AMAna Claudia Marques

Ana Claudia Marques

*This is an algorithmically generated author record based on publicly available information.

Ana Claudia Marques has a total of 99 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Cellulose Acetate and Polycaprolactone Fibre Coatings on Medical-Grade Metal Substrates for Controlled Drug Release

    by Catarina Cidade Do Carmo, Miguel Brito, J. P. Oliveira, Ana Marques, Isabel Ferreira, Ana Catarina Baptista

    This study explores a method that has the potential to be cost effective in inhibiting biofilm formation on metallic prostheses, thereby preventing rejection or the requirement for replacement. A cost-effective metal alloy used in biomedical implants was chosen as the substrate, and ibuprofen (Ibu), a well-known anti-inflammatory drug, was selected for drug release tests for its widespread availability and accessibility. Multilayer coatings consisting of cellulose acetate (CA), polycaprolactone (PCL), and chitosan (CHI), with or without ibuprofen (Ibu) content, were applied onto medical-grade stainless steel (SS-316 type) through electrospinning, electrospray, or blow spinning. The adhesion of the CA, PCL, and layered CA/PCL membranes, with thicknesses ranging from 20 to 100 μm, to SS substrates varied between 0.15 N and 0.22 N without CHI, which increased to 0.21 and 0.74 N, respectively, when a CHI interlayer was introduced by electrospraying between the SS and the coatings. Although drug release in a simulated body fluid (SBF) medium is predominantly governed by diffusion-driven mechanisms in all single- and multilayer coatings, a delayed release was noted in CA coatings containing Ibu when overlaid with a PCL coating produced by blow spinning. This suggests avenues for further investigations into combinations of multilayer coatings, both with and without drug-imbued layers.


  • Open Access

    Frequency dependence of the speed of sound in metallic rods

    by A Marques, M S Rodrigues

    The speed of sound waves in rods depends on the relationship between wavelength and rod dimensions. It differs from the speeds readily available in tables, and from what is often learned during most introductory courses on solid-state physics. Metallic rods with diameters in the centimetre range excited with sound waves of tens of kHz will behave as dispersive media. Here, the speed of sound in metallic titanium rods of different lengths is measured using two different methodologies: (1) from the time of flight and (2) from the wavelength and frequency of standing waves that form in the rod. The latter allows analyzing the results in light of Pochhammer-Cree dispersion. The reflection coefficient is also determined both from time and from frequency response. Two off-the-shelf piezoelectric transducers, a function generator, an oscilloscope, and a lock-in amplifier were used. We have used a low-frequency square wave (of tens of Hz) in the first case and a sine wave with frequencies that range from audible to ultrasound in the second case. Experimental results show that the speed of sound decreases as the wavelength decreases. The Pochhammer-Chree dispersion equation was numerically solved to fit the experimental data that can be used to estimate both the Young modulus and the Poisson ratio. A practical empirical formula that allows data analysis without explicitly solving the Pochhammer-Chree equation is suggested.


  • Open Access

    A facile blow spinning technique for green cellulose acetate/polystyrene composite separator for flexible energy storage devices

    by Amjid Rafique, Inês Sequeira, Ana Sofia Bento, Mariana Peyro Moniz, João Carmo, Eduardo Oliveira, João Pedro Oliveira, Ana Marques, Isabel Ferreira, Ana Catarina Baptista


  • Electronic control of drug release from gauze or cellulose acetate fibres for dermal applications

    by Ana Catarina Baptista, Miguel Brito, Ana Marques, Isabel Ferreira

    Electronic controlled drug release from fibres was studied using ibuprofen as a model drug, one of the most popular analgesics, to impregnate gauze and cellulose acetate (CA) membranes. Conductivity in the range of 1–10 mS cm−1 was obtained in polypyrrole (Ppy) functionalised gauze and CA fibres, providing voltage-controlled drug release in a system consisting of Ppy/Ibuprofen/Ppy membranes and an Ag electrode. SEM images evidenced the Ppy adhesion to fibres and Micro Raman spectra proved drug incorporation and release. A small wound adhesive built with these membranes retains ibuprofen at 1.5 V and quickly releases it when −0.5 V is applied.


  • Open Access

    Stability under humidity, UV-light and bending of AZO films deposited by ALD on Kapton

    by A. C. Marques, J. Faria, P. Perdigão, B. M. M. Faustino, Riina Ritasalo, Katiuscia Costabello, R. C. da Silva, I. Ferreira

    Aluminium doped zinc oxide (AZO) films were grown by Atomic Layer Deposition (ALD) on yellow Kapton and transparent Kapton (type CS) substrates for large area flexible transparent thermoelectric applications, which performance relies on the thermoelectric properties of the transparent AZO films. Therefore, their adhesion to Kapton, environmental and bending stability were accessed. Plasma treatment on Kapton substrates improved films adhesion, reduced cracks formation, and enhanced electrical resistance stability over time, of importance for long term thermoelectric applications in external environment. While exposure to UV light intensity caused the films electrical resistance to vary, and therefore their maximum power density outputs (0.3–0.4 mW/cm3) for a constant temperature difference (∼10 °C), humidity exposure and consecutive bending up to a curvature radius above the critical one (∼18 mm) not. Testing whether the films can benefit from encapsulation revealed that this can provide extra bending stability and prevent contacts deterioration in the long term.


  • Open Access

    Highly transparent copper iodide thin film thermoelectric generator on a flexible substrate

    by J. Coroa, B. M. Morais Faustino, A. Marques, C. Bianchi, T. Koskinen, T. Juntunen, I. Tittonen, I. Ferreira

    Simultaneously transparent and flexible conductive materials are in demand to follow the current trend in flexible technology. The search for materials with compliant optoelectronic properties, while simultaneously retaining their electric conductivity at high strain deformation, comprises promising opportunities in modern nanotechnology. Copper iodide (CuI) is not only the most transparent and highly conductive p-type material, but its optimization has contributed to improved ZT values in planar thin-film thermoelectrics. In this work, the readiness of CuI thin films to transparent, flexible technology is evidenced. A maximum ZT value of 0.29 for single CuI thin films of ca. 300 nm in thickness is reported. Values of open-circuit voltage Voc, short circuit current Isc and power output of p–n thermoelectric modules of Gallium-doped zinc oxide (GZO) and CuI thin films deposited on a transparent flexible Kapton® (type CS) substrate are reported, and a prototype of a flexible transparent thermoelectric generator based on 17 p–n modules was constructed. Bending analysis of CuI thin films reveals interesting, distinct results when submitted to compression and tension analysis – a behaviour not seen in conventional semiconducting thin films under equivalent strain conditions. A plausible account for such diversity is also included.


  • Open Access

    Synthesis of thermoelectric magnesium-silicide pastes for 3D printing, electrospinning and low-pressure spray

    by A. C. Marques, Davide Miglietta, G. Gaspar, A. C. Baptista, A. Gaspar, P. Perdigão, I. Soares, C. Bianchi, D. Sousa, B. M. Morais Faustino, et al.

    In this work, eco-friendly magnesium-silicide (Mg2Si) semiconducting (n-type) thermoelectric pastes for building components concerning energy-harvesting devices through 3D printing, spray and electrospinning were synthetized and tested for the first time. The Mg2Si fine powders were obtained through the combination of ball milling and thermal annealing under Ar atmosphere. While the latter process was crucial for obtaining the desired Mg2Si phase, the ball milling was indispensable for homogenizing and reducing the grain size of the powders. The synthetized Mg2Si powders exhibited a large Seebeck coefficient of ~ 487 µV/K and were blended with a polymeric solution in different mass ratios to adjust the paste viscosity to the different requirements of 3D printing, electrospinning and low-pressure spray. The materials produced in every single stage of the paste synthesis were characterized by a variety of techniques that unequivocally prove their viability for producing thermoelectric parts and components. These can certainly trigger further research and development in green thermoelectric generators (TEGs) capable of adopting any form or shape with enhanced thermoelectric properties. These green TEGs are meant to compete with common toxic materials such as Bi2Te3, PbTe and CoSb that have Seebeck coefficients in the range of ~ 290–700 μV/K, similar to that of the produced Mg2Si powders and lower than that of 3D printed bulk Mg2Si pieces, measured to be ~ 4866 μV/K. Also, their measured thermal conductivities proved to be significantly lower (~ 0.2 W/mK) than that reported for Mg2Si (≥ 4 W/mK). However, it is herein demonstrated that such thermoelectric properties are not stable over time. Pressureless sintering proved to be indispensable, but difficultly achievable by long thermal annealing (even above 32 h) in inert atmosphere at 400 °C, at least for bulk Mg2Si pieces constituted by a mean grain size of 2–3 μm. Hence, for overcoming this sintering challenge and become the silicide’s extrusion viable in the production of bulk thermoelectric parts, alternative pressureless sintering methods will have to be further explored.


  • Open Access

    Facile Microwave-assisted Synthesis Manganese Doped Zinc Sulfide Nanoparticles

    by David Magalhães Sousa, Luís Cerqueira Alves, Ana Marques, Guilherme Gaspar, João Carlos Lima, Isabel Ferreira

    Undoped and manganese doped zinc sulfide nanoparticles were produced by a fast, one-step and two-component microwave-assisted synthesis method. The solid phase retains around 78% of the initial Mn concentration, as revealed by Particle Induced X-ray Emission analysis. X-ray diffraction patterns confirmed zinc blende structure and in the transmission electron microscopy images, nanoparticles with triangular prism and cube shapes were observed, respectively with an average particle size around 7 nm and 13 nm. Dried powders of zinc sulfide nanoparticles, doped with 0.1 mol% and 0.7 mol% of Mn ions, show highest brilliance of luminescence under UV light. Increasing dopant levels resulted in a diminishing emission that vanishes above 4% of dopant concentration. The synthesis of ZnS was monitored and two main events were detected, one at 145 °C corresponding to the sol-gel phase formation and another after ~3 min at 300 °C where the precipitation of the zinc sulfide nanoparticles occurs.


  • Open Access

    CuI p-type thin films for highly transparent thermoelectric p-n modules

    by Bruno Miguel Morais Faustino, Diogo Gomes, Jaime Faria, Taneli Juntunen, Guilherme Gaspar, Catarina Bianchi, António Almeida, Ana Marques, Ilkka Tittonen, Isabel Ferreira

    Developments in thermoelectric (TE) transparent p-type materials are scarce and do not follow the trend of the corresponding n-type materials – a limitation of the current transparent thermoelectric devices. P-type thermoelectric thin films of CuI have been developed by three different methods in order to maximise optical transparency (>70% in the visible range), electrical (σ = 1.1 × 104 Sm−1) and thermoelectric properties (ZT = 0.22 at 300 K). These have been applied in the first planar fully transparent p-n type TE modules where gallium-doped zinc oxide (GZO) thin films were used as the n-type element and indium thin oxide (ITO) thin films as electrodes. A thorough study of power output in single elements and p-n modules electrically connected in series and thermally connected in parallel is inclosed. This configuration allows for a whole range of highly transparent thermoelectric applications.