Julien Steffen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Julien Steffen has a total of 112 co-authors. Here are the top co-authors by number of shared publications:
- Andreas Görling
Lehrstuhl für Theoretische Chemie, Universität Erlangen-Nürnberg 1 , Egerlandstr. 3, D-91058 Erlangen
21 shared publications - Hans-Peter Steinrück
Lehrstuhl für Physikalische Chemie 2 Friedrich‐Alexander‐Universität Erlangen‐Nürnberg Erlangen Germany
11 shared publications - Christian Papp
Angewandte Physikalische Chemie Freie Universität Berlin Arnimallee 22 14195 Berlin Germany
7 shared publications - Peter Wasserscheid
Forschungszentrum Jülich GmbH, Helmholtz Institute Erlangen-Nürnberg for Renewable Energy (IEK-11), Cauerstr. 1, 91058 Erlangen, Germany
7 shared publications - Jörg Libuda
Interface Research and Catalysis, ECRC, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany
6 shared publications - Natalie J. Waleska-Wellnhofer
Lehrstuhl für Physikalische Chemie II, Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen, Germany
5 shared publications
Latest Publications
- 16 November 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
Disentangling Redox and Decomposition Pathways of N -Methylphthalimide in Organic Redox Flow Batteries Using In Situ IR Spectroscopy
The stability of organic redox-active materials remains a key challenge for organic redox flow batteries (RFBs). Here, we investigate the electrochemical behavior and decomposition pathways of N-methylphthalimide (MePh) in acetonitrile using cyclic voltammetry, in situ electrochemical infrared reflection absorption spectroscopy (EC-IRRAS), and density functional theory (DFT) calculations. The reduction of MePh to its radical anion (MePh•–) is confirmed by spectroscopic fingerprints in agreement with DFT. Time-resolved measurements reveal fast electron transfer followed by a slower chemical decomposition reaction. At −2.5 Vfc, a decomposition product characterized by a band at 1666–1667 cm–1 develops after formation of MePh•–. During extended cycling, solvent degradation also occurs at the lower potential limit of −2.2 Vfc; the resulting degradation products may react further with the anolyte. Electrode fouling is excluded as the primary degradation mechanism; instead, activity loss is attributed to anolyte decomposition in solution. DFT calculations identify hydrogenated MePh species as plausible candidates for the observed decomposition product. The electrochemical activity can be restored by renewal of the electrolyte. These findings provide mechanistic insights for improving the stability of organic RFB electrolytes.
- 16 November 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
Disentangling Redox and Decomposition Pathways of N -Methylphthalimide in Organic Redox Flow Batteries Using In Situ IR Spectroscopy
The stability of organic redox-active materials remains a key challenge for organic redox flow batteries (RFBs). Here, we investigate the electrochemical behavior and decomposition pathways of N-methylphthalimide (MePh) in acetonitrile using cyclic voltammetry, in situ electrochemical infrared reflection absorption spectroscopy (EC-IRRAS), and density functional theory (DFT) calculations. The reduction of MePh to its radical anion (MePh•–) is confirmed by spectroscopic fingerprints in agreement with DFT. Time-resolved measurements reveal fast electron transfer followed by a slower chemical decomposition reaction. At −2.5 Vfc, a decomposition product characterized by a band at 1666–1667 cm–1 develops after formation of MePh•–. During extended cycling, solvent degradation also occurs at the lower potential limit of −2.2 Vfc; the resulting degradation products may react further with the anolyte. Electrode fouling is excluded as the primary degradation mechanism; instead, activity loss is attributed to anolyte decomposition in solution. DFT calculations identify hydrogenated MePh species as plausible candidates for the observed decomposition product. The electrochemical activity can be restored by renewal of the electrolyte. These findings provide mechanistic insights for improving the stability of organic RFB electrolytes.
- Open Access
- 5 November 2026
- Published by Wiley in ChemCatChem
- Vol. 18 (21)
Tuning Surface Enrichment in Liquid Metal Catalysts: A Combined DFT, ML‐FF, and XPS Study of GaAgPt and GaCuPt
Liquid metal catalysts are an emerging field in catalysis with promising outlooks for industry. They combine simple synthesis with high control over the nature of the active sites, which are uniform and isolated. Binary liquid metal alloys were successfully employed in industrially relevant reactions related to C─C and C─H bond activation. They demonstrate poisoning and coking resistance while having high catalytic activity. The focus of this work is to move on to ternary metal alloys and thereby change the nature and abundance of the active site at the surface. The coinage metals Ag or Cu were added to a binary alloy with 1 at% Pt in Ga. These ternary mixtures were investigated using density functional theory (DFT)/machine‐learned force‐field (ML‐FF) and x‐ray photoelectron spectroscopy (XPS). The simulations showed the bulk segregation of the coinage metals, which influences the surface concentrations of catalytically active Pt. Specifically, the presence of Ag promotes a surface excess of Pt, whereas Cu leads to its segregation into the bulk. The predictions were reproduced by XPS on macroscopic alloys. The control over the concentration of the active sites in a heterogeneous catalyst system demonstrated here is a crucial step toward the knowledge‐based development of liquid metal catalysts.
- 5 November 2026
- Published by Wiley in ChemCatChem
- Vol. 18 (21)
Open AccessTuning Surface Enrichment in Liquid Metal Catalysts: A Combined DFT, ML‐FF, and XPS Study of GaAgPt and GaCuPt
Liquid metal catalysts are an emerging field in catalysis with promising outlooks for industry. They combine simple synthesis with high control over the nature of the active sites, which are uniform and isolated. Binary liquid metal alloys were successfully employed in industrially relevant reactions related to C─C and C─H bond activation. They demonstrate poisoning and coking resistance while having high catalytic activity. The focus of this work is to move on to ternary metal alloys and thereby change the nature and abundance of the active site at the surface. The coinage metals Ag or Cu were added to a binary alloy with 1 at% Pt in Ga. These ternary mixtures were investigated using density functional theory (DFT)/machine‐learned force‐field (ML‐FF) and x‐ray photoelectron spectroscopy (XPS). The simulations showed the bulk segregation of the coinage metals, which influences the surface concentrations of catalytically active Pt. Specifically, the presence of Ag promotes a surface excess of Pt, whereas Cu leads to its segregation into the bulk. The predictions were reproduced by XPS on macroscopic alloys. The control over the concentration of the active sites in a heterogeneous catalyst system demonstrated here is a crucial step toward the knowledge‐based development of liquid metal catalysts.
- Open Access
- 3 November 2026
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 16 (21) , 7277-7289
Partial oxidation of ortho - and para -benzyltoluene using VO x /TiO 2 based catalysts
A single methyl substituent strongly alters the partial oxidation of diphenylmethane and benzyltoluene regio-isomers over Sb-doped VO x /TiO 2 . DFT links their distinct reactivities to differences in catalyst-reactant electronic interactions.
- 3 November 2026
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 16 (21) , 7277-7289
Open AccessPartial oxidation of ortho - and para -benzyltoluene using VO x /TiO 2 based catalysts
A single methyl substituent strongly alters the partial oxidation of diphenylmethane and benzyltoluene regio-isomers over Sb-doped VO x /TiO 2 . DFT links their distinct reactivities to differences in catalyst-reactant electronic interactions.
- Open Access
- 14 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Hydrogen diffusion on metals: Full-Dimensional Ring Polymer Molecular Dynamics Rate Calculations
The diffusion of hydrogen atoms on nine different metals: Co, Ni, Cu, Rh, Pd, Ag, Ir, Pt, Au, has been simulated by ring polymer molecular dynamics. For Co, the (0001) surface facet has been chosen, while for all other metals, (100) surfaces are investigated. For the nine systems, message-passing atomic cluster expansion (MACE) machine-learned interatomic potentials (MLIPs) were set up by means of self-consistent biased fine-tunings. The H diffusion was sampled first with the MACE MP-0 foundation model by means of umbrella samplings along the diffusion path; then, a subset of sampled structures was recalculated by periodic density-functional theory (DFT) and the MACE was fine-tuned with the obtained reference data. This was repeated once to correct for biases of the foundation model concerning the sampling of configuration space. Thorough benchmarking revealed that the fine-tuned MLIPs were reliable and of high quality, also for situations not covered by the training set. The fine-tuned MACE MLIPs were then used to sample the full-dimensional diffusion rate constants with the Caracal program for temperatures between 20 and 300 K, in 10 K steps, and from them obtain the temperature-dependent diffusion coefficients. Crossover temperatures to the deep tunneling regime were calculated as well.
- 14 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessHydrogen diffusion on metals: Full-Dimensional Ring Polymer Molecular Dynamics Rate Calculations
The diffusion of hydrogen atoms on nine different metals: Co, Ni, Cu, Rh, Pd, Ag, Ir, Pt, Au, has been simulated by ring polymer molecular dynamics. For Co, the (0001) surface facet has been chosen, while for all other metals, (100) surfaces are investigated. For the nine systems, message-passing atomic cluster expansion (MACE) machine-learned interatomic potentials (MLIPs) were set up by means of self-consistent biased fine-tunings. The H diffusion was sampled first with the MACE MP-0 foundation model by means of umbrella samplings along the diffusion path; then, a subset of sampled structures was recalculated by periodic density-functional theory (DFT) and the MACE was fine-tuned with the obtained reference data. This was repeated once to correct for biases of the foundation model concerning the sampling of configuration space. Thorough benchmarking revealed that the fine-tuned MLIPs were reliable and of high quality, also for situations not covered by the training set. The fine-tuned MACE MLIPs were then used to sample the full-dimensional diffusion rate constants with the Caracal program for temperatures between 20 and 300 K, in 10 K steps, and from them obtain the temperature-dependent diffusion coefficients. Crossover temperatures to the deep tunneling regime were calculated as well.
- Open Access
- 15 August 2026
- Published by Springer Nature in npj Computational Materials
- Vol. 12 (1) , 273
Vibrational power spectra as a tool to benchmark universal machine-learning interatomic potentials for molecular systems: the OMOL-1k-MD data set
We present OMOL-1k-MD, a new dataset for the benchmark and training of universal machine-learning interatomic potentials (uMLIPs). It contains three independent ab initio molecular dynamics (AIMD) trajectories of 10 ps each for 1000 arbitrarily chosen neutral closed shell molecular systems from the OMOL25 dataset, calculated at the PBE level of theory at 300 K. In contrast to most other MLIP training or benchmark data sets, which are focused on local minimum structures, OMOL-1k-MD contains a total of 30 million structures sampled at room temperature. We benchmark several popular uMLIPs regarding their ability to reasonably reproduce the DFT dynamics. To this end, we compare the vibrational power spectra of the OMOL-1k-MD trajectories with uMLIP trajectories for the same set of structures. The comparison considers either the relative peak positions of different vibrations or the integrated vibrational free energies. This procedure enables a thorough benchmark and ranking of uMLIP performances apart from local minima. We found that the MACE MP-0 uMLIP performed best, followed by SevenNet and Orb OMat. The GFN2-xTB semiempirical method, however, performed better than all tested uMLIPs, proving the need for more off-equilibrium data in the parametrization of uMLIPs, where OMOL-1k-MD can be of high use.
- 15 August 2026
- Published by Springer Nature in npj Computational Materials
- Vol. 12 (1) , 273
Open AccessVibrational power spectra as a tool to benchmark universal machine-learning interatomic potentials for molecular systems: the OMOL-1k-MD data set
We present OMOL-1k-MD, a new dataset for the benchmark and training of universal machine-learning interatomic potentials (uMLIPs). It contains three independent ab initio molecular dynamics (AIMD) trajectories of 10 ps each for 1000 arbitrarily chosen neutral closed shell molecular systems from the OMOL25 dataset, calculated at the PBE level of theory at 300 K. In contrast to most other MLIP training or benchmark data sets, which are focused on local minimum structures, OMOL-1k-MD contains a total of 30 million structures sampled at room temperature. We benchmark several popular uMLIPs regarding their ability to reasonably reproduce the DFT dynamics. To this end, we compare the vibrational power spectra of the OMOL-1k-MD trajectories with uMLIP trajectories for the same set of structures. The comparison considers either the relative peak positions of different vibrations or the integrated vibrational free energies. This procedure enables a thorough benchmark and ranking of uMLIP performances apart from local minima. We found that the MACE MP-0 uMLIP performed best, followed by SevenNet and Orb OMat. The GFN2-xTB semiempirical method, however, performed better than all tested uMLIPs, proving the need for more off-equilibrium data in the parametrization of uMLIPs, where OMOL-1k-MD can be of high use.
- 29 July 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 22 (15) , 7752-7773
Self-Consistent Biased Fine-Tuning for Highly Accurate Reaction-Specific Machine-Learning Interatomic Potentials
An algorithm for the black-box generation of high-quality system-specific machine-learning interatomic potentials (MLIPs) for gas-phase reactions in the electronic ground state is presented. It relies on the self-consistent fine-tuning of an MLIP foundation model, where the message-passing atomic cluster expansion (MACE) is taken as an example, based on the data collected from biased samplings along the reaction coordinate of interest with the Caracal program package. The reaction is first sampled with the foundation model at different temperatures, and then the sampling is repeated with the fine-tuned model until the errors of selected energies and forces with respect to the high-level reference method fall below a chosen threshold. In this paper, this method is benchmarked systematically by alternating the amount of collected training data and the MACE MLIP architecture, such that an optimal compromise between speed and accuracy can be obtained. To make a direct comparison of full-dimensional reaction rate constants between MLIP and the reference method possible for the first time, two gas-phase reactions with analytical potential energy surfaces from the literature have been chosen: The internal proton transfer in malonaldehyde and the proton exchange between methane and an OH radical. In both cases, nuclear quantum effects are considered by ring-polymer molecular dynamics (RPMD). In line with this, it has been observed that the explicit inclusion of recrossing trajectories in the training set becomes important for the accurate parametrization of reversible reaction mechanisms. The results show that it is possible to parametrize high-quality reactive MLIPs without the need to select reference data manually and with a limited number of expensive quantum mechanical reference calculations.
- 29 July 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 22 (15) , 7752-7773
Self-Consistent Biased Fine-Tuning for Highly Accurate Reaction-Specific Machine-Learning Interatomic Potentials
An algorithm for the black-box generation of high-quality system-specific machine-learning interatomic potentials (MLIPs) for gas-phase reactions in the electronic ground state is presented. It relies on the self-consistent fine-tuning of an MLIP foundation model, where the message-passing atomic cluster expansion (MACE) is taken as an example, based on the data collected from biased samplings along the reaction coordinate of interest with the Caracal program package. The reaction is first sampled with the foundation model at different temperatures, and then the sampling is repeated with the fine-tuned model until the errors of selected energies and forces with respect to the high-level reference method fall below a chosen threshold. In this paper, this method is benchmarked systematically by alternating the amount of collected training data and the MACE MLIP architecture, such that an optimal compromise between speed and accuracy can be obtained. To make a direct comparison of full-dimensional reaction rate constants between MLIP and the reference method possible for the first time, two gas-phase reactions with analytical potential energy surfaces from the literature have been chosen: The internal proton transfer in malonaldehyde and the proton exchange between methane and an OH radical. In both cases, nuclear quantum effects are considered by ring-polymer molecular dynamics (RPMD). In line with this, it has been observed that the explicit inclusion of recrossing trajectories in the training set becomes important for the accurate parametrization of reversible reaction mechanisms. The results show that it is possible to parametrize high-quality reactive MLIPs without the need to select reference data manually and with a limited number of expensive quantum mechanical reference calculations.
- Open Access
- 25 May 2026
- Published by Scilight Press Pty Ltd in Advanced Characterization
- Vol. 1 (1) , 40-58
Reversible Structure Formation in 4,4-Bipyridine—Fe 2D Metal-Organic Frameworks on Au(111)
Surface-confined metal–organic frameworks (2D MOFs) provide a versatile platform for studying low-dimensional coordination chemistry and tunable molecular architectures at atomic and molecular levels. Here, we investigate the self-assembly of 4,4-bipyridine and Fe on Au(111) and reveal a coverage-dependent phase behavior governed by metal–ligand coordination and surface availability. In the absence of Fe, 4,4-bipyridine forms a weakly substrate-coupled molecular network stabilized by intermolecular interactions. Fe coordination induces a sequence of distinct two-dimensional architectures, ranging from dense three-fold-coordinated tripod networks to open Kagome lattices composed of hexagonally arranged metal centers bridged by molecular linkers. Using scanning probe microscopy, low-energy electron diffraction, and density-functional theory calculations, we identify three thermodynamically stable phases with different coordination numbers, symmetries, and molecular densities. Transformations between these phases are reversible and controlled by the Fe-to-ligand ratio. These findings demonstrate how subtle control over coordination chemistry and surface coverage enables programmable structural transitions in two-dimensional metal–organic frameworks.
- 25 May 2026
- Published by Scilight Press Pty Ltd in Advanced Characterization
- Vol. 1 (1) , 40-58
Open AccessReversible Structure Formation in 4,4-Bipyridine—Fe 2D Metal-Organic Frameworks on Au(111)
Surface-confined metal–organic frameworks (2D MOFs) provide a versatile platform for studying low-dimensional coordination chemistry and tunable molecular architectures at atomic and molecular levels. Here, we investigate the self-assembly of 4,4-bipyridine and Fe on Au(111) and reveal a coverage-dependent phase behavior governed by metal–ligand coordination and surface availability. In the absence of Fe, 4,4-bipyridine forms a weakly substrate-coupled molecular network stabilized by intermolecular interactions. Fe coordination induces a sequence of distinct two-dimensional architectures, ranging from dense three-fold-coordinated tripod networks to open Kagome lattices composed of hexagonally arranged metal centers bridged by molecular linkers. Using scanning probe microscopy, low-energy electron diffraction, and density-functional theory calculations, we identify three thermodynamically stable phases with different coordination numbers, symmetries, and molecular densities. Transformations between these phases are reversible and controlled by the Fe-to-ligand ratio. These findings demonstrate how subtle control over coordination chemistry and surface coverage enables programmable structural transitions in two-dimensional metal–organic frameworks.
- Open Access
- 14 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Self-consistent biased fine-tuning for highly accurate reaction-specific machine-learning interatomic potentials
An algorithm for the black-box generation of high-quality system-specific machinelearning interatomic potentials (MLIPs) for gas phase reactions in the electronic ground state is presented. It relies on the self-consistent fine-tuning of a MLIP foundation model, where the message-passing atomic cluster expansion (MACE) is taken as an example, based on data collected from biased samplings along the reaction coordinate of interest with the Caracal program. The reaction is first sampled with the foundation model at different temperatures, and then the sampling is repeated with the fine-tuned model until the errors of selected energies and gradients with respect to the high-level reference method falls below a chosen threshold. In this paper, this method is benchmarked systematically by alternating the amount of collected training data and the MACE MLIP architecture, such that an optimal compromise between speed and accuracy can be obtained. To make a direct comparison of reaction rate constants between MLIP and the reference method possible, two gas phase reactions with analytical potential energy surfaces from the literature have been chosen: The internal proton transfer in malonaldehyde and the proton exchange between methane and an
- 14 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessSelf-consistent biased fine-tuning for highly accurate reaction-specific machine-learning interatomic potentials
An algorithm for the black-box generation of high-quality system-specific machinelearning interatomic potentials (MLIPs) for gas phase reactions in the electronic ground state is presented. It relies on the self-consistent fine-tuning of a MLIP foundation model, where the message-passing atomic cluster expansion (MACE) is taken as an example, based on data collected from biased samplings along the reaction coordinate of interest with the Caracal program. The reaction is first sampled with the foundation model at different temperatures, and then the sampling is repeated with the fine-tuned model until the errors of selected energies and gradients with respect to the high-level reference method falls below a chosen threshold. In this paper, this method is benchmarked systematically by alternating the amount of collected training data and the MACE MLIP architecture, such that an optimal compromise between speed and accuracy can be obtained. To make a direct comparison of reaction rate constants between MLIP and the reference method possible, two gas phase reactions with analytical potential energy surfaces from the literature have been chosen: The internal proton transfer in malonaldehyde and the proton exchange between methane and an
- 6 November 2025
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 21 (22) , 11721-11746
utils4VASP: Setup and Evaluation of Electronic Structure and Machine-Learned Interatomic Potential Simulations with VASP
We present an open-source collection of scripts and programs for the setup, management and evaluation of calculations with the Vienna ab initio simulation package (VASP), called utils4VASP. It contains 14 independent Python scripts and Fortran programs, all with a unified and intuitive handling concept based on command-line arguments. A large repertoire of VASP calculations can be set up with some simple command line calls, including the generation and combination of POSCAR files for bulk and surface slab structures, the respective POTCAR and KPOINTS files and task-specific INCAR files. It further enables the management and evaluation of complex setups not covered by other utility scripts or programs so far, like split-up and parallelized frequency calculations for large structures, or the automated evaluation and visualization of core level energy or Bader partial charge calculations. Emphasis is made on surface-science related calculations, like the targeted placement of adsorbates on substrates or the visualization of scanning-tunneling microscope pictures. Finally, the generation and management of machine-learned interatomic potentials (MLIPs) based on VASP reference data is greatly simplified. Training data collected by on the fly learnings of VASP ML force fields can be effectively selected and combined, or exported into data formats used for Behler-Parrinello neural network or message-passing atomic cluster expansion (MACE) MLIPs. In this publication, all features within utils4VASP are presented concisely, giving both theoretical background and application examples.
- 6 November 2025
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 21 (22) , 11721-11746
utils4VASP: Setup and Evaluation of Electronic Structure and Machine-Learned Interatomic Potential Simulations with VASP
We present an open-source collection of scripts and programs for the setup, management and evaluation of calculations with the Vienna ab initio simulation package (VASP), called utils4VASP. It contains 14 independent Python scripts and Fortran programs, all with a unified and intuitive handling concept based on command-line arguments. A large repertoire of VASP calculations can be set up with some simple command line calls, including the generation and combination of POSCAR files for bulk and surface slab structures, the respective POTCAR and KPOINTS files and task-specific INCAR files. It further enables the management and evaluation of complex setups not covered by other utility scripts or programs so far, like split-up and parallelized frequency calculations for large structures, or the automated evaluation and visualization of core level energy or Bader partial charge calculations. Emphasis is made on surface-science related calculations, like the targeted placement of adsorbates on substrates or the visualization of scanning-tunneling microscope pictures. Finally, the generation and management of machine-learned interatomic potentials (MLIPs) based on VASP reference data is greatly simplified. Training data collected by on the fly learnings of VASP ML force fields can be effectively selected and combined, or exported into data formats used for Behler-Parrinello neural network or message-passing atomic cluster expansion (MACE) MLIPs. In this publication, all features within utils4VASP are presented concisely, giving both theoretical background and application examples.
- Open Access
- 28 October 2025
- Published by Wiley in Chemphyschem
- Vol. 26 (22) , e202500524
Site Preferences of Copper and Cobalt Monobenzo Porphyrins in a Trans‐Dibenzo Adsorption Structure on Cu(111)
Using scanning tunneling microscopy, Cu and Co tetraphenyl monobenzo porphyrins are used as probe molecules to better understand the T‐type interactions within well‐ordered islands of Cu and Co tetraphenyl trans‐dibenzo porphyrins on Cu(111). The islands are made up of molecular rows, held together by T‐type interactions between isoindole and phenyl rings of adjacent molecules. The monobenzo molecules are found to be depleted within the bulk of the molecular rows and enriched at the edges terminating the rows. By counting over 50 000 molecules and using equilibrium considerations, the T‐type interaction energies within the trans‐dibenzo islands are estimated and the derived values are compared to values previously calculated with density functional theory, which find very good agreement for Cu‐TPtdBP but less satisfying agreement for Co‐TPtdBP.
- 28 October 2025
- Published by Wiley in Chemphyschem
- Vol. 26 (22) , e202500524
Open AccessSite Preferences of Copper and Cobalt Monobenzo Porphyrins in a Trans‐Dibenzo Adsorption Structure on Cu(111)
Using scanning tunneling microscopy, Cu and Co tetraphenyl monobenzo porphyrins are used as probe molecules to better understand the T‐type interactions within well‐ordered islands of Cu and Co tetraphenyl trans‐dibenzo porphyrins on Cu(111). The islands are made up of molecular rows, held together by T‐type interactions between isoindole and phenyl rings of adjacent molecules. The monobenzo molecules are found to be depleted within the bulk of the molecular rows and enriched at the edges terminating the rows. By counting over 50 000 molecules and using equilibrium considerations, the T‐type interaction energies within the trans‐dibenzo islands are estimated and the derived values are compared to values previously calculated with density functional theory, which find very good agreement for Cu‐TPtdBP but less satisfying agreement for Co‐TPtdBP.