PMParijat Mukherjee

Parijat Mukherjee

*This is an algorithmically generated author record based on publicly available information.

Parijat Mukherjee has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Constructive Place-and-Route for FinFET-Based Transistor Arrays in Analog Circuits Under Nonlinear Gradients

    by Arvind K. Sharma, Meghna Madhusudan, Steven M. Burns, Soner Yaldiz, Parijat Mukherjee, Ramesh Harjani, Sachin S. Sapatnekar

    The design of active array structures in analog circuits requires careful matching to minimize the impact of variations. This work presents a constructive approach for building these arrays to directly incorporate shifts due to process variations, considering systematic first-order and second order gradients; to account for systematic layout effects, including parasitic mismatch and layout-dependent effects due to stress; and to ensure that the resulting layout delivers high performance. The proposed algorithms are targeted to FinFET technologies and are validated for multiple analog blocks in a commercial 12nm FinFET process. The layouts generated by the proposed method are demonstrated to provide better matching and performance than prior methods.


  • A Digital LDO in 22-nm CMOS With a 4-b Self-Triggered Binary Search Windowed Flash ADC Featuring Analog Layout Generator Framework

    by Xiaosen Liu, Soner Yaldiz, Parijat Mukherjee, Steven Burns, Harish Krishnamurthy, Krishnan Ravichandran, Zakir Ahmed, Nachiket Desai, Nicolas Butzen, James Tschanz, et al.

    This paper presents an analog layout generator based DLDO with a self-triggered binary search windowed flash ADC in 22nm CMOS. A self-triggered binary search mechanism with a delay-based architecture is proposed to reduce the exponentially growing kickback noise and energy consumption of a traditional flash ADC down to the level of a SAR ADC while maintaining its high-speed feature. To conquer the complexity bottleneck of SoC development in FinFET technology, a practical analog layout generation framework is proposed to maximize the productivity of implementing analog circuit blocks in scaled CMOS process. To meet the performance, area and reliability specifications across a variety of circuits, the methodology allows varying levels of constraints from designers, thus significantly improving the physical design time & effort up to 60× compared with conventional manual approach. The DLDO features 3.55ps FoM and fully automatic generation.


  • A Digital LDO in 22nm CMOS with a 4b Self-triggered Binary Search Windowed Flash ADC Featuring Automatic Analog Layout Generator Framework

    by Xiaosen Liu, Soner Yaldiz, Parijat Mukherjee, Steven Burns, Harish Krishnamurthy, Krishnan Ravichandran, Zakir Ahmed, Nachiket Desai, Nicolas Butzen, James Tschanz, et al.

    Complex compute and communication SoCs in scaled CMOS process integrate synthesizable digital logic along with many analog/mixed-signal circuits such as PLLs and LDOs. While the digital logic blocks can be ported easily across process nodes, the analog/mixed-signal circuits demand custom manual re-design for physical layout, verification and optimization. Furthermore, fine-grain power management and noise isolation necessitate implementation of a large number (>50) of independent voltage domains on die. The manual layout effort and time for such a large variety of critical analog/mixed-signal circuit blocks becomes increasingly unaffordable in practice. Also, physical layout requirements like common-centroid and inter-digitization, and routing requirements such as matching differential nets, minimizing interconnect parasitics of critical leaf cells like differential pairs, current mirrors, resistors and capacitor arrays, necessitate multiple iterations with post-layout verifications, thus significantly impacting overall design time and time-to-market. Furthermore, availability of high-quality mask-design engineers can pose a major bottleneck to timely completion of the design, especially for the increasingly complex layout design rules in scaled process nodes. Multiple EDA frameworks, such as ALIGN [1], BAG [2] and MAGICAL [3] were reported to generate analog layouts for improving design productivity of analog circuits in scaled CMOS. However, there is still a need for a methodology that can accommodate the varying needs of analog circuits and generate high quality layout while leveraging automated placement and/or routing. In this paper, we present an analog layout generator (ALG) methodology based digital LDO (DLDO) with a self-triggered binary search windowed flash ADC in 22nm CMOS (Fig. 1) to maximize the productivity of implementing analog circuit blocks in scaled CMOS process, thus significantly improving the overall design time & effort, as well as time-to-market for complex SoCs. A self-triggered binary search mechanism with a delay-based architecture is proposed to reduce the exponentially growing kickback noise and energy consumption of a traditional flash ADC down to the level of a SAR ADC while maintaining its high speed feature.


  • Mining Patterns From Concurrent Execution Traces

    by Rubel Ahmed, Hao Zheng, Parijat Mukherjee, Mahesh C. Ketkar, Jin Yang

    This paper proposes a specification mining framework, flowminer, that automatically mines patterns from highly concurrent communication traces for system-on-chip (SoC) designs. It addresses the problem of the lack of comprehensive, accurate, and up-to-date specifications necessary to perform rigorous and thorough validation of complex SoC designs. The extracted patterns characterize how components of an SoC design communicate and coordinate with each other to realize various system functions. In flowminer, a set of inference rules and optimization techniques are presented to reduce mining complexity. Evaluation of this framework in several experiments shows promising results.


  • Open Access

    Mining Message Flows from System-on-Chip Execution Traces

    by Rubel Ahmed, Hao Zheng, Parijat Mukherjee, Mahesh C. Ketkar, Jin Yang

    Comprehensive and well-defined specifications are necessary to perform rigorous and thorough validation of system-on-chip (SoC) designs. Message flows specify how components of an SoC design communicate and coordinate with each other to realize various system functions. Message flow specifications are essential for efficient system-level validation and debug for SoC designs. However, in practice such specifications are usually not available, often ambiguous, incomplete, or even contain errors. This paper addresses that problem by proposing a specification mining framework, FlowMiner, that automatically extracts message flows from SoC execution traces, which, unlike software traces, show a high degree of concurrency. A set of inference rules and optimization techniques are presented to improve mining performance and reduce mining complexity. Evaluation of this framework in several experiments shows promising results.

  • Efficient Identification of Unstable Loops in Large Linear Analog Integrated Circuits

    by Parijat Mukherjee, G. Peter Fang, Rod Burt, Peng Li

    Stability analysis is one of the key challenges in analog circuit design. As feature sizes continue to shrink and the effect of parasitics becomes more dominant, we are forced to deal with stability analysis of increasingly complex multiloop structures with potentially hundreds of loops-a task that can no longer be dealt with using traditional methods. An automated stability checker tool that detects sources of potential ringing behavior within a reasonable turnaround time has thus been made necessary. Such a tool would not just help in debug but could also serve as a postlayout validation tool. We thus present an efficient loop finder algorithm to identify sources of ringing in large linear analog circuits. At the heart of our automated stability checker are two newly developed computationally efficient algorithms-the first to detect all poles within a given region of interest with a high degree of confidence and the second to extract second-order approximations of node impedance transfer functions given these pole locations. In this paper, we discuss these algorithms in detail, propose various optimization heuristics to further speed up the pole discovery algorithm, and then go on to develop a parallel implementation of both these underlying algorithms. It is demonstrated that these approaches together allow us to outperform the original loop finder algorithm based on direct eigen methods by two to four orders of magnitude and thus enable stability analysis of even larger extracted industrial designs than was previously possible while providing reasonable turnaround time.


  • Open Access

    Automatic stability checking for large linear analog integrated circuits

    by Parijat Mukherjee, G. Peter Fang, Rod Burt, Peng Li

    Stability analysis is one of the key challenges in the design of large linear analog circuits with complex multi-loop structures. In this paper, we present an efficient loop finder algorithm to identify potentially unstable loops in such circuits. At the heart of our automated stability checker lie two newly developed computationally efficient algorithms --- the first to detect all poles within a given region of interest and the second to extract second order approximations of node impedance transfer functions given these pole locations. It is shown that the proposed technique outperforms existing stability methods by more than one order of magnitude for medium sized circuits and enables stability analysis of large extracted industrial designs which was previously infeasible.