Ricardo Jorge Santos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ricardo Jorge Santos has a total of 121 co-authors. Here are the top co-authors by number of shared publications:
- José Carlos B. Lopes
LSRE-LCM, ALiCE, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
34 shared publications - Madalena Maria Dias
Universidade do Porto
27 shared publications - Claudio Pereira Da Fonte
University of Manchester
14 shared publications - Margarida S. C. A. Brito
LSRE-LCM, ALiCE, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
14 shared publications - Isabel S. Fernandes
Univ Porto, Fac Engn, LSRE, LCM, Rua Dr Roberto Frias, P-4200465 Porto, Portugal
8 shared publications - Joana Matos
Faculdade de Engenharia da Universidade do Porto
7 shared publications
Latest Publications
- Open Access
- 12 October 2026
- Published by Elsevier in Chemical Engineering and Processing - Process Intensification
- Vol. 230
Modelling and validation of a periodic flow CFD model for gas-liquid mesostructured continuous reactors
- 12 October 2026
- Published by Elsevier in Chemical Engineering and Processing - Process Intensification
- Vol. 230
Open AccessModelling and validation of a periodic flow CFD model for gas-liquid mesostructured continuous reactors
- Open Access
- 28 September 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 234, 1050-1067
CFD design of the unit cell of a prismatic mesostructured reactor for intensified secondary flow
- 28 September 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 234, 1050-1067
Open AccessCFD design of the unit cell of a prismatic mesostructured reactor for intensified secondary flow
- 19 June 2026
- Published by The CACHE Foundation, Inc.
- Vol. 6, 1494-1501
Process-Intensified Oscillatory Opposed-Jet Mixers: Mixing Quantification and Operational Guidelines
This work presents guidelines for controlling and intensifying mixing in oscillatory opposed-jet mixers, focusing on Confined Impinging Jets (CIJs) as a model system where flow behavior is primarily governed by oscillatory parameters, decoupled from geometric complexity. Computational Fluid Dynamics (CFD) simulations were used to investigate the effects of oscillation amplitude and frequency on mixing. The results show that at high amplitudes, mixing is robust across a broad frequency range, as energy injection is sufficient to promote vortex formation and their propagation to the reactor’s outlet. At low amplitudes, mixing is highly sensitive to the oscillation frequency and occurs only near the resonance frequency, the specific frequency at which the flow's response to the applied oscillation is maximized. At low amplitude, lower frequencies fail to inject sufficient energy, while higher frequencies promote flow segregation. Remarkably, effective vortex propagation and mixing were achieved even at very low net Reynolds numbers (Re_net=25), increasing the residence time from 0.042 s at Re_net=300 to 0.5 s at Re_net=25. Two quantitative mixing metrics corroborate the qualitative flow observations and were instrumental in defining practical guidelines for process intensification. These findings provide new insights into how oscillatory forcing can be tuned to control mixing scales, enabling efficient mixing under a wide range of operating conditions, including shear-sensitive processes. The study offers a foundation for the model-based design and optimization of intensified static mixers, linking oscillation parameters, Reynolds number, and residence time to application-specific mixing performance.
- 19 June 2026
- Published by The CACHE Foundation, Inc.
- Vol. 6, 1494-1501
Process-Intensified Oscillatory Opposed-Jet Mixers: Mixing Quantification and Operational Guidelines
This work presents guidelines for controlling and intensifying mixing in oscillatory opposed-jet mixers, focusing on Confined Impinging Jets (CIJs) as a model system where flow behavior is primarily governed by oscillatory parameters, decoupled from geometric complexity. Computational Fluid Dynamics (CFD) simulations were used to investigate the effects of oscillation amplitude and frequency on mixing. The results show that at high amplitudes, mixing is robust across a broad frequency range, as energy injection is sufficient to promote vortex formation and their propagation to the reactor’s outlet. At low amplitudes, mixing is highly sensitive to the oscillation frequency and occurs only near the resonance frequency, the specific frequency at which the flow's response to the applied oscillation is maximized. At low amplitude, lower frequencies fail to inject sufficient energy, while higher frequencies promote flow segregation. Remarkably, effective vortex propagation and mixing were achieved even at very low net Reynolds numbers (Re_net=25), increasing the residence time from 0.042 s at Re_net=300 to 0.5 s at Re_net=25. Two quantitative mixing metrics corroborate the qualitative flow observations and were instrumental in defining practical guidelines for process intensification. These findings provide new insights into how oscillatory forcing can be tuned to control mixing scales, enabling efficient mixing under a wide range of operating conditions, including shear-sensitive processes. The study offers a foundation for the model-based design and optimization of intensified static mixers, linking oscillation parameters, Reynolds number, and residence time to application-specific mixing performance.
- Open Access
- 6 May 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 230, 649-666
A stochastic surrogate mathematical framework to describe the distribution of species in NETmix static mixers
- 6 May 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 230, 649-666
Open AccessA stochastic surrogate mathematical framework to describe the distribution of species in NETmix static mixers
- Open Access
- 24 April 2026
- Published by University of Porto in U.Porto Journal of Engineering
- Vol. 12 (3) , 1-2
Editorial
Product Engineering is a fundamental component of modern engineering education. In the Chemical Engineering sector, professional roles have been evolving from traditional commodities production toward product development—particularly in countries such as Portugal, where industrial activity is better suited to customized or medium-scale production rather than mass manufacturing. Recognizing this trend, the Master’s in Chemical Engineering program at the Faculty of Engineering of the University of Porto (FEUP) introduced a Product Engineering course in 2009. In 2022, a Special Issue of the U.Porto Journal of Engineering showcased a selection of works developed within this course (Silva et al., 2022). The course follows a structured methodology for product development based on four key cornerstones: Identification of market needs Generation of technical solutions to address those needs (ideas) Screening and selection of the most promising ideas Implementation analysis, including time-to-market considerations, industrial process design, regulatory aspects, intellectual property rights, and economic feasibility (manufacturing) In the 2023/24 academic year, the Product Engineering course incorporated advanced process simulation tools, namely SuperPro Designer and Aspen (Silva et al., 2024). These additions enabled students to apply the technical knowledge acquired throughout the Chemical Engineering curriculum to achieve more accurate process designs and to estimate capital (CAPEX) and operational (OPEX) expenditures. This third Special Issue presents a collection of works that already integrate these new features, demonstrating the continuous evolution and enhancement of the Product Engineering course at FEUP.
- 24 April 2026
- Published by University of Porto in U.Porto Journal of Engineering
- Vol. 12 (3) , 1-2
Open AccessEditorial
Product Engineering is a fundamental component of modern engineering education. In the Chemical Engineering sector, professional roles have been evolving from traditional commodities production toward product development—particularly in countries such as Portugal, where industrial activity is better suited to customized or medium-scale production rather than mass manufacturing. Recognizing this trend, the Master’s in Chemical Engineering program at the Faculty of Engineering of the University of Porto (FEUP) introduced a Product Engineering course in 2009. In 2022, a Special Issue of the U.Porto Journal of Engineering showcased a selection of works developed within this course (Silva et al., 2022). The course follows a structured methodology for product development based on four key cornerstones: Identification of market needs Generation of technical solutions to address those needs (ideas) Screening and selection of the most promising ideas Implementation analysis, including time-to-market considerations, industrial process design, regulatory aspects, intellectual property rights, and economic feasibility (manufacturing) In the 2023/24 academic year, the Product Engineering course incorporated advanced process simulation tools, namely SuperPro Designer and Aspen (Silva et al., 2024). These additions enabled students to apply the technical knowledge acquired throughout the Chemical Engineering curriculum to achieve more accurate process designs and to estimate capital (CAPEX) and operational (OPEX) expenditures. This third Special Issue presents a collection of works that already integrate these new features, demonstrating the continuous evolution and enhancement of the Product Engineering course at FEUP.
- Open Access
- 8 April 2026
- Published by Elsevier in Chemical Engineering Science
- Vol. 331
Comparative techno-economic analysis of hydrate-based desalination using propane and CO2
- 8 April 2026
- Published by Elsevier in Chemical Engineering Science
- Vol. 331
Open AccessComparative techno-economic analysis of hydrate-based desalination using propane and CO2
- Open Access
- 7 February 2026
- Published by Elsevier in Chemical Engineering Science
- Vol. 326
Continuous oscillatory NETmix reactor: A new operating mode of an oscillatory static mixer for continuous operation
- 7 February 2026
- Published by Elsevier in Chemical Engineering Science
- Vol. 326
Open AccessContinuous oscillatory NETmix reactor: A new operating mode of an oscillatory static mixer for continuous operation
- Open Access
- 18 December 2025
- Published by MDPI AG in Mathematics
- Vol. 13 (24) , 4027
CFD Simulation of a High Shear Mixer for Industrial AdBlue® Production
The increasing global demand for cleaner transportation has intensified the importance of efficient AdBlue® (AUS32) production, a key chemical in selective catalytic reduction (SCR) systems that reduces nitrogen oxides (NOx) emissions from diesel engines. This work presents a computational fluid dynamics (CFD) simulation study of the urea–water mixing process within a high shear mixer (HSM), aiming to enhance the sustainability of AdBlue® manufacturing. The model evaluates the hydrodynamic characteristics critical to optimising the dissolution of urea pellets in deionised water, which conventionally requires significant preheating. Experimental validation was conducted by comparing pressure drop simulation results with operational data from an active industrial facility in the United Kingdom. Therefore, this study validates the CFD model against an industrial two-stage Rotor–stator under real operating conditions. The computational framework combines a refined mesh with the k-ω SST turbulent model to resolve flow structures and capture near-wall effects and shear stress transport in complex flow domains. The results reveal opportunities for process optimisation, particularly in reducing thermal energy input without compromising solubility, thus offering a more sustainable pathway for AdBlue® production. The main contribution of this work is to close existing gaps in industrial practice and propose and computationally validate strategies to improve the numerical design of HSM for solid dissolution.
- 18 December 2025
- Published by MDPI AG in Mathematics
- Vol. 13 (24) , 4027
Open AccessCFD Simulation of a High Shear Mixer for Industrial AdBlue® Production
The increasing global demand for cleaner transportation has intensified the importance of efficient AdBlue® (AUS32) production, a key chemical in selective catalytic reduction (SCR) systems that reduces nitrogen oxides (NOx) emissions from diesel engines. This work presents a computational fluid dynamics (CFD) simulation study of the urea–water mixing process within a high shear mixer (HSM), aiming to enhance the sustainability of AdBlue® manufacturing. The model evaluates the hydrodynamic characteristics critical to optimising the dissolution of urea pellets in deionised water, which conventionally requires significant preheating. Experimental validation was conducted by comparing pressure drop simulation results with operational data from an active industrial facility in the United Kingdom. Therefore, this study validates the CFD model against an industrial two-stage Rotor–stator under real operating conditions. The computational framework combines a refined mesh with the k-ω SST turbulent model to resolve flow structures and capture near-wall effects and shear stress transport in complex flow domains. The results reveal opportunities for process optimisation, particularly in reducing thermal energy input without compromising solubility, thus offering a more sustainable pathway for AdBlue® production. The main contribution of this work is to close existing gaps in industrial practice and propose and computationally validate strategies to improve the numerical design of HSM for solid dissolution.
- Open Access
- 5 October 2025
- Published by Elsevier in Chemical Engineering Science
- Vol. 321
Multi-membrane module for gas–liquid contact: Development of a methodology for side-stream ozone injection system applications
- 5 October 2025
- Published by Elsevier in Chemical Engineering Science
- Vol. 321
Open AccessMulti-membrane module for gas–liquid contact: Development of a methodology for side-stream ozone injection system applications
- Open Access
- 20 April 2025
- Published by Elsevier in Chemical Engineering Science
- Vol. 313
A new operating mode of NETmix for active mixing under batch operation
- 20 April 2025
- Published by Elsevier in Chemical Engineering Science
- Vol. 313
Open AccessA new operating mode of NETmix for active mixing under batch operation