NPNicholaus Joseph Parziale

Nicholaus Joseph Parziale

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Nicholaus Joseph Parziale has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Shock structures and post-impact jetting in hypervelocity droplet impingement

    by M. Viqueira-Moreira, A. R. Dworzanczyk, J. D. Langhorn, M. A. Libeau, J. B. Middlebrooks, N. J. Parziale, C. Brehm

    The shock dynamics resulting from high-speed droplet impingement on a rigid surface are investigated employing high-resolution schlieren imaging and numerical simulations based on the five-equation model. A key finding is that, in contrast to the common emphasis on jetting-induced dynamics, the long-time shock morphology is governed not by explosive shocks generated during jetting, but rather by the reflection of the droplet’s own shock wave off the solid wall. The resulting shock structure is found to be robust across a wide range of densities and breakup states, and its evolution is shown to depend primarily on the impact Mach number. Axisymmetric and 3D simulations both capture the wall-reflected envelope with high fidelity, despite shared limitations in modeling post-impact jetting dynamics. The presented results clarify the physical mechanisms shaping post-impingement shock evolution and highlight the modeling trade-offs involved in capturing jet-driven transients. This paper provides a unique experimental and numerical dataset that can be used as a reference for future studies.

  • Open Access

    Hypersonic turbulent quantities in support of Morkovin’s hypothesis

    by B. A. Segall, T. C. Keenoy, J. C. Kokinakos, J. D. Langhorn, A. Hameed, D. Shekhtman, N. J. Parziale

    This paper presents boundary-layer profiles of streamwise mean and streamwise/wall-normal fluctuation data (\(\overline{u},{u}_{\,{{\rm{RMS}}}}^{{\prime} },{v}_{{{\rm{RMS}}}\,}^{{\prime} }\)) recorded with Krypton Tagging Velocimetry (KTV) at 100 kHz in a hypersonic, turbulent, zero-pressure-gradient boundary layer. The edge Mach number, wall-to-recovery temperature ratio, and friction Reynolds number are (M∞ = 6.4, Tw/Tr = 0.54, Reτ = 450), and (M∞ = 6.0, Tw/Tr = 0.17, Reτ = 780), for the ‘cold-flow’ and ‘enthalpy-matched’ conditions, respectively. The KTV data agrees with direct numerical simulation (DNS) within the error bounds of the experiment down to as low as 10% of the boundary-layer thickness (y/δ ≈ 0.1). The KTV and DNS data agree with incompressible laser-doppler anemometry (LDA) data after applying the Morkovin scaling, which accounts for mean density differences across the boundary layer. Therefore, the experimental data presented are supportive of Morkovin’s hypothesis, which is fundamental to our understanding of supersonic and hypersonic compressible turbulence. These are the first such wall-normal fluctuation measurements to support the hypothesis first proposed in 1962.


  • Open Access

    On aerobreakup in the stagnation region of high-Mach-number flow over a bluff body

    by A.R. Dworzanczyk, M. Viqueira-Moreira, J.D. Langhorn, M.A. Libeau, C. Brehm, N.J. Parziale

    In this paper, aerobreakup in the stagnation region of high-Mach-number flow over a bluff body is studied with experiments and computations. Water drops of diameter 0.51–2.30 mm were acoustically levitated at sea level along the flight path of a rectangular $100\ {\rm mm} \times 150\ {\rm mm}$ rail-gun launched projectile. This enabled the study of aerobreakup at high Mach (3.03–5.12), post-shock Mach (1.5–1.9), Weber $(5 \times 10^4\unicode{x2013}4 \times 10^5)$ and Reynolds $(6 \times 10^4\unicode{x2013}3 \times 10^5)$ numbers. High-speed backlit shadowgraphy is used to record the flow structure. Computations are made for two cases, and it was found that the drop behaviour is not dominated by viscous or surface-tension effects and can be adequately captured by treating the gas as calorically perfect with the ratio of specific heats set to 1.3 to account for thermochemical effects. To assess drop surface stability at early breakup times, results from Newton's inclination method are used to determine the flow along the drop surface and input to a linear-stability analysis; from this, it was found that viscosity and surface tension can be neglected. Moreover, the acceleration term dominates the shear term at the stagnation point, a point accentuated as a drop flattens; this relation inverts closer to the drop equator. Linear-stability analysis was insufficient for modelling late-stage aerobreakup because the predicted wavelengths were too small and the expected aerobreakup times were non-physically short. To address this discrepancy, a nonlinear instability model with constant-rate growth is used that treats the accelerated drop surface as analogous to bubbles rising through a liquid; agreement with computations is good.


  • Mach 18 flow velocimetry with 100-kHz KTV and PLEET in AEDC Tunnel 9

    by Naibo Jiang, Paul S. Hsu, Stephen W. Grib, Mikhail Slipchenko, David Shekhtman, Nicholaus Parziale, Mike S. Smith, Addison J. Spicer, Sukesh Roy

    Krypton Tagging Velocimetry (KTV) and Picosecond Laser Electronic Excitation Tagging (PLEET) velocimetry at a 100-kHz rate were demonstrated in Mach 18 flow conditions at the Arnold Engineering Development Center (AEDC) Tunnel 9 employing a burst-mode laser system and a custom optical parametric oscillator (OPO). The measured freestream flow velocities from both KTV and PLEET agreed well with the theoretical calculation. The increase in repetition rate provides better capability to perform time-resolved velocimetry measurements in hypersonic flow environments.


  • Freestream velocity-profile measurement in a large-scale, high-enthalpy reflected-shock tunnel

    by D. Shekhtman, W. M. Yu, M. A. Mustafa, N. J. Parziale, J. M. Austin

    We apply Krypton Tagging Velocimetry (KTV) to measure velocity profiles in the freestream of a large, national-scale high-enthalpy facility, the T5 Reflect


  • Two-photon cross-section calculations for krypton in the 190–220 nm range

    by David Shekhtman, Muhammad Ammar Mustafa, Nicholaus Joseph Parziale

    This paper presents multi-path, two-photon excitation cross-section calculations for krypton, using first-order perturbation theory. For evaluation of the two-photon-transition matrix element, this paper formulates the two-photon cross-section calculation as a matrix mechanics problem. From a finite basis of states, consisting of 4 p , 5 s , 6 s , 7 s , 5 p , 6 p , 4 d , 5 d , and 6 d orbitals, electric dipole matrix elements are constructed, and a Green’s function is expressed as a truncated, spectral expansion of solutions, satisfying the Schrödinger equation. Electric dipole matrix elements are evaluated via tabulated oscillator strengths, and where those are unavailable, quantum-defect theory is used. The relative magnitudes of two-photon cross-sections for eight krypton lines in the 190–220 nm range are compared to experimental excitation spectra with good agreement. This work provides fundamental physical understanding of the Kr atom, which adds to experimental observations of relative fluorescence intensity. This is valuable when comparing excitation schemes in different environments for krypton fluorescence experiments. We conclude that two-photon excitation at 212.556 nm is optimal for single-laser, krypton tagging velocimetry or krypton planar laser-induced fluorescence.


  • Single-Laser Krypton Tagging Velocimetry Investigation of Supersonic Air and N2 Boundary-Layer Flows over a Hollow Cylinder in a Shock Tube

    by Muhammad A. Mustafa, David Shekhtman, Nick J. Parziale

    In this paper, we investigate the boundary-layer profiles that form over a sharp, hollow cylinder in supersonic air and N2 flows with a krypton tagging velocimetry (KTV) single-laser scheme. The supersonic flows are generated by the passage of the primary shock wave over the model in the Stevens shock tube. The experiments are performed in two gas mixtures doped with Kr: 99% N2/1% Kr, to model N2, and 75% N2/20% O2/5% Kr, to model air. The experimental setup allows us to vary the pressure and Reynolds number from 3–25 kPa and 1.5×105 to 1.5×106m−1, respectively, while the Mach number is kept fixed at 1.7. The static temperature and pressure (but not the velocity) are representative of typical large-scale high-enthalpy hypersonic impulse facilities. The KTV data points over the hollow cylinder are mapped to corresponding wall-normal locations above a flat plate, which enables comparison with the similarity solution for compressible boundary-layer flow. Agreement between the similarity solution and experimental results is excellent. Relative to previous two-laser KTV schemes, the single-laser approach used in this work has the advantage of being simpler and more cost effective, but it has a higher laser-energy requirement, 10 mJ/pulse in these experiments. Single-laser KTV is implemented by increasing the energy of the write-laser pulse to a sufficient level such that the Kr becomes partially ionized via a (2+1) resonance-enhanced, multiphoton ionization (REMPI) process with an excitation wavelength of 212.6 nm. The write step records the fluorescence that results primarily from the spontaneous emission from the two-photon excitation. After a prescribed delay, the read step records the fluorescence that results from the transitions that follow the recombination process. The signal-to-noise ratio (SNR) is sufficient to extract velocity profiles from single-shot, shock-tube experiments. Two-photon absorption cross-section calculations and emission spectra are presented to justify the chosen excitation wavelength and support our understanding of the Kr excitation and emission scheme.


  • Amplification and structure of streamwise-velocity fluctuations in compression-corner shock-wave/turbulent boundary-layer interactions

    by M. A. Mustafa, N. J. Parziale, M. S. Smith, E. C. Marineau

    In this work, we study the effect of the compression-corner angle on the streamwise turbulent kinetic energy (sTKE) and structure in Mach 2.8 flow. Krypton tagging velocimetry (KTV) is used to investigate the incoming turbulent boundary layer and flow over $8^{\circ }$ , $16^{\circ }$ , $24^{\circ }$ and $32^{\circ }$ compression corners. The experiments were performed in a 99 % $\text{N}_{2}$ and 1 % Kr gas mixture in the Arnold Engineering Development Complex (AEDC) Mach 3 Calibration Tunnel (M3CT) at $Re_{\unicode[STIX]{x1D6E9}}=1750$ . A figure of merit is defined as the wall-normal integrated sTKE ( $\overline{\text{sTKE}}$ ), which is designed to identify turbulence amplification by accounting for the root-mean-squared (r.m.s.) velocity fluctuations and shear-layer width for the different geometries. We observe that the $\overline{\text{sTKE}}$ increases as an exponential with the compression-corner angle near the root when normalized by the boundary-layer value. Additionally, snapshot proper orthogonal decomposition (POD) is applied to the KTV results to investigate the structure of the flow. From the POD results, we extract the dominant flow structures and compare each case by presenting mean-velocity maps that correspond to the largest positive and negative POD mode coefficients. Finally, the POD spectrum reveals an inertial range common to the boundary-layer and each compression-corner flow that is present after the first ${\approx}10$ dominant POD modes.