Ulugbek T. Begaliev
Research Subjects
Ulugbek T. Begaliev has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
B. Moldobekov
Central Asian Institute of Applied Geosciences, 720027 Bishkek, Kyrgyzstan
3 shared publications- Marc Wieland
German Aerospace Center (DLR), German Remote Sensing Data Center (DFD), Weßling, Germany
3 shared publications - Massimiliano Pittore
Center for Climate Change and Transformation, Eurac Research, Bolzano, Italy
3 shared publications S. Parolai
GFZ German Research Centre for Geosciences, Potsdam, Germany
3 shared publications- Sayat Niyetbay
Satbayev University
3 shared publications - Assylbek Shadkam
Satbayev University
2 shared publications
Latest Publications
- 30 September 2026
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 101 (3) , 137-152
RELIABILITY CALCULATION OF BAR SYSTEMS UNDER FATIGUE FAILURE
The article is devoted to the development of methods for assessing the reliability of elastic systems with random parameters of structural elements based on static models. At present, probabilistic methods are increasingly replacing traditional approaches based on allowable stresses and limit states, becoming the foundation of modern building codes and standards. Within this framework, structural failure is considered a random event, while reliability and stability are defined by the probability of failure-free operation. For systems subjected to time-invariant loads and possessing constant material properties, static reliability models provide an effective analytical tool. Despite advances in construction science and engineering, the assessment of structural reliability under random actions remains a highly relevant issue due to increasingly complex operating conditions and growing safety requirements for engineering structures. The scientific novelty of the study lies in the fact that approximate analytical relationships have been obtained for the first time for determining the reliability and service life of elastic structural systems, taking into account the random nature of both variable stress amplitudes and the fatigue limit of mаterials. A new engineering methodology for the probabilistic analysis and design of multielement mechanical systems has been proposed, incorporating the effect of dependent failures of structural elements. Furthermore, analytical relationships between static reliability models and multifactor random parameters of structures have been established for the first time. The developed methods and analytical relationships have been transformed into engineering algorithms, providing a practical basis for the reliable design of complex load-bearing systems.
- 30 September 2026
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 101 (3) , 137-152
RELIABILITY CALCULATION OF BAR SYSTEMS UNDER FATIGUE FAILURE
The article is devoted to the development of methods for assessing the reliability of elastic systems with random parameters of structural elements based on static models. At present, probabilistic methods are increasingly replacing traditional approaches based on allowable stresses and limit states, becoming the foundation of modern building codes and standards. Within this framework, structural failure is considered a random event, while reliability and stability are defined by the probability of failure-free operation. For systems subjected to time-invariant loads and possessing constant material properties, static reliability models provide an effective analytical tool. Despite advances in construction science and engineering, the assessment of structural reliability under random actions remains a highly relevant issue due to increasingly complex operating conditions and growing safety requirements for engineering structures. The scientific novelty of the study lies in the fact that approximate analytical relationships have been obtained for the first time for determining the reliability and service life of elastic structural systems, taking into account the random nature of both variable stress amplitudes and the fatigue limit of mаterials. A new engineering methodology for the probabilistic analysis and design of multielement mechanical systems has been proposed, incorporating the effect of dependent failures of structural elements. Furthermore, analytical relationships between static reliability models and multifactor random parameters of structures have been established for the first time. The developed methods and analytical relationships have been transformed into engineering algorithms, providing a practical basis for the reliable design of complex load-bearing systems.
- 30 September 2026
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 101 (3) , 84-97
RELIABILITY OF RAFT FOUNDATIONS FOR WIND POWER PLANTS ON REINFORCED SOIL
The reliability assessment of wind power plants founded on raft foundations is highly relevant due to the rapid growth of wind energy projects. The aim of this study is to develop a scientifically substantiated methodology for the geotechnical and probabilistic reliability assessment of wind power plants (WPPs) on raft foundations, considering the interaction within the “soil-foundation slab-wind turbine tower” system, the variability of soil physical and mechanical properties, and the stochastic nature of wind loads. The results of geotechnical analyses performed using the finite element method in MIDAS GTS NX confirm that the gravity-type monolithic foundation satisfies the deformation and bearing capacity criteria. Probabilistic modelling methods enabled the quantitative evaluation of the reliability index β and probability of failure Pf of the raft foundation, considering the actual variability of soil properties, and allowed the safety margins in terms of structural strength and stability to be assessed. The scientific novelty of the study lies in the development of an integrated probabilistic-geotechnical approach for assessing the reliability of wind power plants on raft foundations while accounting for the stochastic variability of soil physical and mechanical properties, distinguishing the proposed methodology from conventional deterministic design approaches. The practical significance of the study lies in the direct applicability of the developed methodology to the design, construction, and operation of wind power plants, thereby improving the safety, economic efficiency, and durability of wind energy infrastructure.
- 30 September 2026
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 101 (3) , 84-97
RELIABILITY OF RAFT FOUNDATIONS FOR WIND POWER PLANTS ON REINFORCED SOIL
The reliability assessment of wind power plants founded on raft foundations is highly relevant due to the rapid growth of wind energy projects. The aim of this study is to develop a scientifically substantiated methodology for the geotechnical and probabilistic reliability assessment of wind power plants (WPPs) on raft foundations, considering the interaction within the “soil-foundation slab-wind turbine tower” system, the variability of soil physical and mechanical properties, and the stochastic nature of wind loads. The results of geotechnical analyses performed using the finite element method in MIDAS GTS NX confirm that the gravity-type monolithic foundation satisfies the deformation and bearing capacity criteria. Probabilistic modelling methods enabled the quantitative evaluation of the reliability index β and probability of failure Pf of the raft foundation, considering the actual variability of soil properties, and allowed the safety margins in terms of structural strength and stability to be assessed. The scientific novelty of the study lies in the development of an integrated probabilistic-geotechnical approach for assessing the reliability of wind power plants on raft foundations while accounting for the stochastic variability of soil physical and mechanical properties, distinguishing the proposed methodology from conventional deterministic design approaches. The practical significance of the study lies in the direct applicability of the developed methodology to the design, construction, and operation of wind power plants, thereby improving the safety, economic efficiency, and durability of wind energy infrastructure.
- Open Access
- 30 September 2026
- Published by D. Serikbayev East Kazakhstan Technical University in KTU Journal of Architectural and Construction Sciences
- Vol. 1 (3) , 35
GEOTECHNICAL AND PROBABILISTIC EVALUATION OF THE EFFICIENCY OF A MODEL FOR STRENGTHENING THE BASE OF A RAFT FOUNDATION USING RIGID REINFORCEMENT ELEMENTS
Construction in densely built urban areas, especially on artificial fill and highly compressible soils, requires effective methods for improving foundation performance. One of the most promising solutions is soil reinforcement using rigid inclusions; however, unified design and construction approaches remain insufficiently developed. This study proposes a model for reinforcing raft foundation bases with vertical rigid displacement elements by integrating geotechnical, structural, and probabilistic methods. The proposed model allows prediction and control of foundation settlement through the equivalent deformation modulus of the reinforced soil and the stiffness of the improved base, determined by the spacing and number of reinforcing elements. The reliability of the system was assessed using Monte Carlo, FORM, and SORM methods, which enabled determination of the reliability index and the most probable failure point. The results demonstrate that the proposed reinforcement technology can reduce foundation settlement, improve reliability, lower construction costs, and shorten construction time compared with conventional soil improvement techniques. The developed approach may serve as a basis for the design and reliability assessment of reinforced foundation systems in civil engineering.
- 30 September 2026
- Published by D. Serikbayev East Kazakhstan Technical University in KTU Journal of Architectural and Construction Sciences
- Vol. 1 (3) , 35
Open AccessGEOTECHNICAL AND PROBABILISTIC EVALUATION OF THE EFFICIENCY OF A MODEL FOR STRENGTHENING THE BASE OF A RAFT FOUNDATION USING RIGID REINFORCEMENT ELEMENTS
Construction in densely built urban areas, especially on artificial fill and highly compressible soils, requires effective methods for improving foundation performance. One of the most promising solutions is soil reinforcement using rigid inclusions; however, unified design and construction approaches remain insufficiently developed. This study proposes a model for reinforcing raft foundation bases with vertical rigid displacement elements by integrating geotechnical, structural, and probabilistic methods. The proposed model allows prediction and control of foundation settlement through the equivalent deformation modulus of the reinforced soil and the stiffness of the improved base, determined by the spacing and number of reinforcing elements. The reliability of the system was assessed using Monte Carlo, FORM, and SORM methods, which enabled determination of the reliability index and the most probable failure point. The results demonstrate that the proposed reinforcement technology can reduce foundation settlement, improve reliability, lower construction costs, and shorten construction time compared with conventional soil improvement techniques. The developed approach may serve as a basis for the design and reliability assessment of reinforced foundation systems in civil engineering.
- 30 June 2026
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 100 (2) , 61-87
COMPARISON OF ANALYSIS RESULTS OF STEEL FRAME OF FRAME BUILDINGS IN ACCORDANC WITH SP RK EN 19981:2004/2012 AND SP RK 2.03-30-2017*
In the Republic of Kazakhstan, a transition has been implemented to new structural design standards, SP RK EN, which are harmonized with the Eurocodes and include National Annexes. At present, in the field of seismic design in Kazakhstan, two regulatory documents coexist in parallel: SP RK 2.03-30-2017* “Construction in Seismic Regions” and SP RK EN 1998-1:2004/2012 “Design of Structures for Earthquake Resistance. Part 1: General Rules, Seismic Actions and Rules for Buildings,” along with their respective Scientific and Technical Guidelines (STGs). According to Clause 1.4(5) of SP RK EN 1990:2002+A1:2005/2011 (the fundamental basis of the Eurocode system), alternative design rules differing from those specified in EN 1990 may be applied, provided that such alternative rules comply with the fundamental principles and ensure structural safety, serviceability, and durability at least equivalent to those required by the Eurocodes. This study compares the results of analyses of reinforced steel moment-resisting frames of frame-type buildings, obtained using the design provisions of SP RK 2.03-30-2017* and SP RK EN 1998-1, in order to verify the compliance of SP RK 2.03-30-2017* with Clause 1.4(5) of SP RK EN 1990. The objective of this study is to assess the compliance of the requirements of SP RK 2.03-30-2017* with the provisions of Clause 1.4(5) of SP RK EN 1990 through a comparative analysis of the results of three-dimensional structural analysis of steel moment-resisting frame buildings performed in accordance with the current national design code and the new Eurocode-based regulatory documents. The study is based on the numerical modeling of a three-dimensional steel frame using two design approaches, namely the current national code and the newly adopted Eurocode-based standards. A comparative evaluation of structural displacements, internal forces, stiffness characteristics, and the principal design parameters of the load-bearing frame elements was carried out. The obtained results make it possible to determine the degree of agreement between the structural response predicted by SP RK 2.03-30-2017* and SP RK EN 1998-1, as well as to evaluate the applicability of the national code as an alternative design approach for buildings located in seismic regions. The scientific novelty of the study lies in the comprehensive comparative assessment of the equivalence of the new regulatory framework for the three-dimensional analysis of steel frame buildings subjected to seismic loading. The findings provide a scientific basis for the further harmonization and updating of Kazakhstan's national seismic design standards in accordance with the Eurocodes and contribute to the improvement of engineering practices for earthquake-resistant structural design.
- 30 June 2026
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 100 (2) , 61-87
COMPARISON OF ANALYSIS RESULTS OF STEEL FRAME OF FRAME BUILDINGS IN ACCORDANC WITH SP RK EN 19981:2004/2012 AND SP RK 2.03-30-2017*
In the Republic of Kazakhstan, a transition has been implemented to new structural design standards, SP RK EN, which are harmonized with the Eurocodes and include National Annexes. At present, in the field of seismic design in Kazakhstan, two regulatory documents coexist in parallel: SP RK 2.03-30-2017* “Construction in Seismic Regions” and SP RK EN 1998-1:2004/2012 “Design of Structures for Earthquake Resistance. Part 1: General Rules, Seismic Actions and Rules for Buildings,” along with their respective Scientific and Technical Guidelines (STGs). According to Clause 1.4(5) of SP RK EN 1990:2002+A1:2005/2011 (the fundamental basis of the Eurocode system), alternative design rules differing from those specified in EN 1990 may be applied, provided that such alternative rules comply with the fundamental principles and ensure structural safety, serviceability, and durability at least equivalent to those required by the Eurocodes. This study compares the results of analyses of reinforced steel moment-resisting frames of frame-type buildings, obtained using the design provisions of SP RK 2.03-30-2017* and SP RK EN 1998-1, in order to verify the compliance of SP RK 2.03-30-2017* with Clause 1.4(5) of SP RK EN 1990. The objective of this study is to assess the compliance of the requirements of SP RK 2.03-30-2017* with the provisions of Clause 1.4(5) of SP RK EN 1990 through a comparative analysis of the results of three-dimensional structural analysis of steel moment-resisting frame buildings performed in accordance with the current national design code and the new Eurocode-based regulatory documents. The study is based on the numerical modeling of a three-dimensional steel frame using two design approaches, namely the current national code and the newly adopted Eurocode-based standards. A comparative evaluation of structural displacements, internal forces, stiffness characteristics, and the principal design parameters of the load-bearing frame elements was carried out. The obtained results make it possible to determine the degree of agreement between the structural response predicted by SP RK 2.03-30-2017* and SP RK EN 1998-1, as well as to evaluate the applicability of the national code as an alternative design approach for buildings located in seismic regions. The scientific novelty of the study lies in the comprehensive comparative assessment of the equivalence of the new regulatory framework for the three-dimensional analysis of steel frame buildings subjected to seismic loading. The findings provide a scientific basis for the further harmonization and updating of Kazakhstan's national seismic design standards in accordance with the Eurocodes and contribute to the improvement of engineering practices for earthquake-resistant structural design.
- 30 June 2026
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 100 (2) , 46-60
COMPARATIVE CALCULATIONS OF FRAME BUILDINGS WITH REINFORCED CONCRETE FRAMES ACCORDING TO STANDARDS SP RK EN 1998-1:2004/2012 AND SP RK 2.03-30-2017*
Kazakhstan has implemented the transition to new building design standards SR RK EN, identical to the Eurocodes, with National Appendices. At the moment, in Kazakhstan, in the field of seismic design, two regulatory documents coexist in parallel. These are SP RK 2.03-30-2017* "Construction in seismic zones" and SP RK EN 1998-1:2004/2012 "Design of earthquake-resistant structures. Part 1. General rules, seismic effects and rules for buildings" and scientific and technical manuals for them. According to 1.4(5) SP RK EN 1990:2002+A1:2005/2011 (the main fundamental document of the Eurocodes), alternative design rules that differ from the EN 1990 rules, may be used if the alternative rules are consistent with the fundamental principles and ensure structural safety, serviceability and durability at least equivalent to those provided for in the Eurocodes. This paper compares the results of calculations of moment reinforced concrete frames of frame buildings obtained according to the design standards SP RK 2.03-30-2017* and SP RK EN 1998-1 to verify the compliance of SP RK 2.03-30-2017* with clause 1.4(5) of SP RK EN 1990. The objective of this study is to compare the results of three-dimensional structural analyses performed in accordance with the provisions of SP RK 2.03-30-2017* with the requirements of Clause 1.4(5) of SP RK EN 1990, based on a comparative assessment of the calculation results for reinforced concrete moment-resisting frame buildings designed according to the current and the new regulatory frameworks. The calculation methodology is based on the numerical modeling of a three-dimensional reinforced concrete frame structure, followed by a comparative analysis of stiffness characteristics, displacements, internal forces, and design parameters of structural elements obtained in accordance with SP RK 2.03-30-2017* and SP RK EN 1998-1. The scientific novelty of the study lies in the comprehensive evaluation of the equivalence of the current and the newly adopted seismic design codes as applied to reinforced concrete frame buildings. The findings contribute to the assessment of the consistency between the existing national seismic design provisions and the Eurocode-based regulatory framework and provide a basis for the further improvement and harmonization of seismic design standards in the Republic of Kazakhstan.
- 30 June 2026
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 100 (2) , 46-60
COMPARATIVE CALCULATIONS OF FRAME BUILDINGS WITH REINFORCED CONCRETE FRAMES ACCORDING TO STANDARDS SP RK EN 1998-1:2004/2012 AND SP RK 2.03-30-2017*
Kazakhstan has implemented the transition to new building design standards SR RK EN, identical to the Eurocodes, with National Appendices. At the moment, in Kazakhstan, in the field of seismic design, two regulatory documents coexist in parallel. These are SP RK 2.03-30-2017* "Construction in seismic zones" and SP RK EN 1998-1:2004/2012 "Design of earthquake-resistant structures. Part 1. General rules, seismic effects and rules for buildings" and scientific and technical manuals for them. According to 1.4(5) SP RK EN 1990:2002+A1:2005/2011 (the main fundamental document of the Eurocodes), alternative design rules that differ from the EN 1990 rules, may be used if the alternative rules are consistent with the fundamental principles and ensure structural safety, serviceability and durability at least equivalent to those provided for in the Eurocodes. This paper compares the results of calculations of moment reinforced concrete frames of frame buildings obtained according to the design standards SP RK 2.03-30-2017* and SP RK EN 1998-1 to verify the compliance of SP RK 2.03-30-2017* with clause 1.4(5) of SP RK EN 1990. The objective of this study is to compare the results of three-dimensional structural analyses performed in accordance with the provisions of SP RK 2.03-30-2017* with the requirements of Clause 1.4(5) of SP RK EN 1990, based on a comparative assessment of the calculation results for reinforced concrete moment-resisting frame buildings designed according to the current and the new regulatory frameworks. The calculation methodology is based on the numerical modeling of a three-dimensional reinforced concrete frame structure, followed by a comparative analysis of stiffness characteristics, displacements, internal forces, and design parameters of structural elements obtained in accordance with SP RK 2.03-30-2017* and SP RK EN 1998-1. The scientific novelty of the study lies in the comprehensive evaluation of the equivalence of the current and the newly adopted seismic design codes as applied to reinforced concrete frame buildings. The findings contribute to the assessment of the consistency between the existing national seismic design provisions and the Eurocode-based regulatory framework and provide a basis for the further improvement and harmonization of seismic design standards in the Republic of Kazakhstan.
- 30 March 2026
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 99 (1) , 166-177
IMPROVING THE RELIABILITY AND EFFICIENCY OF OPERATION OF HYDRAULIC STRUCTURES OF THE ASTANA RESERVOIR THROUGH RECONSTRUCTION AND MODERNIZATION
This paper examines ways to improve the reliability and operational efficiency of the Astana Reservoir hydraulic structures through reconstruction and modernization. The reservoir, commissioned in 1970, is a key facility for water supply to Astana and irrigation, and its earth dam has a total length of 1,154 m and a maximum height of 32 m. The study is based on the 2023 dam safety declaration and the 2025 verification report on overall stability and seepage strength. Numerical analyses were performed in PLAXIS 2D using the finite element method, the Mohr–Coulomb model, and a strength-reduction approach for five representative cross-sections. The assessment compared the existing condition with two reconstruction scenarios: installation of an anti-filtration screen, and installation of an anti-filtration screen combined with a cement grout curtain. The results showed that, despite a generally satisfactory visual condition, the existing dam configuration has unsafe seepage behavior and critical local instability in the most unfavorable section. Reconstruction measures significantly increased stability coefficients, reduced seepage gradients and velocities, and ensured filtration strength. The paper concludes that the most effective strategy is an integrated program combining anti-seepage reconstruction, renewal of nonfunctional monitoring systems, and digitalized water metering and operational control for long-term dam safety and management efficiency.
- 30 March 2026
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 99 (1) , 166-177
IMPROVING THE RELIABILITY AND EFFICIENCY OF OPERATION OF HYDRAULIC STRUCTURES OF THE ASTANA RESERVOIR THROUGH RECONSTRUCTION AND MODERNIZATION
This paper examines ways to improve the reliability and operational efficiency of the Astana Reservoir hydraulic structures through reconstruction and modernization. The reservoir, commissioned in 1970, is a key facility for water supply to Astana and irrigation, and its earth dam has a total length of 1,154 m and a maximum height of 32 m. The study is based on the 2023 dam safety declaration and the 2025 verification report on overall stability and seepage strength. Numerical analyses were performed in PLAXIS 2D using the finite element method, the Mohr–Coulomb model, and a strength-reduction approach for five representative cross-sections. The assessment compared the existing condition with two reconstruction scenarios: installation of an anti-filtration screen, and installation of an anti-filtration screen combined with a cement grout curtain. The results showed that, despite a generally satisfactory visual condition, the existing dam configuration has unsafe seepage behavior and critical local instability in the most unfavorable section. Reconstruction measures significantly increased stability coefficients, reduced seepage gradients and velocities, and ensured filtration strength. The paper concludes that the most effective strategy is an integrated program combining anti-seepage reconstruction, renewal of nonfunctional monitoring systems, and digitalized water metering and operational control for long-term dam safety and management efficiency.
- 30 December 2025
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 98 (4) , 241-255
SEISMIC RESPONSE OF A 22-STOREY MONOLITHIC BUILDING BASED ON INSTRUMENTAL ACCELERATION RECORDS
This study addresses the growing need for reliable seismic verification of high-rise monolithic reinforced concrete buildings in Almaty, Kazakhstan, where intensive vertical development is taking place in a high-hazard seismic environment. To improve the realism of structural response prediction, the building performance is evaluated using instrumental earthquake acceleration records and compared with the conventional response spectrum approach commonly applied in design practice. A 22-storey monolithic building is analyzed in the LIRA-SAPR environment by two independent procedures: (i) response spectrum analysis under the design spectrum and (ii) time-history analysis using selected three-component accelerograms representing strong ground motions (including recorded and artificial events). The comparison is performed for a representative structural element at the upper levels (a reinforced concrete wall along Axis 1/B at elevation 74.25 m), where higher-mode effects may be significant. The results indicate that peak lateral displacements are strongly record-dependent. For the El Centro (1940) input, time-history displacements are practically consistent with the spectrum-based estimates, whereas for the Kern County (1952), Baysorun (1990), and the artificial record, time-history responses are noticeably lower than those obtained by the response spectrum method, confirming the conservative nature of spectrum-based design. The observed discrepancies are primarily attributed to differences in frequency content and duration of ground motion. The findings support the combined use of response spectrum analysis for routine design and time-history analysis for enhanced verification of high-rise buildings, especially in regions with pronounced regional ground-motion features. The study also substantiates the value of engineering seismometric monitoring for refining local seismic inputs and improving assessment reliability.
- 30 December 2025
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 98 (4) , 241-255
SEISMIC RESPONSE OF A 22-STOREY MONOLITHIC BUILDING BASED ON INSTRUMENTAL ACCELERATION RECORDS
This study addresses the growing need for reliable seismic verification of high-rise monolithic reinforced concrete buildings in Almaty, Kazakhstan, where intensive vertical development is taking place in a high-hazard seismic environment. To improve the realism of structural response prediction, the building performance is evaluated using instrumental earthquake acceleration records and compared with the conventional response spectrum approach commonly applied in design practice. A 22-storey monolithic building is analyzed in the LIRA-SAPR environment by two independent procedures: (i) response spectrum analysis under the design spectrum and (ii) time-history analysis using selected three-component accelerograms representing strong ground motions (including recorded and artificial events). The comparison is performed for a representative structural element at the upper levels (a reinforced concrete wall along Axis 1/B at elevation 74.25 m), where higher-mode effects may be significant. The results indicate that peak lateral displacements are strongly record-dependent. For the El Centro (1940) input, time-history displacements are practically consistent with the spectrum-based estimates, whereas for the Kern County (1952), Baysorun (1990), and the artificial record, time-history responses are noticeably lower than those obtained by the response spectrum method, confirming the conservative nature of spectrum-based design. The observed discrepancies are primarily attributed to differences in frequency content and duration of ground motion. The findings support the combined use of response spectrum analysis for routine design and time-history analysis for enhanced verification of high-rise buildings, especially in regions with pronounced regional ground-motion features. The study also substantiates the value of engineering seismometric monitoring for refining local seismic inputs and improving assessment reliability.
- 30 September 2025
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 97 (3) , 108-125
ANALYSIS AND EVALUATION OF EXPERIMENTAL METHODS FOR DETERMINING THE STRENGTH OF CONCRETE
The study presents an overview of several experimental techniques used to determine the strength and bearing capacity of concrete. During the research, special attention was paid to how the quality of the mix and curing conditions influence the reliability of the results. The experiments were carried out on cube, prism, and cylinder specimens that were tested at different stages of hardening. The obtained data helped to trace how the internal structure of concrete changes with time and to identify the factors that most strongly affect its load resistance. Compressive and flexural strengths were determined using three specimen types: cubes, prisms, and cylinders. Ten samples of each shape were produced and tested at different ages over a curing period of 180 days. These experiments allowed calculation of the coefficient of variation and tracking of strength development over time. Results showed that destructive testing provides dependable data on the mechanical response of concrete under load. The total specimen volume did not significantly influence strength; however, widening the cross-sectional area at the upper surface tended to reduce resistance and foster the formation of micro-cracks. Conversely, smaller sections demonstrated higher strength values and more stable variation coefficients. The findings also underline the limitations of relying solely on average strength indicators.
- 30 September 2025
- Published by LLP International Educational Corporation in Bulletin of Kazakh Leading Academy of Architecture and Construction
- Vol. 97 (3) , 108-125
ANALYSIS AND EVALUATION OF EXPERIMENTAL METHODS FOR DETERMINING THE STRENGTH OF CONCRETE
The study presents an overview of several experimental techniques used to determine the strength and bearing capacity of concrete. During the research, special attention was paid to how the quality of the mix and curing conditions influence the reliability of the results. The experiments were carried out on cube, prism, and cylinder specimens that were tested at different stages of hardening. The obtained data helped to trace how the internal structure of concrete changes with time and to identify the factors that most strongly affect its load resistance. Compressive and flexural strengths were determined using three specimen types: cubes, prisms, and cylinders. Ten samples of each shape were produced and tested at different ages over a curing period of 180 days. These experiments allowed calculation of the coefficient of variation and tracking of strength development over time. Results showed that destructive testing provides dependable data on the mechanical response of concrete under load. The total specimen volume did not significantly influence strength; however, widening the cross-sectional area at the upper surface tended to reduce resistance and foster the formation of micro-cracks. Conversely, smaller sections demonstrated higher strength values and more stable variation coefficients. The findings also underline the limitations of relying solely on average strength indicators.
- 20 May 2025
- Published by International University of Innovation Technologies in Science and Innovative Technologies
- p. 12
КОМПЛЕКСНОЕ ИССЛЕДОВАНИЕ СВОЙСТВ КРЕПЕЖНЫХ ЭЛЕМЕНТОВ ВЕНТИЛИРУЕМЫХ ФАСАДОВ
Вентилируемые фасады, обеспечивающие энергоэффективность и долговечность зданий, требуют надёжных крепежных элементов, способных выдерживать механические, коррозионные и температурные воздействия. Настоящее исследование представляет комплексный анализ свойств крепежных систем, включая винты, болты, анкеры и клипсы, применяемые в фасадных конструкциях. Особое внимание уделено методам испытаний на сдвиг, критически важных для оценки устойчивости соединений к поперечным нагрузкам, вызванным ветровыми или сейсмическими воздействиями. Анализированное исследование охватывало коррозионную стойкость, тепловые характеристики и акустические свойства крепежей, выявляя преимущества нержавеющей стали с оптимизированной геометрией, обеспечивающей сдвиговую прочность до 6,5 кН и минимальные тепловые потери. Полученные данные подчёркивают необходимость комплексного подхода к выбору крепежных элементов, учитывающего механические, экологические и энергетические требования. Результаты испытаний и моделирования предоставляют проектировщикам основу для оптимизации фасадных систем, особенно в условиях строгих стандартов энергоэффективности. В перспективе необходимо дальнейшее исследование с разработкой систем крепежных решений, выдерживающих циклические и гравитационные нагрузки, сочетающих прочность металла, для повышения долговечности и функциональности вентилируемых фасадов.
- 20 May 2025
- Published by International University of Innovation Technologies in Science and Innovative Technologies
- p. 12
КОМПЛЕКСНОЕ ИССЛЕДОВАНИЕ СВОЙСТВ КРЕПЕЖНЫХ ЭЛЕМЕНТОВ ВЕНТИЛИРУЕМЫХ ФАСАДОВ
Вентилируемые фасады, обеспечивающие энергоэффективность и долговечность зданий, требуют надёжных крепежных элементов, способных выдерживать механические, коррозионные и температурные воздействия. Настоящее исследование представляет комплексный анализ свойств крепежных систем, включая винты, болты, анкеры и клипсы, применяемые в фасадных конструкциях. Особое внимание уделено методам испытаний на сдвиг, критически важных для оценки устойчивости соединений к поперечным нагрузкам, вызванным ветровыми или сейсмическими воздействиями. Анализированное исследование охватывало коррозионную стойкость, тепловые характеристики и акустические свойства крепежей, выявляя преимущества нержавеющей стали с оптимизированной геометрией, обеспечивающей сдвиговую прочность до 6,5 кН и минимальные тепловые потери. Полученные данные подчёркивают необходимость комплексного подхода к выбору крепежных элементов, учитывающего механические, экологические и энергетические требования. Результаты испытаний и моделирования предоставляют проектировщикам основу для оптимизации фасадных систем, особенно в условиях строгих стандартов энергоэффективности. В перспективе необходимо дальнейшее исследование с разработкой систем крепежных решений, выдерживающих циклические и гравитационные нагрузки, сочетающих прочность металла, для повышения долговечности и функциональности вентилируемых фасадов.
- 5 May 2019
- Published by International University of Innovation Technologies in Science and Innovative Technologies
- p. 66-84
SITUATION OF DESIGN AND CONSTRUCTION FOR RETROFITTING OF BUILDINGS IN THEKYRGYZ REPUBLIC
There is a significant experience related to seismic retrofitting of existing buildings in many earthquake-prone regions of the world. Majority of older existing buildings were not designed to the seismic hazard level expected by current design codes; also, some structural types (like unreinforced masonry) are inherently more vulnerable to earthquake effects than others, e.g. well-designed reinforced concrete (RC) and steel buildings. It should be noted that seismic retrofitting of school buildings has been performed in several countries.It is proposed to effective strengthening of structures on the basis performance-design and pushover analyses, whis are an first time innovation for Kyrgyz Republic.
- 5 May 2019
- Published by International University of Innovation Technologies in Science and Innovative Technologies
- p. 66-84
SITUATION OF DESIGN AND CONSTRUCTION FOR RETROFITTING OF BUILDINGS IN THEKYRGYZ REPUBLIC
There is a significant experience related to seismic retrofitting of existing buildings in many earthquake-prone regions of the world. Majority of older existing buildings were not designed to the seismic hazard level expected by current design codes; also, some structural types (like unreinforced masonry) are inherently more vulnerable to earthquake effects than others, e.g. well-designed reinforced concrete (RC) and steel buildings. It should be noted that seismic retrofitting of school buildings has been performed in several countries.It is proposed to effective strengthening of structures on the basis performance-design and pushover analyses, whis are an first time innovation for Kyrgyz Republic.