IMIker Marcaida

Iker Marcaida

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Iker Marcaida has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Raman imaging to quantify the thermal transformation degree of Pompeian yellow ochre caused by the 79 AD Mount Vesuvius eruption

    by Iker Marcaida, Maite Maguregui, Héctor Morillas, Silvia Perez-Diez, Juan Manuel Madariaga

    Most of the wall paintings from Pompeii are decorated with red and yellow colors but the thermal impact of 79 AD Mount Vesuvius eruption promoted the partial transformation of some yellow-painted areas into red. The aim of this research is to develop a quantitative Raman imaging methodology to relate the transformation percentage of yellow ochre (goethite, α-FeOOH) into red color (hematite, α-Fe2O3) depending on the temperature, in order to apply it and estimate the temperature at which the pyroclastic flow impacted the walls of Pompeii. To model the thermal impact that took place in the year 79 AD, nine wall painting fragments recovered in the archeological site of Pompeii and which include yellow ochre pigment were subjected to thermal ageing experiments (exposition to temperatures from 200 to 400 °C every 25 °C). Before the experiments, elemental information of the fragments was obtained by micro-energy dispersive X-ray fluorescence (μ-ED-XRF). The fragments were characterized before and after the exposition using Raman microscopy to monitor the transformation degree from yellow to red. The quantitative Raman imaging methodology was developed and validated using synthetic pellets of goethite and hematite standards. The results showed almost no transformation (0.5% ± 0.4) at 200 °C. However, at 225 °C, some color transformation (26.9% ± 2.8) was observed. The most remarkable color change was detected at temperatures between 250 °C (transformation of 46.7% ± 1.7) and 275 °C (transformation of 101.1% ± 1.2). At this last temperature, the transformation is totally completed since from 275 to 400 °C the transformation percentage remained constant.


  • Open Access

    In situ non-invasive multianalytical methodology to characterize mosaic tesserae from the House of Gilded Cupids, Pompeii

    by Iker Marcaida, Maite Maguregui, Héctor Morillas, Nagore Prieto-Taboada, Marco Veneranda, Silvia Fdez-Ortiz de Vallejuelo, Alberta Martellone, Bruno De Nigris, Massimo Osanna, Juan Manuel Madariaga

    Mosaics, one of the most important decorative artworks in the Roman culture, were usually elaborated with a set of tesserae joined with lime or others binders to form geometric or figurative decorations. The identification of both substrate and colored compounds of the tesserae is a challenge for chemists and archaeologists. In this work, two mosaics present in the House of Gilded Cupids from the Archaeological Park of Pompeii were analyzed in situ by non destructive techniques. Raman and Diffuse Reflectance Infrared Fourier Transform (DRIFT) spectroscopies were used for the molecular and mineralogical characterization, and hand-held energy dispersive X-ray fluorescence (HH-EDXRF) spectrometry and Laser Induced Breakdown Spectroscopy (LIBS) for the elemental analysis. LIBS in-depth analysis was performed to obtain insights about the thickness of the pictorial layer determining that the thickness of red and orange pictorial layers was higher than 140 μm. The results showed that white tesserae were mainly composed by calcite, while local black colored volcanic rocks were used to manufacture black tesserae. Red and orange tesserae were composed by a calcite-based matrix with a hematite pictorial layer applied over it. Orange color was obtained by diluting hematite in the calcite matrix. Principal component analysis (PCA) of the XRF data was performed to observe differences and/or similarities between the analyzed mosaics; the samples projection of the PCA showed clear groupings.


  • Evaluating sulfates and nitrates as enemies of the recent constructions: Spectroscopic and thermodynamical study

    by Héctor Morillas, Settakorn Upasen, Maite Maguregui, Iker Marcaida, Euler Gallego‐Cartagena, Marcos L.S. Oliveira, Luis F.O. Silva

    Salt crystallization is one of the major problems currently faced by the field of architecture and construction. Its effects are devastating to the extent that they may even lead to loss of material. Although many innovative and resistant materials have been developed in the last years, in most of the constructions, salt crystallization is a persistent problem. Salts crystallizations are formed by the dissolution and subsequent precipitation of the soluble salts present in the material itself or due to the formation of new ones because of the reaction between original components of the building materials with salts coming from infiltration waters or with acid aerosols present in the atmosphere. Among others, some of the most common salts that can crystallize in the building materials are nitrates and sulfates. Both of them are soluble compounds, which can mobilize throughout the material easily, reprecipitate, and generate volume changes responsible for fissures, fractures, and even the loss of building material. In this work, a specific study of salts crystallizations in a recent construction erected in 2013 in Amorebieta (Basque Country, North of Spain) using a different kind of materials has been studied. The materials affected by salts are joint mortars, which in a first step were characterized by X‐ray diffraction and Raman microscopy to determine the mineralogical composition. In a second step, a soluble salts tests by ion chromatography was applied to approach quantitatively the impact of the salts. Finally, in a third step, the reactions that give rise to the decay products (thenardite, nitrocalcite, and/or epsomite mainly) were proposed and confirmed through a thermodynamic modelling.


  • Open Access

    In-situ analytical study of bricks exposed to marine environment using hand-held X-ray fluorescence spectrometry and related laboratory techniques

    by Héctor Morillas, Cristina García-Florentino, Iker Marcaida, Maite Maguregui, Gorka Arana, Luis F.O. Silva, Juan Manuel Madariaga


  • Open Access

    In-situ multi-analytical characterization of original and decay materials from unique wall mirrors in the House of Gilded Cupids, Pompeii

    by Marco Veneranda, Silvia Fdez-Ortiz de Vallejuelo, Nagore Prieto-Taboada, Maite Maguregui, Iker Marcaida, Héctor Morillas, Alberta Martellone, Bruno de Nigris, Massimo Osanna, Kepa Castro, et al.

    The House of Gilded Cupids (Regio VI, Insula 16, 7, 38) was unquestionably one of the most important residences of Ancient Pompeii, where important archaeological artefacts such as mural paintings, mosaics, sculptures and lalariums were rediscovered. This work characterizes two wall mirrors that, together with those recovered from the House of Efebo and the Domus of Euplia, represent the only ones found in the archaeological site of Pompeii. The 2015 and 2016 expeditions of the Analytica Pompeiana Universitatis Vasconicae project performed an in situ multi-analytical study, using only portable non-destructive analytical techniques. Molecular data provided by Raman spectroscopy suggested obsidian was the reflective matrix for both mirrors. Elemental data provided by energy dispersive X-ray fluorescence and laser induced breakdown spectroscopy (LIBS) systems were concordant with Raman spectroscopic results, enabling the detection of Ca, K, Al and Na as the main elements included in the Si matrix characteristic of obsidian igneous rocks. The LIBS data confirmed the presence of obsidian hydration layers. All techniques were used to investigate the degraded white and yellow crusts of the mirrors. Gypsum (CaSO4·2H2O) and nitrocalcite (Ca(NO3)2·4H2O) were identified in the white areas and gypsum and goethite (α-FeOOH) in the yellow crusts. LIBS depth profiling on the white crusts found a layer of nitrocalcite on top of the gypsum layer. Gypsum and goethite were proposed to form after partial dissolution of the mortars patches (with high iron contents) used in modern restorations around the mirrors, followed by a reprecipitation on the surface of the mirrors. Nitrocalcite was proposed to form after the attack of atmospheric NOx on gypsum crusts. These results represent the first analytical work focused on the study of these unique mirrors and provide the knowledge needed for defining more adequate conservation treatments.


  • Raman microscopy as a tool to discriminate mineral phases of volcanic origin and contaminations on red and yellow ochre raw pigments from Pompeii

    by Iker Marcaida, Maite Maguregui, Héctor Morillas, Marco Veneranda, Nagore Prieto‐Taboada, Silvia Fdez‐Ortiz de Vallejuelo, Juan Manuel Madariaga

    Raman microscopy is a molecular technique that is able to detect compounds that are present in the samples at minor/trace levels thanks to the precise focusing on particles of interest. The detection will also depend on the Raman scattering of the measured compound. Moreover, due to the nondestructive character of the measurements, this technique is one of the most used when samples under study belong to the arts and archaeological fields. Among the different archaeological sites in the world, Pompeii is one of the most important ancient cities. In this work, Raman microscopy—supported by X‐ray diffraction—has been used to detect traces of mineralogical phases of volcanic origin and contaminations in red and yellow ochre pigments. These samples were buried for thousands of years and recovered from the archaeological site of Pompeii in their original bowls. On the one hand, regarding the characteristic mineral phases of volcanic origin, the obtained results showed the presence of langite [Cu4 (SO4)(OH)6·2H2O], jarosite [KFe3 (SO4)2(OH)6], atacamite [Cu2Cl (OH)3], and anatase (β‐TiO2), a polymorph of titanium oxide found in igneous rocks. On the other hand, contamination compounds such as Egyptian or Pompeian blue (CaCuSi4O10) and huntite [Mg3Ca (CO3)4] were also identified. Some of the compounds identified by micro‐Raman spectroscopy could not be detected using X‐Ray diffraction and vice versa. Therefore, it was corroborated the necessity of using more than one unique technique in order to obtain a complete information about the molecular composition of the ochre pigments under study.


  • In situ non-invasive characterization of the composition of Pompeian pigments preserved in their original bowls

    by Iker Marcaida, Maite Maguregui, Héctor Morillas, Nagore Prieto-Taboada, Silvia Fdez-Ortiz de Vallejuelo, Marco Veneranda, Juan Manuel Madariaga, Alberta Martellone, Bruno De Nigris, Massimo Osanna


  • Multianalytical approach to evaluate deterioration products on cement used as consolidant on lithic material: The case of Tello Obelisk, Lima (Peru)

    by Héctor Morillas, Maite Maguregui, Gladys Huallparimachi, Iker Marcaida, Cristina García-Florentino, Luis Lumbreras, Fernando Astete, Juan Manuel Madariaga


  • Trentepohlia algae biofilms as bioindicator of atmospheric metal pollution

    by Cristina García-Florentino, Maite Maguregui, Héctor Morillas, Iker Marcaida, Isabel Salcedo, Juan Manuel Madariaga


  • Characterization of the Inkaterra rock shelter paintings exposed to tropical climate (Machupicchu, Peru)

    by Héctor Morillas, Maite Maguregui, José Bastante, Gladys Huallparimachi, Iker Marcaida, Cristina García-Florentino, Fernando Astete, Juan Manuel Madariaga