GJGuiping Jin

Guiping Jin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Guiping Jin has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Millimeter-Wave Wideband Wide-Angle Scanning Phased Array Based on Collinear Slots for Low Cross Polarization

    by Sha Xu, Yisen He, Dujiao Lu, Guiping Jin

    This letter presents a wide-angle scanning phased array featuring cross-polarization suppression below -20 dB, for 5G millimeter-wave applications over 24.25−29.5 GHz. The array element employs a ridged substrate integrated waveguide (RSIW) with a periodically bending ridge to redirect the current distribution and excite collinear slots along the centerline. A hybrid beam-widening technique is introduced. This technique combines substrate sidewall trenches and metallic via walls to achieve a stable simulated E-plane half-power beamwidth (HPBW) exceeding 120°. The assembled 1×4 array is fed by a folded microstrip network with probe-coupled transitions, ensuring balanced power distribution and compact footprint. The assembled array demonstrates a simulated peak realized gain of 13.85 dBi, and measurements confirm a scanning range exceeding ±50° across the full band. The compact element spacing of 0.35λ° ensures grating-lobe-free operation over the entire scan range. Implemented with a thin 0.14λ° profile, this design offers a compelling solution for cost-effective and highly integrated 5G systems.

  • Motion Parameter and Stability Estimation of Rotating Object Based on Orbital Angular Momentum

    by Bowen He, Guiping Jin, Yuehui Cui, Kun Tang

    In a complex low-altitude environment, the safe takeoff and landing of uncrewed aerial vehicles (UAVs) involve the estimation of motion parameters and stability. However, during these phases, the orbital angular momentum (OAM)-induced Doppler shifts include angular and radial velocities, which makes it difficult to decouple and estimate each parameter. In this letter, a method is proposed to effectively separate and estimate the angular and radial velocities by introducing a dual-dimensional dictionary and a correlation-based dynamic step size optimization. Then, using the scattering coefficient achieved by a threshold iterative optimization and calculating its entropy, the motion stability is assessed. Simulation results illustrate that the estimated values match closely with the reference values, with relative errors for angular and radial velocities of 0.17% and 0.25%, respectively. The motion stability is supported by the low entropy value, which is consistent with the assumed scenario. The proposed method achieves higher accuracy in motion parameter estimation than other schemes and includes stability estimation.

  • Dual-Band Coradiator Antenna With Large Frequency Ratio for Satellite and Millimeter-Wave Communications

    by Shi-Hao Zeng, Zhi-Hong Tu, Gui-Ping Jin

    This paper proposed a large frequency-ratio co-radiator antenna that operates in both the microwave band with circular polarization and millimeter-wave bands with dual polarization and beam scanning capability. First, a millimeter-wave subarrays is formed by arranging four 1×7 cascaded triangular cavities in a mirrored configuration and connecting them at the positions where the edge electric field is minimal. This subarray also resonates within the microwave band, acting as an equivalent of a shorted quarter-wavelength patch antenna. Then, by translating and mirroring this subarray, a single-polarization 8×7 millimeter-wave array is formed. Next, a dual-polarized millimeter-wave array is achieved by rotating and replicating the 8×7 array by 90o. Finally, a microwave circular-polarized antenna is obtained by incorporating a rotated sequential microwave feed network. In addition, a fork-finger high-pass filter (HPF) is loaded in each millimeter-wave feed line to improve the isolation performance. The measured results show that RHCP is achieved at 1.561 GHz for the BeiDou system, and that the millimeter-wave arrays also provide a beam scanning performance of ±38° and ±37° for vertical and horizontal polarization, respectively, at 25.5 GHz of the 5G n258 band.


  • Highly Efficient Transcranial Magnetic Stimulation Coil Based on Artificial Magnetic Conductor and Mu-Negative Metamaterial

    by Hai-Jie Li, Zhi-Hong Tu, Gui-Ping Jin

    This letter demonstrates an innovative method to enhance the efficiency of conventional transcranial magnetic stimulation (TMS) coils. This method utilizes the in-phase reflection property of artificial magnetic conductor (AMC) and the evanescent wave amplification property of mu-negative (MNG) metamaterial to optimize the spatial magnetic field distribution surrounding the TMS coil, which leads to the improvement in coil efficiency. According to this method, the designed AMC and MNG are added to a conventional figure-8 coil, resulting in a nearly 5.9 times increase in stimulation intensity compared to the original coil. This significant increase in stimulus intensity, achieved without modifying the hardware driving circuit and coil structure, indicates a remarkable improvement in coil efficiency. Additionally, compared to the original figure-8 coil, the addition of AMC and MNG demonstrates a 24.9% improvement in focality, with only a 11.9% reduction in penetration depth. These enhancements suggest that the proposed method has the potential to promote the further development of TMS equipment and possesses the potential for widespread application. Lastly, simulation and experimental results are provided to validate the feasibility and advantages of this method.

  • Wideband High‐Gain Low‐Profile Millimeter‐Wave Circularly Polarized End‐Fire Antenna Based on Magnetic Dipole Directors

    by Sha Xu, Ju Yang, Shaowei Liao, Guiping Jin

    This letter proposes a wideband, high‐gain, low‐profile circularly polarized end‐fire antenna for 5G millimeter‐wave applications. The antenna consists of a substrate integrated waveguide (SIW) circularly polarized feeder, dual‐polarized directors, and coplanar waveguide (CPW)‐SIW transitions, with a low‐profile height of 0.14 λ 0 . The circularly polarized feeder exhibits wide bandwidth and reliable end‐fire radiation, while the dual‐polarized magnetic dipole directors enhance the end‐fire gain. Based on the feeder and magnetic dipole directors, a circularly polarized antenna is designed and fabricated. The −10 dB impedance bandwidth reaches 29.48%, with a peak gain of 11.14 dBic, demonstrating good impedance matching and high gain within the 5G millimeter‐wave band. Furthermore, the entire structure of the proposed antenna can be conveniently implemented using a single‐layer PCB substrate, achieving the desired low‐profile height.

  • Open Access

    Multi-Dimensional Motion Parameter Estimation of a Rotating Object Based on Orbital Angular Momentum

    by Bowen He, Kun Tang, Guiping Jin, Yuehui Cui

    This paper considers the multi-dimensional motion patterns of a rotating object and presents methods to estimate its motion parameters, including the rotational direction, angular velocity, motion trajectory, and inclination angle, using orbital angular momentum. Firstly, the rotational direction and the angular velocity are analyzed and estimated from the aspects of time domain and frequency domain, respectively. In the time domain, the rotational direction is inferred by analyzing phase variations based on the angular momentum theorem. Then, an iterative phase retrieval algorithm is introduced to obtain the angular velocity. In the frequency domain, a dynamic sparse step-size matching algorithm is developed to determine the rotational direction and the angular velocity simultaneously. Secondly, an analytical equation for the electric field is derived to determine the translational motion, facilitating analysis of the motion trajectory. Moreover, an objective function that incorporates polarizations, reflection coefficients, and inclination angle is established. A weighted iterative gradient algorithm is then applied to solve this function, ultimately obtaining the inclination angle. The results demonstrate that the estimated values agree well with the theoretical values. Both the rotational direction and the angular velocity are accurately estimated. The translational motion exhibits an error of 6.33%, while the error in the inclination angle is 2.6%. These findings indicate that the proposed methods offer reliable approaches for evaluating the multi-dimensional motion parameters of a rotating object. The methods also show potential for engineering applications, such as drone-based surveillance and industrial instrument monitoring involving rotating components.

  • Millimeter-Wave Wide-Angle Scanning Phased Array Antenna Based on Heterogeneous Beam Elements

    by Guiping Jin, Yi Sun, Shaowei Liao, Quan Xue

    By imitating the element inclined beam distribution of a curved surface conformal (CSC) phased array antenna (PAA), a pseudo-curved surface conformal (PCSC) PAA realizes wide-angle scanning while maintaining a planar low profile. Inspired by the PCSC PAA, this communication proposes a PAA based on heterogeneous beam elements (HBEs) to realize wide-angle scanning. Using HBEs introduces a new design degree of freedom (DoFs), namely the element beam shape, to PAA. By optimizing HBEs and their arrangement, the effective aperture of a PAA can be increased at large scanning angles, and thus the scanning range can be improved. To verify the idea, first, a wide-beam 1×4-element subarray is developed. Then, a standard 4×4-element PAA is implemented using four uniform 1×4-element subarrays, achieving a >±60° 3-dB gain variation scanning range. At last, based on the standard PAA, by adjusting its structure to tailor four subarrays’ beam inclinations, a 4×4-element HBE PAA is designed. It further improves the scanning range to >±70° at an average cost of ~1.5dBi broadside scanning gain within the 5G mmWave band (24.25-29.5GHz, 19.5%). To the authors’ best knowledge, compared with the former planar mmWave PAAs, the proposed design shows the widest scanning range in a wide bandwidth.


  • Wideband High-Gain Low-Profile Endfire Linearly/Circularly Polarized Antennas Based on Magnetic Dipole Directors for Millimeter-Wave Applications

    by Sha Xu, Guiping Jin, Ju Yang, Shaowei Liao

    wideband high-gain low-profile end-fire linearly polarized (LP) / circularly polarized (CP) antennas for 5G millimeter-wave applications are presented in this letter. The basic structure of the antennas include a stripline fed horn as the feeder and multiple magnetic diploe directors (MDDs) printed on a single layer substrate. The stripline fed horn exhibits a wide bandwidth and stable end-fire radiation, and magnetic dipole directors help further improvement the end-fire gain. A linearly polarized (LP) antenna based on a LP feeder and vertically polarized (VP) MDDs (supporting VP resonance) working at the 5G mmWave band is firstly designed. Then, on this basis, a circularly polarized (CP) antenna based on a CP feeder and dual-polarized MDDs (supporting two orthogonal polarized resonances) working at the same band is designed. The two proposed antennas with the low profile of 0.14 $\lambda_{0}$ are fabricated and measured, both of which show good impedance matching, high gain, and low cross-polarization within the 5G mmWave band.


  • 4G/5G antenna with small clearance for metal frame smartphone applications

    by Guiping Jin, Wei Wang, Yi Sun, Dujiao Lu, Shaowei Liao

    An 4G/5G antenna with small clearance for metal frame smartphone applications is proposed. The proposed antenna consists of metal frame, inverted‐T feeding lines, S‐shaped branch, and the system ground on which U‐shaped slot is etched. The metal frame is broken and there is a 2 mm open slit on the metal frame. There is a 2 mm gap between the metal frame and the substrate. The ground clearance of the proposed antenna is 34.5 × 5.5 mm. Inverted‐T feeding lines are connected to the metal rim. Using the multiple radiation patterns of S‐shaped branches and the coupling ring mode of S‐shaped branch and ground‐extending metal frames, the measured −6 dB impedance bandwidth are 1680 to 2820 MHz and 2870 to 5500 MHz bands, which can fully cover DCS1800, PCS1900, UMTS2100, LTE2400, 2600 (1710 to 2690 MHz), and 5G N77/N78/N79 (3300‐4200 MHz, 4400‐5000 MHz) bands. The measured efficiency is greater than 43% in desired bands. The proposed antenna has the advantages of small ground clearance, wide bandwidth, and no lumped elements.

  • A wideband polarization reconfigurable antenna based on optical switches and C‐shaped radiator

    by Guiping Jin, Long Li, Wei Wang, Shaowei Liao

    A wideband polarization reconfigurable antenna based on optical switches and a C‐shaped radiator is proposed. The antenna can achieve three polarization modes, linear polarization (LP), left‐hand circular polarization (LHCP), and right‐hand circular polarization (RHCP). The proposed antenna consists of a simple C‐shaped patch, a modified ground plane, a feeding unit, and two parasitic stubs. Four slots are embedded in the C‐shaped patch properly to adjust the axial ratio (AR) performance for CP modes. And two silicon optical switches are inserted into each brand of the feeding unit. The measured results show that the proposed antenna has a 10‐dB impedance bandwidth of 86.8% (1.82‐4.61GHz) in LP mode, 81.8% (1.3‐3.1 GHz) and 14.1% (3.3‐3.81 GHz) for LHCP mode, and 81.8% (1.3‐3.1 GHz) and 19.2% (3.3‐4 GHz) for RHCP mode. The 3‐dB AR bandwidth is about 49.1% (2.38‐3.93 GHz) for LHCP and 51.4% (2.33‐3.94 GHz) for RHCP. The simulated and measured results show a pretty good agreement. Furthermore, in the range of operating bandwidth from 2.38 to 3.81 GHz, the proposed antenna can satisfy the 2.45 GHz WiFi, LTE 4G, and sub‐6 GHz 5G applications.