CCChristopher T. M. Clack

Christopher T. M. Clack

*This is an algorithmically generated author record based on publicly available information.

Christopher T. M. Clack has a total of 94 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Chapter 32 : Mitigation. Fifth National Climate Assessment

    by Steven J. Davis, Rebecca S. Dodder, David D. Turner, Ines M. L. Azevedo, Morgan Bazilian, John Bistline, Sanya Carley, Christopher T. M. Clack, Joseph E. Fargione, Emily Grubert, et al.


  • Open Access

    Baseload power potential from optimally-configured wind, solar and storage power plants across the United States

    by Joshua D Rhodes, Aditya Choukulkar, Brianna Cote, Sarah A McKee, Christopher T M Clack

    In the present paper, we assessed the potential for local wind, solar PV, and energy storage to provide baseload (constant, uninterrupted) power in every county of the contiguous United States. The amount of available capacity between 2020 and 2050 was determined via a least-cost optimization model that took into account changing costs of constituent technologies and local meteorological conditions. We found that, by 2050, the potential exists for about 6.8 TW of renewable baseload power at an average cost of approximately $50 / MWh, which is competitive with current wholesale market rates for electricity. The optimal technology configurations constructed always resulted in over two hours of emergency energy reserves, with the amount increasing as the price of energy storage falls. We also found that, given current price decline trajectories, the model has a tendency to select more solar capacity than wind over time. A second part of the study performed three million simulations followed by a regression analysis to generate an online map-based tool that allows users to change input costs assumptions and compute the cost of renewable baseload electricity in every contiguous US county.


  • Open Access

    Designing the Climate Observing System of the Future

    by Elizabeth C. Weatherhead, Bruce A. Wielicki, V. Ramaswamy, Mark Abbott, Thomas P. Ackerman, Robert Atlas, Guy Brasseur, Lori Bruhwiler, Antonio J. Busalacchi, James H. Butler, et al.

    Climate observations are needed to address a large range of important societal issues including sea level rise, droughts, floods, extreme heat events, food security, and freshwater availability in the coming decades. Past, targeted investments in specific climate questions have resulted in tremendous improvements in issues important to human health, security, and infrastructure. However, the current climate observing system was not planned in a comprehensive, focused manner required to adequately address the full range of climate needs. A potential approach to planning the observing system of the future is presented in this article. First, this article proposes that priority be given to the most critical needs as identified within the World Climate Research Program as Grand Challenges. These currently include seven important topics: melting ice and global consequences; clouds, circulation and climate sensitivity; carbon feedbacks in the climate system; understanding and predicting weather and climate extremes; water for the food baskets of the world; regional sea‐level change and coastal impacts; and near‐term climate prediction. For each Grand Challenge, observations are needed for long‐term monitoring, process studies and forecasting capabilities. Second, objective evaluations of proposed observing systems, including satellites, ground‐based and in situ observations as well as potentially new, unidentified observational approaches, can quantify the ability to address these climate priorities. And third, investments in effective climate observations will be economically important as they will offer a magnified return on investment that justifies a far greater development of observations to serve society's needs.


  • Top Cited Papers
    Open Access

    Evaluation of a proposal for reliable low-cost grid power with 100% wind, water, and solar

    by Christopher T. M. Clack, Staffan A. Qvist, Jay Apt, Morgan Bazilian, Adam R. Brandt, Ken Caldeira, Steven J. Davis, Victor Diakov, Mark A. Handschy, Paul D. H. Hines, et al.

    A number of analyses, meta-analyses, and assessments, including those performed by the Intergovernmental Panel on Climate Change, the National Oceanic and Atmospheric Administration, the National Renewable Energy Laboratory, and the International Energy Agency, have concluded that deployment of a diverse portfolio of clean energy technologies makes a transition to a low-carbon-emission energy system both more feasible and less costly than other pathways. In contrast, Jacobson et al. [Jacobson MZ, Delucchi MA, Cameron MA, Frew BA (2015) Proc Natl Acad Sci USA 112(49):15060–15065] argue that it is feasible to provide “low-cost solutions to the grid reliability problem with 100% penetration of WWS [wind, water and solar power] across all energy sectors in the continental United States between 2050 and 2055”, with only electricity and hydrogen as energy carriers. In this paper, we evaluate that study and find significant shortcomings in the analysis. In particular, we point out that this work used invalid modeling tools, contained modeling errors, and made implausible and inadequately supported assumptions. Policy makers should treat with caution any visions of a rapid, reliable, and low-cost transition to entire energy systems that relies almost exclusively on wind, solar, and hydroelectric power. Significance Previous analyses have found that the most feasible route to a low-carbon energy future is one that adopts a diverse portfolio of technologies. In contrast, Jacobson et al. (2015) consider whether the future primary energy sources for the United States could be narrowed to almost exclusively wind, solar, and hydroelectric power and suggest that this can be done at “low-cost” in a way that supplies all power with a probability of loss of load “that exceeds electric-utility-industry standards for reliability”. We find that their analysis involves errors, inappropriate methods, and implausible assumptions. Their study does not provide credible evidence for rejecting the conclusions of previous analyses that point to the benefits of considering a broad portfolio of energy system options. A policy prescription that overpromises on the benefits of relying on a narrower portfolio of technologies options could be counterproductive, seriously impeding the move to a cost effective decarbonized energy system.


  • Properties of the offshore low level jet and rotor layer wind shear as measured by scanning Doppler Lidar

    by Y. L. Pichugina, W. A. Brewer, R. M. Banta, A. Choukulkar, C. T. M. Clack, M. C. Marquis, B. J. McCarty, A. M. Weickmann, S. P. Sandberg, R. D. Marchbanks, et al.

    The atmospheric flow phenomenon known as the Low Level Jet (LLJ) is an important source of wind power production in the Great Plains. However, due to the lack of measurements with the precision and vertical resolution needed, particularly at rotor heights, it is not well‐characterized or understood in offshore regions being considered for wind‐farm development. The present paper describes the properties of LLJs and wind shear through the rotor layer of a hypothetical wind turbine, as measured from a ship‐borne Doppler lidar in the Gulf of Maine in July–August 2004. LLJs, frequently observed below 600 m, were mostly during nighttime and transitional periods, but they were also were seen during some daytime hours. The presence of a LLJ significantly modified wind profiles producing vertical wind speed shear. When the wind shear was strong, the estimates of wind power based upon wind speeds measured at hub‐height could have significant errors. Additionally, the inference of hub‐height winds from near‐surface measurements may introduce further error in the wind power estimate. The lidar dataset was used to investigate the uncertainty of the simplified power‐law relation that is often employed in engineering approaches for the extrapolation of surface winds to higher elevations. The results show diurnal and spatial variations of the shear exponent empirically found from surface and hub‐height measurements. Finally, the discrepancies between wind power estimates using lidar‐measured hub‐height winds and rotor equivalent winds are discussed. Copyright © 2016 John Wiley & Sons, Ltd.


  • Open Access

    Demonstrating the effect of vertical and directional shear for resource mapping of wind power

    by Christopher T. M. Clack, Anneliese Alexander, Aditya Choukulkar, Alexander E. MacDonald

    The use of wind energy is growing around the world, and its growth is set to continue into the foreseeable future. Estimates of the wind speed and power are helpful to assess the potential of new sites for development and to facilitate electric grid integration studies. In the present paper, wind speed and power resource mapping analyses are performed. These resource mappings are produced on a 13 km, hourly model grid over the entire continental USA for the years of 2006–2014. The effects of the rotor equivalent wind speed (REWS) along with directional shear are investigated. The total dataset (wind speed and power) contains ≈152,000 model grid points, with each location containing ≈78,000 hourly time steps. The resource mapping and dataset are created from analysis fields, which are output from an advanced weather assimilation model. Two different methods were used to estimate the wind speed over the rotor swept area (with rotor diameter of 100 m). First, using a single wind speed at hub height (80 m) and, second, the REWS with directional shear. The demonstration study shows that in most locations the incorporation of the REWS reduces the average available wind power. In addition, the REWS technique estimates more wind power production at night and less production in the day compared with the hub height technique; potentially critical for siting new wind turbines and plants. However, the wind power estimate differences are dependent on seasonality, diurnal cycle and geographic location. More research is warranted into these effects to determine the level at which these features are observed at actual wind plants.© 2015 The Authors. Wind Energy published by John Wiley & Sons, Ltd.


  • Open Access

    A new formulation for rotor equivalent wind speed for wind resource assessment and wind power forecasting

    by Aditya Choukulkar, Yelena Pichugina, Christopher T. M. Clack, Ronald Calhoun, Robert Banta, Alan Brewer, Michael Hardesty

    The spurt of growth in the wind energy industry has led to the development of many new technologies to study this energy resource and improve the efficiency of wind turbines. One of the key factors in wind farm characterization is the prediction of power output of the wind farm that is a strong function of the turbulence in the wind speed and direction. A new formulation for calculating the expected power from a wind turbine in the presence of wind shear, turbulence, directional shear and direction fluctuations is presented. It is observed that wind shear, directional shear and direction fluctuations reduce the power producing capability, while turbulent intensity increases it. However, there is a complicated superposition of these effects that alters the characteristics of the power estimate that indicates the need for the new formulation. Data from two field experiments is used to estimate the wind power using the new formulation, and results are compared to previous formulations. Comparison of the estimates of available power from the new formulation is not compared to actual power outputs and will be a subject of future work. © 2015 The Authors. Wind Energy published by John Wiley & Sons, Ltd.


  • Helioseismic probing of the subsurface structure of sunspots

    by A.D. Crouch, A.C. Birch, D.C. Braun, C.T.M. Clack

    We discuss recent progress in the helioseismic probing of the subsurface structure of solar magnetic regions. To simulate the interaction of helioseismic waves with magnetic fields and thermal perturbations we use a simple model that is translation invariant in the horizontal directions, has a realistic stratification in the vertical direction, and has physically consistent boundary conditions for the waves at the upper and lower boundaries of the computational domain. Using this model we generate synthetic helioseismic data and subsequently measure time-distance travel times. We evaluate a model for the wave-speed perturbation below sunspots that replaces the sound speed in a non-magnetic model by the fast-mode speed from a magnetic model; our results indicate that this approach is unlikely to be useful in modeling wave-speed perturbations in sunspots. We develop and test an inversion algorithm for inferring the sound-speed perturbation in magnetic regions. We show that this algorithm retrieves the correct sound-speed perturbation only when the sensitivity kernels employed account for the effects of the magnetic field on the waves and the subsurface structure.