SCSim Yee Chin

Sim Yee Chin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sim Yee Chin has a total of 75 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Iron‐Based Nanoparticles Oxygen Scavenger for Suppressing Heat‐Stable Salts Formation in Amine

    by Sim Yee Chin, Soh Fong Lim, Kok Keong Lau, Mythili Thangavel, Muhammad Ridzuan Kamaruzaman


  • Open Access

    Outline of microbial fuel cells technology and their significant developments, challenges, and prospects of oxygen reduction electrocatalysts

    by Kavery Elangovan, Prabhu Saravanan, Cristian H. Campos, Felipe Sanhueza-Gómez, Maksudur Rahman Khan, Sim Yee Chin, Santhana Krishnan, Ramalinga Viswanathan Mangalaraja

    The microbial fuel cells (MFCs) which demonstrates simultaneous production of electricity and wastewater treatment have been considered as one of the potential and greener energy production technology among the available bioelectrochemical systems. The air-cathode MFCs have gained additional benefits due to using air and avoiding any chemical substances as catholyte in the cathode chamber. The sluggish oxygen reduction reaction (ORR) kinetics at the cathode is one of the main obstacles to achieve high microbial fuel cell (MFC) performances. Platinum (Pt) is one of the most widely used efficient ORR electrocatalysts due to its high efficient and more stable in acidic media. Because of the high cost and easily poisoned nature of Pt, several attempts, such as a combination of Pt with other materials, and using non-precious metals and non-metals based electrocatalysts has been demonstrated. However, the efficient practical application of the MFC technology is not yet achieved mainly due to the slow ORR. Therefore, the review which draws attention to develop and choosing the suitable cathode materials should be urgent for the practical applications of the MFCs. In this review article, we present an overview of the present MFC technology, then some significant advancements of ORR electrocatalysts such as precious metals-based catalysts (very briefly), non-precious metals-based, non-metals and carbon-based, and biocatalysts with some significant remarks on the corresponding results for the MFC applications. Lastly, we also discussed the challenges and prospects of ORR electrocatalysts for the practical application of MFCs.


  • Improved wireless LED-based light emitters for photocatalytic oxidation in a slurry annular reactor

    by Zulkifly Aziz, Mohd Mawardi Saari, Mohd Aufa Hadi Putera Zaini, Nurul A’in Nadzri, Sim Yee Chin

    In this work, a custom-built ferrite rod was designed to replace the commercial ferrite drum core in a conventional wireless light emitter driven by wireless power transfer for photocatalytic oxidation of wastewater. Simultaneous improvement in coupling coefficient and quality factor was achieved, allowing maximum energy transfer. A coupling coefficient of 0.024 was achieved at the center of the field coil at zero angular misalignment for a coil quality factor of 74 measured at the switching frequency of 185 kHz. In addition, the emitter irradiation intensity could be regulated from 80 – 380 W/m2 , a useful feature in the situation where high intensity promotes the recombination of electrons and holes

  • Toward Sustainable Production of Sugar-Based Alkyl Polyglycoside Surfactant─A Comprehensive Review on Synthesis Route and Downstream Processing

    by Sim Yee Chin, Sara Shahruddin, Gek Kee Chua, Nur Amalina Samsudin, Siti Kholijah Abdul Mudalip, Noor Fadhila Syahida Ghazali, Zulkifly Jemaat, Siti Fatihah Salleh, Farhan Mohd Said, Najiah Nadir, et al.


  • Synthesis of biocatalyst in microfluidic reactor for β-sitosterol esterification

    by Fiona W. M Ling, Hayder A. Abdulbari, Chin Sim-Yee, Wafaa K. Mahmood

    The goal of the current study is to propose and study an innovative method in synthesizing biocatalyst within a microfluidic reactor and later use it in the esterification of β-sitosterol. A droplet microreactor was specially designed and fabricated using soft-lithography technique and was used for formulation of silica nanoparticles. Sol-gel reaction method was adapted in the microreactor to produce nanoparticles which were used as the support for lipase from Rhizomucor miehei. Another microfluidics reactor was also designed and fabricated for the immobilization of the Lipase on the silica nanoparticles through a physical adsorption technique producing a biocatalyst. The catalytic efficacy of the biocatalyst was next evaluated by esterifying β-sitosterol (the main component of phytosterol) at two different catalyst loadings and comparing it to free lipase under the same experimental parameters. Samples were taken periodically and diluted with n-hexane before injecting them into gas chromatography for analysis. Spherical silica nanoparticles synthesized from the microreactor have good monodispersity with an average size of 480 nm. The silica nanoparticles produced in the microflow system showed large BET surface area, pore volume, and pore size of 125.08 m2/g, 0.42 cm3/g, and 135.70 Å, respectively. Rhizomucor miehei lipase was successfully adsorbed on the support with lipase activity around 16160 U/g. Increasing the catalyst loading increased the esterification rate from 79% to 97.3% when utilized 2.0 and 2.5 mg/ml of immobilized lipase, respectively. The findings also revealed that, under comparable reaction parameters, immobilized lipase had a higher esterification rate than free lipase.


  • Open Access

    Foam and Antifoam Behavior of PDMS in MDEA-PZ Solution in the Presence of Different Degradation Products for CO2 Absorption Process

    by Eileen Li Shien Ng, Kok Keong Lau, Sim Yee Chin, Soh Fong Lim

    Absorption is one of the most established techniques to capture CO2 from natural gas and post-combustion processes. Nevertheless, the absorption process frequently suffers from various operational issues, including foaming. The main objective of the current work is to elucidate the effect of degradation product on the foaming behavior in methyldiethanolamine (MDEA) and piperazine (PZ) solution and evaluate the antifoaming performance of polydimethylsiloxane (PDMS) antifoam. The foaming behavior was investigated based on types of degradation product, temperature, and gas flow rate. The presence of glycine, heptanoic acid, hexadecane, and bicine in MDEA-PZ solution cause significant foaming. The presence of hexadecane produced the highest amount of foam, followed by heptanoic acid, glycine and lastly bicine. It was found that increasing the gas flow rate increases foaming tendency and foam stability. Furthermore, increasing temperature increases foaming tendency, but reduces foam stability. Moreover, PDMS antifoam was able to reduce foam formation in the presence of different degradation products and at various temperatures and gas flow rates. It was found that PDMS antifoam works best in the presence of hexadecane with the highest average foam height reduction of 19%. Hence, this work will demonstrate the cause of foaming and the importance of antifoam in reducing its effect.


  • Valorization of palm oil via cross-metathesis reaction using 1-octene

    by M. Thangavel, S. Y. Chin

    The use of palm oil-derived polyol in polyurethane manufacturing is restricted owing to its poor hydroxyl value, which results in a suboptimal polyurethane network. Palm oil could be first chemically modified by cross metathesis (CM) into olefin and ester products with terminal double bonds prior to converting it to the polyols with optimum hydroxyl value. Due to the catalyst degradation and the unwanted self-metathesis reaction, the plant oil CM employing ethylene has been limited by its poor selectivity and low yield. The goal of present research is to investigate the palm oil CM using 1-octene from the aspects of parametric and kinetic analysis. The use of 1-octene was hypothesized to prevent the formation of undesired catalytic intermediates and hence allowing the ruthenium-based Hoveyda Grubbs second generation catalyst (2nd HGC) to maintain its activity and stability. Adopting one factorial at time (OFAT) in a batch system, the effect of different parameters on cross-metathesis of palm oil was examined. The variation in reaction time, temperature, reactant molar ratio of 1-octene to triolein (MOC/TR), and catalyst loadings were correlated to triolein conversion, yield, and selectivity of 1-decene. The products such as 1-decene and glyceryl tri-9-decenoate were quantified using Gas Chromatography-Mass Spectrometry (GC-MS). The maximum triolein conversion and 1-decene yield, 97.78% and 293.36% respectively, were obtained when the cross metathesis of palm oil using 1-octene occurred at 343 K for 2 h with MOC/TR of 8 and catalyst loading of 5 ppm. After three consecutive catalytic tests carried out at best operating condition, the insignificant decline in the reaction performance evidenced that the 2nd HGC catalyst remained active and stable. It was also found that the power-law model well predicted the concentration profile of the cross-metathesis of palm oil using 1-octene, estimating activation energy of 22583 J/mol. This study developed a new technically feasible process for adding value to palm oil, by enabling the use of palm oil as a feedstock for the production of polyol.


  • Mutual Inductance Estimation for Asymmetrical Coupler with Multiple Transmit Coils

    by Zulkifly Aziz, Mohd Mawardi Saari, Mohd Aufa Hadi Putera Zaini, Nurul A'IN Nadzri, Chin Sim Yee

    The standard method in calculating the mutual inductance is by using Neumann’s formula which involves double integral and solution to elliptic integrals. This work examines the coil reactance approach when doing coil analysis by finite element method. The approach of magnetic vector potential is applied to an asymmetrical coupler with multiple transmitting coils and a miniature pickup coil. Rounded-tip ferrite cored receiver is used to improve coupling. Comparison with the experimental results showed the numerically computed values are within an acceptable range of ~5 %. The observed pairing effect between multiple transmit coils is confirmed with the experimental result which further validates this approach. The method discussed herein can be applied to design a wireless coupler to power multiple light emitters in a cylindrical photoreactor.

  • Open Access

    Gas chromatography analysis for the performance evaluation of the palm oil cross-metathesis using 1-octene

    by Mythili Thangavel, Chin Sim Yee

    Palm oil is one of the important raw materials in the oleochemical industry for downstream expansion and sustainability. The built-in functionality and availability of oil worldwide make palm oil more attractive. It can be further modified using the cross-metathesis process for the production of bio-based polyol. In this study the cross metathesised palm oil was pre-treated with different types of pre-treatment methods namely transesterification, silylation, methylation and dilution to find the best pre-treatment method. Moreover, the pre-treated samples were analysed using two different Gas chromatography columns installed to the Gas chromatography flame ionisation detector (GC-FID). The best pre-treatment method was then used to prepare the samples taken from the palm oil octenolysis at different molar ratio of palm oil to 1-octene. According to the findings of this research, dilution method outperformed other pre-treatment methods.