ABAnirban Bhowal

Anirban Bhowal

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Anirban Bhowal has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Aqua-Locate: An Accurate Underwater Positioning System Using Visible Light Communication

    by Rakhee Sharma, Chintakayala B. S. R. S. Yeshwanth, Muskan Goyal, Prasad Naik Ramavath, Anirban Bhowal

    This letter proposes an efficient and accurate underwater positioning system Aqua-Locate employed using the visible light communication (VLC). The system features strategically placed LED transmitters and a photodetector-equipped receiver. Position estimation is achieved through received signal strength (RSS), where measured light intensity is used to determine distance with the help of radiative transfer equation, followed by trilateration method. Experimental validation of the system is conducted in a controlled tank under clear, saline, and turbid water conditions and the impact of LED spacing is investigated. Positioning accuracy results indicate that increased LED power and spacing improve accuracy, while turbidity degrades it. The findings demonstrate the potential of VLC-based systems such as Aqua-Locate for short-range underwater applications requiring rapid updates and compact hardware, offering a viable alternative to acoustic methods in specific scenarios.

  • Fluid Antennas: Pioneering a New Era in Next-Generation Wireless Communications

    by Dipen Bepari, Soumen Mondal, Anirban Bhowal, Keshav Singh, Hyundong Shin, Kai-Kit Wong, Derrick Wing Kwan Ng

    The evolution towards sixth-generation (6G) wireless communication demands antenna technologies that are highly flexible, energy efficient, and scalable to satisfy the demands of massive connectivity, ultra-low latency, and dynamic propagation environments. Fluid antenna systems (FAS) have emerged as a promising solution, offering superior spatial reconfigurability through utilization of a single radio frequency (RF) chain. By dynamically adapting to channel conditions, FAS supports simplified hardware architectures, efficient interference suppression, and enhanced user separation, thereby eliminating the need for complex signal processing methods such as precoding or Successive Interference Cancellation (SIC). This survey presents a comprehensive review of FAS, starting with a tutorial-style introduction to its structural fundamentals, core multiple access mechanisms, and synergy with key 6G enablers including Non-Orthogonal Multiple Access (NOMA), Reconfigurable Intelligent Surfaces (RIS), Simultaneous Wireless Information and Power Transfer (SWIPT), Artificial Intelligence (AI) and Terahertz (THz) communication. In addition, it explores fluid material selection, port selection strategies, and recent advances in Channel State Information (CSI) acquisition, while providing a cross-layer perspective that links fluid material properties to communication performance. The transformative potential of FAS is further explored in the context of Multiple-Input Multiple-Output (MIMO) integration, AI-driven enhancements, and compatibility with other emerging wireless communication paradigms. The paper concludes by highlighting critical open challenges and proposing future research directions essential for fully realizing the capabilities of FAS in next-generation wireless systems.


  • Channel Estimation, Resource Optimization, and Experimental Validation of Multi STAR-RIS Aided UOWC System

    by Anirban Bhowal, Ramavath Prasad Naik, Pratima Das, Deepak Kumar, Shubh Lakshmi, Sakir Ahmed, Debajit Sarma

    This paper proposes an underwater optical wireless communication (UOWC) system to facilitate the data broadcasting in optical domain and allows distant users to receive data. Such benefits have been demonstrated by deploying multiple simultaneously transmitting and reflecting reconfigurable intel ligent surface (STAR-RIS), where the STAR-RISs can transmit and reflect data simultaneously in two modes of operation- energy splitting (ES) and time switching (TS). In this paper, the bit error rate (BER) performance of such a system has been evaluated experimentally as well as analytically. The phase shifts of all the optical STAR-RISs are intricately coupled, for which evolutionary algorithms such as particle swarm optimization (PSO) and differential evolution (DE) have been utilized to optimize the sum-rate of all users. For optimization, estimation of channel coefficients is necessary, which is solved using artificial neural network. The aforementioned experimental setup demonstrated that the proposed system can serve the farthest user, which cannot be served directly. The proposed method can yield around 13 dB of transmit power gain over a single optical STAR-RIS system


  • Phase Optimization and Performance Evaluation of Multi-STAR-RIS-Aided Underwater Optical Wireless Communication System

    by Ramavath Prasad Naik, Anirban Bhowal, Shubh Lakshmi, Savidhan Shetty C. S., Debajit Sarma

    This paper proposes a multiple simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) aided underwater optical wireless communication (UOWC) system, where the STAR-RISs can transmit and reflect data simultaneously in two modes of operation-energy splitting (ES) and mode switching (MS). Such a system enables us to broadcast data and enhance the coverage at reduced error rates even for moderate turbulence in UOWC systems. The phase shifts of the multiple STAR-RISs are intricately coupled, for which the optimization problem is formulated for both ES and MS modes, and solved by particle swarm optimization (PSO) and differential evolution (DE) techniques. It is demonstrated that PSO can obtain more sum-rate as compared to DE. Hence, the phase shift values obtained from PSO are utilized to validate the ensuing performance evaluation in terms of average bit error rate (ABER) and channel capacity, for which tractable expressions are derived in terms of bivariate Fox-H function. Further, outage probability expressions are derived in terms of MeijerG function. Finally, the ABER results reveal that our proposed system can generate a minimum signal-to-noise ratio (SNR) gain of 5 dB over a conventional single RIS system.


  • Device-to-Device Communications With Selection-Based Cooperative RIS

    by Anirban Bhowal, Sonia Aïssa

    This work amalgamates spatial modulation (SM) with ambient backscattering (ABSc) to address the spectral and energy efficiency demands of the power constrained device-to-device (D2D) communications in the Internet-of-things. Though incorporating reconfigurable intelligent surfaces (RISs) in the communication process can help in extending the coverage of such power constrained devices, rich scattering in the operation environment, or broken links between the nodes involved in the end-to-end communication, can adversely affect the system performance. To cope up with this challenge, a selection-based cooperative RIS protocol is proposed, and the performance of the D2D communication system, founded on SM and ABSc at the transmitter and cooperative RISs, is evaluated in terms of the bit error rate, outage probability, and energy efficiency. A link budget analysis is conducted to comprehend the effects of the RIS sizes in countering the path loss effects, and the imperfection of the channel estimation and timing synchronization of multiple RISs are also analyzed. The results reveal that the proposed communication model with cooperative RISs can overcome the path loss effects and enhance the received power levels, thereby outperforming the baseline system where a single RIS intervenes in the end-to-end communication, with a signal-to-noise ratio gain of around 10 dB for the bit error rate, outage probability, and energy efficiency. Considering different prominent SM techniques for the system operation and comparing the performance in different set-ups, it is shown that the system implementing generalized SM performs the best.


  • Polarization-Enabled MIMO Bidirectional Device-to-Device Communications via RIS

    by Anirban Bhowal, Sonia Aissa

    In future wireless networks, device-to-device (D2D) communications are expected to play an important role to support a plethora of applications. To meet the target quality of service while ensuring high reliability, and high spectral and energy efficiencies, manipulation of the radio waves by reconfigurable intelligent surfaces (RIS) will be critical. In this context, leveraging concepts of polarization, this paper proposes a framework for bidirectional D2D communications, where the data exchange between a central node and devices operating in distinct polarization states, is multiple-input multiple-output in nature and takes place via a dual-polarized RIS, in the presence of hardware impairments and imperfect interference cancellation, as well as impairments caused by the spatial correlation and cross-polarization. Performance evaluation of such a framework is conducted in terms of key metrics, namely, bit error rate, outage probability, channel capacity, and energy efficiency, for which closed-form expressions are obtained considering transmissions over Nakagami fading channels. An asymptotic analysis is also conducted to evaluate the achievable diversity gains, by approximating the Nakagami model with a tractable Gamma model. Further, the impact of imperfect channel estimation on performance is also investigated. Comparative numerical results are provided, and the effects of the main system parameters on performance are analyzed. The proposed framework is shown to provide significant performance improvements as compared to D2D communications via non-polarized RIS.


  • MIMO Device-to-Device Communications via Cooperative Dual-Polarized Intelligent Surfaces

    by Anirban Bhowal, Sonia Aissa

    By making the propagation environment a programmable entity, reconfigurable intelligent surfaces (RIS) constitute a key enabler to fulfill the quality-of-service requirements of device-to-device (D2D) communications. In practice, however, a single RIS may not be able to establish a line-of-sight path between the devices, e.g., in environments with rich scattering or when devices are far apart. This can hinder the communications especially in applications that require the transfer of different data sets from a source to multiple destinations. Considering such type of applications, this paper proposes a dual-polarized cooperative RIS-assisted MIMO D2D communication scheme, where the beam routing path via multiple RISs is selected based on the maximum received signal-to-noise ratio and path constraints. Looking into system operation in indoor environments, and utilizing a realistic channel model, tractable expressions are obtained for the system’s error rate and outage probability. An asymptotic analysis is also conducted to evaluate the diversity gain. The findings reveal significant advantages of the dual-polarized cooperative RIS scheme over other RIS-based schemes.


  • RIS-Aided Communications in Indoor and Outdoor Environments: Performance Analysis With a Realistic Channel Model

    by Anirban Bhowal, Sonia Aissa

    Reconfigurable intelligent surfaces (RIS) hold the potential to revolutionize the wireless communications industry via the dynamic control of the wireless channels to help achieve high data rates, high spectral and energy efficiencies, and low error rates, towards meeting the advanced specifications of B5G. In this context, this paper proposes a practical channel model for RIS-aided MIMO communications which considers the effects of RIS configurations, operating environments, path loss, scattering, etc. With this comprehensive channel model, the probability density function and the cumulative distribution function of the received signal-to-noise power ratio are derived by utilizing a double generalized K distribution, and closed-form expressions for the system's error rate, outage probability, and channel capacity, are obtained. The analysis highlights the outperforming of the RIS-aided communications in indoor environments as compared to outdoor use cases due to the presence of less scatterers in the former.


  • RIS-Assisted Advanced Spatial Modulation Techniques for Ambient Backscattering Communications

    by Anirban Bhowal, Sonia Aissa, Rakhesh Singh Kshetrimayum

    The dynamic control of wireless channels is a trending field of research which has been made possible by the advent of metamaterial-based reconfigurable intelligent surfaces (RIS). Moreover, for future applications in 5G and beyond, the device size constraints and power supply issues also need to be resolved before RIS can be deployed at large scale. Keeping these problems in mind, we propose RIS-assisted ambient backscattering (ABSc) communication framework utilizing advanced spatial modulation (ASM) techniques for spectral- and energy-efficient communication. Here, ABSc technique is leveraged for harnessing the power from ambient RF waves, while ASM techniques are deployed to ensure high spectral efficiencies by activating more than one but not the full set of antennas for transmission. Extensive performance analysis of ASM techniques are carried out, and upper-bounds on the ensuing error rates are derived. We corroborate the error rate upper-bound results with Monte-Carlo simulation results, and also provide comparative results to reveal the benefits of the proposed framework. In particular, it is shown that the ASM technique of improved quadrature spatial modulation (IQSM) can achieve the highest spectral efficiency. All the ASM techniques can perform better than the conventional spatial modulation technique by offering signal-to-noise power ratio gains of more than 2 dB. Additionally, RIS-assisted ASM techniques with ABSc perform better than the conventional frameworks without RIS.