Ivonete Oliveira Barcellos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ivonete Oliveira Barcellos has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Marcel Jefferson Gonçalves
Universidade Regional de Blumenau
3 shared publications - Lorena Benathar Ballod Tavares
Universidade Regional de Blumenau
2 shared publications - Amábile Colla Prando1 shared publication
Ana Paula Serafini Immich
Engineering Department UFSC‐Federal University of Santa Catarina Campus Blumenau, Pomerode, 710 Blumenau 89065‐300 Brazil
1 shared publicationAna Paula Wünsch Boitt
Universidade Regional de Blumenau - FURB
1 shared publicationAndré Cadore Pereira
Department of Chemistry FURB‐University of Blumenau Antônio da Veiga, 140 Blumenau 89030‐103 Brazil
1 shared publication
Latest Publications
- Open Access
- 8 September 2025
- Published by Wiley in Coloration Technology
- Vol. 142 (3) , 333-353
From plant to fabric: Environmental opportunities associated with annatto dye for sustainable development in the textile industry
Natural dyes are compounds that occur naturally in several organisms and are classified based on chemical structure and application method. The literature cites several natural dyes used in industrial transformation processes. Annatto dye is used in the food industry, and its biological pigment is extracted from the annatto seed. However, this dye has shown a high number of potential applications in the textile industry. Annatto dye shows excellent stability and more attractive coloration in the textile process than other natural dyes described in the literature. In addition, the versatility of annatto dye makes its application possible in natural, artificial and synthetic fibres in both dyeing and printing processes. In this review, we provide an overview of the current situation with regard to the potential of annatto dye for the textile industry and its sustainable aspects. The classification, stability and applications in natural and synthetic fibres, as well as the effect of using mordants and process conditions in natural and synthetic fabrics dyeing, and the printing process using annatto dye, are reported, to explore a topic with potential for expansion and application in the textile industry. In addition, strategies to improve washing and light fastness are identified, along with a proposal for the molecular interactions occurring between textile fibres and annatto dye.
- 8 September 2025
- Published by Wiley in Coloration Technology
- Vol. 142 (3) , 333-353
Open AccessFrom plant to fabric: Environmental opportunities associated with annatto dye for sustainable development in the textile industry
Natural dyes are compounds that occur naturally in several organisms and are classified based on chemical structure and application method. The literature cites several natural dyes used in industrial transformation processes. Annatto dye is used in the food industry, and its biological pigment is extracted from the annatto seed. However, this dye has shown a high number of potential applications in the textile industry. Annatto dye shows excellent stability and more attractive coloration in the textile process than other natural dyes described in the literature. In addition, the versatility of annatto dye makes its application possible in natural, artificial and synthetic fibres in both dyeing and printing processes. In this review, we provide an overview of the current situation with regard to the potential of annatto dye for the textile industry and its sustainable aspects. The classification, stability and applications in natural and synthetic fibres, as well as the effect of using mordants and process conditions in natural and synthetic fabrics dyeing, and the printing process using annatto dye, are reported, to explore a topic with potential for expansion and application in the textile industry. In addition, strategies to improve washing and light fastness are identified, along with a proposal for the molecular interactions occurring between textile fibres and annatto dye.
- 10 January 2025
- Published by Wiley in Coloration Technology
Study of the colouristic capacity of the natural annatto dye in dyeing polyester fabrics and recycled yarns
The textile sector has been the subject of research aimed at discovering more sustainable alternatives to harmful chemicals, and coloration technologies. In this study, the colouristic capacity of the natural annatto dye was evaluated in 100% polyester (PES) fabrics and in 100% PES fabrics with recycled thread. A comparative characterisation of a dye extracted directly from annatto seeds with a commercial natural dye was also carried out. The dyeing processes were conducted with the commercial natural dye at temperatures of 105, 110 and 115°C and pH levels of 4, 4.5 and 5, following a 22 full experimental design including two axial points and triplicate in the central point. The dyed fabric samples were subjected to wash fastness and dry and wet rubbing tests, to evaluate colour quality. The results were analysed using Statistica software, and the 100% PES fabric samples with the best exhaustion values (91.9%), colour intensity (K/S) values (1.44) and satisfactory fastness values were dyed at a temperature of 117°C and pH of 4.5. Furthermore, samples with recycled PES yarn were dyed and compared with conventional PES yarn, demonstrating similar dye and fastness characteristics, as well as intense coloration.
- 10 January 2025
- Published by Wiley in Coloration Technology
Study of the colouristic capacity of the natural annatto dye in dyeing polyester fabrics and recycled yarns
The textile sector has been the subject of research aimed at discovering more sustainable alternatives to harmful chemicals, and coloration technologies. In this study, the colouristic capacity of the natural annatto dye was evaluated in 100% polyester (PES) fabrics and in 100% PES fabrics with recycled thread. A comparative characterisation of a dye extracted directly from annatto seeds with a commercial natural dye was also carried out. The dyeing processes were conducted with the commercial natural dye at temperatures of 105, 110 and 115°C and pH levels of 4, 4.5 and 5, following a 22 full experimental design including two axial points and triplicate in the central point. The dyed fabric samples were subjected to wash fastness and dry and wet rubbing tests, to evaluate colour quality. The results were analysed using Statistica software, and the 100% PES fabric samples with the best exhaustion values (91.9%), colour intensity (K/S) values (1.44) and satisfactory fastness values were dyed at a temperature of 117°C and pH of 4.5. Furthermore, samples with recycled PES yarn were dyed and compared with conventional PES yarn, demonstrating similar dye and fastness characteristics, as well as intense coloration.
- 31 March 2022
- Published by Brazilian Journals in Brazilian Journal of Development
- Vol. 8 (4) , 29399-29421
Compósitos poliméricos e o meio ambiente: um estudo sobre cargas alternativas e compósitos de polipropileno no século XXI no Brasil / Polymeric composites and the environment: a study on alternative fillers for polypropylene composites in the 21st century in Brazil
O desenvolvimento de novos materiais, tem se pautado, de forma cada vez mais crescente, visando produções mais sustentáveis, com o aproveitamento de matérias-primas já existentes ou resíduos industriais, a fim de diminuir os impactos ambientais. Este manuscrito tem como objetivo um levantamento bibliográfico detalhado entre dissertações e teses defendidas no Brasil, bem como artigos publicados em periódicos especializados, com ênfase aos nacionais, de 2000 até a atualidade, envolvendo estudos com compósitos à base de polipropileno. Também tem como finalidade apresentar propostas de cargas alternativas (minerais, vegetais e resíduos industriais) para matrizes termoplásticas. Esta abordagem de revisão contribuirá tanto com as instituições de ensino e pesquisa, quanto com os setores privados de manufatura de poliolefinas, e desta forma, atraindo também o interesse do setor produtivo por este periódico.
- 31 March 2022
- Published by Brazilian Journals in Brazilian Journal of Development
- Vol. 8 (4) , 29399-29421
Compósitos poliméricos e o meio ambiente: um estudo sobre cargas alternativas e compósitos de polipropileno no século XXI no Brasil / Polymeric composites and the environment: a study on alternative fillers for polypropylene composites in the 21st century in Brazil
O desenvolvimento de novos materiais, tem se pautado, de forma cada vez mais crescente, visando produções mais sustentáveis, com o aproveitamento de matérias-primas já existentes ou resíduos industriais, a fim de diminuir os impactos ambientais. Este manuscrito tem como objetivo um levantamento bibliográfico detalhado entre dissertações e teses defendidas no Brasil, bem como artigos publicados em periódicos especializados, com ênfase aos nacionais, de 2000 até a atualidade, envolvendo estudos com compósitos à base de polipropileno. Também tem como finalidade apresentar propostas de cargas alternativas (minerais, vegetais e resíduos industriais) para matrizes termoplásticas. Esta abordagem de revisão contribuirá tanto com as instituições de ensino e pesquisa, quanto com os setores privados de manufatura de poliolefinas, e desta forma, atraindo também o interesse do setor produtivo por este periódico.
- 31 March 2022
- Published by Brazilian Journals in Brazilian Journal of Development
- Vol. 8 (4) , 24848-24866
Utilização de resíduo da indústria Bunge, com e sem tratamento prévio, como adsorvente de corantes ácidos / Use of waste from the Bunge industry, with and without prior treatment, as adsorbent of acid dyes
O efluente das indústrias têxteis é um motivo de grande preocupação, pois é necessário atender os critérios de legislação, como o CONAMA e leis municipais para o seu devido tratamento. Descartes indevidos podem ocorrer, mesmo com as legislações existentes, pois os procedimentos e os materiais empregados são considerados onerosos para alguns. Foi pensado em uma alternativa mais barata para o tratamento de efluentes têxteis, que consiste no aproveitamento de um resíduo argiloso de clarificação de óleo vegetal (RC) gerado pela empresa Bunge, como adsorvente para dois corantes ácidos, o amarelo e azul Colorcid, comumente empregados nos tingimentos de fibras de poliamida. O processo para remoção dos corantes foi através da adsorção, empregando RC em soluções aquosas dos corantes têxteis. Os tratamentos foram realizados em um banho termostatizado do tipo Dubnoff sob agitação constante de 130 rpm em diferentes temperaturas (25, 30, 40 e 50°C), e quantidades de adsorvente (0,5 g, 0,75 g e 1 g). Os experimentos foram monitorados por meio do espectrofotômetro de UV-visível Shimadzu 1800 para a determinação da eficiência dos adsorventes na remoção do corante. Os resultados obtidos foram satisfatórios, apresentaram eficiências entre 84% - 100% para a adsorção dos corantes estudados. Todos os adsorventes obtiveram valores similares de eficiência, mas o adsorvente calcinado demonstrou uma solução mais limpa no final que os demais. Com o aumento da temperatura no banho, houve uma redução do tempo para adsorção até o equilíbrio e a quantidade de adsorvente empregado também contribuiu para a adsorção ser mais rápida.
- 31 March 2022
- Published by Brazilian Journals in Brazilian Journal of Development
- Vol. 8 (4) , 24848-24866
Utilização de resíduo da indústria Bunge, com e sem tratamento prévio, como adsorvente de corantes ácidos / Use of waste from the Bunge industry, with and without prior treatment, as adsorbent of acid dyes
O efluente das indústrias têxteis é um motivo de grande preocupação, pois é necessário atender os critérios de legislação, como o CONAMA e leis municipais para o seu devido tratamento. Descartes indevidos podem ocorrer, mesmo com as legislações existentes, pois os procedimentos e os materiais empregados são considerados onerosos para alguns. Foi pensado em uma alternativa mais barata para o tratamento de efluentes têxteis, que consiste no aproveitamento de um resíduo argiloso de clarificação de óleo vegetal (RC) gerado pela empresa Bunge, como adsorvente para dois corantes ácidos, o amarelo e azul Colorcid, comumente empregados nos tingimentos de fibras de poliamida. O processo para remoção dos corantes foi através da adsorção, empregando RC em soluções aquosas dos corantes têxteis. Os tratamentos foram realizados em um banho termostatizado do tipo Dubnoff sob agitação constante de 130 rpm em diferentes temperaturas (25, 30, 40 e 50°C), e quantidades de adsorvente (0,5 g, 0,75 g e 1 g). Os experimentos foram monitorados por meio do espectrofotômetro de UV-visível Shimadzu 1800 para a determinação da eficiência dos adsorventes na remoção do corante. Os resultados obtidos foram satisfatórios, apresentaram eficiências entre 84% - 100% para a adsorção dos corantes estudados. Todos os adsorventes obtiveram valores similares de eficiência, mas o adsorvente calcinado demonstrou uma solução mais limpa no final que os demais. Com o aumento da temperatura no banho, houve uma redução do tempo para adsorção até o equilíbrio e a quantidade de adsorvente empregado também contribuiu para a adsorção ser mais rápida.
- Open Access
- 28 September 2021
- Published by AMOGJ - Angolan Mineral, Oil & Gas Journal, SA in Angolan Industry and Chemical Engineering Journal
- Vol. 1 (1)
Effect of different filters on the extraction of norbixin from Bixa orellana for synthetic fiber dyeing and development of a post-dyeing process for removal of the unfixed dye
The aim of this study was to compare the efficiency of three types of filters for the extraction of the annatto dye from Bixa orellana for polyester dyeing. In addition, post-dyeing washing processes were proposed to improve the wash and rubbing fastness. In the extraction procedure the paper filter presented the highest yield (13.3%), followed by the polypropylene (11.4%), but there was no significant difference in the results for the exhaustion percentage (average of 87.4%) and K/S values (1.68 to 2.24). Results showed the polypropylene filter was the most suitable and can be reused. The post-dyeing washing processes with detergent improved the fastness increasing the color transfer score from 1.5 (large change) to 3 (small change). An acceptable color difference between the dyed fabric samples before and after washing was observed. Results indicate that the post-dyeing washing process improves the quality of dyed fabrics to levels acceptable for industrial application.
- 28 September 2021
- Published by AMOGJ - Angolan Mineral, Oil & Gas Journal, SA in Angolan Industry and Chemical Engineering Journal
- Vol. 1 (1)
Open AccessEffect of different filters on the extraction of norbixin from Bixa orellana for synthetic fiber dyeing and development of a post-dyeing process for removal of the unfixed dye
The aim of this study was to compare the efficiency of three types of filters for the extraction of the annatto dye from Bixa orellana for polyester dyeing. In addition, post-dyeing washing processes were proposed to improve the wash and rubbing fastness. In the extraction procedure the paper filter presented the highest yield (13.3%), followed by the polypropylene (11.4%), but there was no significant difference in the results for the exhaustion percentage (average of 87.4%) and K/S values (1.68 to 2.24). Results showed the polypropylene filter was the most suitable and can be reused. The post-dyeing washing processes with detergent improved the fastness increasing the color transfer score from 1.5 (large change) to 3 (small change). An acceptable color difference between the dyed fabric samples before and after washing was observed. Results indicate that the post-dyeing washing process improves the quality of dyed fabrics to levels acceptable for industrial application.
- Open Access
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 24 (3)
Estudo comparativo do tingimento de malha PES/CO com água tratada com resíduo de clarificação de óleo vegetal, na forma natural e calcinada
RESUMO A indústria têxtil utiliza um grande volume de água, o que torna necessário encontrar opções mais sustentáveis para o seu uso, como a reutilização em novos tingimentos. O uso de um resíduo industrial sólido, como adsorvente, poderá ser uma alternativa para tratar o efluente têxtil. Este estudo teve como objetivo testar a viabilidade do reuso de solução de corante disperso, tratada com resíduo da clarificação de óleo vegetal como adsorvente alternativo, no tingimento de malha poliéster/algodão (PES/CO 50/50). Utilizou-se dois tipos de pré-tratamento no adsorvente, natural (RC) seco a 70°C por 24h e calcinado (RCc) a 600°C por 2h 30min. Realizou-se o tingimento na cor clara com a solução tratada nas concentrações 100%, 75% e 50% (v/v), o padrão foi tinto com água da indústria têxtil. Para análise da eficiência do tratamento utilizou-se espectrofotometria UV-Vis, e a avaliação dos tecidos tintos pelos parâmetros tintoriais: esgotamento (%) por espectrofotometria UV-Vis; K/S, força relativa (FR%) e DE por espectrofotometria de remissão, como também ensaios de solidez a fricção e a lavagem. A eficiência do tratamento foi de 91,26% para o resíduo RC, e 95,38% para o RCc. Os valores de esgotamento variaram entre 80% e 92% para PES e 70% e 85% para CO. O DE variou entre 0,22 e 1,2, sendo que a maioria dos valores estão dentro da faixa aceita pela indústria (DE ≤1,0). Não houve grande variação para os valores de K/S e a FR (%), tendo a maior variação de 0,09 unidades para o K/S e 7,2% para a FR (%). Os testes de solidez apresentaram notas entre 4/5 e 5 nas escalas de cinza, indicando que não há a migração do corante. A proposta do tratamento e reutilização da solução em novos tingimentos mostrou-se uma alternativa viável, quando comparado ao tingimento padrão.
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 24 (3)
Open AccessEstudo comparativo do tingimento de malha PES/CO com água tratada com resíduo de clarificação de óleo vegetal, na forma natural e calcinada
RESUMO A indústria têxtil utiliza um grande volume de água, o que torna necessário encontrar opções mais sustentáveis para o seu uso, como a reutilização em novos tingimentos. O uso de um resíduo industrial sólido, como adsorvente, poderá ser uma alternativa para tratar o efluente têxtil. Este estudo teve como objetivo testar a viabilidade do reuso de solução de corante disperso, tratada com resíduo da clarificação de óleo vegetal como adsorvente alternativo, no tingimento de malha poliéster/algodão (PES/CO 50/50). Utilizou-se dois tipos de pré-tratamento no adsorvente, natural (RC) seco a 70°C por 24h e calcinado (RCc) a 600°C por 2h 30min. Realizou-se o tingimento na cor clara com a solução tratada nas concentrações 100%, 75% e 50% (v/v), o padrão foi tinto com água da indústria têxtil. Para análise da eficiência do tratamento utilizou-se espectrofotometria UV-Vis, e a avaliação dos tecidos tintos pelos parâmetros tintoriais: esgotamento (%) por espectrofotometria UV-Vis; K/S, força relativa (FR%) e DE por espectrofotometria de remissão, como também ensaios de solidez a fricção e a lavagem. A eficiência do tratamento foi de 91,26% para o resíduo RC, e 95,38% para o RCc. Os valores de esgotamento variaram entre 80% e 92% para PES e 70% e 85% para CO. O DE variou entre 0,22 e 1,2, sendo que a maioria dos valores estão dentro da faixa aceita pela indústria (DE ≤1,0). Não houve grande variação para os valores de K/S e a FR (%), tendo a maior variação de 0,09 unidades para o K/S e 7,2% para a FR (%). Os testes de solidez apresentaram notas entre 4/5 e 5 nas escalas de cinza, indicando que não há a migração do corante. A proposta do tratamento e reutilização da solução em novos tingimentos mostrou-se uma alternativa viável, quando comparado ao tingimento padrão.
- 8 November 2018
- Published by Wiley in Coloration Technology
- Vol. 135 (2) , 90-96
The colour properties of polyester/cotton knitted fabrics coated with poly(N‐vinyl‐2‐pyrrolidone)
The objective of this research was to investigate the use of crosslinked poly(N‐vinyl‐2‐pyrrolidone) (PVP) to coat polyester/cotton knitted fabric, without adversely affecting its dyeing properties. Before dyeing, the knitted fabrics were tested for bursting strength to assess the influence of the coating on their resistance. The dyeing parameters were evaluated as the exhaustion (%), K/S value, colour difference (ΔE), relative strength (RS %) and colour fastness to washing. Bursting strengths were 9.4 for coated and 9.7 kgf cm−2 for uncoated knitted fabric samples, confirming an insignificant loss in resistance. In the evaluation of K/S, ΔE and RS%, the values for the samples with the highest concentration of PVP were the most different to those for the standard sample. The colour fastness showed satisfactory results indicating that neutralisation and washing after dyeing were effective. These results could lead to increased quality in the textile industry, adding value to products.
- 8 November 2018
- Published by Wiley in Coloration Technology
- Vol. 135 (2) , 90-96
The colour properties of polyester/cotton knitted fabrics coated with poly(N‐vinyl‐2‐pyrrolidone)
The objective of this research was to investigate the use of crosslinked poly(N‐vinyl‐2‐pyrrolidone) (PVP) to coat polyester/cotton knitted fabric, without adversely affecting its dyeing properties. Before dyeing, the knitted fabrics were tested for bursting strength to assess the influence of the coating on their resistance. The dyeing parameters were evaluated as the exhaustion (%), K/S value, colour difference (ΔE), relative strength (RS %) and colour fastness to washing. Bursting strengths were 9.4 for coated and 9.7 kgf cm−2 for uncoated knitted fabric samples, confirming an insignificant loss in resistance. In the evaluation of K/S, ΔE and RS%, the values for the samples with the highest concentration of PVP were the most different to those for the standard sample. The colour fastness showed satisfactory results indicating that neutralisation and washing after dyeing were effective. These results could lead to increased quality in the textile industry, adding value to products.
- Open Access
- 1 January 2017
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 22 (1)
Pre-alvejamento de materiais têxteis com ozônio e avaliação de suas propriedades de superfície, físicas e tintoriais
A inovação dos processos de beneficiamento de materiais têxteis é cada vez mais importante para possibilitar a redução no consumo de água e nos tempos de processo na indústria têxtil. O consumo de fibras têxteis no Brasil em 2014 foi de 13,3 kg por habitante, e para beneficiar estes tecidos são utilizados em média 80 litros de água para cada quilograma de substrato tratado. Este estudo visou aprimorar o processo de pré-alvejamento para tecidos têxteis utilizando o ozônio com o objetivo de reduzir o consumo de água, de aditivos químicos, de tempo e bem como de energia. O potencial de redução do ozônio (2,07 V) é maior que o potencial de redução do peróxido de hidrogênio (1,77 V), o que faz com que o ozônio seja um excelente agente oxidante. A avaliação dos resultados de resistência física (estouro e tração), propriedades tintoriais (K/S, FC % e DE) e do grau de branco do tecido, indicam que o processo de pré-alvejamento com ozônio a frio é promissor na indústria têxtil, pois além de eliminar a utilização de peróxido de hidrogênio e hidróxido de sódio, reduz o tempo de processo em 60% e diminui o consumo de água em 50%.
- 1 January 2017
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 22 (1)
Open AccessPre-alvejamento de materiais têxteis com ozônio e avaliação de suas propriedades de superfície, físicas e tintoriais
A inovação dos processos de beneficiamento de materiais têxteis é cada vez mais importante para possibilitar a redução no consumo de água e nos tempos de processo na indústria têxtil. O consumo de fibras têxteis no Brasil em 2014 foi de 13,3 kg por habitante, e para beneficiar estes tecidos são utilizados em média 80 litros de água para cada quilograma de substrato tratado. Este estudo visou aprimorar o processo de pré-alvejamento para tecidos têxteis utilizando o ozônio com o objetivo de reduzir o consumo de água, de aditivos químicos, de tempo e bem como de energia. O potencial de redução do ozônio (2,07 V) é maior que o potencial de redução do peróxido de hidrogênio (1,77 V), o que faz com que o ozônio seja um excelente agente oxidante. A avaliação dos resultados de resistência física (estouro e tração), propriedades tintoriais (K/S, FC % e DE) e do grau de branco do tecido, indicam que o processo de pré-alvejamento com ozônio a frio é promissor na indústria têxtil, pois além de eliminar a utilização de peróxido de hidrogênio e hidróxido de sódio, reduz o tempo de processo em 60% e diminui o consumo de água em 50%.
- Open Access
- 1 December 2014
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 24 (6) , 640-645
Evaluation of the influence of the use of waste from the processing of rice in physicochemical properties and biodegradability of PHB in composites
The high calorific value of rice husks has elevated its reuse as an energy source; however, the burning of these shells generates a waste ash from rice husk ash (RHA), which makes its disposal a concern. Despite advances, biodegradable polymers are not yet able to compete with those of traditional thermoplastics, which have lower production cost and higher performance. Based on this background, this paper studies the feasibility of reuse of RHA as filler in polymer matrices replacing the conventional filler. This study consists of applying different percentages of RHA in the formulation of polyhydroxybutyrate composite (PHB) and the use of talc (TA) for comparison purposes as conventional filler. The composites used in this assay were obtained by twin-screw extrusion and injection molding of the polymer plus the fillers under study. Physicochemical and biodegradability properties of the composites were evaluated. The composite PHB/RHA was superior in the biodegradability tests and the properties remain practically unchanged in the presence of the filler. Thus, composites with RHA are promising because they take an abundant residue combined with degradation capacity of the polymer, therefore reducing cost and the environmental impact
- 1 December 2014
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 24 (6) , 640-645
Open AccessEvaluation of the influence of the use of waste from the processing of rice in physicochemical properties and biodegradability of PHB in composites
The high calorific value of rice husks has elevated its reuse as an energy source; however, the burning of these shells generates a waste ash from rice husk ash (RHA), which makes its disposal a concern. Despite advances, biodegradable polymers are not yet able to compete with those of traditional thermoplastics, which have lower production cost and higher performance. Based on this background, this paper studies the feasibility of reuse of RHA as filler in polymer matrices replacing the conventional filler. This study consists of applying different percentages of RHA in the formulation of polyhydroxybutyrate composite (PHB) and the use of talc (TA) for comparison purposes as conventional filler. The composites used in this assay were obtained by twin-screw extrusion and injection molding of the polymer plus the fillers under study. Physicochemical and biodegradability properties of the composites were evaluated. The composite PHB/RHA was superior in the biodegradability tests and the properties remain practically unchanged in the presence of the filler. Thus, composites with RHA are promising because they take an abundant residue combined with degradation capacity of the polymer, therefore reducing cost and the environmental impact
- Open Access
- 23 January 2012
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Technology
- Vol. 34 (1) , 97-103-103
Treatment of acidic dyes solutions by adsorption in soybean meal
Treatment of acidic dyes solutions by adsorption in soybean meal - doi: 10.4025/actascitechnol.v34i1.10434
- 23 January 2012
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Technology
- Vol. 34 (1) , 97-103-103
Open AccessTreatment of acidic dyes solutions by adsorption in soybean meal
Treatment of acidic dyes solutions by adsorption in soybean meal - doi: 10.4025/actascitechnol.v34i1.10434