Min Gee Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Min Gee Kim has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Shun-Ichiro Ohmi
Institute of Science Tokyo
3 shared publications - Byung-Eun Park
University of Seoul
1 shared publication - Changhwan Shin
School of Electrical Engineering, Korea University, Seoul, Korea
1 shared publication Dae Hee Han
1 shared publicationHidefumi Inoue
1 shared publication- Hyunjae Lee
University of Waterloo
1 shared publication
Latest Publications
- 1 June 2019
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Transactions on Electronics
- Vol. E102.C (6) , 435-440
The Effect of PMA with TiN Gate Electrode on the Formation of Ferroelectric Undoped HfO2 Directly Deposited on Si(100)
We have investigated post-metallization annealing (PMA) utilizing TiN gate electrode on the thin ferroelectric undoped HfO2 directly deposited on p-Si(100) by RF magnetron sputtering. By post-deposition annealing (PDA) process at 600°C/30 s in N2, the memory window (MW) in the C-V characteristics was observed in the Al/HfO2/p-Si(100) diodes with 15 to 24-nm-thick HfO2. However, it was not obtained when the thickness of HfO2 was 10 nm. On the other hand, the MW was observed for Pt/TiN/HfO2 (10 nm)/p-Si(100) diodes utilizing PMA process at 600°C/30 s. The MW was 0.5 V when the bias voltage was applied from -3 to 3 V.
- 1 June 2019
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Transactions on Electronics
- Vol. E102.C (6) , 435-440
The Effect of PMA with TiN Gate Electrode on the Formation of Ferroelectric Undoped HfO2 Directly Deposited on Si(100)
We have investigated post-metallization annealing (PMA) utilizing TiN gate electrode on the thin ferroelectric undoped HfO2 directly deposited on p-Si(100) by RF magnetron sputtering. By post-deposition annealing (PDA) process at 600°C/30 s in N2, the memory window (MW) in the C-V characteristics was observed in the Al/HfO2/p-Si(100) diodes with 15 to 24-nm-thick HfO2. However, it was not obtained when the thickness of HfO2 was 10 nm. On the other hand, the MW was observed for Pt/TiN/HfO2 (10 nm)/p-Si(100) diodes utilizing PMA process at 600°C/30 s. The MW was 0.5 V when the bias voltage was applied from -3 to 3 V.
- 25 February 2019
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 58 (SB) , SBBB08
Ferroelectric HfO 2 formation by annealing of a HfO 2 /Hf/HfO 2 /Si(100) stacked structure
In this research, ferroelectric characteristics of HfO 2 formed by annealing of a HfO 2 /Hf/HfO 2 /Si(100) stacked structure were investigated. It was found that the HfO 2 /Hf/HfO 2 stacked structure enhanced the formation of a metastable orthorhombic phase HfO 2 on Si(100) substrate by a post-deposition annealing (PDA) process at a low-temperature of 600 °C. The remnant polarization (2P r ) of 20 μ C cm −2 was obtained, which is larger than the 14 μ C cm −2 observed in the diode without a 1 nm thick Hf interlayer. However, the C–V characteristics with ferroelectric hysteresis was not obtained because its coercive field (2E c ) was as high as 9.6 MV cm −1 . On the other hand, the diode with a post-metallization annealing process induced the memory window of 0.9 V at the sweep range from −4 to 4 V in spite of smaller P r in its P – V characteristic than that of the diode with PDA process.
- 25 February 2019
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 58 (SB) , SBBB08
Ferroelectric HfO 2 formation by annealing of a HfO 2 /Hf/HfO 2 /Si(100) stacked structure
In this research, ferroelectric characteristics of HfO 2 formed by annealing of a HfO 2 /Hf/HfO 2 /Si(100) stacked structure were investigated. It was found that the HfO 2 /Hf/HfO 2 stacked structure enhanced the formation of a metastable orthorhombic phase HfO 2 on Si(100) substrate by a post-deposition annealing (PDA) process at a low-temperature of 600 °C. The remnant polarization (2P r ) of 20 μ C cm −2 was obtained, which is larger than the 14 μ C cm −2 observed in the diode without a 1 nm thick Hf interlayer. However, the C–V characteristics with ferroelectric hysteresis was not obtained because its coercive field (2E c ) was as high as 9.6 MV cm −1 . On the other hand, the diode with a post-metallization annealing process induced the memory window of 0.9 V at the sweep range from −4 to 4 V in spite of smaller P r in its P – V characteristic than that of the diode with PDA process.
- 19 September 2018
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 57 (11S) , 11UF09
Ferroelectric properties of undoped HfO 2 directly deposited on Si substrates by RF magnetron sputtering
In this research, we have investigated the undoped HfO 2 formation with a metastable orthorhombic phase on Si substrates and its substrate orientation dependence. A 24-nm-thick HfO 2 was deposited by radio-frequency (RF) magnetron sputtering with an Ar/O 2 plasma utilizing a Hf target. It was found that metastable orthorhombic phase formation was enhanced at an Ar/O 2 flow ratio of 2.0/0.2 sccm followed by post-deposition annealing at 600 °C/30 s in N 2 ambient. The memory window (MW) extracted from the capacitance–voltage ( C – V ) characteristics measured at 100 kHz of Al/HfO 2 /p-Si(100) was increased from 0.39 to 0.84 V as the Ar/O 2 flow ratio during sputtering was increased from Ar/O 2 of 2.0/1.0 to 2.0/0.2 sccm. In the case of p-Si(111) substrates, the MW was increased to 0.99 V when the Ar/O 2 flow ratio was 2.0/0.2 sccm probably owing to the enhanced crystallization of the metastable orthorhombic phase.
- 19 September 2018
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 57 (11S) , 11UF09
Ferroelectric properties of undoped HfO 2 directly deposited on Si substrates by RF magnetron sputtering
In this research, we have investigated the undoped HfO 2 formation with a metastable orthorhombic phase on Si substrates and its substrate orientation dependence. A 24-nm-thick HfO 2 was deposited by radio-frequency (RF) magnetron sputtering with an Ar/O 2 plasma utilizing a Hf target. It was found that metastable orthorhombic phase formation was enhanced at an Ar/O 2 flow ratio of 2.0/0.2 sccm followed by post-deposition annealing at 600 °C/30 s in N 2 ambient. The memory window (MW) extracted from the capacitance–voltage ( C – V ) characteristics measured at 100 kHz of Al/HfO 2 /p-Si(100) was increased from 0.39 to 0.84 V as the Ar/O 2 flow ratio during sputtering was increased from Ar/O 2 of 2.0/1.0 to 2.0/0.2 sccm. In the case of p-Si(111) substrates, the MW was increased to 0.99 V when the Ar/O 2 flow ratio was 2.0/0.2 sccm probably owing to the enhanced crystallization of the metastable orthorhombic phase.
- 30 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 64 (12) , 4974-4979
Transconductance Amplification by the Negative Capacitance in Ferroelectric-Gated P3HT Thin-Film Transistor
With lots of interest in negative capacitance field-effect transistors for ultralow-power complementary metal–oxide–semiconductor technology, negative capacitance thin-film transistors (NCTFTs) have also received much attention. Although previous studies on NCTFTs were done, the NC effect in organic-based TFTs was not studied yet. In this paper, P(VDF-TrFE) ferroelectric-gated P3HT semiconductor channel TFTs are experimentally demonstrated with solution-based fabrication process. Especially, this paper shed light on the NC effect in the organic-based TFTs. The step-up current-voltage characteristics are repeatedly and reliably observed in diverse TFTs, and then, with the results, transconductance ($g_{m}$ ) amplification implemented by the negative capacitance was delved. Moreover, with the aid of ferroelectric polarization switching, super steep-switching characteristic of the organic-based TFT was experimentally confirmed. These experimental results and discussion would be helpful in understanding NC effects in TFTs.- 30 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 64 (12) , 4974-4979
Transconductance Amplification by the Negative Capacitance in Ferroelectric-Gated P3HT Thin-Film Transistor
With lots of interest in negative capacitance field-effect transistors for ultralow-power complementary metal–oxide–semiconductor technology, negative capacitance thin-film transistors (NCTFTs) have also received much attention. Although previous studies on NCTFTs were done, the NC effect in organic-based TFTs was not studied yet. In this paper, P(VDF-TrFE) ferroelectric-gated P3HT semiconductor channel TFTs are experimentally demonstrated with solution-based fabrication process. Especially, this paper shed light on the NC effect in the organic-based TFTs. The step-up current-voltage characteristics are repeatedly and reliably observed in diverse TFTs, and then, with the results, transconductance ($g_{m}$ ) amplification implemented by the negative capacitance was delved. Moreover, with the aid of ferroelectric polarization switching, super steep-switching characteristic of the organic-based TFT was experimentally confirmed. These experimental results and discussion would be helpful in understanding NC effects in TFTs.- 17 October 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 109 (16) , 163502
Solution-processed organic ferroelectric field-effect transistors on ultra-flexible substrates
We fabricated ultra-flexible organic non-volatile ferroelectric field-effect transistors (FeFETs) with poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] on polyimide substrates, which adopted a solution-based top-contact/bottom-gate structure for low cost process without patterning. P(VDF-TrFE) gate dielectric layers and regioregular poly(3-hexylthiophene) active layers were formed by the spin-coating method. The field-effect mobility (μFE) was ∼0.28 cm2/V s, the on/off ratio was approximately 5.6 × 103, and the memory window (threshold voltage shift) was approximately 7 V. In addition, FeFETs were operated even at small bend radii without considerable changes in these values.
- 17 October 2016
- Published by AIP Publishing in Applied Physics Letters
- Vol. 109 (16) , 163502
Solution-processed organic ferroelectric field-effect transistors on ultra-flexible substrates
We fabricated ultra-flexible organic non-volatile ferroelectric field-effect transistors (FeFETs) with poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] on polyimide substrates, which adopted a solution-based top-contact/bottom-gate structure for low cost process without patterning. P(VDF-TrFE) gate dielectric layers and regioregular poly(3-hexylthiophene) active layers were formed by the spin-coating method. The field-effect mobility (μFE) was ∼0.28 cm2/V s, the on/off ratio was approximately 5.6 × 103, and the memory window (threshold voltage shift) was approximately 7 V. In addition, FeFETs were operated even at small bend radii without considerable changes in these values.