Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sergei Rudenko has a total of 143 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Benchmarks for Assessment of Different Terrestrial Reference System Realizations: Insights of the IAG-IERS Joint Working Group 1.2.4

    by Sergei Rudenko, Guilhem Moreaux, Andreja Susnik, Anton Reinhold, Susanne Glaser, Dimitrios Ampatzidis, Lisa Klemm, Daniela Thaller, Manuela Seitz, Mathis Bloßfeld

    The IAG-IERS Joint Working Group 1.2.4 (JWG1.2.4) “Evaluation of the Terrestrial Reference Frames” focuses on evaluating global and regional Terrestrial Reference System (TRS) realizations, with particular emphasis on identifying and quantifying systematic differences. A key outcome of the working group is the definition of a set of benchmarks for assessing the quality and consistency of reference frames. These benchmarks allow systematic comparisons of International Terrestrial Reference System (ITRS) realizations, helping to quantify differences in station positions, their time series behavior, and velocities. They also provide metrics to assess the impact of geophysical models, such as loading displacements, performance of space-geodetic techniques, as well as precise orbit determination of satellites. By applying these benchmarks to current ITRS realizations, the working group can identify systematic patterns, evaluate stability over time, and support informed interpretation of reference frame solutions. The benchmarks are intended to serve as a practical tool for the broader geodetic and scientific community, offering guidance and objective information to help users to assess the quality and consistency of different ITRS realizations for high-precision positioning, Earth observation, and geophysical applications. The paper presents selected benchmarks, such as investigation of the network completeness, analysis of station velocity and discontinuities, local tie residuals, Helmert transformation parameter time series and cross-correlations, station position residuals, comparison with external TRS realizations, and technique-specific analyses. We illustrate the application of some of them to the latest (ITRS 2020) realizations and their updates and discuss the insights gained from these analyzes.

  • Open Access

    Impact of Earth’s Mean Time-Variable Gravity Field Models on Precise Orbits of Altimetry Satellites

    by Sergei Rudenko, Denise Dettmering, Jean-Michel Lemoine, Mathis Bloßfeld, Julian Zeitlhöfler

    Gravitational forces are the major forces acting on near-Earth orbiting (e.g., altimetry) satellites. We perform a review of Earth’s mean time-variable gravity (TVG) field models developed in the past 23 years (2000–2023). This includes the models developed using CHAMP, GRACE, GRACE-FO, GOCE, SLR (Satellite Laser Ranging), and DORIS measurements. Some of these models contain just secular terms, while more recent models include also periodic (annual and semi-annual) variations of the Earth’s gravity. We show the impact of these models on precise orbit determination (POD) of selected altimetry satellites, namely TOPEX/Poseidon, Jason-1, Jason-2, and Jason-3 at the time interval from 1992 to 2023. The impact of these models is assessed for different orbit parameters as well as the root-mean-square (RMS) and mean values of SLR observation residuals and orbit differences. Furthermore, the impact of these models on altimetry (single- and multi-satellite) sea surface height crossover differences, radial errors, geographically correlated mean errors, and their trends is analyzed. We have found that the CNES RL05MF model derived using data of 1985–2022 performs best among the models tested in this study, particularly for the Jason-3 time span (2016–2023). Using this model reduces the RMS values of SLR observation residuals from 2.56 cm (for pre-CHAMP model GRIM5-C1) to 1.48 cm for this satellite. The RMS values of orbit differences in the radial direction fit within 0.7–0.8 cm for most recent TVG models, while using old GRIM5-C1 would result in 1.9 cm differences. It is important to reprocess regularly Earth’s TVG data covering the longest time span to minimize extrapolation errors of the models.

  • Open Access

    Determination of an SLR terrestrial reference frame and Earth Rotation Parameters from SLR observations to altimetry and spherical geodetic satellites

    by Sergei Rudenko, Mathis Bloßfeld, Manuela Seitz, Julian Zeitlhöfler

    The contribution of the International Laser Ranging Service (ILRS) to the latest International Terrestrial Reference System (ITRS) realizations is based on Satellite Laser Ranging (SLR) observations of just four spherical satellites (LAGEOS-1/2 and Etalon-1/2). Since 2025, one more spherical satellite (LARES-2) is used by the ILRS to determine global geodetic parameters such as coordinates and velocities of globally distributed SLR stations and Earth Rotation Parameters (ERP), namely x- and y-pole coordinates and length of day (LOD). However, SLR observations to eight more spherical satellites (Starlette, Ajisaj, Stella, GFZ-1, WESTPAC, Larets, BLITS, LARES) and several altimetry satellites are available over an overall time span from 1976 with the total number of their SLR observations exceeding the number of SLR observations of the five presently used satellites by a factor of about five. Orbits of these satellites have various altitudes and inclinations and can be determined at the 1-2 centimeter level of accuracy. The long observational time series and the differing orbital characteristics of the satellites lead to an improved SLR observation geometry.In this study, we investigate the potential of using SLR observations of seven altimetry satellites (TOPEX/Poseidon, Jason-1/-2/-3, Sentinel-3A/-3B/6A) for the determination of global geodetic parameters mentioned above, as compared to using SLR observations of five and 13 spherical satellites and in combination with them.

  • Open Access

    DTRF2020: The ITRS 2020 realization of DGFI-TUM

    by Manuela Seitz, Mathis Bloßfeld, Matthias Glomsda, Detlef Angermann, Sergei Rudenko, Julian Zeitlhöfler, Florian Seitz

    DTRF2020 is the latest realization of the International Terrestrial Reference System (ITRS) by DGFI-TUM and is based on the same input data as ITRF2020. It is generated using the DGFI-TUM two-step combination approach, combining cumulative normal equations from the individual techniques GNSS, SLR, VLBI and DORIS. DTRF2020 introduces three key innovations: (1) it is the first secular ITRS realization with scale determined jointly from VLBI and GNSS; (2) it applies non-tidal loading corrections from atmospheric, oceanic, and hydrological models; and (3) it models post-seismic deformation using logarithmic and exponential functions. In addition to SINEX and EOP files, DTRF2020 provides all information required to compute instantaneous station positions: non-tidal loading reductions, post-seismic deformation models, residual and translations time series. Non-tidal loading corrections reduce GNSS height RMS for 99% of stations and significantly decrease annual signals in translation and scale. DTRF2020 agrees well with DTRF2014. Compared to ITRF2020, transformation differences reach up to 3.1 mm in position and 0.13 mm/yr in velocity for GNSS, VLBI, and SLR, and below 4.6 mm and 0.27 mm/yr for DORIS. Height velocities are consistent with GIA and CMR-based models, with regional differences within ± 3 mm/yr.


  • Open Access

    Impact of SLR long-term mean range biases on SLRF2020-based orbits of altimetry satellites

    by Sergei Rudenko, Mathis Bloßfeld, Alexander Kehm, Denise Dettmering, Julian Zeitlhöfler

    In 2022 and 2023, the new (2020) realizations of the International Terrestrial Reference System (ITRS), namely ITRF2020, JTRF2020, and DTRF2020, were published. One of the differences of these realizations as compared to the previous (2014) ones is the application of Satellite Laser Ranging (SLR) station- and satellite-specific long-term mean range biases (RBs) for the four geodetic satellites LAGEOS-1/-2 and Etalon-1/-2. These RBs were subtracted from the SLR observations used to compute the official ILRS (International Laser Ranging Service) contribution to the ITRS 2020 realizations. This strategy leads to the research question, whether these RBs should and can be applied in SLR-observation-based precise orbit determination (POD) for any satellite to obtain the highest orbit quality possible while using an ITRS 2020 realization as a priori reference frame. In this paper, based on the POD results for four altimetry satellites (TOPEX/Poseidon, Jason-1, Jason-2, and Jason-3) over the total time interval 1992-2021 and single- as well as multi-satellite altimetry crossover analyses for Jason-2 (2008-2019), we show that the application of LAGEOS-1 long-term mean RBs and the estimation of RBs for certain stations and time spans according to the ILRS Data Handling File (DHF) for SLRF2020 (DHF2020) reduces the root-mean-square fits of SLR observations, scatter of estimated empirical accelerations in along- and cross-track directions, as well as standard deviations of single-satellite crossover differences, and thus improves the orbit quality of all tested altimetry satellites. Consequently, we conclude that the DHF2020 can be used also for any other satellite than LAGEOS-1. However, since the RBs are not only station- but also satellite-dependent, optimal results might be achieved by determining SLR long-term mean RBs for all SLR-tracked satellites and by using the RBs in the POD of these satellites. The smallest residuals of SLR observations and the best orbit quality (smallest values of the standard deviations of single-satellite crossover differences) are obtained, when arc-wise RBs are estimated for each station. However, one should be careful with applying the latter approach, since frequently (i.e. with a high temporal resolution) estimated biases in the radial direction absorb, beside SLR measurement errors and system delays, also non-modeled or not-perfectly modeled geophysical signals (e.g., non-tidal station loading) which might be of particular importance for some analysis. Graphical Abstract


  • Open Access

    DTRF2020_u2023: The Update of DTRF202

    by Manuela Seitz, Mathis Bloßfeld, Sergei Rudenko, Julian Zeitlhoefler, Detlef Angermann

    To update the ITRS 2020 realizations which are based on observations from the geodetic space techniques VLBI, SLR, GNSS and DORIS until the end of 2020, the ITRS Product Center asked the Technique Centers (TCs) for an extension of these series by as consistent as possible operational series. However, the GNSS input series which formerly realized an own GNSS scale, the full history of data was recomputed by the IGS TC by adopting the ITRF2020 scale based on the VLBI and SLR scale contributions.DTRF2020, calculated by DGFI-TUM, realizes the scale from VLBI and GNSS contributions and thus needs for its update IGS/GNSS series realizing the GNSS scale. Therefore, the IGS TC provided, in addition, an extension series consistent to the input series for the ITRS 2020 realization. Moreover, the GGFC provided extensions of the previous non-tidal loading (NTL) displacement time series as well as time series for new stations to be used in the DTRF2020 update to reduce non-linear station motions.We extended the DTRF2020 by using the provided extension series and the NTL input data until 2023. We analyzed the extended station position, datum parameter (origin and scale) and Earth Orientation Parameter time series, introduced additional discontinuities and accounted for post-seismic deformation of stations affected by earthquakes.We present the DTRF2020 update solution (i.e. DTRF2020-u2023) and discuss the consistency of the former and the extension series. In addition, we discuss the results of comparisons of the updates computed by the three ITRS Combination Centers, which reflect the internal accuracy achieved by today's ITRS realizations.

  • Open Access

    First results of the analysis of the input data series provided by the IAG technique services for the extension of xTRF202

    by Manuela Seitz, Mathis Bloßfeld, Matthias Glomsda, Detlef Angermann, Sergei Rudenko, Julian Zeitlhöfler

    The latest realizations of the ITRS, specifically the ITRF2020, the JTRF2020 and the DTRF2020, have been computed using input data series provided by the IAG technique services IVS, ILRS, IGS and IDS. They cover the entire observation period of the individual techniques until the end of 2020. Since 1996, recalculations of the ITRF have been performed approximately every 3 to 6 years. The main reason for recalculation is to ensure a high accuracy of the ITRF for current applications. In particular, seismic events that occure after an ITRF release as well as the general increase of the ITRF extrapolation error with time are key factors that cause the increase of the ITRF uncertainty. To enhance the frequency of ITRS realizations and consequently improve the accuracy of the ITRF, the ITRS Product Center plans to calculate annual updates of the ITRF2020 starting in 2024. The IAG technique services will provide three additional years of analyzed observations (2021-2023) collected after the end of the ITRF2020 observation period in February 2024. As an ITRS Combination Center, at DGFI-TUM, we will analyze the data series w.r.t. discontinuities, post-seismic deformations and their consistency with the input data series provided for the ITRS 2020 realizations. Model changes performed in between by the individual technique services, e.g. new PCO (phase center offsets) for GNSS satellites, updated mean long-term range biases for SLR satellites or gravitational deformation models for some more VLBI antennas, are expected to have an impact on the relevant ITRF parameters (station coordinates, EOP and datum parameters). Its order of magnitude and the effect of possible inconsistencies on the DTRF solution need to be investigated. We will present the first results of our analyses and draw preliminary conclusions regarding the accuracy of a possible DTRF2020 extension.

  • Open Access

    Application of ITRS 2020 realizations for the SLR-based POD of selected geodetic and Earth-observing satellites

    by Mathis Bloßfeld, Julian Zeitlhöfler, Sergei Rudenko, Manuela Seitz

    Since 2023, three different solutions for the latest (2020) realization of the International Terrestrial Reference System (ITRS) are publicly available, namely the ITRF2020, the JTRF2020 and the DTRF2020. All solutions are based on the same input data but were derived using different combination approaches and data correction strategies. Since the ITRS realizations are used as a priori reference frames for precise orbit determination (POD) of Earth orbiting satellites, it is important to investigate the impact of the different frames on the POD results.In this study, we briefly introduce the different features of the ITRS realizations and elaborate how the data correction models (e.g., periodic variations vs. non-tidal loading corrections) of the different xTRF2020 solutions can be optimally applied for the POD of selected satellites tracked by Satellite Laser Ranging (SLR) stations. We conclude the study with results obtained for various orbital parameters, such as the scaling factor of the non-gravitational (non-conservative) accelerations as well as the estimated empirical accelerations. Finally, we summarize the optimal settings of each ITRS realization for the satellite PODs discussed in this paper (i.e., LAGEOS-1, LARES-2, Jason-1/2/3).


  • Open Access

    Impact of new Earth’s time-variable gravity field models on orbits of altimetry satellites

    by Sergei Rudenko, Denise Dettmering, Mathis Bloßfeld, Julian Zeitlhöfler

    Gravitational forces are the major forces acting on near-Earth orbiting (e.g., altimetry) satellites. Recently published Earth’s gravity field models used within the satellite precise orbit determination (POD) comprise observations of GRACE (Gravity Recovery And Climate Experiment) and GRACE-FO (GRACE-Follow-On), gravity field satellite missions between 2002 until 2017 and since 2018, respectively. In this presentation, we perform a review of selected Earth’s time-variable gravity field models developed in the past ten years (2014-2023). We analyze also the POD results obtained for selected altimetry satellites, namely, TOPEX/Poseidon, Jason-1, Jason-2, and Jason-3 at the time interval from 1992 to 2023 using various Earth’s gravity field models. A special focus is put on the CNES/GRGS mean gravity field models of releases 2 to 5, including the latest CNES_GRGS.RL05MF_COMBINED_GRACE_SLR_DORIS model. The impact of these models is assessed for different orbit parameters as well as the root-mean-square and mean values of Satellite Laser Ranging observation residuals and orbit differences. Furthermore, the impact of these models on altimetry (single- and multi-satellite) sea surface height crossover differences is investigated. From these crossover differences, radial errors and geographically-correlated mean errors are derived and analyzed. The results are used to conclude on the accuracy of current Earth’s time-variable gravity field models when used for the POD of altimetry satellites.

  • Open Access

    New website of the ITRS CC at DGFI-TUM: dtrf.dgfi.tum.de

    by Florian Seitz, Manuela Seitz, Mathis Bloßfeld, Matthias Glomsda, Detlef Angermann, Sergei Rudenko, Julian Zeitlhöfler

    The ITRS CC at the Deutsches Geodätisches Forschungsinstitut of the Technical University of Munich (DGFI-TUM) has created the new DTRF website https://dtrf.dgfi.tum.de. On this site, DGFI-TUM provides background information and data access to the current and all previous DTRF solutions. In particular, the DTRF2020 processing strategy is presented and the results are described and explained. In addition to the actual solution, the DTRF2020 release contains further datasets that are necessary for a highly accurate application of the DTRF2020. The website clearly presents and makes available all datasets, partly map-based. Our poster gives an overview of the new DTRF website and provides examples of its use.