IMIan Donald MacLeod

Ian Donald MacLeod

*This is an algorithmically generated author record based on publicly available information.

Ian Donald MacLeod has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    How climate change rewrites metal decay: forecasting ancient shipwreck corrosion under acidified seawater

    by Ludovica Pia Cesareo, Luigi Germinario, Floriana Salvemini, Ian Donald MacLeod, Edoardo Marchettoni, Corrado Ambrosi, Luigia Donnarumma, Adelmo Sorci, Claudio Mazzoli

    Underwater cultural heritage sites are under increasing pressure from emerging environmental risks: warmer waters and changing seawater chemistry are accelerating corrosion processes in ways that remain difficult to quantify in terms of their impacts on protected archaeological metals. This work proposes an experimental approach that makes these changes measurable and comparable across sites using metallic coupons carefully selected to match materials revealed from a series of wrecks. Coupons were deployed at different depths at four different locations, and retrieved at fixed time intervals. The development of corrosion layers, concretions, and biofouling in the natural environment was investigated. Observations were integrated with results from a second experimental approach. The same set of coupons was exposed to controlled environmental conditions using a custom Micro-Environment Simulator (MES). MES was set to reproduce marine conditions at 4 bar gauge pressure (40 m depth), 20 °C water temperature, and pH 7.7, simulating ocean acidification by the end of this century according to the CMIP6 projections for the Mediterranean under the SSP5-8.5 Warming 4 °C scenario. Results have shown a significant shift in electrochemical equilibria under declining pH, significantly influencing the stability of the corrosion products, and determining a shift in the behaviour of the corrosion layers from protective barrier to pathway for continued metal loss. By linking corrosion behaviour to specific environmental settings, the approach provides indicators of when and where deterioration is likely to accelerate under future scenarios. These outputs support preventive strategies for underwater metallic heritage by identifying high-risk wreck contexts, and guiding actions before irreversible loss occurs.Acknowledgement:This research has been funded by European Union’s Horizon Europe research and innovation programme under THETIDA project (Grant Agreement No. 101095253) (Technologies and methods for improved resilience and sustainable preservation of underwater and coastal cultural heritage to cope with climate change, natural hazards and environmental pollution).

  • Open Access

    Impact of Microbiological Activity and Moisture on the Surface pH of Rock Art Sites: Cueva del Ratón, Baja California Sur, Mexico and Other Sites

    by Ian Donald MacLeod, Valerie Magar

    This paper reviews the apparent impact of how changes in nitrate, sulphate activities, and moisture affect the surface pH of rock art paintings at Cueva del Ratón, in the Sierra de San Francisco in Baja California Sur, Mexico. The data was collected after atypical weather events caused rain and mist in this normally arid area. The rock art paintings had been previously examined over several years and observed the unexpected formation of silica skins over some surfaces; such coatings are not often experienced in arid environments. The local geology of the cave and the availability of moisture can dramatically alter the microbiological activity on faecal material and development of surface acidity from such reactions which interacts with both the host rock and the pigments. Through a series of surface pH measurements and localised measurements on chloride, sulphate and nitrate it appears that both nitrate and sulphate concentrations have a significant impact on the surface pH, which is controlled by a diffusion-based movement of moisture from the closed to the open end of the shelter. The exfoliation of the rock surface and formation of the silica skins involves chemical reactions as contrasted with diffusion-controlled reactions which distribute the metabolites of the yeasts, moulds and bacteria, which are dominated by the availability of water through drip lines. The results are particularly relevant due to changing weather patterns in the last decade, caused by climate change, with an increase in hurricanes directly affecting the Baja California peninsula. The use of disposable test strips for semi-quantitative assessment of how these major anions impact on the decay mechanisms was a novel response to budget constraints and the remoteness of the location.

  • Integration of Laboratory and Field Measurements on Soil and Bronze Artifacts: Facilitating Conservation Treatment and Management of Archaeological Collections

    by Ian Donald MacLeod, Alice Boccia Paterakis

    Chloride ion, pH, and voltage (redox potential) measurements were conducted in the field and conservation laboratory on soil and copper alloy artifacts deriving from two archaeological sites of the Japanese Institute of Anatolian Archaeology, Kaman-Kalehöyük (Kırşehir) and Büklükale (Kirikkale), in Central Anatolia, Turkey. The project established the impact of the burial environmental conditions on the state of the recovered metal artifacts and applied this information to the subsequent conservation management of the metal artifacts in the collection. These measurements may be used to determine the degree of stability of the metal artifacts for their long-term preservation. Based on the test results a conservation plan may be drafted according to three options: (1) active conservation intervention (e.g., treating with a chemical corrosion inhibitor or desalination); (2) preventive conservation through control of the environment; and (3) no protective measures necessary. Recommendations for conservators include simple tests on soil and representative artifacts as a guide to predict decay behavior for post-excavation collection management. These test protocols may be applied to the interpretation of material degradation at all archaeological sites and may be adapted for other porous materials. A decision-making model is provided in a flow chart.


  • Analysis of poultice-based desalination of a nineteenth century brick and stone cathedral after the event; a longitudinal study of surface chloride readings

    by Ian D. Macleod

    St George’s Cathedral in Perth was consecrated in 1888 and constructed using hand-made bricks and limestone. After 120 years of exposure to salt-laden winds, rising salty water and leaky roofs significant deterioration due to salt efflorescence and water penetration necessitated an $18 million AUD restoration program in 2002. Before accepting the heritage architect’s proposal to replace all the worst damaged brick and stone elements, surface chloride activity mapping of the affected areas was conducted. The survey found that the worst decay was associated with high chloride ion concentrations, with a maximum value of 10,000 ppm on a brick buttress and 7,600 ppm on a stone colonnade on the west front. After four months of treatment, the Westox Cocoon papier-mâché pulp poultice had lowered the surface chloride readings to 10 ± 5 ppm on the bricks and stone. Ten years after the work, a series of tests were conducted on salt-damaged reference stone and bricks to find formulae for converting surface chloride readings into weight percent extractable chloride concentrations. This data was then retrospectively applied to the treated cathedral fabric to estimate how much chloride had been removed. Without the poultice treatment, large sections of the original fabric would have been lost.


  • An Electrochemical Simulation and Treatment Study for the Carbonate and Chloride Based Corrosion of Heritage Silver–Copper Alloys

    by Ahmad N. Abu-Baker, Ian D. MacLeod

    This study aimed to investigate the corrosion of a group of historic silver–copper alloy coins and their conservation treatment on defined parameters by potentiostatic methods. Basic copper carbonates and silver chloride were identified on the surface of the coins by a combination of scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) and X-ray diffraction (XRD) analyses. The carbonate and chloride-based corrosion mechanisms were synthetically simulated on modern silver–copper alloy samples (Ag72/Cu28) by anodic polarisation measured by linear sweep voltammetry (LSV) in sodium bicarbonate (NaHCO3) and sodium chloride (NaCl) solutions. Cathodic polarisation curves, measured by LSV, were used to identify the working conditions to reduce the corrosion products on the corroded samples and to treat the actual coins. The reduction process was then monitored by chronoamperometry. Following the potentiostatic reduction process, the metallic copper spots on the treated samples were wiped with cotton swabs moistened with a diluted solution of silver nitrate (AgNO3) to obtain a silvery appearance, and the treatment was completed by a gentle rubbing of the redeposited silver with a cotton swab moistened with a calcium carbonate (CaCO3) suspension followed by rinsing and drying. The corrosion products identified on the synthetically corroded samples indicated that the deterioration mechanisms were dominated by selective attack on the copper-rich phases of the (Ag72/Cu28) alloy, which is consistent with an internal galvanic corrosion phenomenon. The potentiostatic methods showed excellent effectiveness in determining treatment parameters and monitoring the reduction process of the corrosion products on the coins, which helped to preserve surface details in the cleaning process and to prevent over-treatment.