Jonathan A. Brant
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jonathan A. Brant has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Satish Muthu
Mississippi State University, Starkville, MS
2 shared publications Tao Wu
2 shared publicationsAdam E Marsh
1 shared publication- Amy E. Childress
Sonny Astani Department of Civil and Environmental Engineering, University of Southern California, 3620 S. Vermont Avenue, Los Angeles, California 90089, United States
1 shared publication - David A. Ladner
Department of Environmental Engineering and Earth Sciences, Clemson University, Anderson, South Carolina, USA
1 shared publication Dongmei Katie Li
1 shared publication
Latest Publications
- Open Access
Nanotube Alignment and Surface Chemistry in Altering Water and Salt Permeabilities for Imogolite-Polyamide Membranes
Reducing the specific energy consumption of reverse osmosis (RO) processes motivates the development of new membrane materials that have enhanced water permeability while maintaining low salt permeability (high rejection). Nanocomposite membranes have shown great promise in achieving these goals, particularly those using nanotubes as fillers. Here, we report on the relationships between the orientations and surface functionalities of imogolite nanotubes (INTs) with water and salt permeabilities for polyamide nanocomposite membranes. An external electric field was used to manipulate the INT orientation within the polyamide active layer. The INT interior and exterior chemistries, respectively, were made hydrophobic using methyl triethoxysilane as a precursor during INT synthesis and post-synthesis modification with alkali-phosphate groups. Irrespective of nanotube orientation or surface chemistry, membrane permeance increased from 0.3 to ≥1.0 L m−2 h−1 bar−1. A salt permeability comparable to the conventional polyamide membrane was maintained by making the INT pore throat hydrophobic. These findings indicated that salt rejection could be tailored by manipulating the INT interior surface chemistry without sacrificing water permeability.
Open AccessNanotube Alignment and Surface Chemistry in Altering Water and Salt Permeabilities for Imogolite-Polyamide Membranes
Reducing the specific energy consumption of reverse osmosis (RO) processes motivates the development of new membrane materials that have enhanced water permeability while maintaining low salt permeability (high rejection). Nanocomposite membranes have shown great promise in achieving these goals, particularly those using nanotubes as fillers. Here, we report on the relationships between the orientations and surface functionalities of imogolite nanotubes (INTs) with water and salt permeabilities for polyamide nanocomposite membranes. An external electric field was used to manipulate the INT orientation within the polyamide active layer. The INT interior and exterior chemistries, respectively, were made hydrophobic using methyl triethoxysilane as a precursor during INT synthesis and post-synthesis modification with alkali-phosphate groups. Irrespective of nanotube orientation or surface chemistry, membrane permeance increased from 0.3 to ≥1.0 L m−2 h−1 bar−1. A salt permeability comparable to the conventional polyamide membrane was maintained by making the INT pore throat hydrophobic. These findings indicated that salt rejection could be tailored by manipulating the INT interior surface chemistry without sacrificing water permeability.
- 6 December 2022
- Published by Elsevier in Journal of Membrane Science
- Vol. 668
Ion dehydration using magnetic fields and impacts on permeability across RO membranes
- 6 December 2022
- Published by Elsevier in Journal of Membrane Science
- Vol. 668
Ion dehydration using magnetic fields and impacts on permeability across RO membranes
- Open Access
Mass Transport in Membrane Systems: Flow Regime Identification by Fourier Analysis
The numerical calculation of local mass distributions in membrane systems by computational fluid dynamics (CFD) offers indispensable benefits. However, the concept to calculate such distributions in response to separate variations of operation conditions (OCs) makes it difficult to address overall, flow-physics-related questions, which require the consideration of the collective interaction of OCs. It is shown that such understanding-related relationships can be obtained by the analytical solution of the advection–diffusion equation considered. A Fourier series model (FSM) is presented, which provides exact solutions of an advection–diffusion equation for a wide range of OCs. On this basis, a new zeroth-order model is developed, which is very simple and as accurate as the complete FSM for all conditions of practical relevance. Advection-dominated blocked and diffusion-dominated unblocked flow regimes are identified (depending on a Péclet number which compares the flow geometry with a length scale imposed by the flow), which implies relevant requirements for the use of lab results for pilot- and full-scale applications. Analyses reveal the equivalence of variations of OCs, which offers a variety of options to accomplish desired flow regime changes.
Open AccessMass Transport in Membrane Systems: Flow Regime Identification by Fourier Analysis
The numerical calculation of local mass distributions in membrane systems by computational fluid dynamics (CFD) offers indispensable benefits. However, the concept to calculate such distributions in response to separate variations of operation conditions (OCs) makes it difficult to address overall, flow-physics-related questions, which require the consideration of the collective interaction of OCs. It is shown that such understanding-related relationships can be obtained by the analytical solution of the advection–diffusion equation considered. A Fourier series model (FSM) is presented, which provides exact solutions of an advection–diffusion equation for a wide range of OCs. On this basis, a new zeroth-order model is developed, which is very simple and as accurate as the complete FSM for all conditions of practical relevance. Advection-dominated blocked and diffusion-dominated unblocked flow regimes are identified (depending on a Péclet number which compares the flow geometry with a length scale imposed by the flow), which implies relevant requirements for the use of lab results for pilot- and full-scale applications. Analyses reveal the equivalence of variations of OCs, which offers a variety of options to accomplish desired flow regime changes.
- 1 October 2022
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 39 (10) , 861-862
AEESP Spotlight: Late 2022
Environmental Engineering Science
- 1 October 2022
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 39 (10) , 861-862
AEESP Spotlight: Late 2022
Environmental Engineering Science
- 30 June 2022
- Published by Office of Scientific and Technical Information (OSTI)
Resource Recovery and Environmental Protection in Wyoming’s Greater Green River Basin Using Selective Nanostructured Membranes (Final Report)
Produced water (PW) represents a sizable waste stream that is co-generated with oil and natural gas production. In 2021 Wyoming ranked 8th and 9th, respectively in domestic oil and natural gas production. In 2017 Wyoming ranked as the 4th highest generator of PW in the U.S, accounting for 7% of the total volume generated. In the context of being the 3rd most arid state in the U.S., the value of water reuse becomes obvious. PW reuse, and resource recovery, in any form requires some level of treatment to remove particulates, residual (free, dispersed) hydrocarbons, organics, and salts. The level of treatment depends on the requirements of the reuse, or resource recovery, application. PW management systems in Wyoming employ in order of volume of PW managed the following management strategies: reinjection for enhanced oil recovery, surface discharge, deep well injection, evaporation ponds (impoundments), and commercial management/treatment. Complicating treatment efforts are the relatively high concentrations of organics (natural and synthetic), dispersed/free hydrocarbons, benzene-toluene-ethylbenzene, and xylenes (BTEX) compounds, biologicals, salts, and minerals. Hydrocarbons (dispersed/dissolved crude oils) and BTEX compounds, as well as synthetic organics, present economic and environmental concerns. The former represents lost revenue, while the latter results in negative environmental impacts like emissions from surface impoundments. The overall objective of this proposal was to synthesize superhydrophilic/oleophobic and superhydrophobic/oleophilic membranes for selectively concentrating and then separating BTEX compounds and oil and grease (O&G) from PW originating from the Greater Green River Basin (GGRB) in Wyoming. Three specific research aims were pursued to accomplish this overall objective. This final report details the development of the superhydrophobic and superhydrophilic membranes, as well as the design of the membrane module prototypes specifically. The technoeconomic assessment is separately reported in another document. 1. Aim #1 – Material optimization and performance evaluation of superhydrophilic/oleophobic and superhydrophobic/oleophilic membranes made by electrospinning/spraying. 2. Aim #2 – Design and construction of cross-flow membrane modules for selectively concentrating and then separating BTEX/oil from GGRB produced water. 3. Aim #3 – Techno-economic assessment of BTEX/oil recovery, and clean water production, using superhydrophilic/oleophobic and superhydrophobic/oleophilic membrane separation for GGRB PW. Superhydrophobic membranes were synthesized by electrospinning poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) nanofibers onto polyester (PET) substrates and electrospraying nano-carbon black/PVDF-HFP onto the nanofibrous layer. These membranes were characterized by high (>8000 liters per square meter per hour per bar (LMH/bar)) permeance values for pure hydrocarbon phases and a high hydrocarbon selectivity (>96%) when treating GGRB PW. All results were obtained when operating the membrane in a crossflow configuration representative of actual field operating conditions. Solvent/oil properties, specifically viscosity and total surface energy/tension, affected permeance across the membrane, which resulted in light mineral oil (394 LMH/bar) and o-xylene (1834 LMH/bar) being characterized by lower permeance values in the pure phase tests. Mixed phase fluxes between 40 to 80 LMH were obtained for the PW when operating the membrane at a feed pressure of 0.3 bar. Flux decreased as the mixed phase concentration in the feed decreased pointing to the importance of maximizing the collision efficiency between the emulsion and the membrane surface and maximizing the emulsion concentration in the feed and the turbulence within the feed channel. These tests demonstrated that the superhydrophobic membranes developed here are a viable hydrocarbon recovery method for GGRB PWs and should be pursued for testing in pilot-scale trials. Superhydrophilic membranes were successfully synthesized via electrospinning/spraying using polyacrylonitrile (PAN) nanofibers as a base nanofibrous matrix. Integration of polyaniline (PANI) into the nanofibrous matrix produced a superior membrane, for water filtration applications, relative to PAN alone and reduced graphene oxide (RGO) when integrated into the nanofibrous matrix. This conclusion was based on the PANI-PAN resistance to flux loss (fouling) when treating model solvent/oil solutions representative of GGRB PWs and field collected PW from the GGRB. The synthesized PAN membranes outperformed a commercially available PAN membrane designed for oil/water separation. This finding indicates that the surface chemical and physical characteristics of the electrospun membranes presents improved properties for filtration of challenging waters like GGRB PWs. The electrospun membranes therefore show promise overall as a substitute for conventionally polymerized membranes in PW treatment applications. The PANI-PAN membrane specifically presents superior performance characteristics for concentration O&G prior to treatment by the hydrocarbon recovery membrane and producing high-quality filtrate for reuse and/or additional treatment (desalination).
- 30 June 2022
- Published by Office of Scientific and Technical Information (OSTI)
Resource Recovery and Environmental Protection in Wyoming’s Greater Green River Basin Using Selective Nanostructured Membranes (Final Report)
Produced water (PW) represents a sizable waste stream that is co-generated with oil and natural gas production. In 2021 Wyoming ranked 8th and 9th, respectively in domestic oil and natural gas production. In 2017 Wyoming ranked as the 4th highest generator of PW in the U.S, accounting for 7% of the total volume generated. In the context of being the 3rd most arid state in the U.S., the value of water reuse becomes obvious. PW reuse, and resource recovery, in any form requires some level of treatment to remove particulates, residual (free, dispersed) hydrocarbons, organics, and salts. The level of treatment depends on the requirements of the reuse, or resource recovery, application. PW management systems in Wyoming employ in order of volume of PW managed the following management strategies: reinjection for enhanced oil recovery, surface discharge, deep well injection, evaporation ponds (impoundments), and commercial management/treatment. Complicating treatment efforts are the relatively high concentrations of organics (natural and synthetic), dispersed/free hydrocarbons, benzene-toluene-ethylbenzene, and xylenes (BTEX) compounds, biologicals, salts, and minerals. Hydrocarbons (dispersed/dissolved crude oils) and BTEX compounds, as well as synthetic organics, present economic and environmental concerns. The former represents lost revenue, while the latter results in negative environmental impacts like emissions from surface impoundments. The overall objective of this proposal was to synthesize superhydrophilic/oleophobic and superhydrophobic/oleophilic membranes for selectively concentrating and then separating BTEX compounds and oil and grease (O&G) from PW originating from the Greater Green River Basin (GGRB) in Wyoming. Three specific research aims were pursued to accomplish this overall objective. This final report details the development of the superhydrophobic and superhydrophilic membranes, as well as the design of the membrane module prototypes specifically. The technoeconomic assessment is separately reported in another document. 1. Aim #1 – Material optimization and performance evaluation of superhydrophilic/oleophobic and superhydrophobic/oleophilic membranes made by electrospinning/spraying. 2. Aim #2 – Design and construction of cross-flow membrane modules for selectively concentrating and then separating BTEX/oil from GGRB produced water. 3. Aim #3 – Techno-economic assessment of BTEX/oil recovery, and clean water production, using superhydrophilic/oleophobic and superhydrophobic/oleophilic membrane separation for GGRB PW. Superhydrophobic membranes were synthesized by electrospinning poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) nanofibers onto polyester (PET) substrates and electrospraying nano-carbon black/PVDF-HFP onto the nanofibrous layer. These membranes were characterized by high (>8000 liters per square meter per hour per bar (LMH/bar)) permeance values for pure hydrocarbon phases and a high hydrocarbon selectivity (>96%) when treating GGRB PW. All results were obtained when operating the membrane in a crossflow configuration representative of actual field operating conditions. Solvent/oil properties, specifically viscosity and total surface energy/tension, affected permeance across the membrane, which resulted in light mineral oil (394 LMH/bar) and o-xylene (1834 LMH/bar) being characterized by lower permeance values in the pure phase tests. Mixed phase fluxes between 40 to 80 LMH were obtained for the PW when operating the membrane at a feed pressure of 0.3 bar. Flux decreased as the mixed phase concentration in the feed decreased pointing to the importance of maximizing the collision efficiency between the emulsion and the membrane surface and maximizing the emulsion concentration in the feed and the turbulence within the feed channel. These tests demonstrated that the superhydrophobic membranes developed here are a viable hydrocarbon recovery method for GGRB PWs and should be pursued for testing in pilot-scale trials. Superhydrophilic membranes were successfully synthesized via electrospinning/spraying using polyacrylonitrile (PAN) nanofibers as a base nanofibrous matrix. Integration of polyaniline (PANI) into the nanofibrous matrix produced a superior membrane, for water filtration applications, relative to PAN alone and reduced graphene oxide (RGO) when integrated into the nanofibrous matrix. This conclusion was based on the PANI-PAN resistance to flux loss (fouling) when treating model solvent/oil solutions representative of GGRB PWs and field collected PW from the GGRB. The synthesized PAN membranes outperformed a commercially available PAN membrane designed for oil/water separation. This finding indicates that the surface chemical and physical characteristics of the electrospun membranes presents improved properties for filtration of challenging waters like GGRB PWs. The electrospun membranes therefore show promise overall as a substitute for conventionally polymerized membranes in PW treatment applications. The PANI-PAN membrane specifically presents superior performance characteristics for concentration O&G prior to treatment by the hydrocarbon recovery membrane and producing high-quality filtrate for reuse and/or additional treatment (desalination).
- 1 October 2021
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 38 (10) , 936-943
Enhancing the Dissolution of Nano-Silver Using a Multidirectional Magnetic Field in Water Systems
Nano-silver (nAg), and silver ions (Ag+), present unique properties that present both opportunities and challenges for different environmental engineering applications, such as disinfection and water quality management. This is particularly true in light of the growing usage of nano-enabled water treatment technologies. This investigation examined changes in nAg size, and corresponding changes in Ag+ (dissolved) concentrations, upon passage through a multidirectional magnetic field composed of neodymium magnets. Studied process variables included flow velocity through the magnetic field (v = 7.8, 15.6, 23.3, and 31.1 cm/s), residence time (t = 300 s), and number of magnetic fields ( = ∼200 to ∼1,000 fields) within the system, which corresponded to variations in increases in single-ion anisotropy and magnetostatic energy. Passage through the magnetic fields resulted in reductions in the size of the nAg, which were proportional to flow velocity. Changes in nAg size correlated with changes in Ag+ concentration and, in turn, nAg dissolution. These changes were attributed to increases in the Helmholtz free energy induced by flowing through the magnetic field, where higher velocities corresponded to increased free energy. Given how these parameters relate to disinfection efficacy with nAg these results have important implications for disinfection processes using this nanomaterial.
- 1 October 2021
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 38 (10) , 936-943
Enhancing the Dissolution of Nano-Silver Using a Multidirectional Magnetic Field in Water Systems
Nano-silver (nAg), and silver ions (Ag+), present unique properties that present both opportunities and challenges for different environmental engineering applications, such as disinfection and water quality management. This is particularly true in light of the growing usage of nano-enabled water treatment technologies. This investigation examined changes in nAg size, and corresponding changes in Ag+ (dissolved) concentrations, upon passage through a multidirectional magnetic field composed of neodymium magnets. Studied process variables included flow velocity through the magnetic field (v = 7.8, 15.6, 23.3, and 31.1 cm/s), residence time (t = 300 s), and number of magnetic fields ( = ∼200 to ∼1,000 fields) within the system, which corresponded to variations in increases in single-ion anisotropy and magnetostatic energy. Passage through the magnetic fields resulted in reductions in the size of the nAg, which were proportional to flow velocity. Changes in nAg size correlated with changes in Ag+ concentration and, in turn, nAg dissolution. These changes were attributed to increases in the Helmholtz free energy induced by flowing through the magnetic field, where higher velocities corresponded to increased free energy. Given how these parameters relate to disinfection efficacy with nAg these results have important implications for disinfection processes using this nanomaterial.
- 1 November 2020
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 37 (11) , 717-727
Magnetic Field Effects on pH and Electrical Conductivity: Implications for Water and Wastewater Treatment
Manipulation of water chemistry plays an important role in water and wastewater treatment. Much effort has been directed at accomplishing such changes in ways that require less energy and material consumption to reduce treatment costs and improve process sustainability. Magnetic fields have been shown to affect the properties of water and its constituents. In this study, theoretical assessments of changes in electrical conductivity and proton concentration, as a function of flow velocity through a magnetic field, were developed and experimentally verified. Experiments were done using a flow-through system consisting of permanent neodymium magnets arranged in a helical pattern in a pipe to generate a constant multidirectional magnetic field (1.350 T). In accordance with increasing flow velocity (8–6 cm/s), the proton concentration decreased from 10−7 to mol/L (pH 7–7.22). The model developed in this study indicated that pH would increase from 7 to 14 at a velocity of 100 cm/s. Change of electrical conductivity increased by 100 to 250 μS/cm with increasing flow velocity. The decrease in proton concentration was due to an increase in hydrogen bonding between water molecules and protons. Electrical conductivity was increased due to weakening of the hydration shells around the constituent ions and an increase in the internal electrical field.
- 1 November 2020
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 37 (11) , 717-727
Magnetic Field Effects on pH and Electrical Conductivity: Implications for Water and Wastewater Treatment
Manipulation of water chemistry plays an important role in water and wastewater treatment. Much effort has been directed at accomplishing such changes in ways that require less energy and material consumption to reduce treatment costs and improve process sustainability. Magnetic fields have been shown to affect the properties of water and its constituents. In this study, theoretical assessments of changes in electrical conductivity and proton concentration, as a function of flow velocity through a magnetic field, were developed and experimentally verified. Experiments were done using a flow-through system consisting of permanent neodymium magnets arranged in a helical pattern in a pipe to generate a constant multidirectional magnetic field (1.350 T). In accordance with increasing flow velocity (8–6 cm/s), the proton concentration decreased from 10−7 to mol/L (pH 7–7.22). The model developed in this study indicated that pH would increase from 7 to 14 at a velocity of 100 cm/s. Change of electrical conductivity increased by 100 to 250 μS/cm with increasing flow velocity. The decrease in proton concentration was due to an increase in hydrogen bonding between water molecules and protons. Electrical conductivity was increased due to weakening of the hydration shells around the constituent ions and an increase in the internal electrical field.
- 29 December 2019
- Published by Wiley
- p. 1-17
Application of Nanocomposite Membranes for Non‐Pressure‐Driven Separation Processes
The global community grapples with a burgeoning water crisis as a result of exploding urban populations, climate change, and the finite character freshwater supplies. Despite the inherent challenges that this crisis presents, there have been many technological advancements that together give the world a new set of tools by which it may utilize nonfreshwater resources for beneficial purposes. These advancements have come in the form of new membrane‐based desalination processes, forward osmosis (FO), and membrane distillation (MD), which no longer rely on energy‐intensive hydraulic pumping to create freshwater. As such, we are now presented with the ability to desalinate water in more environmentally sustainable manners. In addition, with advancements in material science and nanotechnology we can engineer the properties of membranes to meet the unique requirements of FO and MD processes. Together, these advancements have greatly expanded the types of source waters that can be made potable. This article covers the relevant advancements in these areas to provide the reader with both the tools and the inspiration to create the separation processes of tomorrow that are needed to address the ongoing water crisis.
- 29 December 2019
- Published by Wiley
- p. 1-17
Application of Nanocomposite Membranes for Non‐Pressure‐Driven Separation Processes
The global community grapples with a burgeoning water crisis as a result of exploding urban populations, climate change, and the finite character freshwater supplies. Despite the inherent challenges that this crisis presents, there have been many technological advancements that together give the world a new set of tools by which it may utilize nonfreshwater resources for beneficial purposes. These advancements have come in the form of new membrane‐based desalination processes, forward osmosis (FO), and membrane distillation (MD), which no longer rely on energy‐intensive hydraulic pumping to create freshwater. As such, we are now presented with the ability to desalinate water in more environmentally sustainable manners. In addition, with advancements in material science and nanotechnology we can engineer the properties of membranes to meet the unique requirements of FO and MD processes. Together, these advancements have greatly expanded the types of source waters that can be made potable. This article covers the relevant advancements in these areas to provide the reader with both the tools and the inspiration to create the separation processes of tomorrow that are needed to address the ongoing water crisis.
- Open Access
- 9 July 2018
- Published by Edinburgh University Library in Journal of Water technology and Treatment methods
- Vol. 1 (4) , 1-5-10
Reducing the Scaling Potential of Oil and Gas Produced Waters with Integrated Accelerated Precipitation Softening and Microfiltration
Development of unconventional oil and natural gas resources is inexplicitly tied to the generation of saline waste waters commonly referred to as produced water...
- 9 July 2018
- Published by Edinburgh University Library in Journal of Water technology and Treatment methods
- Vol. 1 (4) , 1-5-10
Open AccessReducing the Scaling Potential of Oil and Gas Produced Waters with Integrated Accelerated Precipitation Softening and Microfiltration
Development of unconventional oil and natural gas resources is inexplicitly tied to the generation of saline waste waters commonly referred to as produced water...
- 20 January 2018
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 20 (2) , 19
Dispersing surface-modified imogolite nanotubes in polar and non-polar solvents
- 20 January 2018
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 20 (2) , 19
Dispersing surface-modified imogolite nanotubes in polar and non-polar solvents