İbRahim Murat Afat
İbRahim Murat Afat has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Onur Gönül
Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Marmara University, Istanbul, Turkey
3 shared publicationsEmine Tuna Akdoğan
Marmara University, Faculty of Dentistry, Department of Oral and Maxillofacial Surgery, Turkey
2 shared publications- Onur Gönül
Department of Oral and Maxillofacial Surgery, Faculty of Dentistry Marmara University Istanbul Türkiye
2 shared publications - Ahmet Usame Çiçek
Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Marmara University, 34722 İstanbul, Turkey
1 shared publication - Alpay Demir
Department of Oral and Maxillofacial Surgery, Faculty of Dentistry Marmara University Istanbul Türkiye
1 shared publication - Cem Berk Türk
Department of Pathology Başakşehir Çam and Sakura City Hospital Istanbul Türkiye
1 shared publication
Latest Publications
- 4 November 2026
- Published by Wiley in Clinical Implant Dentistry and Related Research
- Vol. 28 (6)
DFDBA With or Without Platelet‐Rich Fibrin in Maxillary Sinus Augmentation: A Randomized Split‐Mouth Clinical Trial
Objectives: To compare histologic and histomorphometric outcomes after bilateral lateral maxillary sinus augmentation with demineralized freeze‐dried bone allograft (DFDBA) alone versus DFDBA combined with platelet‐rich fibrin (PRF), and to report 1‐year prosthetic follow‐up of the restored implants. Materials and Methods: This randomized split‐mouth clinical trial included subjects requiring bilateral lateral maxillary sinus augmentation before implant placement. In each subject, one sinus was randomly assigned to DFDBA alone and the contralateral sinus to DFDBA combined with leukocyte‐ and platelet‐rich fibrin (L‐PRF) and injectable PRF (i‐PRF). Bone biopsy specimens were harvested at the clinically relevant 6‐month implant placement time point. The primary outcome was newly formed bone. Secondary histomorphometric outcomes were residual graft material, connective tissue, and fibrosis; inflammation and necrosis were assessed histologically. Clinical and radiographic prosthetic follow‐up was performed 1 year after definitive prosthetic loading. Paired comparisons were performed using the Wilcoxon signed‐rank test. Results: Of 24 enrolled subjects, 21 completed follow‐up and contributed 42 sinus sites to the paired analysis. Median newly formed bone was 48.72% (IQR, 33.33%–63.33%) on the PRF side and 45.76% (IQR, 37.14%–54.90%) on the non‐PRF side ( p = 0.5). Residual graft material was 6.74% versus 4.23% ( p = 0.2), connective tissue was 31.48% versus 36.92% ( p = 0.016), and fibrosis was 3.42% versus 2.56% ( p > 0.9). No inflammation or necrosis was observed. Following replacement of one implant that failed before prosthetic loading, all definitively restored implants remained functional during the 1‐year prosthetic follow‐up. Clinical and radiographic follow‐up was uneventful, and no biologic or prosthetic complications requiring intervention were observed. Conclusions: Adding PRF to DFDBA did not significantly increase newly formed bone at the 6‐month implant placement time point. The lower connective tissue proportion on the PRF side may suggest altered tissue maturation; however, this secondary finding should be interpreted cautiously. Definitively restored implants showed 100% prosthetic survival during 1‐year follow‐up. Trial Registration: ClinicalTrials.gov Identifier: NCT07348198; https://clinicaltrials.gov/study/NCT07348198 . This clinical trial was not registered prior to participant recruitment and randomization.
- 4 November 2026
- Published by Wiley in Clinical Implant Dentistry and Related Research
- Vol. 28 (6)
DFDBA With or Without Platelet‐Rich Fibrin in Maxillary Sinus Augmentation: A Randomized Split‐Mouth Clinical Trial
Objectives: To compare histologic and histomorphometric outcomes after bilateral lateral maxillary sinus augmentation with demineralized freeze‐dried bone allograft (DFDBA) alone versus DFDBA combined with platelet‐rich fibrin (PRF), and to report 1‐year prosthetic follow‐up of the restored implants. Materials and Methods: This randomized split‐mouth clinical trial included subjects requiring bilateral lateral maxillary sinus augmentation before implant placement. In each subject, one sinus was randomly assigned to DFDBA alone and the contralateral sinus to DFDBA combined with leukocyte‐ and platelet‐rich fibrin (L‐PRF) and injectable PRF (i‐PRF). Bone biopsy specimens were harvested at the clinically relevant 6‐month implant placement time point. The primary outcome was newly formed bone. Secondary histomorphometric outcomes were residual graft material, connective tissue, and fibrosis; inflammation and necrosis were assessed histologically. Clinical and radiographic prosthetic follow‐up was performed 1 year after definitive prosthetic loading. Paired comparisons were performed using the Wilcoxon signed‐rank test. Results: Of 24 enrolled subjects, 21 completed follow‐up and contributed 42 sinus sites to the paired analysis. Median newly formed bone was 48.72% (IQR, 33.33%–63.33%) on the PRF side and 45.76% (IQR, 37.14%–54.90%) on the non‐PRF side ( p = 0.5). Residual graft material was 6.74% versus 4.23% ( p = 0.2), connective tissue was 31.48% versus 36.92% ( p = 0.016), and fibrosis was 3.42% versus 2.56% ( p > 0.9). No inflammation or necrosis was observed. Following replacement of one implant that failed before prosthetic loading, all definitively restored implants remained functional during the 1‐year prosthetic follow‐up. Clinical and radiographic follow‐up was uneventful, and no biologic or prosthetic complications requiring intervention were observed. Conclusions: Adding PRF to DFDBA did not significantly increase newly formed bone at the 6‐month implant placement time point. The lower connective tissue proportion on the PRF side may suggest altered tissue maturation; however, this secondary finding should be interpreted cautiously. Definitively restored implants showed 100% prosthetic survival during 1‐year follow‐up. Trial Registration: ClinicalTrials.gov Identifier: NCT07348198; https://clinicaltrials.gov/study/NCT07348198 . This clinical trial was not registered prior to participant recruitment and randomization.
- Open Access
- 14 October 2025
- Published by Springer Nature in BMC Oral Health
- Vol. 25 (1) , 1-8
Tramadol combined with local anesthesia for postoperative pain in third molar surgery
Postoperative pain is a significant challenge in oral surgery. Tramadol exhibits both systemic and local analgesic effects, with proven efficacy in combination with local anesthetics. This study evaluated the efficacy of local anesthetics combined with tramadol in reducing pain and analgesic use after third molar surgery. This randomized, double-blind trial included ASA I–II patients aged 18–50 years and weighing 70–80 kg who were undergoing impacted third molar surgery. Patients requiring extra anesthesia, those with tramadol hypersensitivity, or those who recently used sedatives were excluded. Two local anesthetic solutions were compared: the LT group (tramadol and articaine with epinephrine) and the LA group (articaine with epinephrine, control). Postoperative pain was measured as the primary outcome via a visual analog scale (VAS) at multiple time points (10 min and 1, 2, 4, 6, 12, 24 and 48 h postsurgery). The secondary outcomes included the timing of the first analgesic intake and the total number of analgesic doses consumed within 48 h. The covariates included age, sex, BMI, surgical duration, and adverse effects (nausea, vomiting, burning). Age and surgical duration were analyzed with t tests; VAS scores and analgesic use were analyzed with Mann–Whitney U tests; and categorical data were analyzed with Fisher’s exact test or Yates’ correction (p < 0.01). Sixty patients were randomized into the LT (n = 30) and LA (n = 30) groups. Age, sex, and BMI distributions were similar between the groups. VAS pain scores were lower in the LT group at 1, 2, and 6 h (mean difference: -4.9, -1.9, and − 1.4; p < 0.01) but higher at 4 h (mean difference: 1.5; p < 0.01). The LT group required their first analgesic later (5.2 ± 0.8 vs. 2.0 ± 0.6 h; mean difference: 3.1; p < 0.01) and consumed fewer analgesics (1.8 ± 0.5 vs. 3.6 ± 0.8 doses; mean difference: -1.8; p < 0.01). A transient higher VAS score was observed at 4 h in the LT group, likely reflecting delayed analgesic use. Adverse effects were minimal and not significantly different between groups. Local anesthetics combined with tramadol reduce pain and analgesic use after third molar surgery. This strategy improves recovery and warrants further research for broader applications. ClinicalTrials.gov NCT05614440, Date of registration 14 November 2022.
- 14 October 2025
- Published by Springer Nature in BMC Oral Health
- Vol. 25 (1) , 1-8
Open AccessTramadol combined with local anesthesia for postoperative pain in third molar surgery
Postoperative pain is a significant challenge in oral surgery. Tramadol exhibits both systemic and local analgesic effects, with proven efficacy in combination with local anesthetics. This study evaluated the efficacy of local anesthetics combined with tramadol in reducing pain and analgesic use after third molar surgery. This randomized, double-blind trial included ASA I–II patients aged 18–50 years and weighing 70–80 kg who were undergoing impacted third molar surgery. Patients requiring extra anesthesia, those with tramadol hypersensitivity, or those who recently used sedatives were excluded. Two local anesthetic solutions were compared: the LT group (tramadol and articaine with epinephrine) and the LA group (articaine with epinephrine, control). Postoperative pain was measured as the primary outcome via a visual analog scale (VAS) at multiple time points (10 min and 1, 2, 4, 6, 12, 24 and 48 h postsurgery). The secondary outcomes included the timing of the first analgesic intake and the total number of analgesic doses consumed within 48 h. The covariates included age, sex, BMI, surgical duration, and adverse effects (nausea, vomiting, burning). Age and surgical duration were analyzed with t tests; VAS scores and analgesic use were analyzed with Mann–Whitney U tests; and categorical data were analyzed with Fisher’s exact test or Yates’ correction (p < 0.01). Sixty patients were randomized into the LT (n = 30) and LA (n = 30) groups. Age, sex, and BMI distributions were similar between the groups. VAS pain scores were lower in the LT group at 1, 2, and 6 h (mean difference: -4.9, -1.9, and − 1.4; p < 0.01) but higher at 4 h (mean difference: 1.5; p < 0.01). The LT group required their first analgesic later (5.2 ± 0.8 vs. 2.0 ± 0.6 h; mean difference: 3.1; p < 0.01) and consumed fewer analgesics (1.8 ± 0.5 vs. 3.6 ± 0.8 doses; mean difference: -1.8; p < 0.01). A transient higher VAS score was observed at 4 h in the LT group, likely reflecting delayed analgesic use. Adverse effects were minimal and not significantly different between groups. Local anesthetics combined with tramadol reduce pain and analgesic use after third molar surgery. This strategy improves recovery and warrants further research for broader applications. ClinicalTrials.gov NCT05614440, Date of registration 14 November 2022.
- Open Access
Biomechanical Comparison of Asymmetric Implant Configurations for All-on-Four Treatment Using Three-Dimensional Finite Element Analysis
The aim of this study is to examine the effect of unilaterally more posterior placement of implants (Straumann BLT 4.1 mm in diameter and 12 mm long) applied according to the all-on-four concept on the stress distribution on bone, implants, and other prosthetic components, using the finite element analysis method. Three scenarios were modelled: For Model 1 (M1), anterior implants were placed symmetrically perpendicular to the bone in the right and left lateral incisor region, while the necks of the posterior implants placed symmetrically in the second premolar region were angled at 30 degrees. For Model 2 (M2) the implant in the left second premolar region was placed to the first molar region unilaterally. For Model 3 (M3) the implant in the left lateral incisor region was placed to the canine region unilaterally. Vertical and oblique forces (100 N) were applied in the right first molar region. The von Mises and maximum (Pmax) and minimum (Pmin) principal stresses were obtained. The highest stress concentration on the cortical bone was observed in the second premolar region in all models when oblique forces were applied. M1 was highest (8.992 MPa) followed closely by M3 (8.780 MPa) and M2 was lowest (3.692 MPa). The highest stress concentration on the prosthetic parts was observed in this framework when oblique forces were applied. M2 was highest (621.43 MPa) followed by M3 (409.16 MPa) and the lowest was M1 (309.43 MPa). It is thought that placing the implant further posterior to first molar region may prevent the bone resorption that occurs with high stress around the crestal bone. However, increased stress on the implants and prosthetic parts may lead to failures.
Open AccessBiomechanical Comparison of Asymmetric Implant Configurations for All-on-Four Treatment Using Three-Dimensional Finite Element Analysis
The aim of this study is to examine the effect of unilaterally more posterior placement of implants (Straumann BLT 4.1 mm in diameter and 12 mm long) applied according to the all-on-four concept on the stress distribution on bone, implants, and other prosthetic components, using the finite element analysis method. Three scenarios were modelled: For Model 1 (M1), anterior implants were placed symmetrically perpendicular to the bone in the right and left lateral incisor region, while the necks of the posterior implants placed symmetrically in the second premolar region were angled at 30 degrees. For Model 2 (M2) the implant in the left second premolar region was placed to the first molar region unilaterally. For Model 3 (M3) the implant in the left lateral incisor region was placed to the canine region unilaterally. Vertical and oblique forces (100 N) were applied in the right first molar region. The von Mises and maximum (Pmax) and minimum (Pmin) principal stresses were obtained. The highest stress concentration on the cortical bone was observed in the second premolar region in all models when oblique forces were applied. M1 was highest (8.992 MPa) followed closely by M3 (8.780 MPa) and M2 was lowest (3.692 MPa). The highest stress concentration on the prosthetic parts was observed in this framework when oblique forces were applied. M2 was highest (621.43 MPa) followed by M3 (409.16 MPa) and the lowest was M1 (309.43 MPa). It is thought that placing the implant further posterior to first molar region may prevent the bone resorption that occurs with high stress around the crestal bone. However, increased stress on the implants and prosthetic parts may lead to failures.
- 1 February 2019
- Published by Elsevier in Journal of Cranio-Maxillofacial Surgery
- Vol. 47 (2) , 280-286
Effects of leukocyte- and platelet-rich fibrin alone and combined with hyaluronic acid on early soft tissue healing after surgical extraction of impacted mandibular third molars: A prospective clinical study
- 1 February 2019
- Published by Elsevier in Journal of Cranio-Maxillofacial Surgery
- Vol. 47 (2) , 280-286
Effects of leukocyte- and platelet-rich fibrin alone and combined with hyaluronic acid on early soft tissue healing after surgical extraction of impacted mandibular third molars: A prospective clinical study