Daniel J. Kontak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daniel J. Kontak has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
Douglas A. Archibald
Department of Geological Sciences and Geological Engineering, Queen's University, Kingston, ON K7L 3N6
2 shared publications- Elizabeth C. Turner
Harquail School of Earth Sciences, Laurentian University, Sudbury, ON P3E 2C6, Canada
2 shared publications - Iain M. Samson
School of the Environment, University of Windsor, Windsor, Canada
2 shared publications Jacob J. Hanley
Department of Geology Saint Mary's University Halifax NS Canada
2 shared publicationsKevin Ansdell
Department of Geological Sciences, University of Saskatchewan, 114 Science Place, Saskatoon, SK S7N 5E23
2 shared publications- Kurt Kyser
Queen’s University
2 shared publications
Latest Publications
- Open Access
Origin of Siderite and Baryte in a Carbonate-Replacement Ag-Pb-Zn-Cu Sulphide Deposit: Walton, Nova Scotia, Canada
Siderite and baryte are common non-sulphide phases in sedimentary exhalative (SEDEX) deposits, but their formation remains poorly understood. Siderite is important as an exploration vector in some deposits, whereas baryte is important as a S source in some deposits. The past-producing Walton deposit (Nova Scotia, Canada) consists of two ore types: (1) a sulphide body primarily hosted by sideritised Viséan Macumber Formation limestone (0.41 Mt; head grade of 350 g/t Ag, 4.28% Pb, 1.29% Zn, and 0.52% Cu), and (2) an overlying massive baryte body of predominantly microcrystalline baryte (4.5 Mt of >90% baryte). This study used optical microscopy, SEM-EDS, cathodoluminescence (CL), LA-ICP-MS, and SIMS sulphur isotope analysis of siderite and baryte to elucidate their origin and role in deposit formation. Siderite replaces limestone and contains ≤9 wt. % Mn, is LREE-depleted (PAAS-normalised REEY diagrams), and has low (200 °C) saline (25 wt. % NaCl) fluid containing CO2-CH4 and liquid petroleum. Marine sulphate δ34SVCDT values typical of the Viséan (~15‰) characterise the baryte body and some tabular baryte types, whereas heavier (~20‰) and lighter (~10‰) values typify the remaining tabular types. The variations in tabular baryte relate to distinct zones identified by CL imaging and are attributed to the sulphate-driven anaerobic oxidation of methane (SDAOM) and oxidation of excess H2S after sulphide precipitation. These results highlight the importance of hydrocarbons (methane and organic matter) in the formation of both the siderite and the baryte at Walton and that DIR and the SDAOM can be important contributing processes in the formation of SEDEX deposits.
Open AccessOrigin of Siderite and Baryte in a Carbonate-Replacement Ag-Pb-Zn-Cu Sulphide Deposit: Walton, Nova Scotia, Canada
Siderite and baryte are common non-sulphide phases in sedimentary exhalative (SEDEX) deposits, but their formation remains poorly understood. Siderite is important as an exploration vector in some deposits, whereas baryte is important as a S source in some deposits. The past-producing Walton deposit (Nova Scotia, Canada) consists of two ore types: (1) a sulphide body primarily hosted by sideritised Viséan Macumber Formation limestone (0.41 Mt; head grade of 350 g/t Ag, 4.28% Pb, 1.29% Zn, and 0.52% Cu), and (2) an overlying massive baryte body of predominantly microcrystalline baryte (4.5 Mt of >90% baryte). This study used optical microscopy, SEM-EDS, cathodoluminescence (CL), LA-ICP-MS, and SIMS sulphur isotope analysis of siderite and baryte to elucidate their origin and role in deposit formation. Siderite replaces limestone and contains ≤9 wt. % Mn, is LREE-depleted (PAAS-normalised REEY diagrams), and has low (200 °C) saline (25 wt. % NaCl) fluid containing CO2-CH4 and liquid petroleum. Marine sulphate δ34SVCDT values typical of the Viséan (~15‰) characterise the baryte body and some tabular baryte types, whereas heavier (~20‰) and lighter (~10‰) values typify the remaining tabular types. The variations in tabular baryte relate to distinct zones identified by CL imaging and are attributed to the sulphate-driven anaerobic oxidation of methane (SDAOM) and oxidation of excess H2S after sulphide precipitation. These results highlight the importance of hydrocarbons (methane and organic matter) in the formation of both the siderite and the baryte at Walton and that DIR and the SDAOM can be important contributing processes in the formation of SEDEX deposits.
- Open Access
Alteration Lithogeochemistry of an Archean Porphyry-Type Au(-Cu) Setting: The World-Class Côté Gold Deposit, Canada
Characterizing alteration and its geochemical signature provides critical information relevant to ore-deposit genesis and its related footprint; for porphyry-type deposits, zoned potassic-phyllic-propylitic alteration and metal enrichment are critical features. Here we integrate earlier lithological and mineralogical studies of the (10+ Moz Au) Archean Côté Gold porphyry-type Au(-Cu) deposit (Ontario, Canada) with identified alteration types to provide exploration vectors. The ca. 2740 tonalite-quartz diorite-diorite intrusive complex and co-temporal Au(-Cu) mineralization as disseminations, breccias and veins are co-spatial with ore-related alteration types (amphibole, biotite, muscovite). An early, locally developed amphibole event coring the deposit is followed by emplacement of a Au(-Cu) mineralized biotite-rich magmatic-hydrothermal breccia body and broad halo of disseminated biotite and quartz veining. These rocks record gains via mass balance calculations of K, Fe, Mg, LILE, and LREE with Au, Cu, Mo, Ag, Se and Bi. Later muscovite alteration is enriched in K, Rb, Cs, Ba, CO2, and LOI with varied Au, Cu, Mo, Te, As, and Bi values. A strong albite overprint records extreme Na gains with the loss of most other elements, including ore metals (i.e., Au, Cu). Together these data define an Au-Cu-Mo-Ag-Te-Bi-Se core co-spatial with biotite breccia versus a peripheral stockwork and sheeted vein zone with a Te-Se-Zn-Pb-As association. These features further support the posited porphyry-type model for the Côté Gold Au(-Cu) deposit.
Open AccessAlteration Lithogeochemistry of an Archean Porphyry-Type Au(-Cu) Setting: The World-Class Côté Gold Deposit, Canada
Characterizing alteration and its geochemical signature provides critical information relevant to ore-deposit genesis and its related footprint; for porphyry-type deposits, zoned potassic-phyllic-propylitic alteration and metal enrichment are critical features. Here we integrate earlier lithological and mineralogical studies of the (10+ Moz Au) Archean Côté Gold porphyry-type Au(-Cu) deposit (Ontario, Canada) with identified alteration types to provide exploration vectors. The ca. 2740 tonalite-quartz diorite-diorite intrusive complex and co-temporal Au(-Cu) mineralization as disseminations, breccias and veins are co-spatial with ore-related alteration types (amphibole, biotite, muscovite). An early, locally developed amphibole event coring the deposit is followed by emplacement of a Au(-Cu) mineralized biotite-rich magmatic-hydrothermal breccia body and broad halo of disseminated biotite and quartz veining. These rocks record gains via mass balance calculations of K, Fe, Mg, LILE, and LREE with Au, Cu, Mo, Ag, Se and Bi. Later muscovite alteration is enriched in K, Rb, Cs, Ba, CO2, and LOI with varied Au, Cu, Mo, Te, As, and Bi values. A strong albite overprint records extreme Na gains with the loss of most other elements, including ore metals (i.e., Au, Cu). Together these data define an Au-Cu-Mo-Ag-Te-Bi-Se core co-spatial with biotite breccia versus a peripheral stockwork and sheeted vein zone with a Te-Se-Zn-Pb-As association. These features further support the posited porphyry-type model for the Côté Gold Au(-Cu) deposit.
- Open Access
Geology, Petrology and Geochronology of the Late Cretaceous Klaza Epithermal Deposit: A Window into the Petrogenesis of an Emerging Porphyry Belt in the Dawson Range, Yukon, Canada
Geologic understanding of the richly mineralized Dawson Range gold belt (DRGB) in the central Yukon, Canada is hindered by: (1) limited outcrop exposure due to thick soil cover; and (2) low resolution age-constraints despite a long history of porphyry Cu–Au–Mo deposit (PCD) exploration. Here, the well-preserved Klaza Au–Ag–Pb–Zn porphyry–epithermal deposit is used as a type-example of Late Cretaceous magmatic–hydrothermal mineralization to address the complex metallogeny of the DRGB. U–Pb zircon dating defines four magmatic pulses of Late Triassic to Late Cretaceous ages with the latter consisting of the Casino (80–72 Ma) and Prospector Mt. (72–65 Ma) suites. The Casino suite has five phases of intermediate-to-felsic calc-alkaline composition, correspond with older (77 Ma) porphyry mineralization, and displays evidence of magma mingling. The intermediate-to-mafic, slightly alkalic Prospector Mt. suite shows evidence of mingling with the youngest Casino suite phases, correlates with younger (71 Ma), intermediate-sulfidation epithermal and porphyry-type mineralization, and shoshonitic basalts of the Carmacks Group. Zircon trace element data suggest a common melt source for these suites; however, the younger suite records features (e.g., high La/Yb) that indicate a higher pressure melt source. The results from this study highlight the Prospector Mt. suite as a historically overlooked causative magma event linked to Au-rich PCDs in the DRGB and extends the temporal window of PCD prospectivity in this area. The transition from mid-Cretaceous Whitehorse suite magmas to Late Cretaceous Casino-Prospector Mt. suite magmas is proposed to reflect a transition from subduction to localized extension, which is becoming more recognized as a common characteristic of productive porphyry belts globally.
Open AccessGeology, Petrology and Geochronology of the Late Cretaceous Klaza Epithermal Deposit: A Window into the Petrogenesis of an Emerging Porphyry Belt in the Dawson Range, Yukon, Canada
Geologic understanding of the richly mineralized Dawson Range gold belt (DRGB) in the central Yukon, Canada is hindered by: (1) limited outcrop exposure due to thick soil cover; and (2) low resolution age-constraints despite a long history of porphyry Cu–Au–Mo deposit (PCD) exploration. Here, the well-preserved Klaza Au–Ag–Pb–Zn porphyry–epithermal deposit is used as a type-example of Late Cretaceous magmatic–hydrothermal mineralization to address the complex metallogeny of the DRGB. U–Pb zircon dating defines four magmatic pulses of Late Triassic to Late Cretaceous ages with the latter consisting of the Casino (80–72 Ma) and Prospector Mt. (72–65 Ma) suites. The Casino suite has five phases of intermediate-to-felsic calc-alkaline composition, correspond with older (77 Ma) porphyry mineralization, and displays evidence of magma mingling. The intermediate-to-mafic, slightly alkalic Prospector Mt. suite shows evidence of mingling with the youngest Casino suite phases, correlates with younger (71 Ma), intermediate-sulfidation epithermal and porphyry-type mineralization, and shoshonitic basalts of the Carmacks Group. Zircon trace element data suggest a common melt source for these suites; however, the younger suite records features (e.g., high La/Yb) that indicate a higher pressure melt source. The results from this study highlight the Prospector Mt. suite as a historically overlooked causative magma event linked to Au-rich PCDs in the DRGB and extends the temporal window of PCD prospectivity in this area. The transition from mid-Cretaceous Whitehorse suite magmas to Late Cretaceous Casino-Prospector Mt. suite magmas is proposed to reflect a transition from subduction to localized extension, which is becoming more recognized as a common characteristic of productive porphyry belts globally.
- Open Access
An Archean Porphyry-Type Deposit: Cu-Au Mineralization Associated with the Chibougamau Tonalite–Diorite Pluton, Abitibi Greenstone Belt, Canada
The Neoarchean diorite- and tonalite-dominated Chibougamau pluton (Canada) is ideal for case studies dedicated to the petrogenesis and timing of emplacement of fertile magmatic systems and associated Cu-Au porphyry systems. Using whole-rock analyses, geochronology, and zircon chemistry, it is determined that an early magmatic phase (pre-2714 Ma) is derived from a dioritic magma with a moderate ƒO2 (ΔFMQ 0 to +1), which is optimal for transporting Au and Cu, and that diorite is a potentially fertile magma. Field descriptions indicate that the main mineralizing style consists of sulfide-filled hairline fractures and quartz–carbonate veins. This is likely the consequence of fluid circulation facilitated by a well-developed diaclase network formed following the intrusion of magma at about 4–7 km depth in a competent hosting material. The petrographic features of fluid inclusions (FIs), considered with their microthermometric data and evaporate mound chemistry, suggest the exsolution of early CO2-rich fluids followed by the unmixing of later aqueous saline fluids characterized by a magmatic signature (i.e., Na-, Ca-, Fe-, Mn-, Ba-, and Cl-F). The type of magmatism and its oxidation state, age relationships, the nature of mineralization, and fluid chemistry together support a model whereby metalliferous fluids are derived from an intermediate hydrous magma. This therefore enforces a porphyry-type metallogenic model for this Archean setting.
Open AccessAn Archean Porphyry-Type Deposit: Cu-Au Mineralization Associated with the Chibougamau Tonalite–Diorite Pluton, Abitibi Greenstone Belt, Canada
The Neoarchean diorite- and tonalite-dominated Chibougamau pluton (Canada) is ideal for case studies dedicated to the petrogenesis and timing of emplacement of fertile magmatic systems and associated Cu-Au porphyry systems. Using whole-rock analyses, geochronology, and zircon chemistry, it is determined that an early magmatic phase (pre-2714 Ma) is derived from a dioritic magma with a moderate ƒO2 (ΔFMQ 0 to +1), which is optimal for transporting Au and Cu, and that diorite is a potentially fertile magma. Field descriptions indicate that the main mineralizing style consists of sulfide-filled hairline fractures and quartz–carbonate veins. This is likely the consequence of fluid circulation facilitated by a well-developed diaclase network formed following the intrusion of magma at about 4–7 km depth in a competent hosting material. The petrographic features of fluid inclusions (FIs), considered with their microthermometric data and evaporate mound chemistry, suggest the exsolution of early CO2-rich fluids followed by the unmixing of later aqueous saline fluids characterized by a magmatic signature (i.e., Na-, Ca-, Fe-, Mn-, Ba-, and Cl-F). The type of magmatism and its oxidation state, age relationships, the nature of mineralization, and fluid chemistry together support a model whereby metalliferous fluids are derived from an intermediate hydrous magma. This therefore enforces a porphyry-type metallogenic model for this Archean setting.
- Open Access
- 29 November 2024
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 25 (12)
Auriferous Fluid Evolution and the Role of Carbonaceous Matter in a Saddle‐Reef Gold Deposit: Dufferin Deposit, Meguma Terrane, Nova Scotia, Canada
The metaturbidite‐hosted, ∼380 Ma Dufferin gold deposit, Meguma terrane, northeastern Appalachian Orogen (Nova Scotia, Canada) is an orogenic gold deposit with mineralized saddle reef‐type quartz veins hosted by metasandstones and black slates in a tightly folded anticline. Together with native gold inclusions, genetically related hydrothermal carbonaceous material (CM) in veins occurs as pyrobitumen in cavities and along fractures/grain boundaries proximal to vein contacts and wallrock fragments. Integrating several microanalytical methods we document the precipitation of gold via coupled fluid‐fO2 reduction (via interaction with CM) and pH increase. These changes in fluid chemistry destabilized gold bisulfide complexes, leading to efficient Au precipitation from a gold‐undersaturated (0.045 ± 0.024 ppm Au; 1σ; n = 58 fluid inclusions) aqueous‐carbonic fluid (H2O‐NaCl‐CO2 ± N2 ± CH4). The proposed mineralization mechanism is supported by: (a) a complementary decrease in Au and redox‐sensitive semimetals (As, Sb), and increase in wall rock‐derived elements (i.e., Mg, K, Ca, Sr, Fe) concentrations in fluid inclusions with time; (b) a corresponding decrease in the XCO2, consistent with CO2 removal via reduction/respeciation and late carbonate precipitation; and (c) gold embedding in, or on, the surface of CM inside mineralized cavities and fractures. Despite mineralizing fluids transporting low concentrations of Au far from saturation, precipitation of gold was locally evidently high where such fluids interacted with CM, contributing to the overall gold endowment of Meguma deposits. This work re‐emphasizes CM as a potential prerequisite for efficient gold precipitation within the overall genetic model for similar orogenic metasedimentary settings globally where the presence and/or role of CM has been documented.
- 29 November 2024
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 25 (12)
Open AccessAuriferous Fluid Evolution and the Role of Carbonaceous Matter in a Saddle‐Reef Gold Deposit: Dufferin Deposit, Meguma Terrane, Nova Scotia, Canada
The metaturbidite‐hosted, ∼380 Ma Dufferin gold deposit, Meguma terrane, northeastern Appalachian Orogen (Nova Scotia, Canada) is an orogenic gold deposit with mineralized saddle reef‐type quartz veins hosted by metasandstones and black slates in a tightly folded anticline. Together with native gold inclusions, genetically related hydrothermal carbonaceous material (CM) in veins occurs as pyrobitumen in cavities and along fractures/grain boundaries proximal to vein contacts and wallrock fragments. Integrating several microanalytical methods we document the precipitation of gold via coupled fluid‐fO2 reduction (via interaction with CM) and pH increase. These changes in fluid chemistry destabilized gold bisulfide complexes, leading to efficient Au precipitation from a gold‐undersaturated (0.045 ± 0.024 ppm Au; 1σ; n = 58 fluid inclusions) aqueous‐carbonic fluid (H2O‐NaCl‐CO2 ± N2 ± CH4). The proposed mineralization mechanism is supported by: (a) a complementary decrease in Au and redox‐sensitive semimetals (As, Sb), and increase in wall rock‐derived elements (i.e., Mg, K, Ca, Sr, Fe) concentrations in fluid inclusions with time; (b) a corresponding decrease in the XCO2, consistent with CO2 removal via reduction/respeciation and late carbonate precipitation; and (c) gold embedding in, or on, the surface of CM inside mineralized cavities and fractures. Despite mineralizing fluids transporting low concentrations of Au far from saturation, precipitation of gold was locally evidently high where such fluids interacted with CM, contributing to the overall gold endowment of Meguma deposits. This work re‐emphasizes CM as a potential prerequisite for efficient gold precipitation within the overall genetic model for similar orogenic metasedimentary settings globally where the presence and/or role of CM has been documented.
- Open Access
- 25 October 2024
- Published by Springer Nature in Communications Earth & Environment
- Vol. 5 (1) , 1-12
Fluid inclusions in magmatic ilmenite record degassing in basic magmas
- 25 October 2024
- Published by Springer Nature in Communications Earth & Environment
- Vol. 5 (1) , 1-12
Open AccessFluid inclusions in magmatic ilmenite record degassing in basic magmas
- Open Access
Au-Bi-Te(-Cu) Mineralization in the Wawa Gold Corridor (Ontario, Canada): Implications for the Role of Bi-Rich Polymetallic Melts in Orogenic Au Systems
The Wawa Gold Corridor, a series of Archean orogenic Au deposits in the Michipicoten greenstone belt, Canada, comprises two styles of Au mineralization: (1) syn-deformation gold associated with pyrite and arsenopyrite; and (2) late- to post-deformation gold associated with chalcopyrite and Bi-Te(-S) phases. Through petrographic and mineral–chemical analysis, it was determined that gold in the latter assemblages precipitated from Bi-rich polymetallic melts during hydrothermal overprinting of the earlier Au-As-S mineralization; this event was likely driven by the emplacement of Archean lamprophyres. The formation and evolution of these melts was governed by fluid–pyrite reaction interfaces, where the bulk composition of the melts was broadly controlled by the trace-element chemistry of the sulphide minerals in the local host rocks. This suggests that the melt-formation event involved mobilization of existing metal endowments related to early Au events, rather than addition of new Au, Bi, and Te. Thus, the deposition of high-grade Au by Bi-rich melts was dependent on pre-existing sulphide mineralization, both as a source of metals and as micro-environments that stabilized the melts. The paragenesis documented in the Wawa Gold Corridor (i.e., early hydrothermal Au-As-S mineralization and late melt-related Au-Bi-Te mineralization) has been previously recognized in numerous other orogenic and non-orogenic Au deposits. Herein, it is suggested that this apparent consistency in the timing of melt events across multiple systems probably reflects the physicochemical conditions (i.e., fO2-aH2S) of orogenic fluids being incompatible with molten Bi. Bi-rich polymetallic melts are hence unlikely to form primary Au mineralization in orogenic systems but can, however, have a significant impact on the ultimate deposit-scale distribution of Au via secondary mobilization and enrichment.
Open AccessAu-Bi-Te(-Cu) Mineralization in the Wawa Gold Corridor (Ontario, Canada): Implications for the Role of Bi-Rich Polymetallic Melts in Orogenic Au Systems
The Wawa Gold Corridor, a series of Archean orogenic Au deposits in the Michipicoten greenstone belt, Canada, comprises two styles of Au mineralization: (1) syn-deformation gold associated with pyrite and arsenopyrite; and (2) late- to post-deformation gold associated with chalcopyrite and Bi-Te(-S) phases. Through petrographic and mineral–chemical analysis, it was determined that gold in the latter assemblages precipitated from Bi-rich polymetallic melts during hydrothermal overprinting of the earlier Au-As-S mineralization; this event was likely driven by the emplacement of Archean lamprophyres. The formation and evolution of these melts was governed by fluid–pyrite reaction interfaces, where the bulk composition of the melts was broadly controlled by the trace-element chemistry of the sulphide minerals in the local host rocks. This suggests that the melt-formation event involved mobilization of existing metal endowments related to early Au events, rather than addition of new Au, Bi, and Te. Thus, the deposition of high-grade Au by Bi-rich melts was dependent on pre-existing sulphide mineralization, both as a source of metals and as micro-environments that stabilized the melts. The paragenesis documented in the Wawa Gold Corridor (i.e., early hydrothermal Au-As-S mineralization and late melt-related Au-Bi-Te mineralization) has been previously recognized in numerous other orogenic and non-orogenic Au deposits. Herein, it is suggested that this apparent consistency in the timing of melt events across multiple systems probably reflects the physicochemical conditions (i.e., fO2-aH2S) of orogenic fluids being incompatible with molten Bi. Bi-rich polymetallic melts are hence unlikely to form primary Au mineralization in orogenic systems but can, however, have a significant impact on the ultimate deposit-scale distribution of Au via secondary mobilization and enrichment.
- Open Access
- 1 January 2021
- Published by Society of Economic Geologists, Inc.
- p. 29-48
Superimposed Porphyry Systems in the Dawson Range, Yukon
Superimposed porphyry systems are a subset of telescoped porphyry deposits, whereby significantly younger ore zones overprint older, nongenetically related systems. Recognition of superimposed features in porphyry systems is important for determining and assessing their prospectivity. The Mount Nansen gold corridor in the southern Dawson Range gold belt of Yukon, Canada, contains porphyry prospects and epithermal deposits with enigmatic genetic models. Geologic, petrologic, temporal (U-Pb zircon, Re-Os molybdenite), and geochemical (whole-rock) studies are used to demonstrate the presence of superimposed porphyry systems in this district. The arc-related episodic magmatism of the Mount Nansen gold corridor has been classified into four intrusive suites: (1) Late Triassic Minto, (2) mid-Cretaceous Whitehorse, (3) Late Cretaceous Casino (eLKc; 80–72 Ma), and (4) Late Cretaceous Prospector Mountain (lLKp; 72–65 Ma). Geochemical fingerprinting of these suites indicates intermediate to evolved, calc-alkaline compositions with a common lower crust melt source. The eLKc and lLKp suites lack an Eu anomaly and show increasing amounts of light rare earth element (LREE) enrichment and heavy rare earth element (HREE) depletion over time. These features suggest that garnet was stable in the melt source and oxidized magmas were generated in these Late Cretaceous suites. The mildly alkaline lLKp and associated Carmacks Group shoshonitic basalts reflect localized extension in an overall compressive arc setting in the Mount Nansen gold corridor, hence a setting conducive for Au-rich porphyry and epithermal systems. The ca. 79 to 72 Ma Casino suite is commonly interpreted as the causative magmatic event for most well-endowed porphyry deposits (76 to 74 Ma in age) in the Dawson Range gold belt. However, our detailed study of the Klaza setting shows that at this locality, intermediate-sulfidation epithermal veins are a distal expression of a Prospector Mountain-age (ca. 71 Ma) porphyry system, which overprints two Casino-age porphyry systems (ca. 77 and 80 Ma). The Mount Nansen gold corridor thus hosts at least two spatially and temporally overprinting Late Cretaceous magmatic-hydrothermal systems in the Dawson Range gold belt. Importantly, recognition of this feature at other porphyry deposit settings in the Dawson Range gold belt (e.g., Freegold Mountain district) is critical as it provides the potential for metal (Cu-Au-Mo)-enriched hypogene ore shells.
- 1 January 2021
- Published by Society of Economic Geologists, Inc.
- p. 29-48
Open AccessSuperimposed Porphyry Systems in the Dawson Range, Yukon
Superimposed porphyry systems are a subset of telescoped porphyry deposits, whereby significantly younger ore zones overprint older, nongenetically related systems. Recognition of superimposed features in porphyry systems is important for determining and assessing their prospectivity. The Mount Nansen gold corridor in the southern Dawson Range gold belt of Yukon, Canada, contains porphyry prospects and epithermal deposits with enigmatic genetic models. Geologic, petrologic, temporal (U-Pb zircon, Re-Os molybdenite), and geochemical (whole-rock) studies are used to demonstrate the presence of superimposed porphyry systems in this district. The arc-related episodic magmatism of the Mount Nansen gold corridor has been classified into four intrusive suites: (1) Late Triassic Minto, (2) mid-Cretaceous Whitehorse, (3) Late Cretaceous Casino (eLKc; 80–72 Ma), and (4) Late Cretaceous Prospector Mountain (lLKp; 72–65 Ma). Geochemical fingerprinting of these suites indicates intermediate to evolved, calc-alkaline compositions with a common lower crust melt source. The eLKc and lLKp suites lack an Eu anomaly and show increasing amounts of light rare earth element (LREE) enrichment and heavy rare earth element (HREE) depletion over time. These features suggest that garnet was stable in the melt source and oxidized magmas were generated in these Late Cretaceous suites. The mildly alkaline lLKp and associated Carmacks Group shoshonitic basalts reflect localized extension in an overall compressive arc setting in the Mount Nansen gold corridor, hence a setting conducive for Au-rich porphyry and epithermal systems. The ca. 79 to 72 Ma Casino suite is commonly interpreted as the causative magmatic event for most well-endowed porphyry deposits (76 to 74 Ma in age) in the Dawson Range gold belt. However, our detailed study of the Klaza setting shows that at this locality, intermediate-sulfidation epithermal veins are a distal expression of a Prospector Mountain-age (ca. 71 Ma) porphyry system, which overprints two Casino-age porphyry systems (ca. 77 and 80 Ma). The Mount Nansen gold corridor thus hosts at least two spatially and temporally overprinting Late Cretaceous magmatic-hydrothermal systems in the Dawson Range gold belt. Importantly, recognition of this feature at other porphyry deposit settings in the Dawson Range gold belt (e.g., Freegold Mountain district) is critical as it provides the potential for metal (Cu-Au-Mo)-enriched hypogene ore shells.
- Open Access
Tonalite-Dominated Magmatism in the Abitibi Subprovince, Canada, and Significance for Cu-Au Magmatic-Hydrothermal Systems
In Archean greenstone belts, magmatism is dominated by intrusive and volcanic rocks with tholeiitic affinities, as well as tonalite- and granodiorite-dominated large-volume batholiths, i.e., tonalite–trondhjemite–granodiorite (TTG) suites. These intrusions are associated with poorly documented mineralization (Cu-Au porphyries) that, in the Neoarchean Abitibi Subprovince (>2.79 to ~2.65 Ga), Superior Province, Canada, are associated with diorite bearing plutons, i.e., tonalite–trondhjemite–diorite (TTD) suites. The importance of TTG versus TTD suites in the evolution of greenstone belts and of their magmatic-hydrothermal systems and related mineralization is unconstrained. The aim of this study was to portray the chemistry and distribution of these suites in the Abitibi Subprovince. The study used data compiled by the geological surveys of Québec and Ontario to evaluate the chemistry of TTG and TTD suites and uncovered two coeval magmas that significantly differentiated (fractional crystallization mostly): 1) a heavy rare earth elements (HREE)-depleted tonalitic magma from high pressure melting of an hydrated basalt source; and 2) a hybrid HREE-undepleted magma that may be a mixture of mantle-derived (tholeiite) and tonalitic melts. The HREE-depleted rocks (mostly tonalite and granodiorite) display chemical characteristics of TTG suites (HREE, Ti, Nb, Ta, Y, and Sr depletion, lack of mafic unit, Na-rich), while the other rocks (tonalite and diorite) formed TTD suites. Tonalite-dominated magmatism, in the Abitibi Subprovince, comprises crustal melts as well as a significant proportion of mantle-derived magmas and this may be essential for Cu-Au magmatic-hydrothermal mineralizing systems.
Open AccessTonalite-Dominated Magmatism in the Abitibi Subprovince, Canada, and Significance for Cu-Au Magmatic-Hydrothermal Systems
In Archean greenstone belts, magmatism is dominated by intrusive and volcanic rocks with tholeiitic affinities, as well as tonalite- and granodiorite-dominated large-volume batholiths, i.e., tonalite–trondhjemite–granodiorite (TTG) suites. These intrusions are associated with poorly documented mineralization (Cu-Au porphyries) that, in the Neoarchean Abitibi Subprovince (>2.79 to ~2.65 Ga), Superior Province, Canada, are associated with diorite bearing plutons, i.e., tonalite–trondhjemite–diorite (TTD) suites. The importance of TTG versus TTD suites in the evolution of greenstone belts and of their magmatic-hydrothermal systems and related mineralization is unconstrained. The aim of this study was to portray the chemistry and distribution of these suites in the Abitibi Subprovince. The study used data compiled by the geological surveys of Québec and Ontario to evaluate the chemistry of TTG and TTD suites and uncovered two coeval magmas that significantly differentiated (fractional crystallization mostly): 1) a heavy rare earth elements (HREE)-depleted tonalitic magma from high pressure melting of an hydrated basalt source; and 2) a hybrid HREE-undepleted magma that may be a mixture of mantle-derived (tholeiite) and tonalitic melts. The HREE-depleted rocks (mostly tonalite and granodiorite) display chemical characteristics of TTG suites (HREE, Ti, Nb, Ta, Y, and Sr depletion, lack of mafic unit, Na-rich), while the other rocks (tonalite and diorite) formed TTD suites. Tonalite-dominated magmatism, in the Abitibi Subprovince, comprises crustal melts as well as a significant proportion of mantle-derived magmas and this may be essential for Cu-Au magmatic-hydrothermal mineralizing systems.