Giovanni Grasselli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Giovanni Grasselli has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Bryan S. A. Tatone
University of Toronto
7 shared publications - Nicola Tisato
Department of Earth and Planetary Sciences Jackson School of Geosciences The University of Texas at Austin Austin TX USA
4 shared publications - Qi Zhao
Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University, Hong Kong, China
4 shared publications - Omid Mahabadi
Geomechanica Inc., Toronto, Canada
3 shared publications A. Biryukov
Department of Civil Engineering, University of Toronto, 35 St. George Street, Toronto, Ontario, Canada
2 shared publications- Aly Abdelaziz
Department of Civil and Mineral Engineering, University of Toronto, Toronto, Canada
2 shared publications
Latest Publications
- 7 May 2026
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 116 (4) , 1422-1441
Machine Learning–Based Automatic Microseismic Event Detection During the 17 August 2015 Mw 4.6 Induced Earthquake Sequence in Northern Montney, British Columbia, Canada
Microseismicity monitoring is critical for better understanding fracture growth and reservoir behavior in hydraulic fracturing (HF) operations, as well as fault activation processes of induced earthquakes and associated seismic hazards resulting from anthropogenic processes. Detecting seismic events and picking the first arrivals of P- and S-wave phases are essential tasks in microseismic monitoring and safe resource management. In this study, we conduct a controlled domain-transfer benchmark of state-of-the-art deep learning (DL) models for microseismic event detection on a geophone dataset recorded to monitor HF operations between 10 August and 10 September 2015 in the northern Montney play of British Columbia, Canada. During this period, an induced earthquake of Mw 4.6 occurred. After evaluating multiple pretrained pickers, we select PhaseNet and optimize its performance under significant domain shift by increasing the input data sampling rate from 100 to 500 Hz, significantly enhancing its ability to accurately identify low-signal-to-noise ratio (SNR) microseismic phases. By applying a workflow of automatic phase association and event location algorithms, we build a high-confidence, precision-oriented event catalog that successfully identifies ∼55% of a reference industrial catalog generated via migration-based stacking. The DL catalog shows highly consistent spatiotemporal patterns and moment magnitude (Mw 4.6) detection capabilities. We demonstrate that the detection gap primarily reflects fundamental differences between single-station classifiers and network-level brightness methods, with missed events typically being either true low-SNR arrivals or visually noise-like segments in the reference catalog rather than being obscured by temporal signal overlap. These findings demonstrate that the open-source package-based workflow for automatic event detection and localization may work sufficiently well compared with proprietary commercial software in microseismic monitoring, offering a viable open-source alternative for HF operators and regulatory agencies.
- 7 May 2026
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 116 (4) , 1422-1441
Machine Learning–Based Automatic Microseismic Event Detection During the 17 August 2015 Mw 4.6 Induced Earthquake Sequence in Northern Montney, British Columbia, Canada
Microseismicity monitoring is critical for better understanding fracture growth and reservoir behavior in hydraulic fracturing (HF) operations, as well as fault activation processes of induced earthquakes and associated seismic hazards resulting from anthropogenic processes. Detecting seismic events and picking the first arrivals of P- and S-wave phases are essential tasks in microseismic monitoring and safe resource management. In this study, we conduct a controlled domain-transfer benchmark of state-of-the-art deep learning (DL) models for microseismic event detection on a geophone dataset recorded to monitor HF operations between 10 August and 10 September 2015 in the northern Montney play of British Columbia, Canada. During this period, an induced earthquake of Mw 4.6 occurred. After evaluating multiple pretrained pickers, we select PhaseNet and optimize its performance under significant domain shift by increasing the input data sampling rate from 100 to 500 Hz, significantly enhancing its ability to accurately identify low-signal-to-noise ratio (SNR) microseismic phases. By applying a workflow of automatic phase association and event location algorithms, we build a high-confidence, precision-oriented event catalog that successfully identifies ∼55% of a reference industrial catalog generated via migration-based stacking. The DL catalog shows highly consistent spatiotemporal patterns and moment magnitude (Mw 4.6) detection capabilities. We demonstrate that the detection gap primarily reflects fundamental differences between single-station classifiers and network-level brightness methods, with missed events typically being either true low-SNR arrivals or visually noise-like segments in the reference catalog rather than being obscured by temporal signal overlap. These findings demonstrate that the open-source package-based workflow for automatic event detection and localization may work sufficiently well compared with proprietary commercial software in microseismic monitoring, offering a viable open-source alternative for HF operators and regulatory agencies.
- Open Access
- 25 April 2026
- Published by Elsevier in SSRN Electronic Journal
Assessment of gasification agent strategies in post-ECBM underground coal gasification: A coupled THC numerical modeling approach
Implementing underground coal gasification (UCG) in post-enhanced coalbed methane (post-ECBM) reservoirs represents a promising route for residual energy recovery; however, the pre-existing CO2-rich environment imposes additional constraints on gasification agent selection and process control. In this study, a new coupled thermo-hydro-chemical (THC) numerical framework was developed for simulating the UCG process in CO2-rich post-ECBM reservoirs. Using this framework, the gasification and techno-economic performance of different gasification agent strategies, including pure O2 injection, CO2-O2 co-injection, and water co-injection, were systematically investigated over a range of injection fluxes. The results indicate that UCG can be successfully initiated and sustained in the investigated post-ECBM setting under the adopted operating conditions. During gasification, the spatial distribution of CO2 evolves dynamically with cavity growth, suggesting that CO2 concentration patterns may provide qualitative insight into reaction-zone development. Under pure oxygen injection, increasing the flow rate accelerates coal consumption and reduces unit gas cost, but also lowers the syngas lower heating value (LHV) and combustible-component fraction. In the simulated cases, CO2 co-injection increased residual coal mass and deteriorated syngas quality, resulting in inferior economic performance relative to pure oxygen injection under the adopted assumptions. By contrast, moderate water co-injection improved syngas quality and reduced unit energy cost under low-to-moderate oxygen injection rates. Among the simulated cases, the combination of an oxygen injection rate of 3 × 10−4 m3/s and a water injection rate of 3 × 10−6 m3/s delivered the most favorable overall performance, with a peak combustible-component fraction of 81.5% and the lowest unit energy cost. Overall, the results support the potential of UCG in post-ECBM reservoirs for residual coal utilization and energy recovery.
- 25 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAssessment of gasification agent strategies in post-ECBM underground coal gasification: A coupled THC numerical modeling approach
Implementing underground coal gasification (UCG) in post-enhanced coalbed methane (post-ECBM) reservoirs represents a promising route for residual energy recovery; however, the pre-existing CO2-rich environment imposes additional constraints on gasification agent selection and process control. In this study, a new coupled thermo-hydro-chemical (THC) numerical framework was developed for simulating the UCG process in CO2-rich post-ECBM reservoirs. Using this framework, the gasification and techno-economic performance of different gasification agent strategies, including pure O2 injection, CO2-O2 co-injection, and water co-injection, were systematically investigated over a range of injection fluxes. The results indicate that UCG can be successfully initiated and sustained in the investigated post-ECBM setting under the adopted operating conditions. During gasification, the spatial distribution of CO2 evolves dynamically with cavity growth, suggesting that CO2 concentration patterns may provide qualitative insight into reaction-zone development. Under pure oxygen injection, increasing the flow rate accelerates coal consumption and reduces unit gas cost, but also lowers the syngas lower heating value (LHV) and combustible-component fraction. In the simulated cases, CO2 co-injection increased residual coal mass and deteriorated syngas quality, resulting in inferior economic performance relative to pure oxygen injection under the adopted assumptions. By contrast, moderate water co-injection improved syngas quality and reduced unit energy cost under low-to-moderate oxygen injection rates. Among the simulated cases, the combination of an oxygen injection rate of 3 × 10−4 m3/s and a water injection rate of 3 × 10−6 m3/s delivered the most favorable overall performance, with a peak combustible-component fraction of 81.5% and the lowest unit energy cost. Overall, the results support the potential of UCG in post-ECBM reservoirs for residual coal utilization and energy recovery.
- 22 April 2026
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 116 (4) , 1404-1421
Full Moment Tensor Inversions of Microseismic Events Revealing Fault Activation of the 17 August 2015 Earthquake in the Northern Montney Formation, British Columbia, Canada
Full moment tensor source mechanisms of seismic events during fault reactivation of induced earthquakes provide critical information for microseismic monitoring, and the uncertainty quantification of these full moment tensors (MTs), particularly when station coverage is uneven and limited, is fundamentally important for understanding triggering mechanisms of these earthquakes. In this study, utilizing the open-source package MTUQ (Moment Tensor Uncertainty Quantification), we invert high-frequency P-phase amplitude ratios recorded by a dense 198-geophone surface monitoring array for source mechanisms of (micro)seismic events that occurred during hydraulic fracturing operations between August and September 2015 in the northern Montney formation, British Columbia. Specifically, we obtain full MTs and their uncertainties for 567 (micro)seismic events with Mw≥0.4 in the vicinity of the main fault plane along the Blueberry fault that resulted in an Mw∼4.6 induced earthquake on 17 August and another Mw∼3.17 event ∼3 hr and 28 min later. The full MTs of these two events show a dominant double-couple component, whereas in comparison, MTs of seven foreshocks starting from three and a half days before the Mw∼4.6 event show a noticeable positive compensated linear vector dipole component (+CLVD), suggesting a tensile opening component in the mechanisms possibly associated with poroelastic stress transfer and/or aseismic slip resulting from fluid injections. The aftershocks exhibit positive isotropic components in addition to the significant +CLVD, which may be attributed to the combination of aseismic slip and fluid migration through newly formed pathways after fault reactivation.
- 22 April 2026
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
- Vol. 116 (4) , 1404-1421
Full Moment Tensor Inversions of Microseismic Events Revealing Fault Activation of the 17 August 2015 Earthquake in the Northern Montney Formation, British Columbia, Canada
Full moment tensor source mechanisms of seismic events during fault reactivation of induced earthquakes provide critical information for microseismic monitoring, and the uncertainty quantification of these full moment tensors (MTs), particularly when station coverage is uneven and limited, is fundamentally important for understanding triggering mechanisms of these earthquakes. In this study, utilizing the open-source package MTUQ (Moment Tensor Uncertainty Quantification), we invert high-frequency P-phase amplitude ratios recorded by a dense 198-geophone surface monitoring array for source mechanisms of (micro)seismic events that occurred during hydraulic fracturing operations between August and September 2015 in the northern Montney formation, British Columbia. Specifically, we obtain full MTs and their uncertainties for 567 (micro)seismic events with Mw≥0.4 in the vicinity of the main fault plane along the Blueberry fault that resulted in an Mw∼4.6 induced earthquake on 17 August and another Mw∼3.17 event ∼3 hr and 28 min later. The full MTs of these two events show a dominant double-couple component, whereas in comparison, MTs of seven foreshocks starting from three and a half days before the Mw∼4.6 event show a noticeable positive compensated linear vector dipole component (+CLVD), suggesting a tensile opening component in the mechanisms possibly associated with poroelastic stress transfer and/or aseismic slip resulting from fluid injections. The aftershocks exhibit positive isotropic components in addition to the significant +CLVD, which may be attributed to the combination of aseismic slip and fluid migration through newly formed pathways after fault reactivation.
- Open Access
- 21 April 2026
- Published by Elsevier in SSRN Electronic Journal
Assessment of gasification agent strategies in post-ECBM underground coal gasification: A coupled THC numerical modeling approach
Implementing underground coal gasification (UCG) in post-enhanced coalbed methane (post-ECBM) reservoirs represents a promising route for residual energy recovery; however, the pre-existing CO₂-rich environment imposes additional constraints on gasification agent selection and process control. In this study, a new coupled thermo-hydro-chemical (THC) numerical framework was developed for simulating the UCG process in CO₂-rich post-ECBM reservoirs. Using this framework, the gasification and techno-economic performance of different gasification agent strategies, including pure O₂ injection, CO₂-O₂ co-injection, and water co-injection, were systematically investigated over a range of injection fluxes. The results indicate that UCG can be successfully initiated and sustained in the investigated post-ECBM setting under the adopted operating conditions. During gasification, the spatial distribution of CO₂ evolves dynamically with cavity growth, suggesting that CO₂ concentration patterns may provide qualitative insight into reaction-zone development. Under pure oxygen injection, increasing the flow rate accelerates coal consumption and reduces unit gas cost, but also lowers the syngas lower heating value (LHV) and combustible-component fraction. In the simulated cases, CO₂ co-injection increased residual coal mass and deteriorated syngas quality, resulting in inferior economic performance relative to pure oxygen injection under the adopted assumptions. By contrast, moderate water co-injection improved syngas quality and reduced unit energy cost under low-to-moderate oxygen injection rates. Among the simulated cases, the combination of an oxygen injection rate of 3 × 10⁻⁴ m³/s and a water injection rate of 3 × 10⁻⁶ m³/s delivered the most favorable overall performance, with a peak combustible-component fraction of 81.5% and the lowest unit energy cost. Overall, the results support the potential of UCG in post-ECBM reservoirs for residual coal utilization and energy recovery.
- 21 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAssessment of gasification agent strategies in post-ECBM underground coal gasification: A coupled THC numerical modeling approach
Implementing underground coal gasification (UCG) in post-enhanced coalbed methane (post-ECBM) reservoirs represents a promising route for residual energy recovery; however, the pre-existing CO₂-rich environment imposes additional constraints on gasification agent selection and process control. In this study, a new coupled thermo-hydro-chemical (THC) numerical framework was developed for simulating the UCG process in CO₂-rich post-ECBM reservoirs. Using this framework, the gasification and techno-economic performance of different gasification agent strategies, including pure O₂ injection, CO₂-O₂ co-injection, and water co-injection, were systematically investigated over a range of injection fluxes. The results indicate that UCG can be successfully initiated and sustained in the investigated post-ECBM setting under the adopted operating conditions. During gasification, the spatial distribution of CO₂ evolves dynamically with cavity growth, suggesting that CO₂ concentration patterns may provide qualitative insight into reaction-zone development. Under pure oxygen injection, increasing the flow rate accelerates coal consumption and reduces unit gas cost, but also lowers the syngas lower heating value (LHV) and combustible-component fraction. In the simulated cases, CO₂ co-injection increased residual coal mass and deteriorated syngas quality, resulting in inferior economic performance relative to pure oxygen injection under the adopted assumptions. By contrast, moderate water co-injection improved syngas quality and reduced unit energy cost under low-to-moderate oxygen injection rates. Among the simulated cases, the combination of an oxygen injection rate of 3 × 10⁻⁴ m³/s and a water injection rate of 3 × 10⁻⁶ m³/s delivered the most favorable overall performance, with a peak combustible-component fraction of 81.5% and the lowest unit energy cost. Overall, the results support the potential of UCG in post-ECBM reservoirs for residual coal utilization and energy recovery.
- 17 October 2024
- Published by Elsevier in Engineering Analysis with Boundary Elements
- Vol. 169
A TOUGH-FEMM based cryogenic THM coupled model and its application to cold-region tunnels
- 17 October 2024
- Published by Elsevier in Engineering Analysis with Boundary Elements
- Vol. 169
A TOUGH-FEMM based cryogenic THM coupled model and its application to cold-region tunnels
- 9 May 2024
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 304
Crack propagation mechanism of smooth blasting holes for tunnel excavation under high in-situ stress
- 9 May 2024
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 304
Crack propagation mechanism of smooth blasting holes for tunnel excavation under high in-situ stress
- 29 September 2022
- Published by Elsevier in Computers and Geotechnics
- Vol. 152, 105045
A novel low-temperature thermo-mechanical coupling model for frost cracking simulation using the finite-discrete element method
- 29 September 2022
- Published by Elsevier in Computers and Geotechnics
- Vol. 152, 105045
A novel low-temperature thermo-mechanical coupling model for frost cracking simulation using the finite-discrete element method
- Open Access
- 1 June 2021
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 13 (3) , 487-499
How believable are published laboratory data? A deeper look into system-compliance and elastic modulus
- 1 June 2021
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 13 (3) , 487-499
Open AccessHow believable are published laboratory data? A deeper look into system-compliance and elastic modulus
- 15 January 2021
- Published by Springer Nature
- p. 140-155
Modelling Failure in Layered Geological Formations - FDEM: A Micro-mechanical Approach that Bridges Across Scales
- 15 January 2021
- Published by Springer Nature
- p. 140-155
Modelling Failure in Layered Geological Formations - FDEM: A Micro-mechanical Approach that Bridges Across Scales
- Top Cited Papers
- 10 October 2019
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 53 (3) , 1495-1519
2D and 3D Roughness Characterization
- 10 October 2019
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 53 (3) , 1495-1519
Top Cited Papers2D and 3D Roughness Characterization