Antonio Flores-Tlacuahuac
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Antonio Flores-Tlacuahuac has a total of 81 co-authors. Here are the top co-authors by number of shared publications:
- Francisco Jose Lozano
Tecnológico de Monterrey, campus Toluca
8 shared publications - Luis Fabián Fuentes-Cortés
Tecnológico Nacional de México, Instituto Tecnológico de Celaya, Departamento de Ingeniería Química, Celaya, Mexico
6 shared publications - José Ezequiel Santibañez-Aguilar
School of Engineering and Sciences, Tecnolgico de Monterrey, Monterrey, Nuevo Leon, Mexico
5 shared publications - Diego Fabián Lozano García
Escuela de Ingeniería y Ciencias, Tecnológico de Monterrey, Ave. Eugenio Garza Sada 2501, Monterrey 64849, Mexico
4 shared publications - José María Ponce-Ortega
Department of Chemical Engineering, Universidad Michoacana de San Nicolás de Hidalgo, Francisco J. Mujica S/N, Ciudad Universitaria, Morelia 58060, Michoacán de Ocampo, Mexico
3 shared publications - Miguel Angel Gutiérrez-Limón
Departamento de Energía, Universidad Autónoma Metropolitana—Azcapotzalco, Av. San Pablo No. 180, Colonia Reynosa Tamaulipas, Azcapotzalco, Mexico City 02200, Mexico
3 shared publications
Latest Publications
- 9 February 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (6) , 3389-3405
Generative AI as an Enabler for Process Intensification
- 9 February 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (6) , 3389-3405
Generative AI as an Enabler for Process Intensification
- Open Access
- 1 July 2025
- Published by The CACHE Foundation, Inc. in Systems and Control Transactions
- Vol. 4, 1029-1034
A Bayesian optimization approach for data-driven Petlyuk distillation column
Recently, the focus on increasing process efficiency to reduce energy consumption has driven the adoption of alternative systems, such as Petlyuk distillation columns. It has been proven that, when compared to conventional distillation columns, these systems offer significant energy and cost savings. From an economic standpoint, achieving high-purity products alone does not ensure the feasibility of a process. Instead, balancing the trade-off between product purity and cost necessitates multi-objective optimization. While conventional optimization methods are effective, novel strategies like Bayesian optimization offer distinct advantages for handling complex systems. Bayesian optimization requires no explicit mathematical model and can efficiently optimize even when starting from a single initial point. However, as a black-box method, it demands a detailed analysis of hyperparameters, such as the acquisition function and the number of initial points, to ensure optimal performance. This work presents a case study of a Petlyuk distillation column, focusing on the influence of key hyperparameters in Bayesian optimization. Additionally, the role of uncertainty in the optimization process is explored, as it is a critical factor in real-world applications. By simulating uncertainty, this study provides insights into its impact on the optimization process.
- 1 July 2025
- Published by The CACHE Foundation, Inc. in Systems and Control Transactions
- Vol. 4, 1029-1034
Open AccessA Bayesian optimization approach for data-driven Petlyuk distillation column
Recently, the focus on increasing process efficiency to reduce energy consumption has driven the adoption of alternative systems, such as Petlyuk distillation columns. It has been proven that, when compared to conventional distillation columns, these systems offer significant energy and cost savings. From an economic standpoint, achieving high-purity products alone does not ensure the feasibility of a process. Instead, balancing the trade-off between product purity and cost necessitates multi-objective optimization. While conventional optimization methods are effective, novel strategies like Bayesian optimization offer distinct advantages for handling complex systems. Bayesian optimization requires no explicit mathematical model and can efficiently optimize even when starting from a single initial point. However, as a black-box method, it demands a detailed analysis of hyperparameters, such as the acquisition function and the number of initial points, to ensure optimal performance. This work presents a case study of a Petlyuk distillation column, focusing on the influence of key hyperparameters in Bayesian optimization. Additionally, the role of uncertainty in the optimization process is explored, as it is a critical factor in real-world applications. By simulating uncertainty, this study provides insights into its impact on the optimization process.
- 9 June 2025
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 104 (1) , 182-202
A data‐driven optimization approach for the molecular design of CO 2 capture ionic liquids mixtures
CO emissions into the atmosphere have become a global concern in recent years. The amount of CO generated in post‐combustion processes has attracted the attention of the international scientific community. Some processes use alkanolamines to absorb CO; however, their volatility increases the process cost. An alternative to this limitation is the use of ionic liquids (ILs) as solvents in the CO absorption process. An important characteristic of ILs is their extremely low vapour pressure, making them practically non‐volatile. In this work, molecular dynamics simulation (MDS) was employed to calculate the absorption capacity of an IL mixture, and a design of experiments approach guided by Bayesian optimization (BO) was used to find an optimal IL mixture that maximizes the amount of CO captured. The applied methodology helps to reduce the number of numerical experiments and, consequently, computation time. The IL mixture analyzed was [BMIM][NTF] and [EMIM][SCN] (1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide and 1‐ethyl‐3‐methylimidazolium thiocyanate) due to their known effectiveness as absorbents. With only 12 simulations, the composition of the IL mixture that achieve maximum CO absorption was determined. The results obtained encourage further exploration of other IL mixtures that may absorb greater amounts of CO.
- 9 June 2025
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 104 (1) , 182-202
A data‐driven optimization approach for the molecular design of CO 2 capture ionic liquids mixtures
CO emissions into the atmosphere have become a global concern in recent years. The amount of CO generated in post‐combustion processes has attracted the attention of the international scientific community. Some processes use alkanolamines to absorb CO; however, their volatility increases the process cost. An alternative to this limitation is the use of ionic liquids (ILs) as solvents in the CO absorption process. An important characteristic of ILs is their extremely low vapour pressure, making them practically non‐volatile. In this work, molecular dynamics simulation (MDS) was employed to calculate the absorption capacity of an IL mixture, and a design of experiments approach guided by Bayesian optimization (BO) was used to find an optimal IL mixture that maximizes the amount of CO captured. The applied methodology helps to reduce the number of numerical experiments and, consequently, computation time. The IL mixture analyzed was [BMIM][NTF] and [EMIM][SCN] (1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide and 1‐ethyl‐3‐methylimidazolium thiocyanate) due to their known effectiveness as absorbents. With only 12 simulations, the composition of the IL mixture that achieve maximum CO absorption was determined. The results obtained encourage further exploration of other IL mixtures that may absorb greater amounts of CO.
- 21 April 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (19) , 9484-9499
Exploring Hybrid Quantum-Classical Algorithms for Multiscale Bioprocess Optimization
- 21 April 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (19) , 9484-9499
Exploring Hybrid Quantum-Classical Algorithms for Multiscale Bioprocess Optimization
- 20 February 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (9) , 4942-4965
pyBOWIE: A Python Library for Constrained Mixed-Integer Bayesian Optimization with Superlevel Set Filtration
- 20 February 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (9) , 4942-4965
pyBOWIE: A Python Library for Constrained Mixed-Integer Bayesian Optimization with Superlevel Set Filtration
- 18 February 2025
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 103 (8) , 3713-3725
Data‐driven deep learning prediction of full molecular weight distribution in polymerization processes
The mathematical modelling of the full molecular weight distribution (MWD) results in a large set of ordinary differential equations (ODEs), which usually requires considerable computation time because of stiffness behaviour. This study applies state‐of‐the‐art deep learning (DL) methods to model three academically and industrially relevant polymerization processes: free radical polymerization (FRP), reversible addition–fragmentation (RAFT), and coordination catalyst polymerization (CCP). The DL models were trained with datasets generated from the numerical solution of the first principles kinetic model of each polymerization process. Then, the applied DL models were used to predict the conversion rate, average molar weights, and molecular weight distributions with minimum deviations and reduced computational load. Therefore, by reducing the large computational load, this type of DL models can make feasible the application of on‐line optimal control strategies to complex and economically important polymerization processes.
- 18 February 2025
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 103 (8) , 3713-3725
Data‐driven deep learning prediction of full molecular weight distribution in polymerization processes
The mathematical modelling of the full molecular weight distribution (MWD) results in a large set of ordinary differential equations (ODEs), which usually requires considerable computation time because of stiffness behaviour. This study applies state‐of‐the‐art deep learning (DL) methods to model three academically and industrially relevant polymerization processes: free radical polymerization (FRP), reversible addition–fragmentation (RAFT), and coordination catalyst polymerization (CCP). The DL models were trained with datasets generated from the numerical solution of the first principles kinetic model of each polymerization process. Then, the applied DL models were used to predict the conversion rate, average molar weights, and molecular weight distributions with minimum deviations and reduced computational load. Therefore, by reducing the large computational load, this type of DL models can make feasible the application of on‐line optimal control strategies to complex and economically important polymerization processes.
- Open Access
Interpretation of COVID-19 Epidemiological Trends in Mexico Through Wastewater Surveillance Using Simple Machine Learning Algorithms for Rapid Decision-Making
Detection and quantification of disease-related biomarkers in wastewater samples, denominated Wastewater-based Surveillance (WBS), has proven a valuable strategy for studying the prevalence of infectious diseases within populations in a time- and resource-efficient manner, as wastewater samples are representative of all cases within the catchment area, whether they are clinically reported or not. However, analysis and interpretation of WBS datasets for decision-making during public health emergencies, such as the COVID-19 pandemic, remains an area of opportunity. In this article, a database obtained from wastewater sampling at wastewater treatment plants (WWTPs) and university campuses in Monterrey and Mexico City between 2021 and 2022 was used to train simple clustering- and regression-based risk assessment models to allow for informed prevention and control measures in high-affluence facilities, even if working with low-dimensionality datasets and a limited number of observations. When dividing weekly data points based on whether the seven-day average daily new COVID-19 cases were above a certain threshold, the resulting clustering model could differentiate between weeks with surges in clinical reports and periods between them with an 87.9% accuracy rate. Moreover, the clustering model provided satisfactory forecasts one week (80.4% accuracy) and two weeks (81.8%) into the future. However, the prediction of the weekly average of new daily cases was limited (R2 = 0.80, MAPE = 72.6%), likely because of insufficient dimensionality in the database. Overall, while simple, WBS-supported models can provide relevant insights for decision-makers during epidemiological outbreaks, regression algorithms for prediction using low-dimensionality datasets can still be improved.
Open AccessInterpretation of COVID-19 Epidemiological Trends in Mexico Through Wastewater Surveillance Using Simple Machine Learning Algorithms for Rapid Decision-Making
Detection and quantification of disease-related biomarkers in wastewater samples, denominated Wastewater-based Surveillance (WBS), has proven a valuable strategy for studying the prevalence of infectious diseases within populations in a time- and resource-efficient manner, as wastewater samples are representative of all cases within the catchment area, whether they are clinically reported or not. However, analysis and interpretation of WBS datasets for decision-making during public health emergencies, such as the COVID-19 pandemic, remains an area of opportunity. In this article, a database obtained from wastewater sampling at wastewater treatment plants (WWTPs) and university campuses in Monterrey and Mexico City between 2021 and 2022 was used to train simple clustering- and regression-based risk assessment models to allow for informed prevention and control measures in high-affluence facilities, even if working with low-dimensionality datasets and a limited number of observations. When dividing weekly data points based on whether the seven-day average daily new COVID-19 cases were above a certain threshold, the resulting clustering model could differentiate between weeks with surges in clinical reports and periods between them with an 87.9% accuracy rate. Moreover, the clustering model provided satisfactory forecasts one week (80.4% accuracy) and two weeks (81.8%) into the future. However, the prediction of the weekly average of new daily cases was limited (R2 = 0.80, MAPE = 72.6%), likely because of insufficient dimensionality in the database. Overall, while simple, WBS-supported models can provide relevant insights for decision-makers during epidemiological outbreaks, regression algorithms for prediction using low-dimensionality datasets can still be improved.
- Open Access
- 17 October 2024
- Published by MDPI AG in Preprints.org
Interpretation of COVID-19 Epidemiological Trends in Mexico Through Wastewater Surveillance Using Simple Machine Learning Algorithms for Rapid Decision-Making
Detection and quantification of disease-related biomarkers in wastewater samples, denominated Wastewater Based Surveillance (WBS), has proven a valuable strategy for studying the prevalence of infectious diseases within populations in a time and resource-efficient manner, as wastewater samples are representative of all cases within the catchment area, whether they are clinically reported or not. However, analysis and interpretation of WBS datasets for decision-making during public health emergencies, such as the COVID-19 pandemic, remains an area of opportunity. In this article, a database obtained from wastewater sampling at wastewater treatment plants (WWTPs) and university campuses in Monterrey and Mexico City between 2021 and 2022 was used to train simple clustering and regression-based risk assessment models to allow for informed prevention and control measures in high-affluence facilities, even if working with low-dimensionality datasets and a limited number of observations. When dividing weekly data points based on whether the seven-day average daily new COVID-19 cases were above a certain threshold, the resulting clustering model could differentiate between weeks with surges in clinical reports and periods between them with an 83.3% accuracy rate. Moreover, the clustering model provided satisfactory forecasts one week (79.2% accuracy) and two weeks (72.9%) into the future. However, the prediction of the weekly average of new daily cases was limited (R2 = 0.452, MAPE = 180.2%), likely because of insufficient dimensionality in the database. Overall, while simple, WBS-supported models can provide relevant insights for decision-makers during epidemiological outbreaks, regression algorithms for prediction using low-dimensionality datasets can still be improved.
- 17 October 2024
- Published by MDPI AG in Preprints.org
Open AccessInterpretation of COVID-19 Epidemiological Trends in Mexico Through Wastewater Surveillance Using Simple Machine Learning Algorithms for Rapid Decision-Making
Detection and quantification of disease-related biomarkers in wastewater samples, denominated Wastewater Based Surveillance (WBS), has proven a valuable strategy for studying the prevalence of infectious diseases within populations in a time and resource-efficient manner, as wastewater samples are representative of all cases within the catchment area, whether they are clinically reported or not. However, analysis and interpretation of WBS datasets for decision-making during public health emergencies, such as the COVID-19 pandemic, remains an area of opportunity. In this article, a database obtained from wastewater sampling at wastewater treatment plants (WWTPs) and university campuses in Monterrey and Mexico City between 2021 and 2022 was used to train simple clustering and regression-based risk assessment models to allow for informed prevention and control measures in high-affluence facilities, even if working with low-dimensionality datasets and a limited number of observations. When dividing weekly data points based on whether the seven-day average daily new COVID-19 cases were above a certain threshold, the resulting clustering model could differentiate between weeks with surges in clinical reports and periods between them with an 83.3% accuracy rate. Moreover, the clustering model provided satisfactory forecasts one week (79.2% accuracy) and two weeks (72.9%) into the future. However, the prediction of the weekly average of new daily cases was limited (R2 = 0.452, MAPE = 180.2%), likely because of insufficient dimensionality in the database. Overall, while simple, WBS-supported models can provide relevant insights for decision-makers during epidemiological outbreaks, regression algorithms for prediction using low-dimensionality datasets can still be improved.