Lucia Iglesias
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lucia Iglesias has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
Manuel Bibes
Université Paris-Saclay
5 shared publicationsDongxin Zhang
Laboratoire Albert Fert, CNRS, Thales, Université Paris-Saclay, Palaiseau, France
4 shared publications- Francisco Rivadulla
Centro Singular de Investigación en Química Biolóxica e Materiais Moleculares
4 shared publications - Victor Manuel Prida
Departamento de Física, Facultad de Ciencias, Universidad de Oviedo, 33007-Oviedo, Spain
4 shared publications Alexandre Gloter
Laboratoire de Physique des Solides CNRS Université Paris-Saclay 91405 Orsay France
3 shared publications- Araceli Gutiérrez-Llorente
Escuela Superior de Ciencias Experimentales y Tecnología Universidad Rey Juan Carlos 28933 Madrid Spain
3 shared publications
Latest Publications
- Open Access
- 25 November 2025
- Published by Springer Nature in Communications Materials
- Vol. 6 (1)
Accessible synthesis of superconducting nickelates via topotactic reduction induced by aluminum sputter deposition
The discovery of superconductivity in infinite-layer nickelates (IL, ABO 2 ) has opened new avenues for understanding high-temperature superconductivity. However, progress in this field is hindered by significant synthesis challenges and the scarcity of research groups capable of producing superconducting samples. Here, we demonstrate a simple route for the topotactic reduction of nickelates using an aluminum overlayer deposited by sputtering on the precursor material (ABO 3 ), enabling the fabrication of high-quality superconducting Pr 0.8 Sr 0.2 NiO 2 thin films. By systematically optimizing the aluminum deposition parameters, we achieved superconducting samples via in situ or ex situ (after air exposure of the precursor ABO 3 films) reduction. A comparative study of their structural and transport properties shows that in situ Al reduction improves film quality, yielding a maximum superconducting onset transition temperature of 17 K, consistent with the optimal value for this compound. This sputtering-based synthesis route, significantly more accessible than existing methods, offers enhanced control and reproducibility over the reduction process, lowering barriers to the exploration of nickelate superconductors.
- 25 November 2025
- Published by Springer Nature in Communications Materials
- Vol. 6 (1)
Open AccessAccessible synthesis of superconducting nickelates via topotactic reduction induced by aluminum sputter deposition
The discovery of superconductivity in infinite-layer nickelates (IL, ABO 2 ) has opened new avenues for understanding high-temperature superconductivity. However, progress in this field is hindered by significant synthesis challenges and the scarcity of research groups capable of producing superconducting samples. Here, we demonstrate a simple route for the topotactic reduction of nickelates using an aluminum overlayer deposited by sputtering on the precursor material (ABO 3 ), enabling the fabrication of high-quality superconducting Pr 0.8 Sr 0.2 NiO 2 thin films. By systematically optimizing the aluminum deposition parameters, we achieved superconducting samples via in situ or ex situ (after air exposure of the precursor ABO 3 films) reduction. A comparative study of their structural and transport properties shows that in situ Al reduction improves film quality, yielding a maximum superconducting onset transition temperature of 17 K, consistent with the optimal value for this compound. This sputtering-based synthesis route, significantly more accessible than existing methods, offers enhanced control and reproducibility over the reduction process, lowering barriers to the exploration of nickelate superconductors.
- 17 February 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (12) , e2416963
Polarization Boost and Ferroelectricity Down to One Unit Cell in Layered Carpy‐Galy La2Ti2O7 Thin Films
Layered perovskite‐based compounds offer a range of unconventional properties enabled by their naturally anisotropic structure. Among these, the Carpy‐Galy phases (AnBnO3n+2), characterized by (110)‐oriented perovskite planes interleaved with additional oxygen layers, stand out for robust in‐plane polarization. However, the challenges associated with the synthesis of ultrathin Carpy‐Galy films and understanding the impact of strain on their properties limit their integration into devices. Here, La2Ti2O7 (n = 4) films grown on substrates imposing tensile, compressive, or negligible epitaxial strains are investigated. Surprisingly, a 3% tensile strain from DyScO3 (100) substrates facilitates layer‐by‐layer growth mode, whereas compressive (LaAlO3‐Sr2TaAlO6 (110)) or negligible (SrTiO3 (110)) epitaxial strains require post‐deposition annealing to reach comparable crystallinity. Using density‐functional theory calculations, scanning probe microscopy, X‐ray diffraction, scanning transmission electron microscopy, and polarization switching experiments, it is confirmed that these films possess exceptional ferroelectric properties, including a polarization of 18 µCcm−2 – more than three times higher than previously reported – as well as persistence of ferroelectricity down to a single‐unit‐cell thickness. This study not only advances the understanding of Carpy‐Galy phases as epitaxial thin films but also lays a foundation for their integration into advanced ferroelectric device architectures.
- 17 February 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (12) , e2416963
Polarization Boost and Ferroelectricity Down to One Unit Cell in Layered Carpy‐Galy La2Ti2O7 Thin Films
Layered perovskite‐based compounds offer a range of unconventional properties enabled by their naturally anisotropic structure. Among these, the Carpy‐Galy phases (AnBnO3n+2), characterized by (110)‐oriented perovskite planes interleaved with additional oxygen layers, stand out for robust in‐plane polarization. However, the challenges associated with the synthesis of ultrathin Carpy‐Galy films and understanding the impact of strain on their properties limit their integration into devices. Here, La2Ti2O7 (n = 4) films grown on substrates imposing tensile, compressive, or negligible epitaxial strains are investigated. Surprisingly, a 3% tensile strain from DyScO3 (100) substrates facilitates layer‐by‐layer growth mode, whereas compressive (LaAlO3‐Sr2TaAlO6 (110)) or negligible (SrTiO3 (110)) epitaxial strains require post‐deposition annealing to reach comparable crystallinity. Using density‐functional theory calculations, scanning probe microscopy, X‐ray diffraction, scanning transmission electron microscopy, and polarization switching experiments, it is confirmed that these films possess exceptional ferroelectric properties, including a polarization of 18 µCcm−2 – more than three times higher than previously reported – as well as persistence of ferroelectricity down to a single‐unit‐cell thickness. This study not only advances the understanding of Carpy‐Galy phases as epitaxial thin films but also lays a foundation for their integration into advanced ferroelectric device architectures.
- 2 December 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 110 (23)
Electron-phonon mediated superconductivity in nickel oxides- 2 December 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 110 (23)
Electron-phonon mediated superconductivity in nickel oxides- Open Access
Achieving superconductivity in infinite-layer nickelate thin films by aluminum sputtering deposition
The recent discovery of superconductivity in infinite-layer (IL, ABO$_2$) nickelates has opened a new avenue to deepen the understanding of high-temperature superconductivity. However, progress in this field is slowed by significant challenges in material synthesis and the scarcity of research groups capable of producing high quality superconducting samples. IL nickelates are obtained from a reduction of the perovskite ABO$_3$ phase, typically achieved by annealing using CaH$_2$ as a reducing agent. Here, we present a new method to synthesize superconducting infinite-layer nickelate Pr$_{0.8}$Sr$_{0.2}$NiO$_2$ thin films using an aluminum overlayer deposited by sputtering as a reducing agent. We systematically optimized the aluminum deposition parameters and obtained superconducting samples reduced either in situ or ex situ (after air exposure of the precursor ABO$_3$ films). A comparison of their crystalline quality and transport properties shows that in situ Al reduction enhances the quality of the superconducting Pr$_{0.8}$Sr$_{0.2}$NiO$_2$ thin films, achieving a maximum superconducting transition temperature $T_{c}^{onset}$ of 17 K, in agreement with the optimum value reported for this compound. This simple synthesis route, much more accessible than existing methods, offers better control and reproducibility over the topotactic transformation, opening new opportunities to gain insights into the physics of superconductivity in nickelates.Open AccessAchieving superconductivity in infinite-layer nickelate thin films by aluminum sputtering deposition
The recent discovery of superconductivity in infinite-layer (IL, ABO$_2$) nickelates has opened a new avenue to deepen the understanding of high-temperature superconductivity. However, progress in this field is slowed by significant challenges in material synthesis and the scarcity of research groups capable of producing high quality superconducting samples. IL nickelates are obtained from a reduction of the perovskite ABO$_3$ phase, typically achieved by annealing using CaH$_2$ as a reducing agent. Here, we present a new method to synthesize superconducting infinite-layer nickelate Pr$_{0.8}$Sr$_{0.2}$NiO$_2$ thin films using an aluminum overlayer deposited by sputtering as a reducing agent. We systematically optimized the aluminum deposition parameters and obtained superconducting samples reduced either in situ or ex situ (after air exposure of the precursor ABO$_3$ films). A comparison of their crystalline quality and transport properties shows that in situ Al reduction enhances the quality of the superconducting Pr$_{0.8}$Sr$_{0.2}$NiO$_2$ thin films, achieving a maximum superconducting transition temperature $T_{c}^{onset}$ of 17 K, in agreement with the optimum value reported for this compound. This simple synthesis route, much more accessible than existing methods, offers better control and reproducibility over the topotactic transformation, opening new opportunities to gain insights into the physics of superconductivity in nickelates. - Open Access
- 18 April 2024
- Published by Wiley in Advanced Science
- Vol. 11 (24) , e2309092
Toward Reliable Synthesis of Superconducting Infinite Layer Nickelate Thin Films by Topochemical Reduction
Infinite layer (IL) nickelates provide a new route beyond copper oxides to address outstanding questions in the field of unconventional superconductivity. However, their synthesis poses considerable challenges, largely hindering experimental research on this new class of oxide superconductors. That synthesis is achieved in a two‐step process that yields the most thermodynamically stable perovskite phase first, then the IL phase by topotactic reduction, the quality of the starting phase playing a crucial role. Here, a reliable synthesis of superconducting IL nickelate films is reported after successive topochemical reductions of a parent perovskite phase with nearly optimal stoichiometry. Careful analysis of the transport properties of the incompletely reduced films reveals an improvement in the strange metal behavior of their normal state resistivity over subsequent topochemical reductions, offering insight into the reduction process.
- 18 April 2024
- Published by Wiley in Advanced Science
- Vol. 11 (24) , e2309092
Open AccessToward Reliable Synthesis of Superconducting Infinite Layer Nickelate Thin Films by Topochemical Reduction
Infinite layer (IL) nickelates provide a new route beyond copper oxides to address outstanding questions in the field of unconventional superconductivity. However, their synthesis poses considerable challenges, largely hindering experimental research on this new class of oxide superconductors. That synthesis is achieved in a two‐step process that yields the most thermodynamically stable perovskite phase first, then the IL phase by topotactic reduction, the quality of the starting phase playing a crucial role. Here, a reliable synthesis of superconducting IL nickelate films is reported after successive topochemical reductions of a parent perovskite phase with nearly optimal stoichiometry. Careful analysis of the transport properties of the incompletely reduced films reveals an improvement in the strange metal behavior of their normal state resistivity over subsequent topochemical reductions, offering insight into the reduction process.
- Open Access
Towards reliable synthesis of superconducting infinite layer nickelate thin films by topochemical reduction
Infinite layer nickelates provide a new route beyond copper oxides to address outstanding questions in the field of unconventional superconductivity. However, their synthesis poses considerable challenges, largely hindering experimental research on this new class of oxide superconductors. That synthesis is achieved in a two-step process that yields the most thermodynamically stable perovskite phase first, then the infinite-layer phase by topotactic reduction, the quality of the starting phase playing a crucial role. Here, we report on reliable synthesis of superconducting infinite-layer nickelate films after successive topochemical reductions of a parent perovskite phase with nearly optimal stoichiometry. Careful analysis of the transport properties of the incompletely reduced films reveals an improvement of the strange metal behaviour of their normal state resistivity over subsequent topochemical reductions, offering insight into the reduction process.
Open AccessTowards reliable synthesis of superconducting infinite layer nickelate thin films by topochemical reduction
Infinite layer nickelates provide a new route beyond copper oxides to address outstanding questions in the field of unconventional superconductivity. However, their synthesis poses considerable challenges, largely hindering experimental research on this new class of oxide superconductors. That synthesis is achieved in a two-step process that yields the most thermodynamically stable perovskite phase first, then the infinite-layer phase by topotactic reduction, the quality of the starting phase playing a crucial role. Here, we report on reliable synthesis of superconducting infinite-layer nickelate films after successive topochemical reductions of a parent perovskite phase with nearly optimal stoichiometry. Careful analysis of the transport properties of the incompletely reduced films reveals an improvement of the strange metal behaviour of their normal state resistivity over subsequent topochemical reductions, offering insight into the reduction process.
- Open Access
- 22 April 2022
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 4 (2) , 023064
Structural instabilities of infinite-layer nickelates from first-principles simulations
Rare-earth nickelates adopting an infinite-layer phase show superconductivity once La, Pr, or Nd is substituted by a divalent cation. Either in the pristine or doped form, these materials are reported to adopt a high-symmetry, perfectly symmetric, tetragonal cell. Nevertheless, bulk compounds are scarce, hindering a full understanding of the role of chemical pressure or strain on lattice distortions that in turn could alter magnetic and electronic properties of the two-dimensional nickelates. Here, by performing a full analysis of the prototypical compound with first-principles simulations, we identify that these materials are prone to exhibit group rotations whose type and amplitude are governed by the usual -to-Ni cation size mismatch. We further show that these rotations can be easily tuned by external stimuli modifying lattice parameters such as pressure or strain. Finally, we reveal that H intercalation is favored for any infinite-layer nickelate member and pushes the propensity of the compounds to exhibit octahedra rotations.- 22 April 2022
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 4 (2) , 023064
Open AccessStructural instabilities of infinite-layer nickelates from first-principles simulations
Rare-earth nickelates adopting an infinite-layer phase show superconductivity once La, Pr, or Nd is substituted by a divalent cation. Either in the pristine or doped form, these materials are reported to adopt a high-symmetry, perfectly symmetric, tetragonal cell. Nevertheless, bulk compounds are scarce, hindering a full understanding of the role of chemical pressure or strain on lattice distortions that in turn could alter magnetic and electronic properties of the two-dimensional nickelates. Here, by performing a full analysis of the prototypical compound with first-principles simulations, we identify that these materials are prone to exhibit group rotations whose type and amplitude are governed by the usual -to-Ni cation size mismatch. We further show that these rotations can be easily tuned by external stimuli modifying lattice parameters such as pressure or strain. Finally, we reveal that H intercalation is favored for any infinite-layer nickelate member and pushes the propensity of the compounds to exhibit octahedra rotations. - 12 July 2021
- Published by American Physical Society (APS) in Physical Review B
- Vol. 104 (3) , 035123
First-principles study of electron and hole doping effects in perovskite nickelates
Rare-earth nickelates (, Y) show a striking metal-insulator transition in their bulk phase whose temperature can be tuned by the rare-earth radius. These compounds are also the parent phases of the newly identified infinite layer superconductors. Although intensive theoretical works have been devoted to understand the origin of the metal-insulator transition in the bulk, there have only been a few studies on the role of hole and electron doping by rare-earth substitutions in materials. Using first-principles calculations based on density functional theory (DFT) we study the effect of hole and electron doping in a prototypical nickelate . We perform calculations without Hubbard-like potential on Ni levels but with a meta–generalized gradient approximation better amending self-interaction errors. We find that at low doping, polarons form with intermediate localized states in the band gap resulting in a semiconducting behavior. At larger doping, the intermediate states spread more and more in the band gap until they merge either with the valence (hole doping) or the conduction (electron doping) band, ultimately resulting in a metallic state at 25% of cation substitution. These results are reminiscent of experimental data available in the literature and demonstrate that DFT simulations without any empirical parameter are qualified for studying doping effects in correlated oxides and exploring the mechanisms underlying the superconducting phase of rare-earth nickelates.- 12 July 2021
- Published by American Physical Society (APS) in Physical Review B
- Vol. 104 (3) , 035123
First-principles study of electron and hole doping effects in perovskite nickelates
Rare-earth nickelates (, Y) show a striking metal-insulator transition in their bulk phase whose temperature can be tuned by the rare-earth radius. These compounds are also the parent phases of the newly identified infinite layer superconductors. Although intensive theoretical works have been devoted to understand the origin of the metal-insulator transition in the bulk, there have only been a few studies on the role of hole and electron doping by rare-earth substitutions in materials. Using first-principles calculations based on density functional theory (DFT) we study the effect of hole and electron doping in a prototypical nickelate . We perform calculations without Hubbard-like potential on Ni levels but with a meta–generalized gradient approximation better amending self-interaction errors. We find that at low doping, polarons form with intermediate localized states in the band gap resulting in a semiconducting behavior. At larger doping, the intermediate states spread more and more in the band gap until they merge either with the valence (hole doping) or the conduction (electron doping) band, ultimately resulting in a metallic state at 25% of cation substitution. These results are reminiscent of experimental data available in the literature and demonstrate that DFT simulations without any empirical parameter are qualified for studying doping effects in correlated oxides and exploring the mechanisms underlying the superconducting phase of rare-earth nickelates.- Open Access
- 1 March 2019
- Published by AIP Publishing in APL Materials
- Vol. 7 (3) , 031109
Apparent auxetic to non-auxetic crossover driven by Co2+ redistribution in CoFe2O4 thin films
Oxide spinels of general formula AB2O4 (A = Mg2+, Fe2+; B = Al3+, Cr3+, etc.) constitute one of the most abundant crystalline structures in mineralogy. In this structure, cations distribute among octahedral and tetrahedral sites, according to their size and the crystal-field stabilization energy. The cationic arrangement determines the mechanical, magnetic, and transport properties of the spinel and can be influenced by external parameters like temperature, pressure, or epitaxial stress in the case of thin films. Here, we report a progressive change in the sign of the Poisson ratio, ν, in thin films of CoFe2O4, defining a smooth crossover from auxetic (ν < 0) to non-auxetic (ν > 0) behavior in response to epitaxial stress and temperature. Microstructural and magnetization studies, as well as ab initio calculations, demonstrate that such unusual elastic response is actually due to a progressive redistribution of Co2+ among the octahedral and tetrahedral sites of the spinel structure. The results presented in this work clarify a long standing controversy about the magnetic and elastic properties of Co-ferrites and are of general applicability for understanding the stress-relaxation mechanism in complex crystalline structures.
- 1 March 2019
- Published by AIP Publishing in APL Materials
- Vol. 7 (3) , 031109
Open AccessApparent auxetic to non-auxetic crossover driven by Co2+ redistribution in CoFe2O4 thin films
Oxide spinels of general formula AB2O4 (A = Mg2+, Fe2+; B = Al3+, Cr3+, etc.) constitute one of the most abundant crystalline structures in mineralogy. In this structure, cations distribute among octahedral and tetrahedral sites, according to their size and the crystal-field stabilization energy. The cationic arrangement determines the mechanical, magnetic, and transport properties of the spinel and can be influenced by external parameters like temperature, pressure, or epitaxial stress in the case of thin films. Here, we report a progressive change in the sign of the Poisson ratio, ν, in thin films of CoFe2O4, defining a smooth crossover from auxetic (ν < 0) to non-auxetic (ν > 0) behavior in response to epitaxial stress and temperature. Microstructural and magnetization studies, as well as ab initio calculations, demonstrate that such unusual elastic response is actually due to a progressive redistribution of Co2+ among the octahedral and tetrahedral sites of the spinel structure. The results presented in this work clarify a long standing controversy about the magnetic and elastic properties of Co-ferrites and are of general applicability for understanding the stress-relaxation mechanism in complex crystalline structures.
- 25 September 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (41) , 35367-35373
Tuning Oxygen Vacancy Diffusion through Strain in SrTiO3 Thin Films
Understanding the diffusion of oxygen vacancies in oxides under different external stimuli is crucial for the design of ion-based electronic devices, improve catalytic performance, etc. In this manuscript, using an external electric field produced by an AFM tip, we obtain the room-temperature diffusion coefficient of oxygen-vacancies in thin-films of SrTiO3 under compressive/tensile epitaxial strain. Tensile strain produces a substantial increase of the diffusion coefficient, facilitating the mobility of vacancies through the film. Additionally, the effect of tip bias, pulse time, and temperature on the local concentration of vacancies is investigated. These are important parameters of control in the production and stabilization of non-volatile states in ion-based memresistive devices. Our findings show the key role played by strain for the control of oxygen vacancy migration in thin-film oxides.
- 25 September 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (41) , 35367-35373
Tuning Oxygen Vacancy Diffusion through Strain in SrTiO3 Thin Films
Understanding the diffusion of oxygen vacancies in oxides under different external stimuli is crucial for the design of ion-based electronic devices, improve catalytic performance, etc. In this manuscript, using an external electric field produced by an AFM tip, we obtain the room-temperature diffusion coefficient of oxygen-vacancies in thin-films of SrTiO3 under compressive/tensile epitaxial strain. Tensile strain produces a substantial increase of the diffusion coefficient, facilitating the mobility of vacancies through the film. Additionally, the effect of tip bias, pulse time, and temperature on the local concentration of vacancies is investigated. These are important parameters of control in the production and stabilization of non-volatile states in ion-based memresistive devices. Our findings show the key role played by strain for the control of oxygen vacancy migration in thin-film oxides.