BDBirol Dindoruk

Birol Dindoruk

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Birol Dindoruk has a total of 135 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimentally Constrained Kinetic Modeling of Long-Term Permeability and Injectivity Bounds in CO2–Brine–Sandstone Systems

    by Musa E. M. Ahmed, Birol Dindoruk

    Maintaining injectivity is essential for the success of CO2-enhanced oil recovery (CO2-EOR) and CO2 storage. This study develops a simple, experimentally based framework to evaluate how sandstone reservoir properties evolve over time during CO2 injection. Static aging experiments were conducted on Berea sandstone for exposure periods of up to three months using CO2-saturated brine at representative reservoir conditions (150 °F and 1500 psi). Changes in rock and fluid properties were quantified using X-ray diffraction (XRD), aqueous chemistry (ICP-OES), and dry mass-loss measurements to quantify reaction progress. Dissolution kinetics were derived from these data and combined with a mass-balance porosity model and the Kozeny–Carman porosity–permeability relationship to project time-dependent porosity and permeability evolution. Short-term experimental results show limited alteration of the quartz-dominated sandstone framework over the duration of the laboratory tests, while the measured permeability decreased by 5.7% and 11.7% after 1 and 3 months of CO2 exposure, respectively. However, kinetic projections indicate that slow dissolution of reactive carbonate cements can gradually enhance pore connectivity over longer timescales. Scenario-based projections over a 30-year injection period predict a potential permeability increase exceeding 140%, accompanied by a model-projected absolute porosity increase of approximately 5.5 percentage points; the permeability projection is contingent on the assumptions of the Kozeny–Carman relationship. The framework links laboratory geochemical measurements with long-term permeability assessment for CO2-EOR and CO2 storage.

  • Open Access

    Development of Waxy Crude Oil Storage Tank Emission Factors

    by Seth Lyman, Birol Dindoruk

    Volatile organic compound (VOC) emissions from crude oil storage tanks are commonly estimated using emission factors derived from laboratory analyses and equation of state (EOS) models, but the reproducibility and uncertainty of these methods have not been well characterized, particularly for the waxy crude oil produced in the Uinta Basin of Utah, U.S.A. We collected replicate pressurized liquid and gas samples from three Uinta Basin oil wells, distributed them among three commercial laboratories, and used a subset of the laboratory results as input for two EOS models (ProMax and PVTsim). Significant differences existed among laboratories for most measured parameters, even though each laboratory generally followed the same standard methods. Emission factors calculated from the flash liberation data of two laboratories were not significantly different from one another, but this agreement resulted from compensating differences rather than from consistent underlying measurements. EOS models added a substantial additional layer of variability; uncertainties for model-derived emission factors exceeded 100% in almost all cases. Laboratory flash liberation analysis provided lower-uncertainty emission factors than EOS model-based approaches for Uinta Basin waxy crude, though EOS models with binary interaction parameters tuned specifically for waxy crude oils may provide more reliable results.

  • Open Access

    Techno-Economic Investigation of CO2 Injection Schemes for Geological Carbon Storage in Saline Aquifers

    by Jose A. Benavides, Birol Dindoruk

    Deep saline aquifers are among the most promising formations for large-scale carbon capture and storage (CCS); however, reservoir pressure buildup, limited CO2 dissolution, plume migration, and salt precipitation can reduce storage efficiency and injectivity. This study evaluates the technical and economic performance of engineered CO2 injection strategies, including intermittent CO2 injection (ICI), water-alternating-CO2 (WA–CO2), carbonated water injection (CWI), and carbonated water-alternating-CO2 (CWA–CO2), under low- (180 mD) and high-permeability (1000 mD) saline aquifers and injection rates ranging from 0.01 to 0.5 MTPA. Laboratory-derived relative permeability and CO2 diffusivity data were incorporated into three-dimensional compositional reservoir simulations, while the most promising strategy was validated using the Sleipner benchmark model. Techno-economic performance was assessed through Monte Carlo uncertainty and sensitivity analyses. The results show that injection strategy, rate, and reservoir permeability strongly influence trapping efficiency and pressure evolution. ICI increased dissolution trapping by up to 20%, enhanced residual trapping by approximately 40%, and reduced average reservoir pressure by up to 10%, although its extended operating period reduced its economic attractiveness. Among the evaluated alternatives, WA–CO2 provided the best balance between technical and economic performance by enhancing dissolution trapping, improving pressure management and plume control, and maintaining storage costs within 3.6–3.7% of the continuous injection base case. Field-scale validation using the Sleipner model demonstrated improved long-term trapping efficiency and reduced mobile CO2 and plume extent. Monte Carlo analysis (20,000 realizations) confirmed the economic robustness of the evaluated strategies under the assumed policy framework, identifying Section 45Q tax credit and discount rate as the dominant economic drivers. These findings demonstrate that properly designed WA–CO2 schemes can significantly improve the technical and economic performance of geological CO2 storage.


  • Measurement and Analysis of CO2 Adsorption and Permeability in Shales in Application to Geological Carbon Storage

    by Shengyu Yao, Deniz M. Paker, Ram R. Ratnakar, Birol Dindoruk

    Summary: The rising carbon dioxide (CO2) emissions have intensified the urgency to develop effective strategies for decarbonization. One of the most promising solutions is carbon capture, usage, and storage (CCUS), especially underground storage in geological formations. This pathway allows the continued use of existing infrastructure/technologies while mitigating the impact of fossil fuel usage on global warming. Several options, such as the use of aquifers and depleted reservoirs, are possible; storing CO2 in depleted gas reservoirs, especially shale-gas reservoirs, offers a cost-effective and promising option for CCUS. Development of storage strategies requires a proper quantification of adsorption and transport characteristics of CO2 in these reservoirs, which are the main focus areas of this study. The proposed workflow incorporates both experimental and modeling approaches. The experimental component involves transient measurements of CO2 adsorption behavior in shale samples using a magnetic suspension balance (MSB). These measurements were conducted under reservoir conditions with temperatures ranging from 160°F (71°C) to 194°F (90°C) and pressures from 3,500 to 5,075 psi. The modeling approach uses the volume-averaging technique that Ratnakar and Dindoruk (2018, 2019) used to invert the transient data and evaluate CO2 permeability in the samples, while an accelerated experimental process was developed first without the existence of porous media (Ratnakar and Dindoruk 2015) and with further verification via experimentation by Ratnakar et al. (2019). More information and a general review of the role of diffusivity in oil and gas industries, including fundamentals, measurement, and correlative techniques, can be found in the study by Ratnakar and Dindoruk (2022). The results reveal that the pretreatment method plays a significant role in influencing adsorption behavior. In particular, shale samples subjected to high-temperature pretreatments, which were designed to remove residual volatile hydrocarbons, exhibited greater CO2 adsorption capacity. In addition, a notable finding was the plateau in adsorption observed at higher pressures, particularly as CO2 transitioned into its supercritical phase. This shift in adsorption dynamics highlights the changing interactions between CO2 and the shale matrix, which have critical implications for optimizing CO2 storage in deep geological formations. Furthermore, the CO2 permeability vs. pressure at a fixed temperature is aligned with the Klinkenberg effect at relatively lower pressures, as expected. The novelty of this work lies in the new data on CO2 adsorption and permeability in shale samples under reservoir conditions. Characterization of shales in this context has additional use cases even for sandstone reservoirs, as the shales will constitute the caprocks. These findings offer valuable insights for assessing and designing CO2 storage in subsurface environments, with significant implications for advancing CCUS implementation strategies.


  • Open Access

    Bulk CO2 Diffusivity in Brine and Porous Media: A Machine Learning Approach for Deep Saline Aquifer Conditions

    by Jose A. Benavides, Birol Dindoruk

    Deep saline aquifers are among the most promising formations for long-term geological CO2 storage due to their extensive distribution and large storage capacity. Accurate estimation of the CO2 diffusion coefficient in brine is essential for modeling dissolution trapping, one of the most long-term reliable CO2 sequestration mechanisms. However, laboratory measurements under reservoir conditions are costly and time-intensive, motivating the development of efficient predictive tools. This study develops machine learning (ML) frameworks for predicting bulk and porous media CO2 diffusivity by combining two data augmentation strategies—Conditional Tabular Generative Adversarial Networks (CTGAN) and pseudo-labeling (PL)—with four ML algorithms: Random Forest Regression (RFR), XGBoost Regression (XGBR), Natural Gradient Boosting (NGBoost), and Gene Expression Programming (GEP). The database consists of 186 bulk diffusivity and 47 porous media diffusivity observations compiled from experimental and molecular dynamics studies, covering pressures of 0.1–30 MPa, temperatures of 286–673 K, salinities up to 300,000 ppm, and permeabilities of 0.05–2500 Darcy. Data augmentation increased dataset density by approximately 40%, resulting in hybrid datasets of 260 and 68 samples for bulk and porous media diffusivity, respectively. Results show that PL consistently outperforms CTGAN augmentation by preserving physically meaningful relationships and improving predictive accuracy. NGBoost achieved the best performance, with RMSE values of 0.33 and 0.61 for bulk and porous media diffusivity, respectively. Feature-importance analysis identified temperature as the dominant control on diffusivity, followed by pressure and salinity, while permeability exhibited limited influence. The developed framework provides a computationally efficient alternative to extensive laboratory measurements and offers a reliable tool for reservoir simulation, CO2-EOR studies, and geological carbon storage design under data-limited conditions.


  • A Fast and Robust Convergent Algorithm for Rachford-Rice Equations and Its Extension to Negative Feed Compositions

    by Tianjia Huang, Russell T. Johns, Birol Dindoruk

    Summary: Okuno et al. (2010) developed an algorithm that solves the Rachford-Rice (RR) equations with guaranteed convergence for systems with arbitrary numbers of phases and components for positive and negative flash conditions, but with feed compositions always positive. We reduce the average number of iterations of that approach by narrowing the solution window significantly and by using a gradient-based estimate of the initial guess derived from vertex intersections. Numerical tests on one million random positive and negative flashes show a systematic average reduction in iterations. Near phase boundaries and critical points, the modified algorithm reduces the number of iterations by 2 or 3 compared to Okuno et al. and convergences quickly even for six phase positive flash calculations in fewer than four average iterations of 1 million randomly generated examples. The best results are obtained for three-phase three-component flash calculations, where the feasible area in saturation was reduced by an average of 27%. In addition, we extend the algorithm to handle flash calculations with negative feed compositions, which are important for the calculation of minimum miscibility pressure and other special applications. Multiple tie-line solutions are possible for such cases and increase as the dimension of the component number is increased. The nonconvex function for negative feed composition therefore requires special care for the initial guess, while the method converges for any number of components and phases.

  • Preparation of Selective-Plugging Microgel Particles for CO2 Conformance Control in Supercritical Conditions

    by Yining Wu, Yuze Sun, Haiqing Zhang, Shang Gao, Leiyang Dai, Bin Yuan, Birol Dindoruk, Mingwei Zhao

    Summary: Carbon dioxide (CO2) flooding is a promising technology for reducing carbon emissions and enhancing oil recovery in low-permeability reservoirs. However, the prominent viscosity difference between CO2 and crude oil leads to viscous fingering. Furthermore, superimposed with reservoir heterogeneity, the channeling of CO2 is further intensified, causing premature CO2 breakthrough. Then, severe gas channeling occurs, significantly limiting the sweep efficiency. The application of gel particles to control gas channeling faces significant challenges due to the strong extraction effect and acidic environment associated with CO2, which deteriorate the swelling capability and structural stability of conventional gel particles. Consequently, existing CO2-resistant gel particles often fail to control the channeling of CO2 effectively and sustainably in low-permeability reservoirs. In this study, gel particles with CO2 affinity and swelling capability in CO2 environments were developed to enhance the stability and enable selective plugging. A polymer incorporating polydimethylsiloxane (PDMS) segments was designed, and a CO2-affinitive gel particle system was constructed via emulsion polymerization. Analysis of particle-CO2 interactions showed that the CO2-affinitive gel particles exhibited an attractive interaction energy, the magnitude of which was 31.83% greater than that of polyacrylamide (PAM) gel particles. Microstructural and particle size analyses revealed that the particles possess comparatively uniform initial diameters with good dispersibility. Thermal stability testing indicated that the gel particles could withstand temperatures up to 363.5°C under CO2 atmosphere. Coreflooding tests showed that at 0.5 wt% concentration, the gel particles achieved a plugging rate exceeding 80% in the presence of CO2. Furthermore, once a nitrogen (N2) slug was injected after the CO2 slug, it led to a 44.50% reduction in plugging efficiency and partial restoration of the rock permeability, attributable to significant contraction of gel particles previously swollen by CO2. Overall, the CO2-affinitive gel particles offer an efficient solution for mitigating CO2 channeling, expanding the swept volume, and ultimately improving the recovery efficiency of low-permeability reservoirs under CO2 flooding.

  • Hydrogen, Methane, and Carbon Dioxide Sorption in Sultani, Longmaxi, and Eagle Ford Shales at Geological Storage Conditions

    by Hanin Samara, Mahmoodzia Zamanina, Timo Seemann, Thorsten Bauersachs, Ewelina Ksepko, Oliver Järvik, Thomas Ulrich, Birol Dindoruk

    Summary: Sorption in shales plays a critical role in determining gas storage capacity, recovery efficiency, and transport behavior. While several studies have examined the influence of pressure and shale properties on the sorption capacities of methane (CH4) and carbon dioxide (CO2), the investigation of hydrogen (H2) sorption capacity is limited to low pressures or conducted on samples originating from the same formation. In the current study, we present the first systematic investigation of H2, CH4, and CO2 sorption at elevated pressures on three geologically and geographically distinct shale samples. Moreover, to date, the effect of prior exposure to supercritical CO2 (sc-CO2) on the sorption capacity of H2 has not been investigated. Using the gravimetric method, sorption measurements were conducted at 313 K across a pressure range of 2.5–15 MPa. The findings highlight total organic carbon (TOC) content as the dominant factor governing gas sorption, followed by textural properties such as specific surface area (SSA) and specific pore volume. A strong positive correlation was observed between sorption capacity of the gases (mmol/g rock) and TOC content. When normalized to TOC content, the sorption capacity exhibited a positive correlation with the textural properties of the investigated samples. The highest sorption capacity measured among the three samples was independent of SSA and specific pore volume, suggesting that absorption into organic matter contributes to the overall sorption capacity in addition to physical adsorption. While CO2 consistently exhibited the highest sorption capacity across all samples, the order of CH4 and H2 sorption capacity varied. The sorption capacity of CH4 was found to be higher than H2 in only two of the three samples. In contrast, the third sample showed an inversion between H2 and CH4. Thus, our data, for the first time, demonstrate an inversion in sorption order between H2 and CH4, attributable to pore-structure-induced size exclusion effects. Selectivity evaluation highlights CO2 as the most promising cushion gas in H2 storage scenarios.