Rosa Busquets

Rice husk (RH) is a renewable siliceous lignocellulosic waste providing a unique, greener and less toxic alternative to conventional synthetic polymeric precursors in the production of carbon-based materials for biomedical applications. In this work we studied the porous structure of RH-lignin-based activated carbon produced in the form of honeycomb carbon monoliths and assessed their potential as hemoadsorbents for blood purification in the treatment of patients with serious medical conditions, such as kidney failure and sepsis. To determine their clinical suitability for such an application, the hemocompatibility and cytotoxicity of the monoliths were investigated using the standard ISO guidelines. The monoliths did not cause any changes in the cell viability or cell lysis. High micro/mesoporosity and surface chemistry of the initial monolith-C, N- and P-doped nanostructured carbon honeycomb monoliths were established by low-temperature nitrogen adsorption (LTNA) studies, mercury porosimetry data (MIP), SEM/EDS analysis and FT-IR spectroscopy. The micro-mesoporous, activated carbon-based filtration/adsorbent prototype devices, in the form of three-dimensional (3D) carbon matrix, functionalized with ion-exchange amino- and phosphate groups and encased in polyolefin heat shrink cable sleeve, have been developed with the capacity to remove protein-bound uremic toxins (PBUTs), such us PCS and IS, as well as inflammatory cytokines (IL-6 and IL-8) from human plasma in a flowing model system. The ammoxidized monolith-N, derived from the monolith-C, had the highest removal efficiency (40.05% for PCS, and 28.4% for IL-6). By contrast, phosphorylated monolith-P demonstrated the highest removal efficiency (54.62% for IS, and 54.4% for IL-8), whilst the monolith-C has the lowest removal efficiency for these adsorbates. These results do not correlate with the LTNA and MIP study results, suggesting that the interaction of surface chemical functional groups with the solutes play key roles in the adsorption mechanism. The ion-exchange mechanism of PBUTs and inflammatory cytokine chemisorption by the monoliths, modified with surface N- and P-containing functional groups, has been proposed.

Activated carbons are usually prepared from natural precursors (e.g., fruit stones or nutshells) by carbonization and activation processes carried out at 400–1000 °C. They exhibit well-developed porosity, and chemical activation introduces hydrophilic functional groups on their surface, providing excellent sorption properties. However, the high temperatures required during thermal treatment increase production costs. In this work, cost-reducing methods for preparing carbon sorbents are proposed. Carbonization of H₃PO₄ activated waste pistachio nutshells was performed using classical pyrolysis (500 or 550 °C, 30 min, N₂ atmosphere) and microwave treatment (power 1000 W, 20 min). The properties of the synthesized carbons were characterized using thermogravimetry and spectroscopic techniques including infrared (ATR), Raman, photoelectron (XPS) spectroscopies, and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS). Porous structure parameters were determined using nitrogen adsorption experiments. The efficiency of Pb²⁺ removal from spiked ultrapure, tap and river water was evaluated by batch sorption experiments and inductively coupled plasma–mass spectrometry. The most porous carbons were those prepared at 500 and 550 °C, with specific surface areas of 910 and 256 m²/g, respectively. Surface phosphates increased the Pb²⁺ sorption efficiency to 99% from ultrapure water, at an initial concentration of 300 µg Pb²⁺/L. The material obtained with the microwave method was not fully carbonized and remained nonporous, but it also exhibited 99% Pb²⁺ uptake from ultrapure water due to the presence of oxygen-containing surface groups. The Pb²⁺ removal from spiked tap and river water reached up to 84% and 94%, respectively, at the spiking level of 300 µg Pb²⁺/L.

This study investigates the transport and retention of microplastic fibres (MFs) in slow sand filtration (SSF) systems using coarse and fine sand media under varying flow conditions. SSF is one of the most energy-efficient and cost-effective tertiary treatment methods. This study examined the performance of SSF for treating washing machine effluents heavily contaminated with MFs, such as those from washing machine discharge. Fine sand filters (with effective grain size of 0.2 mm) consistently retained significantly fewer MFs in the effluent than coarse sand filters (with an effective grain size of 0.6 mm), by a factor of 1.3 ± 0.2, with retention occurring predominantly within the upper 0–10 cm of the filter bed, highlighting the dominant role of the surface layer in MF capture. Between 83.9% and 93.6% of MFs in the filter effluents were 10–50 μm in length, with 10–20 μm fibres forming the dominant fraction across filtration rates of 5, 10, and 20 cm/h. Increasing filtration rate promoted deeper MF penetration into the filter bed, reduced overall retention, and increased MF breakthrough. Dissolved organic carbon removal was slightly higher in fine sand filters than in coarse sand filters, and effluent pH increased modestly with longer retention times. The highest MF removal efficiencies were achieved at the lowest filtration rate (5 cm/h), where removal reached 92.0% and 95.0% for coarse and fine sand, respectively. These trends are consistent with a mechanistic interpretation in which MF transport and retention are governed by interception, straining, and limited diffusion within the porous media, rather than simple size exclusion. SSF therefore represents a promising low-energy treatment option for mitigating MF release from wastewater effluents, particularly for fibres larger than 10 μm.

P-cresol, indole and indole-3-acetic acid (IAA) are catabolites of amino acids, formed by the gut microbiome. Most of these aromatic hydrocarbon derivatives are excreted by the colon before reentering the body to form “exogenous” protein-bound uremic toxins (PBUTs), which aggravate chronic kidney disease (CKD). Removal efficiencies of these PBUT precursors from model phosphate-buffered saline solutions by three different surface-modified nanoporous carbon adsorbents (PCs) were studied. PCs were produced by physicochemical and/or acid base activation of carbonized rice husk waste. Removal rates achieved values of 32–96% within a 3 h contact time. High micro/mesoporosity and surface chemistry of the N- and P-doped biochars were established by N₂ adsorption studies, SEM/EDS analysis, XPS and FT-IR-spectroscopy. The ammoxidized PC-N1 had the highest adsorption capacity (1.97 mmol/g for IAA, 2.43 mmol/g for p-cresol and 2.42 mmol/g for indole), followed by “urea-nitrified” PC-N2, whilst the phosphorylated PC-P demonstrated the lowest adsorption capacity for these solutes. These results do not correlate with the total pore volume values for PC-N2 (0.91 cm³/g) < PC-P (1.56 cm³/g) < PC-N1 (1.84 cm³/g), suggesting that other parameters such as the micropore volume (PC-N1 > PC-N2 > PC-P) and the interaction of surface chemical functional groups with the solutes play key roles in the adsorption mechanism. N-doped PC-N1 and PC-N2 have basic functional groups with higher affinity with acidic IAA and p-cresol. The ion-exchange mechanism of phenolic and indolic compound chemisorption by nanoporous carbon adsorbents, modified with surface N- and P-containing functional groups, has been proposed.

This study investigated the pollution level and assessed potential human health risk of trace elements in soil from Apo Mechanic Village, Gudu Market, and Goza Municipal dumpsite in Abuja, Nigeria where primitive recycling and recovery of valuable materials, open burning, dismantling, and dumping of wastes are being carried out. A total of 56 soil samples were collected from the three study sites and samples from their corresponding control sites, and analyzed for Zn, Cd, Cu, Ni, Pb, and Cr. The result showed that the element concentrations at the three study sites were significantly higher (P < 0.05) than their respective control sites, indicating the influence of waste recycling, dismantling, burning, and dumping activities at the sites. The average pollution load index (PLI) at the sites ranged from 5.80 to 37.09 indicating that the sites are highly polluted, with Cd and Pb being the highest contributors. Human health risk assessment revealed that there is a potential non-carcinogenic risk of Pb in adults and children through ingestion across the three study sites, and Pb in adults via dermal contact across the sites. There is also a non-carcinogenic risk of Cd and Ni through ingestion in children at the Apo site. Extremely high carcinogenic risk of Cr was found for both adults and children at all the three study sites, and carcinogenic risk of Cd in children at Apo and Goza sites and Pb in children at Goza site. This calls for an urgent need to enforce environmental regulations and prevention and monitoring of the crude and primitive waste dumping, dismantling, and burning activities at these sites as the investigated elements, particularly Pb, Cd, and Cr posed non-cancer and cancer health risks to workers and nearby residents.

This Assessment Update by the Environmental Effects Assessment Panel (EEAP) of the United Nations Environment Programme (UNEP) addresses the interacting effects of changes in stratospheric ozone, solar ultraviolet (UV) radiation, and climate on the environment and human health. These include new modelling studies that confirm the benefits of the Montreal Protocol in protecting the stratospheric ozone layer and its role in maintaining a stable climate, both at low and high latitudes. We also provide an update on projected levels of solar UV-radiation during the twenty-first century. Potential environmental consequences of climate intervention scenarios are also briefly discussed, illustrating the large uncertainties of, for example, Stratospheric Aerosol Injection (SAI). Modelling studies predict that, although SAI would cool the Earth’s surface, other climate factors would be affected, including stratospheric ozone depletion and precipitation patterns. The contribution to global warming of replacements for ozone-depleting substances (ODS) are assessed. With respect to the breakdown products of chemicals under the purview of the Montreal Protocol, the risks to ecosystem and human health from the formation of trifluoroacetic acid (TFA) as a degradation product of ODS replacements are currently de minimis. UV-radiation and climate change continue to have complex interactive effects on the environment due largely to human activities. UV-radiation, other weathering factors, and microbial action contribute significantly to the breakdown of plastic waste in the environment, and in affecting transport, fate, and toxicity of the plastics in terrestrial and aquatic ecosystems, and the atmosphere. Sustainability demands continue to drive industry innovations to mitigate environmental consequences of the use and disposal of plastic and plastic-containing materials. Terrestrial ecosystems in alpine and polar environments are increasingly being exposed to enhanced UV-radiation due to earlier seasonal snow and ice melt because of climate warming and extended periods of ozone depletion. Solar radiation, including UV-radiation, also contributes to the decomposition of dead plant material, which affects nutrient cycling, carbon storage, emission of greenhouse gases, and soil fertility. In aquatic ecosystems, loss of ice cover is increasing the area of polar oceans exposed to UV-radiation with possible negative effects on phytoplankton productivity. However, modelling studies of Arctic Ocean circulation suggests that phytoplankton are circulating to progressively deeper ocean layers with less UV irradiation. Human health is also modified by climate change and behaviour patterns, resulting in changes in exposure to UV-radiation with harmful or beneficial effects depending on conditions and skin type. For example, incidence of melanoma has been associated with increased air temperature, which affects time spent outdoors and thus exposure to UV-radiation. Overall, implementation of the Montreal Protocol and its Amendments has mitigated the deleterious effects of high levels of UV-radiation and global warming for both environmental and human health.