Marcio Luis Lyra Paredes
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Marcio Luis Lyra Paredes has a total of 108 co-authors. Here are the top co-authors by number of shared publications:
Rodrigo A. Reis
7 shared publications- João Araújo Pereira Coutinho
University of Aveiro
6 shared publications - Jean-Luc Daridon
Universite de Pau et des Pays de l’Adour, E2S UPPA, CNRS, LFCR, Pau, France
5 shared publications - Eduardo Rocha de Almeida Lima
Chemical Engineering Graduate Program
4 shared publications - Fabio Pedro Nascimento
Programa de Pós‐Graduação em Engenharia Industrial Escola Politécnica Universidade Federal da Bahia Rua Aristides Novis, 2, Federação Salvador Bahia 40210‐630 Brazil
4 shared publications A.A. Silva
3 shared publications
Latest Publications
- Open Access
Valorization of Coconut By-Products Using Eutectic Solvents: A Comprehensive Review on Green Extraction
Coconut (Cocos nucifera L.) is one of the most widely cultivated tropical crops, generating substantial by-products during industrial processing. Although rich in lignocellulosic components, phenolic compounds, lipids, and other bioactive molecules, they are often discarded or burned as low-grade fuel, causing environmental pollution and the proliferation of disease-carrying vectors. The sustainable valorization of these by-products is therefore essential to reduce environmental impact and enhance the economic value of the coconut chain. In this context, eutectic solvents (ES) have emerged as powerful potential green alternatives to conventional organic solvents for the extraction and fractionation of biomolecules. ES are formed through hydrogen-bonding interactions between hydrogen-bond donors and acceptors, yielding tunable solvents with low volatility, high selectivity, and biocompatibility. Their application to coconut biomass can enable the recovery of high-value compounds such as lignin, tannins, phenolic compounds, and fatty acids. This review provides a comprehensive overview of ES-based strategies for coconut by-product valorization, highlighting solvent compositions, main by-products explored, and target compounds extracted. Furthermore, it compares ES efficiency with traditional techniques and identifies current research gaps. Finally, the review highlights challenges and future directions for expanding ES application toward full coconut utilization, emphasizing their critical role in advancing sustainable, green chemistry.
Open AccessValorization of Coconut By-Products Using Eutectic Solvents: A Comprehensive Review on Green Extraction
Coconut (Cocos nucifera L.) is one of the most widely cultivated tropical crops, generating substantial by-products during industrial processing. Although rich in lignocellulosic components, phenolic compounds, lipids, and other bioactive molecules, they are often discarded or burned as low-grade fuel, causing environmental pollution and the proliferation of disease-carrying vectors. The sustainable valorization of these by-products is therefore essential to reduce environmental impact and enhance the economic value of the coconut chain. In this context, eutectic solvents (ES) have emerged as powerful potential green alternatives to conventional organic solvents for the extraction and fractionation of biomolecules. ES are formed through hydrogen-bonding interactions between hydrogen-bond donors and acceptors, yielding tunable solvents with low volatility, high selectivity, and biocompatibility. Their application to coconut biomass can enable the recovery of high-value compounds such as lignin, tannins, phenolic compounds, and fatty acids. This review provides a comprehensive overview of ES-based strategies for coconut by-product valorization, highlighting solvent compositions, main by-products explored, and target compounds extracted. Furthermore, it compares ES efficiency with traditional techniques and identifies current research gaps. Finally, the review highlights challenges and future directions for expanding ES application toward full coconut utilization, emphasizing their critical role in advancing sustainable, green chemistry.
- Open Access
- 10 November 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (46) , 22348-22362
Impact of Thermodynamic Modeling Accuracy on Guaiacol Recovery from Bio-Oil: Experimental Validation, Process Optimization, and Techno-Economic Assessment
- 10 November 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (46) , 22348-22362
Open AccessImpact of Thermodynamic Modeling Accuracy on Guaiacol Recovery from Bio-Oil: Experimental Validation, Process Optimization, and Techno-Economic Assessment
- 18 August 2025
- Published by Elsevier in Biomass and Bioenergy
- Vol. 203
Valorization of lignocellulosic biomass via pyrolysis: techno-economic analysis of guaiacol and levoglucosan co-production
- 18 August 2025
- Published by Elsevier in Biomass and Bioenergy
- Vol. 203
Valorization of lignocellulosic biomass via pyrolysis: techno-economic analysis of guaiacol and levoglucosan co-production
- 20 December 2024
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 420
Modeling aqueous solutions with ePC-SAFT including a relative static permittivity model connected to Wertheim's Association Theory
- 20 December 2024
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 420
Modeling aqueous solutions with ePC-SAFT including a relative static permittivity model connected to Wertheim's Association Theory
- 1 September 2022
- Published by Springer Nature in Brazilian Journal of Chemical Engineering
- Vol. 40 (2) , 585-597
Solubility of asphaltenes samples in polar and apolar synthetic mixtures: experimental and modeling
- 1 September 2022
- Published by Springer Nature in Brazilian Journal of Chemical Engineering
- Vol. 40 (2) , 585-597
Solubility of asphaltenes samples in polar and apolar synthetic mixtures: experimental and modeling
- 6 July 2022
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 44 (13) , 2452-2462
Preparation and characterization of patauá and pracaxi Brazilian vegetable oil emulsions
In this work, the stability of oil-in-water emulsions (O/W) of patauá (Oenocarpus bataua) and pracaxi (Pentaclethra macroloba) oils, both from Amazon rainforest, was investigated. Low-energy emulsification methods were used, such as Emulsion Inversion Point (EIP) and Phase Inversion Temperature (PIT), both based on the minimal interfacial surface, combined with optimized Hydrophilic-Lipophilic Balance (HLB). Phase inversion was determined by electrical conductivity measurements. The surfactants used were Span® 80, Tween® 20, Tween® 60, and Tween® 80. Surfactant mixtures of Span® 80 + Tween® 80 were the best samples prepared. The composition of the most stable samples was 80.00 wt% aqueous phase, 15.00 wt% nonionic surfactants, and 5.00 wt% oil phase (patauá or pracaxi oil). The samples with the best kinetic results were those prepared with the required HLB and PIT values of 12.86 and 84.05 °C, for patauá oil, and of 9.61 and 79.50 °C for pracaxi oil. The kinetic stability of the oil emulsions was characterized by creaming index (CI), by evolution over time of the droplet size, viscosity, and electric conductivity. The results showed that: (1) the droplet size distribution influenced electric conductivity; (2) the relative amount of surfactants Tween® and Span® used is more important to determine the physicochemical and interfacial properties of the emulsion than the oil identity itself; (3) it is crucial to pay attention to the influence of air bubbles—involuntarily inserted into the mixture during the emulsification process—in the physicochemical properties of the system. These conclusions can be extended to other oil-in-water emulsions. Graphical Abstract
- 6 July 2022
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 44 (13) , 2452-2462
Preparation and characterization of patauá and pracaxi Brazilian vegetable oil emulsions
In this work, the stability of oil-in-water emulsions (O/W) of patauá (Oenocarpus bataua) and pracaxi (Pentaclethra macroloba) oils, both from Amazon rainforest, was investigated. Low-energy emulsification methods were used, such as Emulsion Inversion Point (EIP) and Phase Inversion Temperature (PIT), both based on the minimal interfacial surface, combined with optimized Hydrophilic-Lipophilic Balance (HLB). Phase inversion was determined by electrical conductivity measurements. The surfactants used were Span® 80, Tween® 20, Tween® 60, and Tween® 80. Surfactant mixtures of Span® 80 + Tween® 80 were the best samples prepared. The composition of the most stable samples was 80.00 wt% aqueous phase, 15.00 wt% nonionic surfactants, and 5.00 wt% oil phase (patauá or pracaxi oil). The samples with the best kinetic results were those prepared with the required HLB and PIT values of 12.86 and 84.05 °C, for patauá oil, and of 9.61 and 79.50 °C for pracaxi oil. The kinetic stability of the oil emulsions was characterized by creaming index (CI), by evolution over time of the droplet size, viscosity, and electric conductivity. The results showed that: (1) the droplet size distribution influenced electric conductivity; (2) the relative amount of surfactants Tween® and Span® used is more important to determine the physicochemical and interfacial properties of the emulsion than the oil identity itself; (3) it is crucial to pay attention to the influence of air bubbles—involuntarily inserted into the mixture during the emulsification process—in the physicochemical properties of the system. These conclusions can be extended to other oil-in-water emulsions. Graphical Abstract
- 11 November 2021
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 66 (12) , 4368-4383
Measurement and Modeling of Thermodynamic Properties for Ternary Mixtures Containing 1-Butyl-3-methylimidazolium-Based Ionic Liquids with Acetophenone and Acetic or Propionic Acid
- 11 November 2021
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 66 (12) , 4368-4383
Measurement and Modeling of Thermodynamic Properties for Ternary Mixtures Containing 1-Butyl-3-methylimidazolium-Based Ionic Liquids with Acetophenone and Acetic or Propionic Acid
- 30 September 2021
- Published by Springer Nature in Brazilian Journal of Chemical Engineering
- Vol. 38 (4) , 967-976
Solubility parameter of narrow oil cuts by several models: quantifying the discrepancy among predictions for heavy cuts
- 30 September 2021
- Published by Springer Nature in Brazilian Journal of Chemical Engineering
- Vol. 38 (4) , 967-976
Solubility parameter of narrow oil cuts by several models: quantifying the discrepancy among predictions for heavy cuts
- Open Access
- 18 June 2021
- Published by EDP Sciences in Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles
- Vol. 76, 45
Experimental and modeling studies of density and viscosity behavior of a live fluid due to CO2injection at reservoir condition
In this study, highly accurate measurements of density and dynamic viscosities of a recombined live oil and its mixture with additional CO2were performed. The experiments were carried out under pressure and temperature gradients found in Brazilian Pre-salt reservoirs, that is, in the pressure range from (27.6 to 68.9) MPa and at (333.15 and 353.15) K. The assumption of volume change on mixing is evaluated from the experimental results, and the influence of pressure and temperature on the volume change upon mixing is assessed. The densities of mixtures are calculated considering (i) the excess volume approach, and (ii) no volume change. The densities are better correlated using the excess volume approach with Average Absolute Deviations (AAD) of 0.03%. Thirteen mixing rules of viscosity are examined by comparing the predicted values with the experimental viscosity of the recombined live oil + CO2mixture. The performance of some rules using compositional fractions (molar, volume and weight) is also evaluated. Thus, a total of 28 different ways to calculate the mixture viscosities were tested in this study. The worst result was obtained with Bingham’s method, leading to 148.6% AAD. The best result was obtained from Lederer’s method with 2% AAD and a maximum deviation of 5.8% using volume fractions and the fitting parameterα. In addition, deviations presented by the predictive methods of Chevron, Double log, and Kendall did not exceed 9% AAD, using weight fractions (Chevron and Double log) and molar fractions (Kendall and Monroe).
- 18 June 2021
- Published by EDP Sciences in Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles
- Vol. 76, 45
Open AccessExperimental and modeling studies of density and viscosity behavior of a live fluid due to CO2injection at reservoir condition
In this study, highly accurate measurements of density and dynamic viscosities of a recombined live oil and its mixture with additional CO2were performed. The experiments were carried out under pressure and temperature gradients found in Brazilian Pre-salt reservoirs, that is, in the pressure range from (27.6 to 68.9) MPa and at (333.15 and 353.15) K. The assumption of volume change on mixing is evaluated from the experimental results, and the influence of pressure and temperature on the volume change upon mixing is assessed. The densities of mixtures are calculated considering (i) the excess volume approach, and (ii) no volume change. The densities are better correlated using the excess volume approach with Average Absolute Deviations (AAD) of 0.03%. Thirteen mixing rules of viscosity are examined by comparing the predicted values with the experimental viscosity of the recombined live oil + CO2mixture. The performance of some rules using compositional fractions (molar, volume and weight) is also evaluated. Thus, a total of 28 different ways to calculate the mixture viscosities were tested in this study. The worst result was obtained with Bingham’s method, leading to 148.6% AAD. The best result was obtained from Lederer’s method with 2% AAD and a maximum deviation of 5.8% using volume fractions and the fitting parameterα. In addition, deviations presented by the predictive methods of Chevron, Double log, and Kendall did not exceed 9% AAD, using weight fractions (Chevron and Double log) and molar fractions (Kendall and Monroe).
- 3 February 2021
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 66 (3) , 1305-1318
Density of n-Heptane + n-Dodecane and Carbon Dioxide + n-Heptane + n-Dodecane Mixtures up to 70 MPa from (293.15 to 363.15) K
- 3 February 2021
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 66 (3) , 1305-1318
Density of n-Heptane + n-Dodecane and Carbon Dioxide + n-Heptane + n-Dodecane Mixtures up to 70 MPa from (293.15 to 363.15) K