Yasushi Nishihara
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yasushi Nishihara has a total of 140 co-authors. Here are the top co-authors by number of shared publications:
Hiroki Mori
Research Institute for Interdisciplinary Science, Okayama University Okayama Japan
25 shared publicationsKiyohiko Nakajima
Department of Chemistry , Aichi University of Education , Igaya, Kariya , Aichi 448-8542 , Japan
13 shared publications- Masayuki Iwasaki
Research Institute for Interdisciplinary Science, Okayama University , 3-1-1 Tsushimanaka, Kita-ku, Okayama 700-8530, Japan
13 shared publications Shuhei Nishinaga
Graduate School of Natural Science and Technology Okayama University 3‐1‐1, Tsushimanaka Kita‐ku Okayama 700–8530 Japan
12 shared publications- Hiroki Mori
Research Institute for Interdisciplinary Science, Okayama University, 3-1-1 Tsushimanaka, Kita-ku, Okayama 700-8530, Japan
9 shared publications Yasuhiro Okuda
Research Institute for Interdisciplinary Science, Okayama University, 3-1-1 Tsushimanaka, Okayama 700-8530, Japan
9 shared publications
Latest Publications
- 1 June 2026
- Published by Georg Thieme Verlag KG in Synthesis
- Vol. 58 (20) , 2333-2341
Carbon–Fluorine Bond Formation via Decarboxylation of Carboxylic Acids
Decarboxylative fluorination of carboxylic acid derivatives has emerged as a powerful strategy for the synthesis of organofluorine compounds, particularly aryl fluorides and alkyl fluorides, which are widely utilized in pharmaceuticals, agrochemicals, and functional materials. These transformations can be achieved through a variety of approaches, including photoredox-catalyzed, transition-metal-mediated, and thermally induced processes. This short review summarizes recent advances in decarboxylative fluorination reactions, highlighting representative synthetic methods, characteristic substrate scope, and mechanistic features underlying these transformations.
- 1 June 2026
- Published by Georg Thieme Verlag KG in Synthesis
- Vol. 58 (20) , 2333-2341
Carbon–Fluorine Bond Formation via Decarboxylation of Carboxylic Acids
Decarboxylative fluorination of carboxylic acid derivatives has emerged as a powerful strategy for the synthesis of organofluorine compounds, particularly aryl fluorides and alkyl fluorides, which are widely utilized in pharmaceuticals, agrochemicals, and functional materials. These transformations can be achieved through a variety of approaches, including photoredox-catalyzed, transition-metal-mediated, and thermally induced processes. This short review summarizes recent advances in decarboxylative fluorination reactions, highlighting representative synthetic methods, characteristic substrate scope, and mechanistic features underlying these transformations.
- 27 April 2026
- Published by American Chemical Society (ACS) in Organic Letters
- Vol. 28 (18) , 5841-5846
Pd-Catalyzed Decarbonylative C–N Bond Formation Via Unimolecular Fragment Coupling of N -Acyl Phthalimides and Succinimides
Efficient strategies for C-N bond formation from readily available amide derivatives remain an important objective in synthetic chemistry. Herein, we report a Pd-catalyzed decarbonylative transformation of N-acyl phthalimides and acyl succinimides that enables the efficient synthesis of (hetero)aryl phthalimides and aryl succinimides with a broad substrate scope and high functional-group tolerance, including substrates bearing electron-donating substituents. Mechanistic studies support an intramolecular unimolecular fragment coupling pathway, and the resulting N-aryl phthalimides serve as versatile intermediates for the synthesis of aniline derivatives and other value-added molecules through late-stage functionalization.
- 27 April 2026
- Published by American Chemical Society (ACS) in Organic Letters
- Vol. 28 (18) , 5841-5846
Pd-Catalyzed Decarbonylative C–N Bond Formation Via Unimolecular Fragment Coupling of N -Acyl Phthalimides and Succinimides
Efficient strategies for C-N bond formation from readily available amide derivatives remain an important objective in synthetic chemistry. Herein, we report a Pd-catalyzed decarbonylative transformation of N-acyl phthalimides and acyl succinimides that enables the efficient synthesis of (hetero)aryl phthalimides and aryl succinimides with a broad substrate scope and high functional-group tolerance, including substrates bearing electron-donating substituents. Mechanistic studies support an intramolecular unimolecular fragment coupling pathway, and the resulting N-aryl phthalimides serve as versatile intermediates for the synthesis of aniline derivatives and other value-added molecules through late-stage functionalization.
- Open Access
- 30 June 2025
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 23 (32) , 7367-7382
From carboxylic acids or their derivatives to amines and ethers: modern decarboxylative approaches for sustainable C–N and C–O bond formation
Amines and ethers are fundamental structural motifs frequently found in pharmaceuticals and natural products. This review highlights recent advances in C–N and C–O bond-forming reactions via decarboxylation of carboxylic acids and their derivatives.
- 30 June 2025
- Published by Royal Society of Chemistry (RSC) in Organic & Biomolecular Chemistry
- Vol. 23 (32) , 7367-7382
Open AccessFrom carboxylic acids or their derivatives to amines and ethers: modern decarboxylative approaches for sustainable C–N and C–O bond formation
Amines and ethers are fundamental structural motifs frequently found in pharmaceuticals and natural products. This review highlights recent advances in C–N and C–O bond-forming reactions via decarboxylation of carboxylic acids and their derivatives.
- Open Access
- 23 June 2025
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 20 (18) , e00678
Alkoxy‐Substituted Anthrabis(Thiadiazole)‐Terthiophene Copolymers for Organic Photovoltaics: A Unique Wavy Backbone Enhances Aggregation, Molecular Order, and Device Efficiency
Two polymer donors, PATz3T‐o6BO and PATz3T‐o6HD , incorporating alkoxy‐substituted anthra[1,2‐ c :5,6‐ c ′]bis([1,2,5]thiadiazole), were strategically designed and synthesized. The unique wavy backbone of these polymers effectively reduced aggregation, leading to enhanced solubility and significantly improved molecular ordering. Consequently, the PATz3T‐o6HD : Y12 ‐based solar cells achieved a power conversion efficiency (PCE) of 7.94%. These findings provide valuable insights into the molecular design of high‐performance polymer donors for organic photovoltaics (OPVs).
- 23 June 2025
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 20 (18) , e00678
Open AccessAlkoxy‐Substituted Anthrabis(Thiadiazole)‐Terthiophene Copolymers for Organic Photovoltaics: A Unique Wavy Backbone Enhances Aggregation, Molecular Order, and Device Efficiency
Two polymer donors, PATz3T‐o6BO and PATz3T‐o6HD , incorporating alkoxy‐substituted anthra[1,2‐ c :5,6‐ c ′]bis([1,2,5]thiadiazole), were strategically designed and synthesized. The unique wavy backbone of these polymers effectively reduced aggregation, leading to enhanced solubility and significantly improved molecular ordering. Consequently, the PATz3T‐o6HD : Y12 ‐based solar cells achieved a power conversion efficiency (PCE) of 7.94%. These findings provide valuable insights into the molecular design of high‐performance polymer donors for organic photovoltaics (OPVs).
- Open Access
Palladium-Catalyzed Decarbonylative Nucleophilic Halogenation of Acid Anhydrides
In this study, we developed a palladium-catalyzed decarbonylative nucleophilic halogenation reaction using inexpensive and readily available acid anhydrides as substrates. This approach effectively circumvents the instability of acyl chlorides and the low reactivity of acyl fluorides. The Pd/Xantphos catalyst system exhibited excellent compatibility with the thermodynamically and kinetically challenging reductive elimination of C–X bonds (X = I, Br, and Cl) from Pd(II) intermediates. Notably, for electron-donating substrates, adopting an open system significantly improved the reaction efficiency. The positive effect of the open system may be due to the reversible nature of CO insertion and deinsertion, which helps direct the reaction toward the desired pathway by allowing the generated CO to exit the reaction system. Mechanistic studies suggest that the reaction proceeds through a highly reactive acyl halide intermediate, followed by a unimolecular fragment coupling (UFC) pathway via decarbonylation or an alternative pathway involving the formation of an activated anionic palladate complex in the presence of lithium halide.
Open AccessPalladium-Catalyzed Decarbonylative Nucleophilic Halogenation of Acid Anhydrides
In this study, we developed a palladium-catalyzed decarbonylative nucleophilic halogenation reaction using inexpensive and readily available acid anhydrides as substrates. This approach effectively circumvents the instability of acyl chlorides and the low reactivity of acyl fluorides. The Pd/Xantphos catalyst system exhibited excellent compatibility with the thermodynamically and kinetically challenging reductive elimination of C–X bonds (X = I, Br, and Cl) from Pd(II) intermediates. Notably, for electron-donating substrates, adopting an open system significantly improved the reaction efficiency. The positive effect of the open system may be due to the reversible nature of CO insertion and deinsertion, which helps direct the reaction toward the desired pathway by allowing the generated CO to exit the reaction system. Mechanistic studies suggest that the reaction proceeds through a highly reactive acyl halide intermediate, followed by a unimolecular fragment coupling (UFC) pathway via decarbonylation or an alternative pathway involving the formation of an activated anionic palladate complex in the presence of lithium halide.
- 30 November 2024
- Published by Wiley in Journal of Polymer Science
- Vol. 63 (3) , 688-698
Vinylene‐Bridged Alkoxyfluorobenzothiadiazole (FOBTzE)‐Based Semiconducting Polymers for Enhanced Performance in Non‐Fullerene Organic Photovoltaic Cells
To mitigate the strong aggregation and limited solubility observed in the previously reported vinylene‐bridged alkoxyfluorobenzothiadiazole (FOBTzE)‐based polymer, PFOE4T, we designed and synthesized PBFOE‐1. This novel semiconducting polymer, based on the FOBTzE framework, incorporates an alkylthienyl‐substituted benzodithiophene (BDT) as the donor unit. PBFOE‐1 demonstrated broad and intense absorption between 300 and 700 nm with a relatively wide bandgap of 1.7 eV. Additionally, PBFOE‐1 features a low HOMO energy level (−5.43 eV) compared to PFOE4T (−5.23 eV), likely due to the incorporation of weakly electron‐donating BDT into the polymer backbone. While the PFOE4T/Y12‐based solar cell yielded a modest power conversion efficiency (PCE) of 4.37%, characterized by a short‐circuit current density (J sc) of 13.5 mA cm−2, an open‐circuit voltage (V oc) of 0.69 V, and a fill factor (FF) of 0.47, the PBFOE‐1/Y12 cell exhibited a substantially higher PCE of 10.96%. This improvement is reflected in the enhanced J sc (23.23 mA cm−2), V oc (0.84 V), and FF (0.56). The superior performance of PBFOE‐1 is primarily attributed to its improved solubility and aggregation behavior, promoting a more ordered face‐on orientation and optimal blend morphology.
- 30 November 2024
- Published by Wiley in Journal of Polymer Science
- Vol. 63 (3) , 688-698
Vinylene‐Bridged Alkoxyfluorobenzothiadiazole (FOBTzE)‐Based Semiconducting Polymers for Enhanced Performance in Non‐Fullerene Organic Photovoltaic Cells
To mitigate the strong aggregation and limited solubility observed in the previously reported vinylene‐bridged alkoxyfluorobenzothiadiazole (FOBTzE)‐based polymer, PFOE4T, we designed and synthesized PBFOE‐1. This novel semiconducting polymer, based on the FOBTzE framework, incorporates an alkylthienyl‐substituted benzodithiophene (BDT) as the donor unit. PBFOE‐1 demonstrated broad and intense absorption between 300 and 700 nm with a relatively wide bandgap of 1.7 eV. Additionally, PBFOE‐1 features a low HOMO energy level (−5.43 eV) compared to PFOE4T (−5.23 eV), likely due to the incorporation of weakly electron‐donating BDT into the polymer backbone. While the PFOE4T/Y12‐based solar cell yielded a modest power conversion efficiency (PCE) of 4.37%, characterized by a short‐circuit current density (J sc) of 13.5 mA cm−2, an open‐circuit voltage (V oc) of 0.69 V, and a fill factor (FF) of 0.47, the PBFOE‐1/Y12 cell exhibited a substantially higher PCE of 10.96%. This improvement is reflected in the enhanced J sc (23.23 mA cm−2), V oc (0.84 V), and FF (0.56). The superior performance of PBFOE‐1 is primarily attributed to its improved solubility and aggregation behavior, promoting a more ordered face‐on orientation and optimal blend morphology.
- 20 September 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (22)
A Highly Efficient Cross‐Coupling Mode via the Release of Small Molecules: Transition Metal‐Catalyzed Unimolecular Fragment Coupling (UFC)
As a recently developed redox‐neutral coupling reaction, transition‐metal‐catalyzed unimolecular fragment coupling (UFC) has been extensively investigated over the past decade. In comparison to conventional cross‐coupling reactions, cross‐electrophilic coupling (XEC) and cross‐dehydrogenative coupling (CDC) protocols eliminate the need for stoichiometric organometallic reagents, reductants, or oxidants. Additionally, it produces only minimal molecular by‐products for the formation of a series of C−C bonds and C−X bonds with high atom efficiency. This review presents a summary and classification of the research progress made over the past decade in this field. The research is classified into four main categories, decarbonylation, decarboxylation, desulfonylation, and deisocyanation, according to the type of small molecule that is liberated from the reaction system. This facilitates the implementation of more practical, straightforward, and expedient reaction operations. It is noteworthy that the reaction employs carbonyl compounds (aldehydes, ketones, carboxylic acid derivatives, etc.), sulfones, and amides, which are typically inexpensive and accessible, as reaction substrates. This groundbreaking synthetic approach has since yielded a plethora of outcomes and novel research avenues in related fields, while also offering benefits to other related fields.
- 20 September 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (22)
A Highly Efficient Cross‐Coupling Mode via the Release of Small Molecules: Transition Metal‐Catalyzed Unimolecular Fragment Coupling (UFC)
As a recently developed redox‐neutral coupling reaction, transition‐metal‐catalyzed unimolecular fragment coupling (UFC) has been extensively investigated over the past decade. In comparison to conventional cross‐coupling reactions, cross‐electrophilic coupling (XEC) and cross‐dehydrogenative coupling (CDC) protocols eliminate the need for stoichiometric organometallic reagents, reductants, or oxidants. Additionally, it produces only minimal molecular by‐products for the formation of a series of C−C bonds and C−X bonds with high atom efficiency. This review presents a summary and classification of the research progress made over the past decade in this field. The research is classified into four main categories, decarbonylation, decarboxylation, desulfonylation, and deisocyanation, according to the type of small molecule that is liberated from the reaction system. This facilitates the implementation of more practical, straightforward, and expedient reaction operations. It is noteworthy that the reaction employs carbonyl compounds (aldehydes, ketones, carboxylic acid derivatives, etc.), sulfones, and amides, which are typically inexpensive and accessible, as reaction substrates. This groundbreaking synthetic approach has since yielded a plethora of outcomes and novel research avenues in related fields, while also offering benefits to other related fields.
- 18 September 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (79) , 11152-11155
Thiophene-fused fulminenes (FuDTs): promising platforms for high-mobility organic semiconductors with a zigzag shape
Zigzag-shaped [6]phenacene isomers with fused thiophene rings, fulmineno[2,1-b:10,9-b′]dithiophene (FuDT-α) and fulmineno[1,2-b:9,10-b′]dithiophene (FuDT-β), were syntheized and their p-type organic semicondutor properties were studied. Small effective masses of holes were estimated from the crystal structures of both isomers, which was particularly demonstrated by the hole mobility of 10.5 cm2 V−1 s−1 for FuDT-α single crystals.
- 18 September 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 60 (79) , 11152-11155
Thiophene-fused fulminenes (FuDTs): promising platforms for high-mobility organic semiconductors with a zigzag shape
Zigzag-shaped [6]phenacene isomers with fused thiophene rings, fulmineno[2,1-b:10,9-b′]dithiophene (FuDT-α) and fulmineno[1,2-b:9,10-b′]dithiophene (FuDT-β), were syntheized and their p-type organic semicondutor properties were studied. Small effective masses of holes were estimated from the crystal structures of both isomers, which was particularly demonstrated by the hole mobility of 10.5 cm2 V−1 s−1 for FuDT-α single crystals.
- 25 July 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (16) , 11905-11917
Palladium-Catalyzed Decarbonylative Nucleophilic Halogenation of Acyl Fluorides and Chlorides: Synthesis of Aryl Halides via Reductive Elimination of the C–X (X = I, Br, and Cl) Bond and Mechanistic Implications
- 25 July 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (16) , 11905-11917
Palladium-Catalyzed Decarbonylative Nucleophilic Halogenation of Acyl Fluorides and Chlorides: Synthesis of Aryl Halides via Reductive Elimination of the C–X (X = I, Br, and Cl) Bond and Mechanistic Implications
- 20 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 6 (7) , 3883-3893
Alkoxy-Substituted Anthrabisthiadiazole–Benzodithiophene-Based Wide-Band-Gap Semiconducting Polymers for High-Performance Non-Fullerene Solar Cells
- 20 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 6 (7) , 3883-3893
Alkoxy-Substituted Anthrabisthiadiazole–Benzodithiophene-Based Wide-Band-Gap Semiconducting Polymers for High-Performance Non-Fullerene Solar Cells