DBDavid Betaille

David Betaille

*This is an algorithmically generated author record based on publicly available information.

David Betaille has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Vision-Enhanced Low-Cost Localization in Crowdsourced Maps

    by Benedict Flade, Julian Eggert, Axel Koppert, Gorka Velez, Oihana Otaegui, Anweshan Das, Gijs Dubbelman, David Betaille

    The lane-level localization of vehicles with low-cost sensors is a challenging task. In situations in which Global Navigation Satellite Systems (GNSSs) suffer from weak observation geometry or from the influence of reflected signals, the fusion of heterogeneous information presents a suitable approach for improving the localization accuracy. We propose a solution based on a monocular front-facing camera, a low-cost inertial measurement unit (IMU), and a single-frequency GNSS receiver. The sensor data fusion is implemented as a tightly coupled Kalman filter that corrects the IMU-based trajectory with GNSS observations while employing European Geostationary Overlay Service correction data. Further, we consider vision-based complementary data that serve as an additional source of information. In contrast to other approaches, the camera is not used to infer the motion of the vehicle, but rather for directly correcting the localization results under the usage of map information. More specifically, the so-called camera-to-map alignment is done by comparing virtual 3D views (candidates) created from projected map data with lane geometry features that are extracted from the camera image. One strength of the proposed solution is its compatibility with state-of-the-art map data, which are publicly available from different sources. We validate the approach on real-world data recorded in The Netherlands and show that it presents a promising and cost-efficient means to support future advanced driver assistance systems.


  • Top Cited Papers
    Open Access

    GNSS Position Integrity in Urban Environments: A Review of Literature

    by Ni Zhu, Juliette Marais, David Betaille, Marion Berbineau

    Integrity is one criteria to evaluate GNSS performance, which was first introduced in the aviation field. It is a measure of trust which can be placed in the correctness of the information supplied by the total system. In recent years, many GNSS-based applications emerge in the urban environment including liability critical ones, so the concept of integrity attracts more and more attention from urban GNSS users. However, the algorithms developed for the aerospace domain cannot be introduced directly to the GNSS land applications. This is because a high data redundancy exists in the aviation domain and the hypothesis that only one failure occurs at a time is made, which is not the case for the urban users. The main objective of this paper is to provide an overview of the past and current literature discussing the GNSS integrity for urban transport applications so as to point out possible challenges faced by GNSS receivers in such scenario. Key differences between integrity monitoring scheme in aviation domain and urban transport field are addressed. And this paper also points out several open research issues in this field.


  • Open Access

    Pedestrian Dead Reckoning Navigation with the Help of A⁎-Based Routing Graphs in Large Unconstrained Spaces

    by F. Taia Alaoui, David Betaille, Valerie Renaudin

    An A⁎-based routing graph is proposed to assist PDR indoor and outdoor navigation with handheld devices. Measurements are provided by inertial and magnetic sensors together with a GNSS receiver. The novelty of this work lies in providing a realistic motion support that mitigates the absence of obstacles and enables the calibration of the PDR model even in large spaces where GNSS signal is unavailable. This motion support is exploited for both predicting positions and updating them using a particle filter. The navigation network is used to correct for the gyro drift, to adjust the step length model and to assess heading misalignment between the pedestrian’s walking direction and the pointing direction of the handheld device. Several datasets have been tested and results show that the proposed model ensures a seamless transition between outdoor and indoor environments and improves the positioning accuracy. The drift is almost cancelled thanks to heading correction in contrast with a drift of 8% for the nonaided PDR approach. The mean error of filtered positions ranges from 3 to 5 m.


  • Improving Accuracy and Integrity with a Probabilistic Urban Trench Modeling

    by D. Bétaille, F. Peyret, M. Ortiz, S. Miquel, F. Godan

    GNSS localization in an urban environment remains a key issue that must be solved in order to enable innovative driver assistance systems or cooperative applications. This key issue exists not only in terms of accuracy but also in terms of integrity. Actually, one aims at reducing as much as possible the error mainly due to multipath on buildings and provide in the mean time a certain guarantee on the user position exactness. This article shows how a simple geometric modeling, named ‘Urban Trench’, of the city environment can improve significantly the positioning accuracy. Authors also propose an algorithm for computing an urban trench protection level, with a much higher reliability compared to conventional protection level whose open sky assumption is violated. Experimental results are given in the cities of Nantes, Paris, and Toulouse, France. Copyright © 2016 Institute of Navigation


  • Applying Standard Digital Map Data in Map-aided, Lane-level GNSS Location

    by David Bétaille, François Peyret, Ifsttar, Maxime Voyer

    Urban positioning using the Global Positioning System (GPS) is challenging because of multipath. Urban canyons limit open sky visibility, and cause signal reflection and diffraction, resulting in significant satellite range measurement errors. The investigations reported here have been carried out in a French project calledInturb(an acronym derived from integrity and urban positioning). So far, the project has had two phases: first, a simple Three-Dimensional (3D) geometrical city modelling, called “Urban Trench”, has been developed and engineered manually from data sets collected in different cities. Positioning improvement in terms of accuracy was quantified where the model could be applied. Second, this modelling has been automated, based on the standard national BD Topo ® map database for France, with promising results. This geometrical modelling makes it possible to distinguish between line-of-sight satellite signals and those from non-line-of-sight. The latter, apparentlybona fide, signals are caused by strong reflections, usually from buildings with a lot of steel and glass in their construction. A correction of the pseudo-range measurements of the latter is also computed and applied in the position estimator. Positioning accuracy is improved, whilst availability is kept at its maximum. In the study both manual and automatic 3D models are used in extensive experimental campaigns. Results are: first, the possibility to cover entirely any urban area in the country; second, the reduction of the median error in 3D by more than 50% on data collected in Nantes, Paris and Toulouse for a total duration of nearly ten hours; third, the compliance with standards used in most embedded maps and geographical information systems, including an assessment of the trade-off between the model simplicity and the positioning improvement.


  • Open Access

    About Non-Line-Of-Sight Satellite Detection and Exclusion in a 3D Map-Aided Localization Algorithm

    by Sébastien Peyraud, David Bétaille, Stéphane Renault, Miguel Ortiz, Florian Mougel, Dominique Meizel, François Peyret

    Reliable GPS positioning in city environment is a key issue: actually, signals are prone to multipath, with poor satellite geometry in many streets. Using a 3D urban model to forecast satellite visibility in urban contexts in order to improve GPS localization is the main topic of the present article. A virtual image processing that detects and eliminates possible faulty measurements is the core of this method. This image is generated using the position estimated a priori by the navigation process itself, under road constraints. This position is then updated by measurements to line-of-sight satellites only. This closed-loop real-time processing has shown very first promising full-scale test results.


  • Open Access

    Unscented Kalman filter for urban link travel time estimation with mid-link sinks and sources

    by R.-M. Hage, D. Betaille, F. Peyret, D. Meizel, J.-C. Smal

    To estimate link travel time, the classical analytical procedure uses vehicles counts at upstream and downstream locations. This procedure is vulnerable in urban networks mainly due to significant flow to and from mid-link sinks and sources. One of the important developments recently done on this topic has yielded to the CUPRITE methodology. This method is derived from the classical analytical procedure. It integrates probe vehicle data to correct deterministically the upstream cumulative plot to match the information of probe vehicles travel times, whilst the downstream cumulative plot is kept unchanged. The algorithm proposed and validated in this research estimates urban links travel times based on an unscented Kalman filter (UKF). This algorithm integrates stochastically the vehicle count data from underground loop detectors at the end of every link and the travel time from probe vehicles. The proposed methodology, which can be used for travel time estimation in real-time, is compared to the classical analytical procedure and to the CUPRITE method in case of mid-link perturbation. Along to its lower sensitivity than CUPRITE, the UKF algorithm makes it possible detection and exclusion of outliers from both data sources.