion of dimethyl acetylenedicarboxylate (DMAD) into NHC-supported dinuclear gold(I) acetylides of the type NHC–Au–(C≡C)n–Au–NHC. By extending the acetylide linker in IPr–Au–C≡C–C≡C–Au–IPr (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) or using sterically reduced NHC ligands in IiPr–Au–C≡C–Au–IiPr (IiPr = 1,3-bis(isopropyl)imidazol-2-ylidene), the steric constraints that previously limited reactivity to single insertions have been overcome. These findings highlight how ligand tuning can unlock new reactivity patterns in bimetallic gold architectures.
- 29 May 2026
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 45 (14) , 1635-1638
Open AccessFlash Communication: Double Migratory Insertion in Digold(I) Acetylides
This work describes the sequential double insertion of dimethyl acetylenedicarboxylate (DMAD) into NHC-supported dinuclear gold(I) acetylides of the type NHC–Au–(C≡C)n–Au–NHC. By extending the acetylide linker in IPr–Au–C≡C–C≡C–Au–IPr (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) or using sterically reduced NHC ligands in IiPr–Au–C≡C–Au–IiPr (IiPr = 1,3-bis(isopropyl)imidazol-2-ylidene), the steric constraints that previously limited reactivity to single insertions have been overcome. These findings highlight how ligand tuning can unlock new reactivity patterns in bimetallic gold architectures.
- Open Access
- 5 December 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (13) , 7153-7160
Haptotropic Phenomena in Digold(I) Triple-Bonded Complexes
Addition of either IPrAuOTf or IPrCuOTf (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene; OTf = trifluoromethanesulfonate anion) to the digold acetylide IPrAuC≡CAuIPr results in the selective formation of the corresponding trimetallic cationic species [IPrAuC≡C(π-MIPr)AuIPr][OTf] (M = Au or Cu). Variable-temperature 1H NMR experiments (VT-NMR) reveal that while the homotrimetallic gold complex exhibits dynamic σ,π-exchange in solution at temperatures even as low as -130 °C, the heterometallic analogue presents a static scenario. On the other hand, extension of the acetylide bridge by one additional acetylide unit using IPrAuC≡C-C≡CAuIPr introduces a new fluxional process in the corresponding analogous trimetallic compounds [IPrAuC≡C(π-MIPr)-C≡CAuIPr][OTf] (M = Au or Cu), namely π,π-exchange. In the case of the copper-containing complex, this exchange occurs even at low temperatures, whereas exchange can be thermally arrested in the trigold system at temperatures below -10 °C. Computational studies indicate that the divergent behavior between gold and copper regarding π,π-exchange does not appear to stem from their interaction with the alkyne fragment but rather in how this interaction changes along the reaction coordinate toward the transition state geometry.
- 5 December 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (13) , 7153-7160
Open AccessHaptotropic Phenomena in Digold(I) Triple-Bonded Complexes
Addition of either IPrAuOTf or IPrCuOTf (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene; OTf = trifluoromethanesulfonate anion) to the digold acetylide IPrAuC≡CAuIPr results in the selective formation of the corresponding trimetallic cationic species [IPrAuC≡C(π-MIPr)AuIPr][OTf] (M = Au or Cu). Variable-temperature 1H NMR experiments (VT-NMR) reveal that while the homotrimetallic gold complex exhibits dynamic σ,π-exchange in solution at temperatures even as low as -130 °C, the heterometallic analogue presents a static scenario. On the other hand, extension of the acetylide bridge by one additional acetylide unit using IPrAuC≡C-C≡CAuIPr introduces a new fluxional process in the corresponding analogous trimetallic compounds [IPrAuC≡C(π-MIPr)-C≡CAuIPr][OTf] (M = Au or Cu), namely π,π-exchange. In the case of the copper-containing complex, this exchange occurs even at low temperatures, whereas exchange can be thermally arrested in the trigold system at temperatures below -10 °C. Computational studies indicate that the divergent behavior between gold and copper regarding π,π-exchange does not appear to stem from their interaction with the alkyne fragment but rather in how this interaction changes along the reaction coordinate toward the transition state geometry.
- Open Access
- 28 November 2025
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 13 (4) , 1524-1532
Catalytic activation of nitrous oxide: boryl versus hydride nickel complexes
The selective reduction of nitrous oxide (N 2 O), a potent greenhouse gas with harmful effects on the ozone layer, remains a significant challenge in small-molecule activation.
- 28 November 2025
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 13 (4) , 1524-1532
Open AccessCatalytic activation of nitrous oxide: boryl versus hydride nickel complexes
The selective reduction of nitrous oxide (N 2 O), a potent greenhouse gas with harmful effects on the ozone layer, remains a significant challenge in small-molecule activation.
- Open Access
- 8 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Haptotropic phenomena in digold(I) triple-bonded complexes
Addition of either IPrAuOTf or IPrCuOTf (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene; OTf = trifluoromethanesulfonate anion) to the digold acetylide IPrAuC≡CAuIPr results in the selective formation of the corresponding trimetallic cationic species [IPrAuC≡C(π-MIPr)AuIPr][OTf] (M = Au or Cu). Variable-temperature 1H NMR experiments (VT-NMR) reveal that while the homotrimetallic gold complex exhibits dynamic σ,π-exchange in solution at temperatures even as low as –130 °C, the heterometallic analogue presents a static scenario. On the other hand, extension of the acetylide bridge by one additional acetylide unit using IPrAuC≡C−C≡CAuIPr introduces a new fluxional process in the corresponding analogous trimetallic compounds [IPrAuC≡C(π-MIPr)−C≡CAuIPr][OTf] (M = Au or Cu), namely π,π-exchange. In the case of the copper-containing complex, this exchange occurs even at low temperatures, whereas exchange can be thermally arrested in the trigold system at temperatures below –10 °C. Computational studies indicate that the divergent behavior between gold and copper regarding π,π-exchange does not appear to stem from their interaction with the alkyne fragment, but rather in how this interaction changes along the reaction coordinate towards the transition state geometry.
- 8 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessHaptotropic phenomena in digold(I) triple-bonded complexes
Addition of either IPrAuOTf or IPrCuOTf (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene; OTf = trifluoromethanesulfonate anion) to the digold acetylide IPrAuC≡CAuIPr results in the selective formation of the corresponding trimetallic cationic species [IPrAuC≡C(π-MIPr)AuIPr][OTf] (M = Au or Cu). Variable-temperature 1H NMR experiments (VT-NMR) reveal that while the homotrimetallic gold complex exhibits dynamic σ,π-exchange in solution at temperatures even as low as –130 °C, the heterometallic analogue presents a static scenario. On the other hand, extension of the acetylide bridge by one additional acetylide unit using IPrAuC≡C−C≡CAuIPr introduces a new fluxional process in the corresponding analogous trimetallic compounds [IPrAuC≡C(π-MIPr)−C≡CAuIPr][OTf] (M = Au or Cu), namely π,π-exchange. In the case of the copper-containing complex, this exchange occurs even at low temperatures, whereas exchange can be thermally arrested in the trigold system at temperatures below –10 °C. Computational studies indicate that the divergent behavior between gold and copper regarding π,π-exchange does not appear to stem from their interaction with the alkyne fragment, but rather in how this interaction changes along the reaction coordinate towards the transition state geometry.
- Open Access
- 8 April 2025
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 90 (15) , 5206-5212
Nickel-Catalyzed Deuteration of Primary, Secondary, and Tertiary Silanes: Scope and Mechanistic Insights
Deuterated silanes are crucial reagents for deuteration, with a diverse range of applications in materials science, pharmaceuticals, and isotopic labeling. While most methods for synthesizing deuterated silanes rely on stoichiometric environmentally harmful processes or noble metal catalysts, research into more sustainable alternatives has received relatively less attention. In this study, we introduce a catalyst based on a nickel PBP-pincer system (PBP = bis(phosphino)boryl), which effectively facilitates catalytic hydrogen/deuterium exchange for primary, secondary, and tertiary silanes, as well as tertiary siloxanes and certain boranes, utilizing a catalyst loading of 2 mol % at 25 °C. DFT calculations identify two reaction pathways that require overcoming similar energy barriers for the H/D exchange step: silane activation assisted by the PBP ligand (ΔG⧧ = 24.1 kcal mol-1) and H/D exchange promoted by nucleophilic Ni-hydride (ΔG⧧ = 22.4 kcal mol-1). These results suggest that both pathways are feasible, with a slight energetic preference for the latter. We also present detailed mechanistic studies, including control experiments, an analysis of catalyst deactivation pathways, and kinetic studies that are in excellent agreement with the outcome of the theoretical calculations.
- 8 April 2025
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 90 (15) , 5206-5212
Open AccessNickel-Catalyzed Deuteration of Primary, Secondary, and Tertiary Silanes: Scope and Mechanistic Insights
Deuterated silanes are crucial reagents for deuteration, with a diverse range of applications in materials science, pharmaceuticals, and isotopic labeling. While most methods for synthesizing deuterated silanes rely on stoichiometric environmentally harmful processes or noble metal catalysts, research into more sustainable alternatives has received relatively less attention. In this study, we introduce a catalyst based on a nickel PBP-pincer system (PBP = bis(phosphino)boryl), which effectively facilitates catalytic hydrogen/deuterium exchange for primary, secondary, and tertiary silanes, as well as tertiary siloxanes and certain boranes, utilizing a catalyst loading of 2 mol % at 25 °C. DFT calculations identify two reaction pathways that require overcoming similar energy barriers for the H/D exchange step: silane activation assisted by the PBP ligand (ΔG⧧ = 24.1 kcal mol-1) and H/D exchange promoted by nucleophilic Ni-hydride (ΔG⧧ = 22.4 kcal mol-1). These results suggest that both pathways are feasible, with a slight energetic preference for the latter. We also present detailed mechanistic studies, including control experiments, an analysis of catalyst deactivation pathways, and kinetic studies that are in excellent agreement with the outcome of the theoretical calculations.
- Open Access
- 13 February 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (11) , 4684-4694
Stepwise alkyne insertion in Au(i) acetylides: influence of the nuclearity
The reaction between NHC-supported (NHC = N-heterocyclic carbene) gold(I) trimethylsilylacetylide complexes with NHC gold(I) hydroxide species renders different symmetrical homobimetallic Au complexes. These compounds readily undergo migratory insertion of DMAD (dimethyl acetylenedicarboxylate) at 25 °C to give the corresponding bimetallic enyne products. On the contrary, monometallic analogues require much more forcing conditions (excess of DMAD and temperature ≥110 °C) to give the same transformation. Experimental and computational studies reveal that the second metal fragment is responsible for the enhanced nucleophilicity of the reactive carbon atom of the acetylide CC bond, which initially leads to a more favorable interaction with DMAD in the rate-determining step of an unprecedented, stepwise mechanism where the lability of the Au–C bonds plays an instrumental role. The enhanced reactivity displayed by the bimetallic species was leveraged in the insertion of other substrates such as heterocumulenes.
- 13 February 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (11) , 4684-4694
Open AccessStepwise alkyne insertion in Au(i) acetylides: influence of the nuclearity
The reaction between NHC-supported (NHC = N-heterocyclic carbene) gold(I) trimethylsilylacetylide complexes with NHC gold(I) hydroxide species renders different symmetrical homobimetallic Au complexes. These compounds readily undergo migratory insertion of DMAD (dimethyl acetylenedicarboxylate) at 25 °C to give the corresponding bimetallic enyne products. On the contrary, monometallic analogues require much more forcing conditions (excess of DMAD and temperature ≥110 °C) to give the same transformation. Experimental and computational studies reveal that the second metal fragment is responsible for the enhanced nucleophilicity of the reactive carbon atom of the acetylide CC bond, which initially leads to a more favorable interaction with DMAD in the rate-determining step of an unprecedented, stepwise mechanism where the lability of the Au–C bonds plays an instrumental role. The enhanced reactivity displayed by the bimetallic species was leveraged in the insertion of other substrates such as heterocumulenes.
- Open Access
- 25 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Non-concerted Alkyne Insertion in Au(I) Acetylides: Influence of the Nuclearity
The reaction between NHC-supported (NHC = N-heterocyclic carbene) gold(I) trimethylsilylacetylide complexes with NHC gold(I) hydroxide species renders different symmetrical homobimetallic Au complexes. These compounds readily undergo migratory insertion of DMAD (dimethyl acetylenedicarboxylate) at 25 °C to give the corresponding bimetallic enyne products. On the contrary, monometallic analogues require much more forcing reaction conditions (excess of DMAD and temperature ≥ 110 °C) to give the same transformation. Experimental and computational studies reveal that the second metal fragment is responsible for the enhanced nucleophilicity of the reactive carbon atom of the acetylide C≡C bond, which initially leads to a more favorable interaction with DMAD in the rate-determining step of an unprecedented, non-concerted mechanism where the lability of the Au−C bonds plays an instrumental role.
- 25 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessNon-concerted Alkyne Insertion in Au(I) Acetylides: Influence of the Nuclearity
The reaction between NHC-supported (NHC = N-heterocyclic carbene) gold(I) trimethylsilylacetylide complexes with NHC gold(I) hydroxide species renders different symmetrical homobimetallic Au complexes. These compounds readily undergo migratory insertion of DMAD (dimethyl acetylenedicarboxylate) at 25 °C to give the corresponding bimetallic enyne products. On the contrary, monometallic analogues require much more forcing reaction conditions (excess of DMAD and temperature ≥ 110 °C) to give the same transformation. Experimental and computational studies reveal that the second metal fragment is responsible for the enhanced nucleophilicity of the reactive carbon atom of the acetylide C≡C bond, which initially leads to a more favorable interaction with DMAD in the rate-determining step of an unprecedented, non-concerted mechanism where the lability of the Au−C bonds plays an instrumental role.
- 22 July 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (67) , 8912-8915
Iron homo- and heterobimetallic complexes supported by a symmetrical dinucleating ligand
The synthesis of Fe/Mn complexes able to model enzymes possessing related cofactors are still a challenge. Herein, we discuss the stepwise synthesis and characterization of a Fe( ii )/Mn( ii ) species and related Fe( ii )/Fe( ii ) complexes.
- 22 July 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (67) , 8912-8915
Iron homo- and heterobimetallic complexes supported by a symmetrical dinucleating ligand
The synthesis of Fe/Mn complexes able to model enzymes possessing related cofactors are still a challenge. Herein, we discuss the stepwise synthesis and characterization of a Fe( ii )/Mn( ii ) species and related Fe( ii )/Fe( ii ) complexes.
- Open Access
- 27 May 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (27)
Electrophilic Hydrosilylation of Electron‐Rich Alkenes Derived from Enamines
The low‐electron count, air‐stable, platinum complexes [Pt(ItBu’)(ItBu)][BArF] (C1) (ItBu=1,3‐di‐tert‐butylimidazol‐2‐ylidene), [Pt(SiPh)3(ItBuiPr)2][BArF] (C2) (ItBuiPr=1‐tert‐butyl‐3‐iso‐propylimidazol‐2‐ylidene), [Pt(SiPh)3(ItBuMe)2][BArF] (C3), [Pt(GePh3)(ItBuiPr)2][BArF] (C4), [Pt(GePh)3(ItBuMe)2][BArF] (C5) and [Pt(GeEt)3(ItBuMe)2][BArF] (C6) (ItBuMe=1‐tert‐butyl‐3‐methylimidazol‐2‐ylidene) are efficient catalysts (particularly the germyl derivatives) in both the silylative dehydrocoupling and hydrosilylation of electron rich alkenes derived from enamines. The steric hindrance exerted by the NHC ligand plays an important role in the selectivity of the reaction. Thus, bulky ligands are selective towards the silylative dehydrocoupling process whereas less sterically hindered promote the selective hydrosilylation reaction. The latter is, in addition, regioselective towards the β‐carbon atom of both internal and terminal enamines, leading to β‐aminosilanes. Moreover, the syn stereochemistry of the amino and silyl groups implies an anti Si−H bond addition across the double bond. All these facts point to a mechanistic picture that, according to experimental and computational studies, involves a non‐classical hydrosilylation process through an outer‐sphere mechanism in which a formal nucleophilic addition of the enamine to the silicon atom of a platinum σ‐SiH complex is the key step. This is in sharp contrast with the classical Chalk–Harrod mechanism prevalent in platinum chemistry.
- 27 May 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (27)
Open AccessElectrophilic Hydrosilylation of Electron‐Rich Alkenes Derived from Enamines
The low‐electron count, air‐stable, platinum complexes [Pt(ItBu’)(ItBu)][BArF] (C1) (ItBu=1,3‐di‐tert‐butylimidazol‐2‐ylidene), [Pt(SiPh)3(ItBuiPr)2][BArF] (C2) (ItBuiPr=1‐tert‐butyl‐3‐iso‐propylimidazol‐2‐ylidene), [Pt(SiPh)3(ItBuMe)2][BArF] (C3), [Pt(GePh3)(ItBuiPr)2][BArF] (C4), [Pt(GePh)3(ItBuMe)2][BArF] (C5) and [Pt(GeEt)3(ItBuMe)2][BArF] (C6) (ItBuMe=1‐tert‐butyl‐3‐methylimidazol‐2‐ylidene) are efficient catalysts (particularly the germyl derivatives) in both the silylative dehydrocoupling and hydrosilylation of electron rich alkenes derived from enamines. The steric hindrance exerted by the NHC ligand plays an important role in the selectivity of the reaction. Thus, bulky ligands are selective towards the silylative dehydrocoupling process whereas less sterically hindered promote the selective hydrosilylation reaction. The latter is, in addition, regioselective towards the β‐carbon atom of both internal and terminal enamines, leading to β‐aminosilanes. Moreover, the syn stereochemistry of the amino and silyl groups implies an anti Si−H bond addition across the double bond. All these facts point to a mechanistic picture that, according to experimental and computational studies, involves a non‐classical hydrosilylation process through an outer‐sphere mechanism in which a formal nucleophilic addition of the enamine to the silicon atom of a platinum σ‐SiH complex is the key step. This is in sharp contrast with the classical Chalk–Harrod mechanism prevalent in platinum chemistry.
- Open Access
- 27 May 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (27) , e202404859
Electrophilic Hydrosilylation of Electron‐Rich Alkenes Derived from Enamines
The low‐electron count, air‐stable, platinum complexes [Pt(ItBu’)(ItBu)][BArF] (C1) (ItBu=1,3‐di‐tert‐butylimidazol‐2‐ylidene), [Pt(SiPh)3(ItBuiPr)2][BArF] (C2) (ItBuiPr=1‐tert‐butyl‐3‐iso‐propylimidazol‐2‐ylidene), [Pt(SiPh)3(ItBuMe)2][BArF] (C3), [Pt(GePh3)(ItBuiPr)2][BArF] (C4), [Pt(GePh)3(ItBuMe)2][BArF] (C5) and [Pt(GeEt)3(ItBuMe)2][BArF] (C6) (ItBuMe=1‐tert‐butyl‐3‐methylimidazol‐2‐ylidene) are efficient catalysts (particularly the germyl derivatives) in both the silylative dehydrocoupling and hydrosilylation of electron rich alkenes derived from enamines. The steric hindrance exerted by the NHC ligand plays an important role in the selectivity of the reaction. Thus, bulky ligands are selective towards the silylative dehydrocoupling process whereas less sterically hindered promote the selective hydrosilylation reaction. The latter is, in addition, regioselective towards the β‐carbon atom of both internal and terminal enamines, leading to β‐aminosilanes. Moreover, the syn stereochemistry of the amino and silyl groups implies an anti Si−H bond addition across the double bond. All these facts point to a mechanistic picture that, according to experimental and computational studies, involves a non‐classical hydrosilylation process through an outer‐sphere mechanism in which a formal nucleophilic addition of the enamine to the silicon atom of a platinum σ‐SiH complex is the key step. This is in sharp contrast with the classical Chalk–Harrod mechanism prevalent in platinum chemistry.
- 27 May 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (27) , e202404859
Open AccessElectrophilic Hydrosilylation of Electron‐Rich Alkenes Derived from Enamines
The low‐electron count, air‐stable, platinum complexes [Pt(ItBu’)(ItBu)][BArF] (C1) (ItBu=1,3‐di‐tert‐butylimidazol‐2‐ylidene), [Pt(SiPh)3(ItBuiPr)2][BArF] (C2) (ItBuiPr=1‐tert‐butyl‐3‐iso‐propylimidazol‐2‐ylidene), [Pt(SiPh)3(ItBuMe)2][BArF] (C3), [Pt(GePh3)(ItBuiPr)2][BArF] (C4), [Pt(GePh)3(ItBuMe)2][BArF] (C5) and [Pt(GeEt)3(ItBuMe)2][BArF] (C6) (ItBuMe=1‐tert‐butyl‐3‐methylimidazol‐2‐ylidene) are efficient catalysts (particularly the germyl derivatives) in both the silylative dehydrocoupling and hydrosilylation of electron rich alkenes derived from enamines. The steric hindrance exerted by the NHC ligand plays an important role in the selectivity of the reaction. Thus, bulky ligands are selective towards the silylative dehydrocoupling process whereas less sterically hindered promote the selective hydrosilylation reaction. The latter is, in addition, regioselective towards the β‐carbon atom of both internal and terminal enamines, leading to β‐aminosilanes. Moreover, the syn stereochemistry of the amino and silyl groups implies an anti Si−H bond addition across the double bond. All these facts point to a mechanistic picture that, according to experimental and computational studies, involves a non‐classical hydrosilylation process through an outer‐sphere mechanism in which a formal nucleophilic addition of the enamine to the silicon atom of a platinum σ‐SiH complex is the key step. This is in sharp contrast with the classical Chalk–Harrod mechanism prevalent in platinum chemistry.