Joana P. Mendes
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Joana P. Mendes has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Arménio Coimbra Serra
Department of Chemical Engineering, Faculty of Sciences and Technology, University of Coimbra, 3030-790 Coimbra, Portugal
8 shared publications - Jorge Fernando Jordao Coelho
CEMMPRE, ARISE, Department of Chemical Engineering, University of Coimbra, Rua Sílvio Lima-Pólo II, 3030-790 Coimbra, Portugal
8 shared publications - Nuno Rocha
Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
4 shared publications - Patrícia Vitorino Mendonça
University of Coimbra, Centre for Mechanical Engineering, Materials and Processes, Department of Chemical Engineering, Rua Sílvio Lima-Polo II, 3030-790 Coimbra, Portugal
4 shared publications - Carlos M. R. Abreu
University of Coimbra Rua Sílvio Lima − Polo II
3 shared publications - Anatoliy V. Popov
Department of Radiology, University of Pennsylvania Perelman School of Medicine, Philadelphia, PA 19104, USA
2 shared publications
Latest Publications
- 26 January 2017
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 55 (8) , 1322-1328
Ambient temperature SARAATRP for meth(acrylates), styrene, and vinyl chloride using sulfolane/1-butyl-3-methylimidazolium hexafluorophosphate-based mixtures
- 26 January 2017
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 55 (8) , 1322-1328
Ambient temperature SARAATRP for meth(acrylates), styrene, and vinyl chloride using sulfolane/1-butyl-3-methylimidazolium hexafluorophosphate-based mixtures
- 4 July 2015
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 53 (23) , 2722-2729
Cyclopentyl methyl ether: A new green co‐solvent for supplemental activator and reducing agent atom transfer radical polymerization
A new green solvent, cyclopentyl methyl ether (CPME), is used for the first time in solvent mixtures for the successful supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of both activated and non‐activated monomers. The SARA ATRP of methyl acrylate (MA), glycidyl methacrylate (GMA), styrene (Sty), and vinyl chloride (VC) in CPME‐based mixtures is studied and presents similar features to those reported in the literature using other SARA ATRP systems. Moreover, CPME‐based mixtures are suitable solvents for the controlled SARA ATRP of MA using different SARA agents, such as Fe(0), Cu(0), or Na2S2O4. The chemical structure and the retention of the chain‐end functionality of the polymers are confirmed by 1H NMR and MALDI‐TOF analyses and the preparation of a well‐defined PMA‐b‐PVC‐b‐PMA triblock copolymer. The method reported here presents an additional improvement in the search for new ecofriendly ATRP systems. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015, 53, 2722–2729
- 4 July 2015
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 53 (23) , 2722-2729
Cyclopentyl methyl ether: A new green co‐solvent for supplemental activator and reducing agent atom transfer radical polymerization
A new green solvent, cyclopentyl methyl ether (CPME), is used for the first time in solvent mixtures for the successful supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of both activated and non‐activated monomers. The SARA ATRP of methyl acrylate (MA), glycidyl methacrylate (GMA), styrene (Sty), and vinyl chloride (VC) in CPME‐based mixtures is studied and presents similar features to those reported in the literature using other SARA ATRP systems. Moreover, CPME‐based mixtures are suitable solvents for the controlled SARA ATRP of MA using different SARA agents, such as Fe(0), Cu(0), or Na2S2O4. The chemical structure and the retention of the chain‐end functionality of the polymers are confirmed by 1H NMR and MALDI‐TOF analyses and the preparation of a well‐defined PMA‐b‐PVC‐b‐PMA triblock copolymer. The method reported here presents an additional improvement in the search for new ecofriendly ATRP systems. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015, 53, 2722–2729
- 18 August 2014
- Published by American Chemical Society (ACS) in ACS Macro Letters
- Vol. 3 (9) , 858-861
Sulfolane: an Efficient and Universal Solvent for Copper-Mediated Atom Transfer Radical (co)Polymerization of Acrylates, Methacrylates, Styrene, and Vinyl Chloride
A very fast and controlled atom transfer radical (co)polymerization (ATRP) of acrylates, methacrylates, styrene, and vinyl chloride is reported in a single dipolar aprotic solvent, sulfolane, with the use of ppm amount of the copper catalyst. The observed rates of polymerization (kpapp) of the monomers studied are similar to those reported using dimethyl sulfoxide (DMSO) and other polar solvents typically employed in single electron transfer (SET)-mediated atom transfer radical polymerization (ATRP) processes. As proof-of-concept, ABA type block copolymers of polystyrene-b-poly(vinyl chloride)-b-polystyrene and poly(methyl acrylate)-b-poly(vinyl chloride)-b-poly(methyl acrylate) were prepared for the first time using a reversible deactivation radical polymerization (RDRP) method in a single solvent. The quantitative preservation of halide chain-ends was confirmed by 1H NMR and MALDI-TOF analysis as well as by the complete shift of the GPC traces. The results presented establish an innovative and robust system to afford a vast portfolio of (co)polymers in a single widely used industrial solvent.
- 18 August 2014
- Published by American Chemical Society (ACS) in ACS Macro Letters
- Vol. 3 (9) , 858-861
Sulfolane: an Efficient and Universal Solvent for Copper-Mediated Atom Transfer Radical (co)Polymerization of Acrylates, Methacrylates, Styrene, and Vinyl Chloride
A very fast and controlled atom transfer radical (co)polymerization (ATRP) of acrylates, methacrylates, styrene, and vinyl chloride is reported in a single dipolar aprotic solvent, sulfolane, with the use of ppm amount of the copper catalyst. The observed rates of polymerization (kpapp) of the monomers studied are similar to those reported using dimethyl sulfoxide (DMSO) and other polar solvents typically employed in single electron transfer (SET)-mediated atom transfer radical polymerization (ATRP) processes. As proof-of-concept, ABA type block copolymers of polystyrene-b-poly(vinyl chloride)-b-polystyrene and poly(methyl acrylate)-b-poly(vinyl chloride)-b-poly(methyl acrylate) were prepared for the first time using a reversible deactivation radical polymerization (RDRP) method in a single solvent. The quantitative preservation of halide chain-ends was confirmed by 1H NMR and MALDI-TOF analysis as well as by the complete shift of the GPC traces. The results presented establish an innovative and robust system to afford a vast portfolio of (co)polymers in a single widely used industrial solvent.
- 16 July 2014
- Published by Elsevier in Progress in Organic Coatings
- Vol. 77 (11) , 1741-1749
Stabilization of nano-TiO2 aqueous dispersions with poly(ethylene glycol)-b-poly(4-vinyl pyridine) block copolymer and their incorporation in photocatalytic acrylic varnishes
- 16 July 2014
- Published by Elsevier in Progress in Organic Coatings
- Vol. 77 (11) , 1741-1749
Stabilization of nano-TiO2 aqueous dispersions with poly(ethylene glycol)-b-poly(4-vinyl pyridine) block copolymer and their incorporation in photocatalytic acrylic varnishes
- Open Access
- 27 May 2014
- Published by American Chemical Society (ACS) in ACS Macro Letters
- Vol. 3 (6) , 544-547
Synergistic Effect of 1-Butyl-3-methylimidazolium Hexafluorophosphate and DMSO in the SARA ATRP at Room Temperature Affording Very Fast Reactions and Polymers with Very Low Dispersity
An unusual synergistic effect between 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6) and dimethyl sulfoxide (DMSO) mixtures is reported for the supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of methyl acrylate (MA) using a catalytic system composed by sodium dithionate (Na2S2O4) and CuBr2/Me6TREN (Me6TREN: tris[2-(dimethylamino)ethyl]amine) at room temperature. To the best of our knowledge, the use of ionic liquids (IL) has never been reported for the SARA ATRP. The kinetic data obtained for a broad range of target molecular weights revealed very fast polymerization rates, low dispersity values (Đ < 1.05) and well-defined chain-end functionalities.
- 27 May 2014
- Published by American Chemical Society (ACS) in ACS Macro Letters
- Vol. 3 (6) , 544-547
Open AccessSynergistic Effect of 1-Butyl-3-methylimidazolium Hexafluorophosphate and DMSO in the SARA ATRP at Room Temperature Affording Very Fast Reactions and Polymers with Very Low Dispersity
An unusual synergistic effect between 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF6) and dimethyl sulfoxide (DMSO) mixtures is reported for the supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) of methyl acrylate (MA) using a catalytic system composed by sodium dithionate (Na2S2O4) and CuBr2/Me6TREN (Me6TREN: tris[2-(dimethylamino)ethyl]amine) at room temperature. To the best of our knowledge, the use of ionic liquids (IL) has never been reported for the SARA ATRP. The kinetic data obtained for a broad range of target molecular weights revealed very fast polymerization rates, low dispersity values (Đ < 1.05) and well-defined chain-end functionalities.
- 6 January 2014
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 2 (11) , 1565-1575
Poly(ethylene glycol)-block-poly(4-vinyl pyridine) as a versatile block copolymer to prepare nanoaggregates of superparamagnetic iron oxide nanoparticles
This work reports an efficient method for the preparation of aqueous dispersions of superparamagnetic iron oxide nanoparticles (SPIONs), involving the use of an amphiphilic block copolymer, poly(ethylene glycol)-block-poly(4-vinyl pyridine) (mPEG-b-P4VP). The iron oxide nanoparticles are easily and efficiently dispersed due to the strong direct interaction of the hydrophobic P4VP segments, through complexation with pyridine units of the copolymer. Well-defined block copolymers, having different compositions and molecular weights, were prepared by atom transfer radical polymerization (ATRP). The aqueous self-assembly behavior of each system has been compared based on the method of preparation. The results revealed that the addition of ionic species has a significant effect on the size and type of formed nanostructures, the magnitude of which is dependent on the block copolymers' molecular design. When similar self-assembly strategies were used in the presence of SPIONs, the same type of nanostructures was formed. The hybrid SPION nanoaggregates were investigated using NMR relaxometric techniques, whereby high r2/r1 relaxivity ratios were achieved, making these materials potentially efficient T2-weighted MRI contrast agents.
- 6 January 2014
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 2 (11) , 1565-1575
Poly(ethylene glycol)-block-poly(4-vinyl pyridine) as a versatile block copolymer to prepare nanoaggregates of superparamagnetic iron oxide nanoparticles
This work reports an efficient method for the preparation of aqueous dispersions of superparamagnetic iron oxide nanoparticles (SPIONs), involving the use of an amphiphilic block copolymer, poly(ethylene glycol)-block-poly(4-vinyl pyridine) (mPEG-b-P4VP). The iron oxide nanoparticles are easily and efficiently dispersed due to the strong direct interaction of the hydrophobic P4VP segments, through complexation with pyridine units of the copolymer. Well-defined block copolymers, having different compositions and molecular weights, were prepared by atom transfer radical polymerization (ATRP). The aqueous self-assembly behavior of each system has been compared based on the method of preparation. The results revealed that the addition of ionic species has a significant effect on the size and type of formed nanostructures, the magnitude of which is dependent on the block copolymers' molecular design. When similar self-assembly strategies were used in the presence of SPIONs, the same type of nanostructures was formed. The hybrid SPION nanoaggregates were investigated using NMR relaxometric techniques, whereby high r2/r1 relaxivity ratios were achieved, making these materials potentially efficient T2-weighted MRI contrast agents.
- 4 March 2013
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 4 (10) , 3088-3097
Synthesis of well-defined poly(2-(dimethylamino)ethyl methacrylate) under mild conditions and its co-polymers with cholesterol and PEG using Fe(0)/Cu(ii) based SARA ATRP
Atom transfer radical polymerization (ATRP) of 2-(dimethylamino)ethyl methacrylate (DMAEMA) with a mixed transition metal catalytic system consisting of Fe(0) and small amounts of CuBr2/PMDETA (N,N,N′,N′′,N′′-pentamethyldiethylenetriamine) in water–isopropanol mixtures at 60 °C and 25 °C is reported and compared with commonly used CuBr/PMDETA-mediated ATRP systems. The obtained kinetics of polymerization showed that, in addition to the environmental attractiveness of this catalytic system, Fe/Cu mixed transition metal mediated ATRP of a DMAEMA monomer provides a significantly improved control of polymer chain growth, forming PDMAEMA of low dispersity values at all conversions. The controlled character of ATRP of DMAEMA was confirmed by the linear increase of molecular weights with monomer conversion, narrow molecular weight distributions, and re-initiation/chain extension experiments. The molecular structure of the obtained polymer(s) was confirmed by 1H nuclear magnetic resonance spectroscopy and matrix-assisted laser desorption ionization time-of-flight mass spectroscopy. ATRP of DMAEMA was also extended to synthesis of functional bio-relevant polymers with cholesterol and poly(ethylene glycol) segments.
- 4 March 2013
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 4 (10) , 3088-3097
Synthesis of well-defined poly(2-(dimethylamino)ethyl methacrylate) under mild conditions and its co-polymers with cholesterol and PEG using Fe(0)/Cu(ii) based SARA ATRP
Atom transfer radical polymerization (ATRP) of 2-(dimethylamino)ethyl methacrylate (DMAEMA) with a mixed transition metal catalytic system consisting of Fe(0) and small amounts of CuBr2/PMDETA (N,N,N′,N′′,N′′-pentamethyldiethylenetriamine) in water–isopropanol mixtures at 60 °C and 25 °C is reported and compared with commonly used CuBr/PMDETA-mediated ATRP systems. The obtained kinetics of polymerization showed that, in addition to the environmental attractiveness of this catalytic system, Fe/Cu mixed transition metal mediated ATRP of a DMAEMA monomer provides a significantly improved control of polymer chain growth, forming PDMAEMA of low dispersity values at all conversions. The controlled character of ATRP of DMAEMA was confirmed by the linear increase of molecular weights with monomer conversion, narrow molecular weight distributions, and re-initiation/chain extension experiments. The molecular structure of the obtained polymer(s) was confirmed by 1H nuclear magnetic resonance spectroscopy and matrix-assisted laser desorption ionization time-of-flight mass spectroscopy. ATRP of DMAEMA was also extended to synthesis of functional bio-relevant polymers with cholesterol and poly(ethylene glycol) segments.
- 22 November 2012
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 214 (1) , 76-84
Facile Synthesis of Well‐Defined Telechelic Alkyne‐Terminated Polystyrene in Polar Media Using ATRP With Mixed Fe/Cu Transition Metal Catalyst
- 22 November 2012
- Published by Wiley in Macromolecular Chemistry and Physics
- Vol. 214 (1) , 76-84
Facile Synthesis of Well‐Defined Telechelic Alkyne‐Terminated Polystyrene in Polar Media Using ATRP With Mixed Fe/Cu Transition Metal Catalyst