Cecile Charbonneau
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Cecile Charbonneau has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Trystan Watson
Swansea University, Bay Campus, Neath, Skewen SA18EN, Wales
7 shared publications - David Worsley
SPECIFIC, College of Engineering, Bay Campus, Swansea University, Swansea SA1 8EN, UK
4 shared publications - Matthew Lloyd Davies
SPECIFIC IKC, Materials Science and Engineering, Faculty of Science and Engineering, Swansea University, Swansea, UK
3 shared publications - Adam Pockett
SPECIFIC, Swansea University
2 shared publications David A. Worsley
SPECIFIC – College of Engineering, Swansea University, Baglan Bay Innovation & Knowledge Centre, Central Avenue, Baglan, Port Talbot SA12 7AX, United Kingdom
2 shared publications- Katherine Hooper
SPECIFIC IKC Faculty of Science and Engineering Swansea University Fabian way Swansea SA1 8EN UK
2 shared publications
Latest Publications
- Open Access
Exploring the Infiltration Features of Perovskite within Mesoporous Carbon Stack Solar Cells Using Broad Beam Ion Milling
Carbon perovskite solar cells (C-PSCs) are a popular photovoltaic technology currently undergoing extensive development on the global research scene. Whilst their record efficiency now rivals that of silicon PV in small-scale devices, C-PSCs still require considerable development to progress to a commercial-scale product. This study is the first of its kind to use broad beam ion milling for C-PSCs. It investigates how the carbon ink, usually optimised for maximum sheet conductivity, impacts the infiltration of the perovskite into the active layers, which in turn impacts the performance of the cells. Through the use of secondary electron microscopy with energy-dispersive X-ray spectroscopy, infiltration defects were revealed relating to carbon flake orientation. The cross sections imaged showed between a 2% and 100% inactive area within the C-PSCs due to this carbon blocking effect. The impact of these defects on the performance of solar cells is considerable, and by better understanding these defects devices can be improved for mass manufacture.
Open AccessExploring the Infiltration Features of Perovskite within Mesoporous Carbon Stack Solar Cells Using Broad Beam Ion Milling
Carbon perovskite solar cells (C-PSCs) are a popular photovoltaic technology currently undergoing extensive development on the global research scene. Whilst their record efficiency now rivals that of silicon PV in small-scale devices, C-PSCs still require considerable development to progress to a commercial-scale product. This study is the first of its kind to use broad beam ion milling for C-PSCs. It investigates how the carbon ink, usually optimised for maximum sheet conductivity, impacts the infiltration of the perovskite into the active layers, which in turn impacts the performance of the cells. Through the use of secondary electron microscopy with energy-dispersive X-ray spectroscopy, infiltration defects were revealed relating to carbon flake orientation. The cross sections imaged showed between a 2% and 100% inactive area within the C-PSCs due to this carbon blocking effect. The impact of these defects on the performance of solar cells is considerable, and by better understanding these defects devices can be improved for mass manufacture.
- Open Access
Scribing Method for Carbon Perovskite Solar Modules
The fully printable carbon triple-mesoscopic perovskite solar cell (C-PSC) has already demonstrated good efficiency and long-term stability, opening the possibility of lab-to-fab transition. Modules based on C-PSC architecture have been reported and, at present, are achieved through the accurate registration of each of the patterned layers using screen-printing. Modules based on this approach were reported with geometric fill factor (g-FF) as high as 70%. Another approach to create the interconnects, the so-called scribing method, was reported to achieve more than 90% g-FF for architectures based on evaporated metal contacts, i.e., without a carbon counter electrode. Here, for the first time, we adopt the scribing method to selectively remove materials within a C-PSC. This approach allowed a deep and selective scribe to open an aperture from the transparent electrode through all the layers, including the blocking layer, enabling a direct contact between the electrodes in the interconnects. In this work, a systematic study of the interconnection area between cells is discussed, showing the key role of the FTO/carbon contact. Furthermore, a module on 10 × 10 cm2 substrate with the optimised design showing efficiency over 10% is also demonstrated.
Open AccessScribing Method for Carbon Perovskite Solar Modules
The fully printable carbon triple-mesoscopic perovskite solar cell (C-PSC) has already demonstrated good efficiency and long-term stability, opening the possibility of lab-to-fab transition. Modules based on C-PSC architecture have been reported and, at present, are achieved through the accurate registration of each of the patterned layers using screen-printing. Modules based on this approach were reported with geometric fill factor (g-FF) as high as 70%. Another approach to create the interconnects, the so-called scribing method, was reported to achieve more than 90% g-FF for architectures based on evaporated metal contacts, i.e., without a carbon counter electrode. Here, for the first time, we adopt the scribing method to selectively remove materials within a C-PSC. This approach allowed a deep and selective scribe to open an aperture from the transparent electrode through all the layers, including the blocking layer, enabling a direct contact between the electrodes in the interconnects. In this work, a systematic study of the interconnection area between cells is discussed, showing the key role of the FTO/carbon contact. Furthermore, a module on 10 × 10 cm2 substrate with the optimised design showing efficiency over 10% is also demonstrated.
- Open Access
- 1 October 2018
- Published by Elsevier in Carbohydrate Polymers
- Vol. 198, 270-280
Characterization of pulp derived nanocellulose hydrogels using AVAP® technology
- 1 October 2018
- Published by Elsevier in Carbohydrate Polymers
- Vol. 198, 270-280
Open AccessCharacterization of pulp derived nanocellulose hydrogels using AVAP® technology
- 12 February 2018
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 2 (4) , 905-914
Dark electrical bias effects on moisture-induced degradation in inverted lead halide perovskite solar cells measured by using advanced chemical probes
Emerging lead halide perovskite materials have enormous potential for application in a range of optoelectronic devices, such as solar cells, light emitting diodes, transistors and lasers. However, the large-scale commercialization of these technologies will depend on the ability of the active material to be stable under environmental and operating conditions. In this work, we measured for the first time the electrical bias-induced degradation of inverted perovskite solar cells in the dark in different environments and concluded that humidity coupled with electrical bias results in fast degradation of CH3NH3PbI3 into PbI2. Micro-Raman and photoluminescence show that the degradation starts from the edge of the cell due to moisture ingress. By using novel local Raman-transient photocurrent measurements, we were able to probe local ion migration in the degraded region and non-degraded region and found that the formation of PbI2 can passivate the perovskite by reducing ion migration. The degradation is far from uniform across different grains as revealed by secondary electron hyperspectral imaging, an advanced scanning electron microscopy technique which allows probing the composition of individual grains from the cross section. By using potential step chronoamperometry, we also found that the bias degradation is closely related to the density of mobile ions. The unique combination of established methods with several novel analytical tools provides an insight into the origin of the bias-degradation of inverted perovskite solar cells from the nano-scale to the cell level, and demonstrates the potential of these novel tools for studying the degradation in other perovskite systems.
- 12 February 2018
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 2 (4) , 905-914
Dark electrical bias effects on moisture-induced degradation in inverted lead halide perovskite solar cells measured by using advanced chemical probes
Emerging lead halide perovskite materials have enormous potential for application in a range of optoelectronic devices, such as solar cells, light emitting diodes, transistors and lasers. However, the large-scale commercialization of these technologies will depend on the ability of the active material to be stable under environmental and operating conditions. In this work, we measured for the first time the electrical bias-induced degradation of inverted perovskite solar cells in the dark in different environments and concluded that humidity coupled with electrical bias results in fast degradation of CH3NH3PbI3 into PbI2. Micro-Raman and photoluminescence show that the degradation starts from the edge of the cell due to moisture ingress. By using novel local Raman-transient photocurrent measurements, we were able to probe local ion migration in the degraded region and non-degraded region and found that the formation of PbI2 can passivate the perovskite by reducing ion migration. The degradation is far from uniform across different grains as revealed by secondary electron hyperspectral imaging, an advanced scanning electron microscopy technique which allows probing the composition of individual grains from the cross section. By using potential step chronoamperometry, we also found that the bias degradation is closely related to the density of mobile ions. The unique combination of established methods with several novel analytical tools provides an insight into the origin of the bias-degradation of inverted perovskite solar cells from the nano-scale to the cell level, and demonstrates the potential of these novel tools for studying the degradation in other perovskite systems.
- 11 December 2017
- Published by Fundacio Scito
Modification of TiO2/CH3NH3PbI3 interface with KCl, KI, or KBr in planar perovskite solar cells
- 11 December 2017
- Published by Fundacio Scito
Modification of TiO2/CH3NH3PbI3 interface with KCl, KI, or KBr in planar perovskite solar cells
- Open Access
- 1 August 2016
- Published by Elsevier in Ceramics International
- Vol. 42 (10) , 11989-11997
Solution processing of TiO2 compact layers for 3rd generation photovoltaics
- 1 August 2016
- Published by Elsevier in Ceramics International
- Vol. 42 (10) , 11989-11997
Open AccessSolution processing of TiO2 compact layers for 3rd generation photovoltaics
- Open Access
- 24 April 2016
- Published by Wiley in Journal of Nanomaterials
- Vol. 2016, 1-10
Effect of TiO2Photoanode Porosity on Dye Diffusion Kinetics and Performance of Standard Dye-Sensitized Solar Cells
Low-cost water-based P25-TiO2pastes were formulated and used to produce porous TiO2films in application to the fabrication of dye-sensitized solar cells. The structural properties of the films were characterized using a variety of techniques such as stylus profilometry, FEG-SEM imaging, BET surface area, and BJH pore size analyses. These were compared to films produced from a commercial paste, DSL 18 NR-AO (Dyesol). The major difference was in the fraction of macroporosity: 23% of the total pore volume for films produced with the commercial material and 67–73% for the P25-TiO2films owing to the vast difference in dispersion and size distribution of the particles in the two types of pastes. The macroporosity was found to have a dramatic effect on the dye diffusion kinetics measured usingin situUV-Vis reflectance spectroscopy. The sensitization of P25-based films was much faster for heavily macroporous P25-TiO2films (>90% saturation at 15–35 mins) than for their commercial analogue (>90% saturation at 110 mins). DSC devices built with optimized P25-TiO2photoanodes showed better performance at short dye immersion time (30 mins and 1 hr) due to faster percolation of the dye molecules through the film.
- 24 April 2016
- Published by Wiley in Journal of Nanomaterials
- Vol. 2016, 1-10
Open AccessEffect of TiO2Photoanode Porosity on Dye Diffusion Kinetics and Performance of Standard Dye-Sensitized Solar Cells
Low-cost water-based P25-TiO2pastes were formulated and used to produce porous TiO2films in application to the fabrication of dye-sensitized solar cells. The structural properties of the films were characterized using a variety of techniques such as stylus profilometry, FEG-SEM imaging, BET surface area, and BJH pore size analyses. These were compared to films produced from a commercial paste, DSL 18 NR-AO (Dyesol). The major difference was in the fraction of macroporosity: 23% of the total pore volume for films produced with the commercial material and 67–73% for the P25-TiO2films owing to the vast difference in dispersion and size distribution of the particles in the two types of pastes. The macroporosity was found to have a dramatic effect on the dye diffusion kinetics measured usingin situUV-Vis reflectance spectroscopy. The sensitization of P25-based films was much faster for heavily macroporous P25-TiO2films (>90% saturation at 15–35 mins) than for their commercial analogue (>90% saturation at 110 mins). DSC devices built with optimized P25-TiO2photoanodes showed better performance at short dye immersion time (30 mins and 1 hr) due to faster percolation of the dye molecules through the film.
- 1 March 2015
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 442, 110-119
Facile self-assembly and stabilization of metal oxide nanoparticles
- 1 March 2015
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 442, 110-119
Facile self-assembly and stabilization of metal oxide nanoparticles
- 7 March 2013
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 22 (12) , 1267-1272
Rapid radiative platinisation for dye-sensitised solar cell counter electrodes
- 7 March 2013
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 22 (12) , 1267-1272
Rapid radiative platinisation for dye-sensitised solar cell counter electrodes
- 15 January 2013
- Published by Springer Nature in MRS Proceedings
- Vol. 1493, 121-126
TiO2 Film Morphology, Electron Transport and Electron Lifetime in Ultra-fast Sintered Dye-sensitized Solar Cells
- 15 January 2013
- Published by Springer Nature in MRS Proceedings
- Vol. 1493, 121-126
TiO2 Film Morphology, Electron Transport and Electron Lifetime in Ultra-fast Sintered Dye-sensitized Solar Cells