Dinesh K. Pandya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dinesh K. Pandya has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Sujeet Chaudhary
Indian Institute of Technology Delhi
19 shared publications - Ankit Kumar
Interuniversity Microelectronics Centre (IMEC), Leuven, Belgium
4 shared publications - Dinesh Kumar
Thin Film Laboratory, Indian Institute of Technology Delhi, New Delhi-110016, India
3 shared publications - Subhash Chand Kashyap
Insulating Materials Laboratory, Department of Physics, Indian Institute of Technology Delhi, New Delhi 110016, India
3 shared publications - Daljit Kaur
DAV University
2 shared publications - Kanwal Preet Bhatti
Guru Nanak Dev University, Department of Applied Physics, Amritsar, 143005, India
2 shared publications
Latest Publications
- 1 January 2022
- Published by Elsevier in Physica E: Low-dimensional Systems and Nanostructures
- Vol. 135
Effect of growth parameters on defect structure and optical properties of ultrathin SnO2 films
- 1 January 2022
- Published by Elsevier in Physica E: Low-dimensional Systems and Nanostructures
- Vol. 135
Effect of growth parameters on defect structure and optical properties of ultrathin SnO2 films
- Open Access
- 24 January 2019
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 10 (1) , 274-280
Site-specific growth of oriented ZnO nanocrystal arrays
We report on the growth of ZnO nanocrystals having a hexagonal, prismatic shape, sized 700 nm × 600 nm, on bare indium tin oxide (ITO) substrates. The growth is induced by a low ion flux and involves a low-temperature electrodeposition technique. Further, vertically aligned periodic nanocrystal (NC) growth is engineered at predefined positions on polymer-coated ITO substrates patterned with ordered pores. The vertical alignment of ZnO NCs along the c-axis is achieved via ion-by-ion nucleation-controlled growth for patterned pores of size ≈600 nm; however, many-coupled branched NCs with hexagonal shape are formed when a patterned pore size of ≈200 nm is used. X-ray diffraction data is in agreement with the observed morphology. A mechanism is proposed to interpret the observed site-specific oriented/branched growth that is correlated to the pore size. As ordered NC arrays have the potential to generate new collective properties different from single NCs, our first demonstration of a cost effective and facile fabrication process opens up new possibilities for devices with versatile functionalities.
- 24 January 2019
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 10 (1) , 274-280
Open AccessSite-specific growth of oriented ZnO nanocrystal arrays
We report on the growth of ZnO nanocrystals having a hexagonal, prismatic shape, sized 700 nm × 600 nm, on bare indium tin oxide (ITO) substrates. The growth is induced by a low ion flux and involves a low-temperature electrodeposition technique. Further, vertically aligned periodic nanocrystal (NC) growth is engineered at predefined positions on polymer-coated ITO substrates patterned with ordered pores. The vertical alignment of ZnO NCs along the c-axis is achieved via ion-by-ion nucleation-controlled growth for patterned pores of size ≈600 nm; however, many-coupled branched NCs with hexagonal shape are formed when a patterned pore size of ≈200 nm is used. X-ray diffraction data is in agreement with the observed morphology. A mechanism is proposed to interpret the observed site-specific oriented/branched growth that is correlated to the pore size. As ordered NC arrays have the potential to generate new collective properties different from single NCs, our first demonstration of a cost effective and facile fabrication process opens up new possibilities for devices with versatile functionalities.
- 6 June 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 122 (26) , 14408-14419
Self-Assembled Vertically Aligned Hetero-Epitaxial ZnO/CdS Core/Shell Array by all CBD Process: Platform for Enhanced Visible-Light-Driven PEC Performance
- 6 June 2018
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 122 (26) , 14408-14419
Self-Assembled Vertically Aligned Hetero-Epitaxial ZnO/CdS Core/Shell Array by all CBD Process: Platform for Enhanced Visible-Light-Driven PEC Performance
- 1 December 2017
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 444, 256-262
Anisotropic magnetic damping studies in β-Ta/2D-epitaxial-Py bilayers
- 1 December 2017
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 444, 256-262
Anisotropic magnetic damping studies in β-Ta/2D-epitaxial-Py bilayers
- Open Access
- 7 April 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (33) , 20336-20344
Deposition potential controlled structural and thermoelectric behavior of electrodeposited CoSb3 thin films
Deposition potential controlled evolution of (420) textured CoSb3 phase and micro structure correlated to enhancement in near room temperature thermoelectric power-factor.
- 7 April 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (33) , 20336-20344
Open AccessDeposition potential controlled structural and thermoelectric behavior of electrodeposited CoSb3 thin films
Deposition potential controlled evolution of (420) textured CoSb3 phase and micro structure correlated to enhancement in near room temperature thermoelectric power-factor.
- Open Access
- 23 January 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (14) , 8106-8117
Two magnon scattering and anti-damping behavior in a two-dimensional epitaxial TiN/Py(t Py )/β-Ta(t Ta ) system
The prime requirements for the spin transfer torque based ferromagnetic (FM)/nonmagnetic (NM) bilayer spin devices are (i) the absence of two-magnon scattering (TMS) noise, (ii) minimum energy dissipation and (iii) fast switching. To realize these objectives we have studied the thickness, Py (permalloy) thicknesses (tPy) and β-Ta thicknesses (tTa), dependent magnetization dynamics behaviour of the epitaxial Py (tPy = 3–20 nm)/β-Ta (tTa = 1.5–15 nm) system. The tPy dependence of TMS in epitaxial Py nano-layers (tPy = 3–20 nm) grown on a Si(400)/TiN(200) (8 nm) substrate is explored in terms of uniform and non-uniform magnetization precession regimes by employing ferromagnetic resonance field (Hr), line-width (ΔH), and Gilbert damping constant (α) behaviour. It is found that in Py, tPy < 10 nm, layers TMS is dominating due to non-uniform precession of the magnetization. However in Py, tPy ≥ 10 nm, layers the uniform magnetization precession dominates, therefore Py layers, tPy ≥ 10 nm, are almost free from TMS. Furthermore, a nearly TMS free 12 nm epitaxial Py(200) layer is capped with β-Ta (tTa = 1.5–15 nm) layers to explore the tTa dependent magnetization precession of epitaxial Py (12 nm) in terms of change in effective Gilbert damping constant (αeff). An anomalous decrease in αeff from 0.0087 at tTa = 0 to a minimum value of 0.0077 at tTa = 6 nm, and its subsequent increase for tTa > 6 nm are observed in the epitaxial Py (12 nm)/β-Ta(tTa) system. Therefore the Si(400)/TiN(200) (8 nm)/Py(200) (12 nm)/β-Ta(200) (6 nm) epitaxial system with nearly uniform magnetic precession and minimum effective Gilbert damping is suitable for low energy loss and ultrafast switching applications in spin transfer torque devices.
- 23 January 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (14) , 8106-8117
Open AccessTwo magnon scattering and anti-damping behavior in a two-dimensional epitaxial TiN/Py(t Py )/β-Ta(t Ta ) system
The prime requirements for the spin transfer torque based ferromagnetic (FM)/nonmagnetic (NM) bilayer spin devices are (i) the absence of two-magnon scattering (TMS) noise, (ii) minimum energy dissipation and (iii) fast switching. To realize these objectives we have studied the thickness, Py (permalloy) thicknesses (tPy) and β-Ta thicknesses (tTa), dependent magnetization dynamics behaviour of the epitaxial Py (tPy = 3–20 nm)/β-Ta (tTa = 1.5–15 nm) system. The tPy dependence of TMS in epitaxial Py nano-layers (tPy = 3–20 nm) grown on a Si(400)/TiN(200) (8 nm) substrate is explored in terms of uniform and non-uniform magnetization precession regimes by employing ferromagnetic resonance field (Hr), line-width (ΔH), and Gilbert damping constant (α) behaviour. It is found that in Py, tPy < 10 nm, layers TMS is dominating due to non-uniform precession of the magnetization. However in Py, tPy ≥ 10 nm, layers the uniform magnetization precession dominates, therefore Py layers, tPy ≥ 10 nm, are almost free from TMS. Furthermore, a nearly TMS free 12 nm epitaxial Py(200) layer is capped with β-Ta (tTa = 1.5–15 nm) layers to explore the tTa dependent magnetization precession of epitaxial Py (12 nm) in terms of change in effective Gilbert damping constant (αeff). An anomalous decrease in αeff from 0.0087 at tTa = 0 to a minimum value of 0.0077 at tTa = 6 nm, and its subsequent increase for tTa > 6 nm are observed in the epitaxial Py (12 nm)/β-Ta(tTa) system. Therefore the Si(400)/TiN(200) (8 nm)/Py(200) (12 nm)/β-Ta(200) (6 nm) epitaxial system with nearly uniform magnetic precession and minimum effective Gilbert damping is suitable for low energy loss and ultrafast switching applications in spin transfer torque devices.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
Tunneling Magneto-resistance in grain boundary tailored Fe3O4 nano structured thin films
The pulse DC sputtered nanostructured Fe3O4 thin films have been subjected to hydrocarbon treatment and vacuum annealing to investigate their effect on grain boundaries. Remarkably, this treatment causes a change in the crystallographic structure of the film from polycrystalline to (440) oriented one and enhancement in film conductivity. Hopping conduction mechanism changes to nearest-neighbor hoping above Verwey transition temperature of 110 K on treatment. Treatment also leads to grain boundary modification by incorporation of antiferro defects that inhibit an increase in MR despite enhanced electron conduction across grain boundaries. Our results follow the non-homogeneous grain boundary model.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
Tunneling Magneto-resistance in grain boundary tailored Fe3O4 nano structured thin films
The pulse DC sputtered nanostructured Fe3O4 thin films have been subjected to hydrocarbon treatment and vacuum annealing to investigate their effect on grain boundaries. Remarkably, this treatment causes a change in the crystallographic structure of the film from polycrystalline to (440) oriented one and enhancement in film conductivity. Hopping conduction mechanism changes to nearest-neighbor hoping above Verwey transition temperature of 110 K on treatment. Treatment also leads to grain boundary modification by incorporation of antiferro defects that inhibit an increase in MR despite enhanced electron conduction across grain boundaries. Our results follow the non-homogeneous grain boundary model.
- 29 September 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (97) , 94717-94722
Orbital moment probed spin orbit coupling effects on anisotropy and damping in CoFeB thin films
Spin orbit coupling based direct correlation between magnetic anisotropy and damping is established in CoFeB thin films on compositional and stress variations.
- 29 September 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (97) , 94717-94722
Orbital moment probed spin orbit coupling effects on anisotropy and damping in CoFeB thin films
Spin orbit coupling based direct correlation between magnetic anisotropy and damping is established in CoFeB thin films on compositional and stress variations.
- Open Access
- 1 March 2016
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 163 (6) , D221-D229
Hydrogen Co-Deposition Induced Phase and Microstructure Evolution of Cobalt Nanowires Electrodeposited in Acidic Baths
The growth and deposition mechanism of electrodeposited cobalt nanowires (NWs) at different bath temperatures (25°C–60°C) in strongly acidic bath (pH of 2.0) is studied. CV scans show that hydrogen co-deposition is most pronounced in 50°C bath. X-ray diffraction patterns of Co NWs show that a mixture of hcp and fcc phases grows at 25°C, (200) textured fcc-Co phase grows at 50°C, and (101̄0)(101̄0) and (11 2̄2̄ 0) textured hcp-Co phase at 60°C, with these planes normal to the NW-axis. The magnetic properties studied by vibrating sample magnetometer show the change in coercivity, saturation field and magnetization reversal behavior is consistent with the phase of NW. Nucleation mechanism is explained on the basis of intermediates formation induced by the extent of hydrogen co-deposition leading to the change in nucleation overpotential and linked selection of the growth plane as per bath pH and temperature. Chronoamperometry study has confirmed the instantaneous and progressive growth mechanisms operative at 50°C and 60°C respectively and hydrogen co-deposition controlled grain size growth model is also put forth to understand the growth kinetics of fcc and hcp phase Co NWs. The suggested growth mechanism also consistently explains the growth in less acidic bath of pH 4.5.
- 1 March 2016
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 163 (6) , D221-D229
Open AccessHydrogen Co-Deposition Induced Phase and Microstructure Evolution of Cobalt Nanowires Electrodeposited in Acidic Baths
The growth and deposition mechanism of electrodeposited cobalt nanowires (NWs) at different bath temperatures (25°C–60°C) in strongly acidic bath (pH of 2.0) is studied. CV scans show that hydrogen co-deposition is most pronounced in 50°C bath. X-ray diffraction patterns of Co NWs show that a mixture of hcp and fcc phases grows at 25°C, (200) textured fcc-Co phase grows at 50°C, and (101̄0)(101̄0) and (11 2̄2̄ 0) textured hcp-Co phase at 60°C, with these planes normal to the NW-axis. The magnetic properties studied by vibrating sample magnetometer show the change in coercivity, saturation field and magnetization reversal behavior is consistent with the phase of NW. Nucleation mechanism is explained on the basis of intermediates formation induced by the extent of hydrogen co-deposition leading to the change in nucleation overpotential and linked selection of the growth plane as per bath pH and temperature. Chronoamperometry study has confirmed the instantaneous and progressive growth mechanisms operative at 50°C and 60°C respectively and hydrogen co-deposition controlled grain size growth model is also put forth to understand the growth kinetics of fcc and hcp phase Co NWs. The suggested growth mechanism also consistently explains the growth in less acidic bath of pH 4.5.
- 1 January 2016
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1728 (1) , 020104
Structural and optical properties of nano-structured CdS thin films prepared by chemical bath deposition
Cadmium sulfide (CdS) thin films have been deposited on conducting glass substrates by chemical bath deposition (CBD) technique. The effect of precursor concentration on the structural, morphological, compositional, and optical properties of the CdS films has been studied. Crystal structure of these CdS films is characterized by X-ray diffraction (XRD) and it reveals polycrystalline structure with mixture of cubic and wurtzite phases with grain size decreasing as precursor concentration is increased. Optical studies reveal that the CdS thin films have high transmittance in visible spectral region reaching 90% and the films possess direct optical band gap that decreases from 2.46 to 2.39 eV with decreasing bath concentration. Our study suggests that growth is nucleation controlled.
- 1 January 2016
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1728 (1) , 020104
Structural and optical properties of nano-structured CdS thin films prepared by chemical bath deposition
Cadmium sulfide (CdS) thin films have been deposited on conducting glass substrates by chemical bath deposition (CBD) technique. The effect of precursor concentration on the structural, morphological, compositional, and optical properties of the CdS films has been studied. Crystal structure of these CdS films is characterized by X-ray diffraction (XRD) and it reveals polycrystalline structure with mixture of cubic and wurtzite phases with grain size decreasing as precursor concentration is increased. Optical studies reveal that the CdS thin films have high transmittance in visible spectral region reaching 90% and the films possess direct optical band gap that decreases from 2.46 to 2.39 eV with decreasing bath concentration. Our study suggests that growth is nucleation controlled.