Andriy Sherehiy
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Andriy Sherehiy has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Dan O. Popa
Louisville Automation Research and Robotics Institute (LARRI), University of Louisville, Louisville, KY 40208, USA
3 shared publications - Ruoshi Zhang
Louisville Automation and Robotics Research Institute, University of Louisville, 1940 Arthur St., Louisville, KY 40208
3 shared publications - Daniel Sills
Louisville Automation and Robotics Research Institute, University of Louisville, 2210 S. Brook St., Louisville, KY 40208
2 shared publications - Jacek Bogdan Jasinski
University of Louisville
2 shared publications Abdelilah Safir
Electro-Optics Research Institute & Nanotechnology Center, University of Louisville, Louisville, KY, United States
1 shared publicationAlexander Curry
University of Louisville,Louisville Automation & Robotics Research Institute,Kentucky,USA
1 shared publication
Latest Publications
- 21 November 2024
- Published by ASME International in Journal of Micro and Nano Science and Engineering
- Vol. 13 (1) , 1-11
Rapid Prototyping of Multiscale Flexible Printed Circuit Boards With NeXus, a Robotic Additive Manufacturing System
This paper demonstrates the NeXus system, a multiscale robotic additive manufacturing platform developed at the Louisville Automation and Robotics Research Institute, as a rapid prototyping tool through additively manufacturing a multilayer flexible printed circuit board (FPC) with a printed strain sensor and soldered surface mounted devices (SMD). Manufacturing of the demonstrator requires the application and curing of multiple materials with specialized properties, tools for automated assembly, and software advances to streamline the process enabling the use of industry-standardized programs to command the NeXus system. Additive manufacturing processes supported by the NeXus include aerosol jet printing (AJP) for fine feature silver conducting lines, direct write ink-jet printing for insulating materials, and intense pulsed light (IPL) for curing materials between depositions. The NeXus system transports and manipulates parts using a six-degree-of-freedom (DOF) high-precision positioner. Solder paste deposition and pick-and-place (PnP) procedures are performed by a 4DOF Selective Compliance Articulated Robot Arm (SCARA). Conversion methods between traditional printed circuit board (PCB) design software and production-ready command scripts were developed to translate basic drawings into command scripts. Multilayer structures with AJP 50-μm wide lines, an insulating bridge with a thickness of around 100 μm, and SMDs soldered to silver AJP pads were integrated within the demonstrator. An operational amplifier and other SMDs reduce the complexity of the accompanying control circuit and amplify the sensor's response by 1830 times. The successful fabrication of the demonstrator FPC highlights the rapid prototyping ability of the NeXus system.
- 21 November 2024
- Published by ASME International in Journal of Micro and Nano Science and Engineering
- Vol. 13 (1) , 1-11
Rapid Prototyping of Multiscale Flexible Printed Circuit Boards With NeXus, a Robotic Additive Manufacturing System
This paper demonstrates the NeXus system, a multiscale robotic additive manufacturing platform developed at the Louisville Automation and Robotics Research Institute, as a rapid prototyping tool through additively manufacturing a multilayer flexible printed circuit board (FPC) with a printed strain sensor and soldered surface mounted devices (SMD). Manufacturing of the demonstrator requires the application and curing of multiple materials with specialized properties, tools for automated assembly, and software advances to streamline the process enabling the use of industry-standardized programs to command the NeXus system. Additive manufacturing processes supported by the NeXus include aerosol jet printing (AJP) for fine feature silver conducting lines, direct write ink-jet printing for insulating materials, and intense pulsed light (IPL) for curing materials between depositions. The NeXus system transports and manipulates parts using a six-degree-of-freedom (DOF) high-precision positioner. Solder paste deposition and pick-and-place (PnP) procedures are performed by a 4DOF Selective Compliance Articulated Robot Arm (SCARA). Conversion methods between traditional printed circuit board (PCB) design software and production-ready command scripts were developed to translate basic drawings into command scripts. Multilayer structures with AJP 50-μm wide lines, an insulating bridge with a thickness of around 100 μm, and SMDs soldered to silver AJP pads were integrated within the demonstrator. An operational amplifier and other SMDs reduce the complexity of the accompanying control circuit and amplify the sensor's response by 1830 times. The successful fabrication of the demonstrator FPC highlights the rapid prototyping ability of the NeXus system.
- 21 November 2024
- Published by ASME International in Journal of Micro and Nano Science and Engineering
- Vol. 13 (1) , 1-37
Aerosol Jet and Inkjet Printing Methods for Die-Level Packaging of Custom MEMS Devices
In this study, we propose an alternative, low-cost, packaging method using both inkjet and aerosol jet printing (AJP) to fabricate functional interconnects for custom die-level packages assembled on printed circuit boards (PCBs). Our process involves the manufacturing of a stacked structure with insulating and conducting layers, fabricated using inkjet and aerosol jet printing, respectively. In the first part of the study, we characterized UV adhesive deposition on the standard resin-coated PCB to acquire the optimal parameters necessary for the fabrication of the insulating layer with thicknesses around 100 μm. In the second part of our study, we developed a precise method for printing silver conducting lines using an aerosol jet printer, enabling the realization of structures with features as small as 50 μm on nonplanar surfaces. The insulating part of the microelectromechanical systems (MEMS)/PCB structure serves as a ramp ensuring continuity of the aerosol jet printed connection between the PCB and the Si die. A 1 cm × 1 cm Si chip with a custom MEMS microrobot was used to demonstrate the feasibility and flexibility of our approach in practice. After fabrication, we evaluated the interconnects for conductivity and repeatability. The packaging and inspection process was carried out using Nexus, a unique robotic system integrating additive manufacturing, robotic transport, and metrology. The results show that we successfully fabricated printed interconnects between copper PCB pads and Si die cleanroom fabricated gold pads, while electrical characterization revealed resistances in the range of 1–10 Ω. Our approach can be utilized in the manufacturing of electrical interconnects for custom devices on different substrates, including traditional and flexible PCBs. Furthermore, the applied printing techniques enable the use of other insulating or conducting inks and the formation of structures of custom geometries across a wide range of scales—20 μm to 1 mm.
- 21 November 2024
- Published by ASME International in Journal of Micro and Nano Science and Engineering
- Vol. 13 (1) , 1-37
Aerosol Jet and Inkjet Printing Methods for Die-Level Packaging of Custom MEMS Devices
In this study, we propose an alternative, low-cost, packaging method using both inkjet and aerosol jet printing (AJP) to fabricate functional interconnects for custom die-level packages assembled on printed circuit boards (PCBs). Our process involves the manufacturing of a stacked structure with insulating and conducting layers, fabricated using inkjet and aerosol jet printing, respectively. In the first part of the study, we characterized UV adhesive deposition on the standard resin-coated PCB to acquire the optimal parameters necessary for the fabrication of the insulating layer with thicknesses around 100 μm. In the second part of our study, we developed a precise method for printing silver conducting lines using an aerosol jet printer, enabling the realization of structures with features as small as 50 μm on nonplanar surfaces. The insulating part of the microelectromechanical systems (MEMS)/PCB structure serves as a ramp ensuring continuity of the aerosol jet printed connection between the PCB and the Si die. A 1 cm × 1 cm Si chip with a custom MEMS microrobot was used to demonstrate the feasibility and flexibility of our approach in practice. After fabrication, we evaluated the interconnects for conductivity and repeatability. The packaging and inspection process was carried out using Nexus, a unique robotic system integrating additive manufacturing, robotic transport, and metrology. The results show that we successfully fabricated printed interconnects between copper PCB pads and Si die cleanroom fabricated gold pads, while electrical characterization revealed resistances in the range of 1–10 Ω. Our approach can be utilized in the manufacturing of electrical interconnects for custom devices on different substrates, including traditional and flexible PCBs. Furthermore, the applied printing techniques enable the use of other insulating or conducting inks and the formation of structures of custom geometries across a wide range of scales—20 μm to 1 mm.
- 10 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
PEDOT: PSS Polymer Aerosol Jet-printing for Robotic Skin Sensors
Robot skin sensors are being developed to improve the tactile perception that comes with physical touch. This is desired as it enhances the interaction between robots and humans. In this publication, we present a process for improving the deposition of PEDOT: PSS using Aerosol jet printing technology. Previously, we deposited PEDOT: PSS with the MEMS fabrication techniques in the cleanroom. The PEDOT: PSS, an organic polymer that gives the robot skin sensors their piezoresistive ability, is deposited on the designated microfabricated sensor electrodes, significantly cutting down the manufacturing time. Testing of the robot skin sensors is done on an automated testing station having a force plunger and an integrated circuit. The results display the resistance values measured across the sensors and their tactile responses to applied strain.
- 10 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
PEDOT: PSS Polymer Aerosol Jet-printing for Robotic Skin Sensors
Robot skin sensors are being developed to improve the tactile perception that comes with physical touch. This is desired as it enhances the interaction between robots and humans. In this publication, we present a process for improving the deposition of PEDOT: PSS using Aerosol jet printing technology. Previously, we deposited PEDOT: PSS with the MEMS fabrication techniques in the cleanroom. The PEDOT: PSS, an organic polymer that gives the robot skin sensors their piezoresistive ability, is deposited on the designated microfabricated sensor electrodes, significantly cutting down the manufacturing time. Testing of the robot skin sensors is done on an automated testing station having a force plunger and an integrated circuit. The results display the resistance values measured across the sensors and their tactile responses to applied strain.
- 19 August 2015
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 119 (34) , 20150-20155
In Situ Transport Measurements and Band Gap Formation of Fluorinated Graphene
- 19 August 2015
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 119 (34) , 20150-20155
In Situ Transport Measurements and Band Gap Formation of Fluorinated Graphene
- 1 May 2014
- Published by Elsevier in Journal of Power Sources
- Vol. 253, 404-411
Optimization of Multi-Walled Carbon Nanotube based CF electrodes for improved primary and secondary battery performances
- 1 May 2014
- Published by Elsevier in Journal of Power Sources
- Vol. 253, 404-411
Optimization of Multi-Walled Carbon Nanotube based CF electrodes for improved primary and secondary battery performances
- 30 April 2013
- Published by Elsevier in Diamond and Related Materials
- Vol. 34, 1-8
Thermionic emission properties and the work function determination of arrays of conical carbon nanotubes
- 30 April 2013
- Published by Elsevier in Diamond and Related Materials
- Vol. 34, 1-8
Thermionic emission properties and the work function determination of arrays of conical carbon nanotubes