SRSeetha Raghavan

Seetha Raghavan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Seetha Raghavan has a total of 107 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Space manufacturing: materials, mechanics and manufacturing

    by Aloke Kumar, Ranajay Ghosh, Seetha Raghavan

  • Shape memory and superelasticity in polycrystalline ceria-stabilized zirconia honeycombs

    by Laura K. Quinn, Remelisa Esteves, Perla Latorre-Suárez, George R. Rossman, Seetha Raghavan, Katherine T. Faber


  • Open Access

    Quantifying stress corrosion cracking performance of additively manufactured aluminum alloys via micro digital image correlation

    by Seetha Raghavan, Remelisa Esteves, Ranajay Ghosh

    Additive manufacturing (AM) has the capability to efficiently produce complex parts while saving manufacturing time and costs in industry. However, the AM process can also introduce defects within printed parts, which negatively impacts their performance during service life. Defects can reduce corrosion resistance in AM alloys. AlSi10Mg is a commercially available material for automotive and aerospace applications that is produced via powder bed fusion (PBF). While its mechanical behavior and characteristics have been studied extensively, there are contradictory conclusions on how the PBF process affects its corrosion perfor- mance. Consequently, its behavior under stress corrosion cracking (SCC) is not well understood. It was demonstrated in this work that AlSi10Mg had better SCC performance than its counterpart standard manufactured alloy, AA6061-T6. It was found that PBF AlSi10Mg experienced crack initiation 126 minutes later and withstood failure 18 minutes beyond its counterpart AA6061-T6. At failure, PBF AlSi10Mg experienced three times less strain. This work presents a unique capa- bility of correlating SCC performance in AM alloys to SCC initiation captured via micro digital image correlation (DIC). The results provide useful informa- tion on how AM alloys behave under SCC as a function of time and strain. This information can aid in improving or developing new AM processes for producing reliable and corrosion-resistant alloys.


  • Investigation of Stress Corrosion Cracking via in-situ Measurements

    by Remelisa Esteves, Nicholas Reed, Zachary Stein, Quentin Fouliard, Ranajay Ghosh, Seetha Raghavan

    View Video Presentation: https://doi.org/10.2514/6.2023-0182.vid Degradation of aircraft structural integrity due to corrosion damage is one challenge that leads to high costs in equipment and maintenance, which affects operation and safety of aircraft. Stress corrosion cracking (SCC) is a commonly observed phenomenon in aircraft materials, especially for high-strength aluminum alloys, that is exacerbated by residual tensile stresses from manufacturing and treatment processes and is affected by operation loads and forces in addition to the build-up of corrosion by-products. Research to elucidate and mitigate corrosion has benefited from considerable advances in tracking the kinetics of corrosion in aluminum alloys over the years. However, the key initiation mechanisms of SCC have yet to be understood at multiple scales. Here we show initial micro digital image correlation (DIC) results from an in-situ SCC test on aluminum alloy 7075-T6 that demonstrate crack initiation and propagation and correlation with strain measurements. The results show that strain evolution was captured as the sample was subjected to ten- sile load and SCC progressed. Qualitative comparison between the micro-DIC results and microscopy images shows that micro-DIC can detect early signs of cracking due to SCC. Correlations of material exposure time to a corrosive environment and load with initia- tion at small scales can provide data for developing strategies for corrosion control and development of new and improved alloys or heat treatment. The findings of this work can potentially help extend the life of alloys used on aircraft and, consequently, improve the reusability and fatigue life of aircraft. 0Both Remelisa Esteves and Nicholas Reed contributed equally to this work. †Graduate Student, Mechanical and Aerospace Engineering, University of Central Florida, AIAA Student Member ‡Graduate Student, Aerospace Engineering, Embry-Riddle Aeronautical University §Graduate Student, Mechanical and Aerospace Engineering, University of Central Florida, AIAA Student Member ¶Postdoctoral Fellow, Mechanical and Aerospace Engineering, University of Central Florida, AIAA Member ‖Professor, Mechanical and Aerospace Engineering, University of Central Florida ∗∗Professor, Mechanical and Aerospace Engineering (Joint appointments CREOL and MSE, Affiliated with CATER, NSTC), University of Central Florida, AIAA Associate Fellow, [email protected] 1 of 8 American Institute of Aeronautics and Astronautics


  • Open Access

    In-situ optical monitoring of gas turbine blade coatings under operational extreme environments

    by Seetha Raghavan, Ranajay Ghosh, Quentin Fouliard

    High temperature material systems consisting of thermal barrier coatings and the underlying superalloys are key to achieving higher gas temperatures which in turn control engine efficiencies and reduce emissions. With engine temperatures in excess of the limits that metallic blades and vanes can endure, advanced monitoring techniques that ensure the integrity and durability of these coatings are paramount to continuous and safe operation. Optical methods have the benefit of being non-invasive and are able to capture data under limited access available for monitoring the hot-section of turbines. Addressing Topic 5 on Advanced Instrumentation, the research and development effort for this project titled “In situ optical monitoring of gas turbine blade coatings under operational extreme environments” was completed by University of Central Florida researchers, including Raghavan (PI) and Ghosh (co-PI). In this project, the research team leveraged intrinsic properties of coatings and rare-earth dopants as active and intelligent “sensors” through their optical properties. The outcomes of this project pave the way for diagnostics of turbine blade coatings, under operating environments, through the development of the sensing thermal barrier coating configurations, calibration and associated instrumentation while ensuring coating integrity and durability goals are concurrently met.

  • Thermally Grown Oxide Stress in PS-PVD and EB-PVD Thermal Barrier Coatings Observed at Various Lifetimes Via Synchrotron X-ray Diffraction

    by Matthew Northam, Quentin Fouliard, Linda Rossmann, Jun-Sang Park, Peter Kenesei, Jonathan Almer, Vaishak Viswanathan, Bryan Harder, Seetha Raghavan

    The current standard application method for thermal barrier coatings (TBCs) on turbine blades for jet engines is electron-beam physical vapor deposition (EB-PVD) due to its high strain tolerance and low thermal conductivity. An emerging deposition method, plasma-spray physical vapor deposition (PS-PVD), presents an opportunity for a tailorable microstructure, and non-line-of-sight deposition that is faster and less expensive. To compare the lifetime behavior of both PS-PVD and EB-PVD coatings, samples subjected to 300 and 600 thermal cycles were measured during a 1 h thermal cycle to determine the strains, which were converted to stress, in the thermally grown oxide (TGO) layer of the TBCs using synchrotron X-ray diffraction (XRD). Room temperature XRD measurements indicated among samples that PS-PVD coatings experienced greater variation in in-plane room temperature strain in the TGO after cycling than the EB-PVD coatings. In-situ XRD measurements indicated similar high-temperature strain and no spallation after 600 thermal cycles for both coatings. Microscopy imaging after cycling showed greater rumpling in PS-PVD coatings that led to different failure modes between the two coatings’ TGO layers. The tailorability of PS-PVD coatings allows for adjustments in the processing parameters to improve their overall performance after aging and bridge the differences between the two deposition methods.


  • Effect of sintering temperature on microstructure and mechanical properties of molded Martian and Lunar regolith

    by Peter Warren, Nandhini Raju, Hossein Ebrahimi, Milos Krsmanovic, Seetha Raghavan, Jayanta Kapat, Ranajay Ghosh


  • Open Access

    Effect of Sintering Temperature on Microstructure and Mechanical Properties of Molded Martian and Lunar Regolith

    by Peter Warren, Nandhini Raju, Hossein Ebrahimi, Milos Krsmanovic, Seetha Raghavan, Jayanta Kapat, Ranajay Ghosh

    Cylindrical specimens of Martian and Lunar regolith simulants were molded using a salt water binder and sintered at various temperatures for comparing microstructure, mechanical properties and shrinkage. Material microstructure are reported using optical microscope and material testing is done using an MTS universal testing machine. The experimental protocol was executed twice, once using Mars global simulant (MGS-1), and once using Lunar mare simulant (LMS-1). The specimens were fabricated via an injection molding method, designed to replicate typical masonary units as well as the green stage of Binder Jet Technique, an important additive manufacturing (AM) technique. Results show that for both the Martian and Lunar regolith that the optimal sintering temperature was somewhere between 1100 C and 1200 C. The compressive strength for both the Martian and Lunar masonary samples, that received optimal sintering conditions, was determined to be sufficient for construction of extraterrestrial structures. The work demonstrates that both the Martian and Lunar regolith show potential to be used as extra terrestrial masonary and as parent material for extra terrestrial BJT additive manufacturing processes.