Ronaldo Hoffmann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ronaldo Hoffmann has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
- Flávio Dias Mayer
Department of Chemical Engineering, Federal University of Santa Maria, Santa Maria, Brazil
18 shared publications - Michel Brondani
Department of Chemical Engineering, Federal University of Santa Maria, Santa Maria, Brazil
12 shared publications Flávio Dias Mayer
5 shared publications- Liliana Amaral Féris
Federal University of Rio Grande do Sul, Department of Chemical Engineering, Ramiro Barcelos Street, 2777, Porto Alegre, RS, 90035-007, Brazil
4 shared publications - Nilson Romeu Marcilio
Universidade Federal do Rio Grande do Sul
4 shared publications - Paulo Roberto dos Santos Salbego
Núcleo de Química de Heterociclos (NUQUIMHE), Departamento de Engenharia e Tecnologia Ambiental (DETA), Federal University of Santa Maria (UFSM), 98400-000, Frederico Westphalen Campus, RS, Brazil
3 shared publications
Latest Publications
- Open Access
- 12 December 2022
- Published by Universidad Nacional de La Plata in AUGM DOMUS
- No. 10,p. 007
Actualización de los procesos de digestión anaeróbica de residuos orgánicos
La generación de residuos sólidos urbanos (RSU) ha ido en aumento. Los residuos orgánicos son los principales constituyentes de los RSU. Cuando se destina y se trata adecuadamente, puede aprovechar su potencial para generar energía. Actualmente una buena alternativa para la eliminación de este material es la digestión anaeróbica con fines energéticos. Sin embargo, existen otras formas de tratamiento como compostaje e incineración y disposición final como vertederos sanitarios. La digestión anaeróbica es un proceso fermentativo en el que se extrae materia orgánica transformado en biogás y biofertilizante. El biogás contiene metano que se puede utilizar como fuente de energía o biofertilizante utilizado como abono orgánico. Los otros métodos de tratamiento presentan algunas desventajas en relación con la digestión anaeróbica, como la pérdida de gas a la atmósfera, el alto costo de operación y la generación de cenizas. En la digestión anaeróbica hay varios factores que interfieren en el proceso como el pH, la alcalinidad, la temperatura, el sustrato, la TRH, la humedad, la relación C/N. Es muy importante controlar estos factores para el correcto funcionamiento del proceso de biodigestión. Esta revisión bibliográfica se centra sobre los últimos avances en digestión anaeróbica y los principales parámetros de control implicados. Se ha identificado una tendencia de trabajo en los estudios actuales que conducen a la producción de biogás. Se observó que conocer los factores más influyentes en el proceso de biodigestión y su comportamiento contribuye al buen funcionamiento del tratamiento biológico con producción de metano.
- 12 December 2022
- Published by Universidad Nacional de La Plata in AUGM DOMUS
- No. 10,p. 007
Open AccessActualización de los procesos de digestión anaeróbica de residuos orgánicos
La generación de residuos sólidos urbanos (RSU) ha ido en aumento. Los residuos orgánicos son los principales constituyentes de los RSU. Cuando se destina y se trata adecuadamente, puede aprovechar su potencial para generar energía. Actualmente una buena alternativa para la eliminación de este material es la digestión anaeróbica con fines energéticos. Sin embargo, existen otras formas de tratamiento como compostaje e incineración y disposición final como vertederos sanitarios. La digestión anaeróbica es un proceso fermentativo en el que se extrae materia orgánica transformado en biogás y biofertilizante. El biogás contiene metano que se puede utilizar como fuente de energía o biofertilizante utilizado como abono orgánico. Los otros métodos de tratamiento presentan algunas desventajas en relación con la digestión anaeróbica, como la pérdida de gas a la atmósfera, el alto costo de operación y la generación de cenizas. En la digestión anaeróbica hay varios factores que interfieren en el proceso como el pH, la alcalinidad, la temperatura, el sustrato, la TRH, la humedad, la relación C/N. Es muy importante controlar estos factores para el correcto funcionamiento del proceso de biodigestión. Esta revisión bibliográfica se centra sobre los últimos avances en digestión anaeróbica y los principales parámetros de control implicados. Se ha identificado una tendencia de trabajo en los estudios actuales que conducen a la producción de biogás. Se observó que conocer los factores más influyentes en el proceso de biodigestión y su comportamiento contribuye al buen funcionamiento del tratamiento biológico con producción de metano.
- 10 July 2020
- Published by Springer Nature in Clean Technologies and Environmental Policy
- Vol. 22 (7) , 1547-1563
Low-cost small-scale distillation column: assessment of polymeric materials on its economic, chemical, mechanical, and environmental performance
- 10 July 2020
- Published by Springer Nature in Clean Technologies and Environmental Policy
- Vol. 22 (7) , 1547-1563
Low-cost small-scale distillation column: assessment of polymeric materials on its economic, chemical, mechanical, and environmental performance
- 15 June 2020
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 59 (27) , 12545-12556
Experimental Fluid Dynamics Study of a New Fractal Dual-Flow Tray
- 15 June 2020
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 59 (27) , 12545-12556
Experimental Fluid Dynamics Study of a New Fractal Dual-Flow Tray
- 8 January 2020
- Published by Wiley in Chemical Engineering & Technology
- Vol. 43 (3) , 553-563
Experimental and Computational Fluid Dynamics Validation of Correlations for Dry Pressure Drop in Trays without Downcomer
- 8 January 2020
- Published by Wiley in Chemical Engineering & Technology
- Vol. 43 (3) , 553-563
Experimental and Computational Fluid Dynamics Validation of Correlations for Dry Pressure Drop in Trays without Downcomer
- Open Access
- 1 January 2020
- Published by University Nove de Julho in Revista de Gestão Ambiental e Sustentabilidade
- Vol. 9 (1) , e13443
Economic viability to generate electricity from the biogas produced in the wastewater treatment plant
Objective of the study: to present the analysis of the collected data referring to the characteristics of affluent sewage of the Serraria Sewage Treatment Station, in Porto Alegre/RS. Methodology / approach: descriptive research with a quantitative approach and centralized in the case study of the biogas exploration generated for the production of electric energy. Originality / relevance: this study focuses on the technical and economic feasibility for generating electricity from biogas effluent for use at the station itself, serving most of the local loads, as well as the energy conversion technology used from of the internal combustion Cycle Otto, with its accessories. Main results: installation, operation and maintenance costs for five years are estimated at around R$ 4.500.000,00. In addition, the return on invested capital occurs, at most, in 4 years and 7 months. Theoretical / methodological contributions: there is a tendency to increase electricity from the network tariff and the flow of inputs in the UASBs, making self-generation even more viable. Currently, biogas is flared and the sludge generated is deposited in landfills, which makes it possible to produce electricity and supply it to the distribution network. Conclusion: sewage treatment plants consisting of an upstream flow anaerobic sludge deposit followed by active sludge aims to treat effluents, that is, to promote the separation of gases, solids and liquids as a form of sustainable treatment and, in addition, to provide sustainable benefits and resources for society.
- 1 January 2020
- Published by University Nove de Julho in Revista de Gestão Ambiental e Sustentabilidade
- Vol. 9 (1) , e13443
Open AccessEconomic viability to generate electricity from the biogas produced in the wastewater treatment plant
Objective of the study: to present the analysis of the collected data referring to the characteristics of affluent sewage of the Serraria Sewage Treatment Station, in Porto Alegre/RS. Methodology / approach: descriptive research with a quantitative approach and centralized in the case study of the biogas exploration generated for the production of electric energy. Originality / relevance: this study focuses on the technical and economic feasibility for generating electricity from biogas effluent for use at the station itself, serving most of the local loads, as well as the energy conversion technology used from of the internal combustion Cycle Otto, with its accessories. Main results: installation, operation and maintenance costs for five years are estimated at around R$ 4.500.000,00. In addition, the return on invested capital occurs, at most, in 4 years and 7 months. Theoretical / methodological contributions: there is a tendency to increase electricity from the network tariff and the flow of inputs in the UASBs, making self-generation even more viable. Currently, biogas is flared and the sludge generated is deposited in landfills, which makes it possible to produce electricity and supply it to the distribution network. Conclusion: sewage treatment plants consisting of an upstream flow anaerobic sludge deposit followed by active sludge aims to treat effluents, that is, to promote the separation of gases, solids and liquids as a form of sustainable treatment and, in addition, to provide sustainable benefits and resources for society.
- 1 January 2020
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 37 (1) , 53-63
Food and Energy Production from Small-Scale Sugar Cane Industry as an Option for Sustainable Development: A Case Study in Southern Brazil
Rural areas in the southern region of Brazil are primarily occupied by smallholder farms where a variety of food crops are cultivated. Sugarcane is one of the most common food crop in this region because it is used in animal feed and as feedstock in production of brown sugar, schimier , sugarcane syrup, cachaça , and hydrous ethanol fuel (HEF). This study evaluated a small farm in a basalt hill region of Rio Grande do Sul state, Brazil. The raw material was processed in a family agro-industry with small-scale HEF production and food products from sugarcane. The study was based in an average cultivation area of 15 ha. In industrial stage, an economic assessment was developed according to operational diversity of industrial production (HEF and food products). Payback for production of brown sugar, sugarcane syrup, schimier , and cachaça , were 0.53, 0.36, 0.77 and 3.85, respectively, whereas HEF was not economically viable. This study demonstrated that small-scale sugarcane production can be economically and environmentally attractive. This is because the technologies necessary for agricultural cultivation and industrial processing are simplified, the process is capable of generating a range of marketable products, and the wastes (specially bagasse) can be reutilized in the agro-industrial process. The proposed model has potential to be utilized in regions with similar characteristics as those considered in this study.
- 1 January 2020
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 37 (1) , 53-63
Food and Energy Production from Small-Scale Sugar Cane Industry as an Option for Sustainable Development: A Case Study in Southern Brazil
Rural areas in the southern region of Brazil are primarily occupied by smallholder farms where a variety of food crops are cultivated. Sugarcane is one of the most common food crop in this region because it is used in animal feed and as feedstock in production of brown sugar, schimier , sugarcane syrup, cachaça , and hydrous ethanol fuel (HEF). This study evaluated a small farm in a basalt hill region of Rio Grande do Sul state, Brazil. The raw material was processed in a family agro-industry with small-scale HEF production and food products from sugarcane. The study was based in an average cultivation area of 15 ha. In industrial stage, an economic assessment was developed according to operational diversity of industrial production (HEF and food products). Payback for production of brown sugar, sugarcane syrup, schimier , and cachaça , were 0.53, 0.36, 0.77 and 3.85, respectively, whereas HEF was not economically viable. This study demonstrated that small-scale sugarcane production can be economically and environmentally attractive. This is because the technologies necessary for agricultural cultivation and industrial processing are simplified, the process is capable of generating a range of marketable products, and the wastes (specially bagasse) can be reutilized in the agro-industrial process. The proposed model has potential to be utilized in regions with similar characteristics as those considered in this study.
- Open Access
- 20 October 2019
- Published by Associacao Academica de Propriedade Intelectual in Revista Gestão Inovação e Tecnologias
- Vol. 9 (4) , 5219-5233
THIN LAYER CHROMATOGRAPHY AS INNOVATIVE TECHNIQUE FOR QUALITATIVE CHARACTERIZATION OF BIODIESEL PRODUCED BY ESTERIFICATION
The objective of this work was to evaluate the use of TLC, using the iodine vapor visualization method, for identification and preliminary characterization of biodiesel produced by esterification. The esterification reaction was performed at constant temperature of 65 °C for 2 hours, using dimethyl sulfate as alkylating agent and dodecanoic acid as oleaginous raw material. The chromatographic plate was subjected to the method of revelation after adding 5 µL of a sample of fatty acid and biodiesel on the chromatographic vessel. The indication of biodiesel formation was obtained by calculating the retention factor (Rf) and validated by hydrogen nuclear magnetic resonance (H1NMR). The Rf values and of the region of peaks of chemical functions were identical to those found in other studies, which allowed to confirm the formation of biodiesel. It can be concluded that TLC can be used as a innovative technique for preliminary qualitative characterization of biodiesel formation by esterification.
- 20 October 2019
- Published by Associacao Academica de Propriedade Intelectual in Revista Gestão Inovação e Tecnologias
- Vol. 9 (4) , 5219-5233
Open AccessTHIN LAYER CHROMATOGRAPHY AS INNOVATIVE TECHNIQUE FOR QUALITATIVE CHARACTERIZATION OF BIODIESEL PRODUCED BY ESTERIFICATION
The objective of this work was to evaluate the use of TLC, using the iodine vapor visualization method, for identification and preliminary characterization of biodiesel produced by esterification. The esterification reaction was performed at constant temperature of 65 °C for 2 hours, using dimethyl sulfate as alkylating agent and dodecanoic acid as oleaginous raw material. The chromatographic plate was subjected to the method of revelation after adding 5 µL of a sample of fatty acid and biodiesel on the chromatographic vessel. The indication of biodiesel formation was obtained by calculating the retention factor (Rf) and validated by hydrogen nuclear magnetic resonance (H1NMR). The Rf values and of the region of peaks of chemical functions were identical to those found in other studies, which allowed to confirm the formation of biodiesel. It can be concluded that TLC can be used as a innovative technique for preliminary qualitative characterization of biodiesel formation by esterification.
- 21 August 2019
- Published by Springer Nature in Environment, Development and Sustainability
- Vol. 22 (6) , 5925-5945
Life cycle assessment of distillation columns manufacturing
- 21 August 2019
- Published by Springer Nature in Environment, Development and Sustainability
- Vol. 22 (6) , 5925-5945
Life cycle assessment of distillation columns manufacturing
- 1 January 2019
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 36 (1) , 114-135
Life Cycle Assessment of Electrical Distribution Transformers: Comparative Study Between Aluminum and Copper Coils
Environmental impacts of electrical transformer manufacturing vary according to transformer power distribution capacity and metal type used in coil manufacture. 75 Kilovolt-ampere (kVA) transformers are widely used in light poles, residential buildings, and other locations, and copper and aluminum are the main metals used for coil manufacturing. Life cycle assessment (LCA) methodology was used to evaluate the environmental impact of copper and aluminum use in the 75 kVA transformer manufacturing process. Cradle-to-gate LCA was considered, and a distribution capacity of 75 kVA was adopted as functional unit. Results were obtained through SimaPro ® software and three environmental impact methods: Eco-indicator 99, CML 2, and ReCiPe. Coil type showed significant influence on environmental impacts due to the metal used in its production. Results of the comparison between coil types showed that the copper coil has more adverse effects on the environment. The main environmental impact attributed to aluminum coil is associated with its global warming potential due to a high energy requirement in aluminum production (75.7 MJ/kg) in comparison with copper (22.8 MJ/kg). Greenhouse gas emissions (in terms of carbon dioxide emissions, CO 2 ) from 75 kVA manufacturing with copper coil were, in average, 888.71 kg carbon dioxide equivalent (CO 2 eq) and 1,226.27 kg CO 2 eq with aluminum coil. Copper coils have a major contamination potential on terrestrial and marine environments. Some harmful effects on human health associated with copper mining and production are caused by the toxicity of heavy metals such as antimony, arsenic, cadmium, chromium, zinc, nickel, and mercury. Final results showed that copper has higher environmental impacts due to the production and emissions of heavy metals in its manufacturing process that cause more adverse effects on the environment in comparison with greenhouse gas emissions.
- 1 January 2019
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 36 (1) , 114-135
Life Cycle Assessment of Electrical Distribution Transformers: Comparative Study Between Aluminum and Copper Coils
Environmental impacts of electrical transformer manufacturing vary according to transformer power distribution capacity and metal type used in coil manufacture. 75 Kilovolt-ampere (kVA) transformers are widely used in light poles, residential buildings, and other locations, and copper and aluminum are the main metals used for coil manufacturing. Life cycle assessment (LCA) methodology was used to evaluate the environmental impact of copper and aluminum use in the 75 kVA transformer manufacturing process. Cradle-to-gate LCA was considered, and a distribution capacity of 75 kVA was adopted as functional unit. Results were obtained through SimaPro ® software and three environmental impact methods: Eco-indicator 99, CML 2, and ReCiPe. Coil type showed significant influence on environmental impacts due to the metal used in its production. Results of the comparison between coil types showed that the copper coil has more adverse effects on the environment. The main environmental impact attributed to aluminum coil is associated with its global warming potential due to a high energy requirement in aluminum production (75.7 MJ/kg) in comparison with copper (22.8 MJ/kg). Greenhouse gas emissions (in terms of carbon dioxide emissions, CO 2 ) from 75 kVA manufacturing with copper coil were, in average, 888.71 kg carbon dioxide equivalent (CO 2 eq) and 1,226.27 kg CO 2 eq with aluminum coil. Copper coils have a major contamination potential on terrestrial and marine environments. Some harmful effects on human health associated with copper mining and production are caused by the toxicity of heavy metals such as antimony, arsenic, cadmium, chromium, zinc, nickel, and mercury. Final results showed that copper has higher environmental impacts due to the production and emissions of heavy metals in its manufacturing process that cause more adverse effects on the environment in comparison with greenhouse gas emissions.