CMCaetano Rodrigues Miranda

Caetano Rodrigues Miranda

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Caetano Rodrigues Miranda has a total of 177 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Time-Resolved Synchrotron-Based Investigation of Reactive Pore Evolution in Sandstone for CO 2 Storage

    by Aluizio J. Salvador, Jessica Santos Rego, Jeann C. Rodrigues AraújO, Isabella F. Santos Miranda, Colombo C. Gaeta Tassinari, Nathaly Lopes Archilha, Caetano Rodrigues Miranda

    Understanding mineral dissolution in heterogeneous porous media is critical for predicting the evolution of subsurface systems during geological CO2 storage. Here, we integrate time-resolved synchrotron techniques, 4D X-ray microtomography (μ-CT), X-ray fluorescence (TR-XRF), and X-ray diffraction (TR-XRD) to investigate acid-induced dissolution in cemented sandstone from the Rio Bonito Formation in the Paraná Basin (South America) across multiple spatial scales. The results reveal that dissolution is strongly controlled by mineralogical heterogeneity and fluid accessibility, resulting in spatially localized, temporally evolving reaction fronts. Carbonate cement (calcite) dissolves rapidly under acidic conditions, as evidenced by a sharp depletion of the Ca signal (TR-XRF) and a continuous reduction in diffraction intensity (TR-XRD), driving early-stage porosity enhancement observed by μ-CT. In contrast, silicate phases (microcline) exhibit slower, surface-limited dissolution accompanied by partial structural modification, while quartz remains comparatively unreactive under the investigated conditions and experimental time frame. Dissolution rates show an exponential dependence on pH, confirming the dominant role of proton activity in controlling reaction kinetics. This behavior has direct implications for predicting injectivity evolution and geochemical buffering during the early stages of CO2 injection. Integrating structural, chemical, and mineralogical observations establishes a mechanistic link between phase-specific reactivity and pore-scale evolution. These findings highlight the importance of reservoir mineralogy, petrophysical properties, and diagenetic history in governing reactive transport processes. The results provide experimental constraints for reactive transport models addressing permeability evolution and early-stage geochemical alteration in CO2 storage systems.

  • Open Access

    Nickel–Zinc Catalysts Favor CO Production via Carbide Formation in CO2 Hydrogenation

    by NágIla E. C. Maluf, Maitê L. Gothe, Adriano H. Braga, Laís R. Borges, Pedro Vidinha, Alvaro D. Torrez-Baptista, Caetano R. Miranda, JánOs Szanyi, Renato V. GonçaLves, Liane M. Rossi

    Achieving high CO selectivity in CO2 hydrogenation with non-noble metal catalysts remains challenging. Here, we report a simple and cost-effective in situ synthesis of nickel–zinc carbide (Ni3ZnC) from Ni species supported on ZnO under reaction conditions. A higher amount of Ni3ZnC forms in the calcined NiO/ZnO catalyst compared to the prereduced Ni/ZnO system. Thermodynamic analysis reveals a strong driving force for Ni3ZnC formation via NiO/ZnO coreduction (ΔE ≈ −455 kJ mol–1), which is more exothermic than the metallic Ni pathway due to favorable H2O stoichiometry. Density functional theory calculations show that the carbide phase moderates surface reactivity. CO becomes geometrically trapped and isolated from hydrogen due to site blocking by Zn and C atoms. This combination of weakened adsorption and site confinement suppresses deep hydrogenation, leading to high CO selectivity over methanation. This strategy provides a practical route for designing selective reverse water–gas shift catalysts for tandem reaction pathways to liquid fuel synthesis.

  • Open Access

    Stochastic Modeling of Collective Social and Climate-Change Sentiment Dynamics on Social Media

    by Miguel Alfredo Vera Moreno, Caetano Rodrigues Miranda

    Online climate-change discourse, proxied by monthly counts of sentiment-classified Portuguese-language posts, combines bounded growth with fluctuations whose amplitude scales with the level of activity. We model this dynamics through a stochastic logistic equation with multiplicative diffusion, $g(x)=1+\lambda x^{2}$, interpreted within the generalized Stratonovich prescription. The stationary probability density has power-law tails, $P_{\rm st}(x)\sim x^{4\alpha-4}$, whose exponent is set by the stochastic prescription alone; at $\alpha=1/2$ the mean diverges logarithmically, so that the observed plateau corresponds to the mode of a heavy-tailed distribution lying below the carrying capacity and not to a deterministic equilibrium, and robust estimators are needed to characterize the process. Simulated ensembles reproduce the analytical density, and the observed plateau is consistent with it, the medians differing by $2.0\%$ and $4.0\%$ at $n=48$; since the carrying capacity is estimated from a record that includes the plateau, this agreement is one of internal consistency and not of independent validation. Model trajectories are then used to train an LSTM network and a Bayesian structural time-series model, whose learned components are kept blind to the test window; both yield near-nominal coverage with limited point accuracy. As a proof of concept, the framework shows how a stochastic model validated through its stationary distribution can supply dynamically consistent synthetic data to statistical and machine-learning predictors.

  • Open Access

    Struct2ML: End-to-End Prediction of Electronic Charge Densities Using 3D U-Net

    by João Victor Vilela Cassiano, Marcel ValérIo de Arruda, Alvaro David Torrez-Baptista, Caetano Rodrigues Miranda

    We present Struct2ML, a scalable, low-latency volumetric inference pipeline that predicts three-dimensional electronic charge densities directly from atomic configurations. By leveraging a 3D U-Net architecture, our method provides a surrogate route to approximate charge-density fields without performing a full self-consistent Kohn–Sham calculation for each queried structure, mapping multichannel structural descriptors with explicit periodic-boundary handling to volumetric charge fields. Unlike graph-based approaches that often require complex basis functions to reconstruct continuous fields, our grid-based representation maintains a computational complexity ofO(N), offering a natural interface for large-scale periodic and molecular systems optimized for real-time analysis. Key contributions include (i) scalable infrastructure, a high-throughput disk-to-GPU streaming dataloader optimized for terabyte-scale HDF5 archives, ensuring efficient training on massive data sets; (ii) robust training protocol, a reproducible workflow featuring automated voxel normalization, physics-informed multiobjective loss functions, and rigorous checkpointing; and (iii) multi-domain validation, a comprehensive evaluation suite providing both voxel-wise quantitative metrics and qualitative spatial analysis tailored for charge-density comparison. By substantially reducing the inference time to the millisecond scale (1–10 ms), this framework enables real-time charge-density exploration that reproduces key spatial and topological features of reference density functional theory (DFT) densities with data set-dependent accuracy, serving as a high-throughput utility complementary to equivariant models that primarily target static, maximal accuracy.

  • Open Access

    Exploring multiscale modelling combined with machine learning: from electronic structure to pore-scale dynamics in complex materials

    by Alexsandro Kirch, Alvaro D. Torrez-Baptista, Wagner W. R. Araujo, Alberto Torres, Dan Ni Lin, Gustavo Moriel Oliveira, Caetano R. Miranda


  • Open Access

    Effects of van der Waals Interaction on N 2 Adsorption on Carbon Nanotubes: Proposal for New Force Field Parameters

    by Carlos Alberto Martins Junior, Henrique Musseli Cezar, Daniela Andrade Damasceno, Caetano Rodrigues Miranda

    The separation of carbon dioxide (CO2) from nitrogen gas (N2) in flue gas has become an emerging strategy to mitigate climate change. Molecular simulations are valuable to provide insights for the gas separation process. A careful choice of force fields is required to avoid unrealistic predictions of thermodynamic properties. Most studies use Lorentz–Berthelot combining rules (LB) to obtain the interaction between different species. In this context, we verified how accurate LB is in describing the interaction of N2 molecules and carbon nanostructures by comparing the interaction energies of LB with those from density functional theory (DFT) calculations. Carbon nanomaterials were selected because they are considered promising materials to perform N2/CO2 separation. The results show that the LB underestimates the interaction energies and affects the prediction of the fundamental properties of solid–fluid interfacial interactions. To overcome this, we parametrized a Lennard–Jones potential using DFT and considering van der Waals interactions. The proposed potential shows good transferability and agreement with ab initio calculations. Molecular simulations were performed to verify the effects of employing LB in predicting the amount of nitrogen gas adsorbed in carbon nanotubes (CNTs). LB predicts a lower density within them. Our results suggest that LB leads to different adsorption properties.

  • Open Access

    Bayesian Optimization for High-Dimensional Coarse-Grained Model Parameterization: A Case Study on Pebax Polymer

    by Carlos A. Martins, Daniela A. Damasceno, Keat Yung Hue, Caetano Rodrigues Miranda, Erich A. Müller, Rodrigo A. Vargas-Hernández

    Coarse-grained (CG) force field models are extensively utilized in material simulations because of their scalability. Ordinarily, these models are parametrized using hybrid strategies that sequentially integrate top-down and bottom-up approaches. However, this combination restricts the capacity to jointly optimize all parameters. Although Bayesian optimization (BO) has been explored as an alternative search strategy to identify well-optimized CG parameters, its application has conventionally been limited to low-dimensional scenarios. This has contributed to the assumption that BO is unsuitable for more complex CG models, which often involve a large number of parameters. In this study, we challenge this assumption by successfully extending BO, using the tree-structured Parzen estimator (TPE) model, to optimize a high-dimensional CG model. Specifically, we show that a 41-parameter CG model of Pebax-1657, a copolymer composed of alternating polyamide and polyether segments, can be effectively parametrized using BO, resulting in a model that accurately reproduces the key physical properties of its parent atomistic representation. Our optimization framework simultaneously targets structural and thermodynamic properties, namely, density, radius of gyration, and glass transition temperature. Compared to traditional search algorithms, BO-TPE not only converges faster but also delivers consistent improvements over more standard parametrization approaches.


  • Open Access

    Intercalation Performance and Degradation of LiMn2O4 Supported on Vitreous Carbon Foam to Recover Lithium from Highly Concentrated Brines

    by Lorenzo A. D’aNgelo, Victor Sumikawa, Antonio Esio Bresciani, Caetano Rodrigues Miranda, Claudio A. Oller Do Nascimento, Andressa Mota-Lima

    The use of lithium intercalation electrodes (LIE) for recovering lithium from geothermal sources (containing ≤ 400 ppm of lithium) has the potential to revolutionize the lithium mining industry. This work proposes a conceptual scaled-up process for LIE, utilizing concentrated brine of 15 m3 h−1 (384.32 mM or 2,666 ppm of lithium) obtained from a reverse osmosis unit. Given the high lithium concentration in the concentrated brine, testing LIE performance under high lithium content conditions (1 M LiCl) is essential. In this study, LiMn2O4 supported on vitreous carbon foam is evaluated as the positive electrode. Degradation of the intercalation-active material, LiMn2O4, was observed in acidic media, with significant manganese dissolution. In contrast, at near neutral pH, dissolution rate is considered lower. Faradaic efficiency in acid media showed 98% efficiency only during the first potentiostatic deintercalation run. Subsequent runs exhibited non-faradaic behavior, which was also attributed to manganese dissolution. To develop strategies for mitigating LiMn2O4 degradation, equilibrium diagrams for the Li-Mn-H2O system (Poubaix Diagram) was constructed. In addition to propose a scaled-up process for lithium recovery from geothermal sources, this work investigates the performance of lithium intercalation under conditions relevant to large-scale operations.

  • Open Access

    Charge Effects on the Adsorption of Octanoic Acid and Octanoate at Carbonates

    by James Moraes de Almeida, Bruno Fedosse Zornio, Alvaro David Torrez Baptista, Caetano Rodrigues Miranda

    In this work, we investigate the adsorption behavior of protonated and deprotonated acids on carbonate surfaces, employing density functional theory (DFT) simulations and the self-consistent potential correction (SCPC) for the charged deprotonated acid. By comparing the coadsorption models with the SCPC method, we have observed significant differences in the adsorption energies, indicating that coadsorption underestimates the stability of the acid–carbonate interactions, even leading to changes from favorable to unfavorable adsorption on magnesites. Our study highlights the distinct chemical interactions of protonated and deprotonated acids with carbonate surfaces, revealing a more covalent bonding nature for protonated acids and a predominantly ionic character for deprotonated acids. Hence, we highlight the importance of employing charge correction methods, such as the SCPC, for a more accurate representation of the adsorption of charged molecules on mineral surfaces, which could be extended to other systems.


  • Open Access

    Mechanical Properties of Polyethylene/Carbon Nanotube Composites from Coarse-Grained Simulations

    by Daniela A. Damasceno, Keat Yung Hue, Caetano R. Miranda, Erich A. Müller

    Advanced nanocomposite membranes incorporate nanomaterials within a polymer matrix to augment the mechanical strength of the resultant product. Characterizing these membranes through molecular modeling necessitates specialized approaches to accurately capture the length scales, time scales, and structural complexities inherent in polymers. To address these requirements, an efficient simulation protocol is proposed, utilizing coarse-grained (CG) molecular dynamics simulations to examine the mechanical properties of polyethylene/single-walled carbon nanotube (PE/SWCNT) composites. This methodology integrates CG potentials derived from the statistical associating fluid theory (SAFT-γ Mie) equation of state and a modified Tersoff potential as a model for SWCNTs. A qualitative correspondence with benchmark classical all-atom models, as well as available experimental data, is observed, alongside enhanced computational efficiency. Employing this CG model, the focus is directed at exploring the mechanical properties of PE/SWCNT composites under both tensile and compressive loading conditions. The investigation covered the influence of SWCNT size, dispersion, and weight fraction. The findings indicate that although SWCNTs enhance the mechanical strength of PE, the extent of enhancement marginally depends on the dispersion, filler size, and weight fraction. Fracture strengths may be elevated by 20% with a minor incorporation of SWCNTs. Under compression, the incorporation of SWCNTs into the composites results in a transformation from brittle to tough materials. These insights contribute to the optimization of PE/SWCNT composites, emphasizing the importance of considering multiple factors to fine-tune the desired mechanical performance.