Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hongneng Cai has a total of 55 co-authors. Here are the top co-authors by number of shared publications:

  • Xuecheng Han

    State Key Laboratory for Mechanical Behavior of Materials Xi' an Jiaotong University Xi' an shaanxi China

    5 shared publications
  • Jie Sun

    4 shared publications
  • Xiaofei Lou

    State Key Laboratory for Mechanical Behavior of Materials, Xi‘ an Jiaotong University, Xi‘ An, China

    3 shared publications
  • Yaping Huang

    Xi An Jiao Tong Univ, Sch Mat Sci & Engn, State Key Lab Mech Behav Mat, Xian 710049, Shaanxi, Peoples R China

    3 shared publications
  • Chang-Jiu Li

    State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi’an Jiaotong University, Xi’an, China

    2 shared publications
  • Guan-Jun Yang

    State Key Laboratory for Mechanical Behavior of Materials School of Materials Science and Engineering Xi'an Jiaotong University Xi'an Shaanxi China

    2 shared publications

Latest Publications

  • Numerical investigation on behaviors of composite laminates with initial delamination defects under impact and compression after impact

    by Xuecheng Han, Hongneng Cai, Jie Sun, Zhiyuan Wei, Yaping Huang, Lingqi Meng, Ang Wang

    The initial delamination defects may arise during the preparation of carbon fiber‐reinforced polymer (CFRP) composite laminates, so its effects need to be considered in the evolution of mechanical properties. In this article, the behaviors of composite laminates with initial delamination defects under impact and compression after impact (CAI) are investigated by numerical method. The simulation framework composed of the micromechanics of failure (MMF) theory and the mixed mode exponential cohesive zone model (ECZM) is constructed. The numerical analysis compares the effects of the interaction between four different initial delamination defects and impact loading on impact response and CAI strength at two impact velocity levels (1.336 and 2.314 m/s). Furthermore, the failure mechanisms of laminates with initial delamination defect are disclosed under CAI loading. The findings indicate that the difference in impact response is minor. The CAI strength is reduced from 250.5/173.5 to 191.5 MPa/139.1 MPa. The sufficient condition for the further significant reduction of CAI strength is that the initial delamination defects merge with the impact‐induced delamination cracks in the width direction of laminates. Moreover, the failure mechanism for CAI condition is mostly matrix damage and interlaminar crack propagation. This work provides a valuable reference for engineering failure analysis of composite laminates.


  • Open Access

    Numerical Studies on Failure Mechanisms of All-Composite Sandwich Structure with Honeycomb Core under Compression and Impact Loading Conditions

    by Xuecheng Han, Hongneng Cai, Jie Sun, Zhiyuan Wei, Yaping Huang, Ang Wang

    The all-composite sandwich structure with the honeycomb core is a lightweight and high-strength structure with broad application scenarios. The face sheet and honeycomb core of the proposed all-composite sandwich structure in this work are composed of carbon-fiber-reinforced polymer (CFRP) composites. The mechanical response and damage mechanism of the all-composite sandwich structure under out-of-plane quasi-static compression and out-of-plane impact are studied by numerical methods. The refined finite element models of the sandwich structures are built on the ABAQUS/Explicit platform. The micromechanics of failure (MMF) theory based on physical component failure is used to describe the intralaminar damage mechanism of the face sheet and honeycomb core, and the mixed-mode exponential cohesive zone model (ECZM) is utilized to simulate the initiation and evolution of interlayer damage. In addition, the cohesive contact approach is adopted to capture the debonding failure at the face-sheet/core. The numerical results show that the all-composite sandwich structure has the characteristics of large structural stiffness and strong energy absorption ability. The failure mechanism of the all-composite sandwich structure under compression is mainly matrix damage and delamination of the honeycomb core, with buckling and folding in appearance. Under out-of-plane impact, matrix damage and delamination arise on the upper sheet, little damage is observed on the lower sheet, and the delamination damage morphology tends to be circular with increasing impact energy. In addition, the interface failure of the upper-sheet/core is more than that of the lower-sheet/core. In addition, the matrix damage near the impact center of the honeycomb core tends to be consistent with the delamination contour, and a small amount of fiber failure is also observed, which manifests as a collapse morphology of the impact area. The research results enrich the understanding of the mechanical behavior of all-composite sandwich structures with honeycomb cores and provide theoretical support for their potential applications.


  • Top Cited Papers
    Open Access

    Progress in ceramic materials and structure design toward advanced thermal barrier coatings

    by Zhi-Yuan Wei, Guo-Hui Meng, Lin Chen, Guang-Rong Li, Mei-Jun Liu, Wei-Xu Zhang, Li-Na Zhao, Qiang Zhang, Xiao-Dong Zhang, Chun-Lei Wan, et al.

    Thermal barrier coatings (TBCs) can effectively protect the alloy substrate of hot components in aeroengines or land-based gas turbines by the thermal insulation and corrosion/erosion resistance of the ceramic top coat. However, the continuous pursuit of a higher operating temperature leads to degradation, delamination, and premature failure of the top coat. Both new ceramic materials and new coating structures must be developed to meet the demand for future advanced TBC systems. In this paper, the latest progress of some new ceramic materials is first reviewed. Then, a comprehensive spalling mechanism of the ceramic top coat is summarized to understand the dependence of lifetime on various factors such as oxidation scale growth, ceramic sintering, erosion, and calcium-magnesium-aluminium-silicate (CMAS) molten salt corrosion. Finally, new structural design methods for high-performance TBCs are discussed from the perspectives of lamellar, columnar, and nanostructure inclusions. The latest developments of ceramic top coat will be presented in terms of material selection, structural design, and failure mechanism, and the comprehensive guidance will be provided for the development of next-generation advanced TBCs with higher temperature resistance, better thermal insulation, and longer lifetime.


  • Behaviors of Composite Laminates Under Low-Energy Impact Using a Novel Analytical Framework

    by Xuecheng Han, Hongneng Cai, Jie Sun, Zhiyuan Wei, Yaping Huang, Lingqi Meng

    Carbon fiber-reinforced polymer (CFRP) composite laminates have the characteristics of orthogonal anisotropy and heterogeneity, so the failure mechanism under low-energy impact is very complex. As a supplement to the experiment, it is necessary to develop numerical tools to predict the mechanical behavior of composite laminates under low-energy impact. In this paper, the mechanical behavior analysis framework of composite laminates under low-energy impact load is established by using the micromechanics of failure (MMF) theory and the mixed mode exponential cohesive zone model (CZM). The failure modes of intralaminar components in composite laminates are determined by MMF theory. The damage onset and evolution process of interlaminar delamination is described by the mixed mode exponential CZM. The finite element model of composite laminates under low-energy impact is developed using the Python scripts on ABAQUS/Explicit platform. The user-defined material subroutine VUMAT is written in Fortran language. The impact responses of composite laminates with several impact energies are predicted. The intralaminar failure modes and interlaminar delamination behavior are discussed in detail. The results show that the tensile failure of matrix and interlaminar shear delamination failure are the main failure modes of composite laminates under low-energy impact load. The experimental results present better consistency with the numerical analysis, indicating that the constructed multiscale analysis method is efficient and accurate. This study expands the analysis method of mechanical behavior of composite laminates under low-energy impact. The constructed mixed mode exponential CZM also has guiding significance for the failure analysis of other bonding materials.


  • Open Access

    Understanding the Failure Mechanism of Thermal Barrier Coatings Considering the Local Bulge at the Interface between YSZ Ceramic and Bond Layer

    by Zhi-Yuan Wei, Hong-Neng Cai

    The TC/BC interface morphology in APS TBC is one of the important factors leading to crack propagation and coating failure. Long cracks are found near the bulge on the TC/BC interface. In this study, the TBC model with the bulge on the interface is developed to explore the influence of the bulge on the coating failure. Dynamic TGO growth and crack propagation are considered in the model. The effects of the bulge on the stress state and crack propagation in the ceramic layer are examined. Moreover, the effects of the distribution and number of bulges are also investigated. The results show that the bulge on the interface results in the redistribution of local stress. The early cracking of the ceramic layer occurs near the top of the bulge. One bulge near the peak or valley of the interface leads to a coating life reduction of about 75% compared with that without a bulge. The increase in the number of bulges further decreases the coating life, which is independent of the bulge location. The results in this work indicate that a smooth TC/BC interface obtained by some possible surface treatments may be an optional scenario for improving coating life.


  • Open Access

    Strategies Regarding High-Temperature Applications w.r.t Strength, Toughness, and Fatigue Life for SA508 Alloy

    by Muhammad Raies Abdullah, Cai Hongneng, Fang Liang

    In this work, the stabilities of secondary phases, including carbides, brittle phases, and inclusions, were simulated by computational thermodynamics. Calphad strategical optimization is preferable for all steel alloys regarding energy resource consumption during manufacturing and processing. The alloy composition has been changed to enhance the strength, hardenability, and longevity of a reactor pressure vessel (RPV) steel by computing the phase equilibrium calculations and predicting mechanical properties such as yield and tensile strengths hardness and martensitic and bainitic volume fractions. The stabilities of the pro-eutectoid carbides (cementite), inclusions, and brittle phases in SA508 steel are critical to the toughness and fatigue life related to the crack initiation and expansion of this steel. Overall, the simulations presented in this paper explain the mechanisms that can affect the fatigue resistance and toughness of steel and offer a possible solution to controlling these properties at elevated temperatures by optimizing the steel composition and heat treatment process parameters.


  • A high-efficient model for interface debonding analysis of carbon fiber-reinforced polymer composite

    by Xiaofei Lou, Xuecheng Han, Hongneng Cai

    Due to the difficulties in micro stress calculation of interface, most failure analysis models of macro composite structure mainly focus on the failure modes of fiber and matrix, which have not taken interface debonding into consideration. In this paper, a high-efficient failure analysis model is proposed to realize quick investigation of interface debonding as well as fiber and matrix failure in macro composite structure under complex stress condition. Stress amplification factors are adopted to realize the rapid calculation of micro stress at interface according to the macro stress of composite. Three-point bending tests with elaborate designed stacking sequences are carried out to extract the critical interfacial normal strength and shear strength used in this model. In the failure analysis of micro unit cell this model shows high accuracy in the prediction of interface debonding both in the failure modes and failure locations compared with cohesive zone model. To further inspect its capability in the analysis of macro composite structures, open-hole compression tests of quasi-isotropic laminates are carried out. Good agreements in the interface debonding mechanisms are obtained between numerical prediction and experimental results.