Matthias Batzill
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Matthias Batzill has a total of 174 co-authors. Here are the top co-authors by number of shared publications:
- Arkady Krasheninnikov
Helmholtz-Zentrum Dresden-Rossendorf
13 shared publications Sadhu Kolekar
Department of Physics, University of South Florida, Tampa, Florida 33647, United States
12 shared publicationsJingfeng Li
Department of Physics, University of South Florida, Tampa, Florida 33647, United States
10 shared publications- Mahdi Ghorbani-Asl
Helmholtz-Zentrum Dresden-Rossendorf
10 shared publications Horacio Coy Diaz
Department of Physics University of South Florida Tampa FL 33620 USA
8 shared publicationsKinga Lasek
Department of Physics, University of South Florida, Tampa, FL 33620, USA
8 shared publications
Latest Publications
- Open Access
- 7 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (15) , 12008-12022
Large-Scale Integration of Experimental and Computational Data for 2D Materials
The past decade has seen rapid growth in the number of experimentally realized two-dimensional (2D) materials with diverse chemical and physical properties. However, information on their crystal structure, synthesis routes, and measured or predicted properties remains scattered across thousands of publications. Here, we consolidate this fragmented knowledge by establishing X2DB─an open infrastructure that integrates experimental and computational data on 2D materials. Using extensive literature mining and direct community uploads, we identify 370 unique 2D materials that have been realized in monolayer or few-layer form and link them to their digital counterparts in computational databases, enabling consistent ab initio characterization of their properties across monolayer, bilayer, and bulk forms. We describe the structure and content of the database, highlight its support for community uploads, illustrate how it can be used to generate scientific insight, and introduce a hierarchical classification of the known set of 2D materials. Our work supports the integration and cross-fertilization of experimental and theoretical knowledge and contributes to data-driven and predictive synthesis of 2D materials.
- 7 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (15) , 12008-12022
Open AccessLarge-Scale Integration of Experimental and Computational Data for 2D Materials
The past decade has seen rapid growth in the number of experimentally realized two-dimensional (2D) materials with diverse chemical and physical properties. However, information on their crystal structure, synthesis routes, and measured or predicted properties remains scattered across thousands of publications. Here, we consolidate this fragmented knowledge by establishing X2DB─an open infrastructure that integrates experimental and computational data on 2D materials. Using extensive literature mining and direct community uploads, we identify 370 unique 2D materials that have been realized in monolayer or few-layer form and link them to their digital counterparts in computational databases, enabling consistent ab initio characterization of their properties across monolayer, bilayer, and bulk forms. We describe the structure and content of the database, highlight its support for community uploads, illustrate how it can be used to generate scientific insight, and introduce a hierarchical classification of the known set of 2D materials. Our work supports the integration and cross-fertilization of experimental and theoretical knowledge and contributes to data-driven and predictive synthesis of 2D materials.
- Open Access
- 31 March 2026
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 17 (1) , 454-488
Defects and defect-mediated engineering of two-dimensional materials: challenges and open questions
Compared to bulk solids, defects in low-dimensional materials and, specifically, 2D systems are expected to have a stronger effect, detrimental or beneficial, on their properties. Owing to their geometry, defects in 2D materials can easily be formed due to the interaction with the environment or under impacts of energetic particles, such as ions and electrons. At the same time, many concepts of defect production under irradiation in bulk systems are not applicable for 2D materials or require substantial modifications. Various aspects of the physics and chemistry of defects in 2D materials have been addressed, and the results of these investigations are presented in hundreds of research papers and review articles. However, the challenges and open questions that still remain in the field have received relatively little attention. These topics were recently addressed at the symposium “Defect-mediated engineering of nanomaterials for energy and quantum applications” organized by the Beilstein-Institut. Following the discussions at the symposium, here, we present the challenges and open questions in our understanding of the behavior of defective 2D materials, interaction of energetic particles with low-dimensional targets, and defect-mediated engineering of the properties of 2D systems. We further discuss possible solutions to these problems or suggest “work-arounds”, which should accelerate the progress in the field.
- 31 March 2026
- Published by Beilstein Institut in Beilstein Journal of Nanotechnology
- Vol. 17 (1) , 454-488
Open AccessDefects and defect-mediated engineering of two-dimensional materials: challenges and open questions
Compared to bulk solids, defects in low-dimensional materials and, specifically, 2D systems are expected to have a stronger effect, detrimental or beneficial, on their properties. Owing to their geometry, defects in 2D materials can easily be formed due to the interaction with the environment or under impacts of energetic particles, such as ions and electrons. At the same time, many concepts of defect production under irradiation in bulk systems are not applicable for 2D materials or require substantial modifications. Various aspects of the physics and chemistry of defects in 2D materials have been addressed, and the results of these investigations are presented in hundreds of research papers and review articles. However, the challenges and open questions that still remain in the field have received relatively little attention. These topics were recently addressed at the symposium “Defect-mediated engineering of nanomaterials for energy and quantum applications” organized by the Beilstein-Institut. Following the discussions at the symposium, here, we present the challenges and open questions in our understanding of the behavior of defective 2D materials, interaction of energetic particles with low-dimensional targets, and defect-mediated engineering of the properties of 2D systems. We further discuss possible solutions to these problems or suggest “work-arounds”, which should accelerate the progress in the field.
- Open Access
- 5 January 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale Horizons
- Vol. 11 (1) , 264-273
Synthesis of 2D-NiPtTe 2 by topotactical surface reaction of PtTe 2 with Ni
Synthesis of novel van der Waals materials are demonstrated by a topotactical reaction. Specifically, 2D-NiPtTe 2 is synthesized by converting monolayer PtTe 2 by reaction with vapor deposited Ni.
- 5 January 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale Horizons
- Vol. 11 (1) , 264-273
Open AccessSynthesis of 2D-NiPtTe 2 by topotactical surface reaction of PtTe 2 with Ni
Synthesis of novel van der Waals materials are demonstrated by a topotactical reaction. Specifically, 2D-NiPtTe 2 is synthesized by converting monolayer PtTe 2 by reaction with vapor deposited Ni.
- 24 December 2025
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 26 (1) , 627-634
Introducing Excess Ni into the Van der Waals Gap of NiTe 2 by Topotactic Reaction
- 24 December 2025
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 26 (1) , 627-634
Introducing Excess Ni into the Van der Waals Gap of NiTe 2 by Topotactic Reaction
- 23 December 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (1) , 376-383
When Defects Become the Crystal: Periodic Mirror-Twin Boundary Phases in Substoichiometric 2D-MoTe 2
Defect concentrations in crystalline matter can be tuned by growth and postsynthesis processing conditions. Point defects may condense into extended defects, and their ordering into periodic arrays creates novel materials. We show that Mo-rich mirror-twin grain boundary (MTB) loops in MoTe2 arrange into periodic phases under conditions that balance Te-chemical potential and thermal activation. These MTB phases give rise to a homologous series with various stoichiometries. While there are many possible arrangements of MTBs, our ab initio calculations show that the observed phases all lie on or very close to the convex hull. These thermodynamic equilibrium considerations provide a unified theory for the stability of the five MTB phases reported here. Density functional theory simulations indicate that these MTB phases exhibit Kagome-like flat bands with potential for exhibiting many-body phenomena and thus suggesting an approach for defect-engineering quantum properties in systems with reduced dimensionality.
- 23 December 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (1) , 376-383
When Defects Become the Crystal: Periodic Mirror-Twin Boundary Phases in Substoichiometric 2D-MoTe 2
Defect concentrations in crystalline matter can be tuned by growth and postsynthesis processing conditions. Point defects may condense into extended defects, and their ordering into periodic arrays creates novel materials. We show that Mo-rich mirror-twin grain boundary (MTB) loops in MoTe2 arrange into periodic phases under conditions that balance Te-chemical potential and thermal activation. These MTB phases give rise to a homologous series with various stoichiometries. While there are many possible arrangements of MTBs, our ab initio calculations show that the observed phases all lie on or very close to the convex hull. These thermodynamic equilibrium considerations provide a unified theory for the stability of the five MTB phases reported here. Density functional theory simulations indicate that these MTB phases exhibit Kagome-like flat bands with potential for exhibiting many-body phenomena and thus suggesting an approach for defect-engineering quantum properties in systems with reduced dimensionality.
- 7 November 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (46) , 20833-20839
Topotactic Reaction of Mn with InSe To Form MnIn 2 Se 4
- 7 November 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (46) , 20833-20839
Topotactic Reaction of Mn with InSe To Form MnIn 2 Se 4
- 18 September 2025
- Published by Elsevier in Physica E: Low-dimensional Systems and Nanostructures
- Vol. 175
Unraveling Mn intercalation and diffusion in NbSe 2 bilayers through DFTB simulations
- 18 September 2025
- Published by Elsevier in Physica E: Low-dimensional Systems and Nanostructures
- Vol. 175
Unraveling Mn intercalation and diffusion in NbSe 2 bilayers through DFTB simulations
Alloying of Mn with Bi‐Rich Surfaces of Bi2Te3 by Topotactic Reaction
Interfacing topological insulators (TI) with magnetic materials enables accessing quantum effects for advanced devices. The synthesis of such heterostructures faces challenges due to interlaying mixing and the often‐complex multicomponent materials required to combine the desired properties. An alternative synthesis to direct growth is the modification of 2D materials by topotactic reactions to introduce new functionalities into pre‐formed single or few‐component 2D sheets. Here, the self‐formation of bismuthene (a bilayer of Bi; Bi2) is utilized by thermal decomposition of Bi2Te3 as a platform to create novel 2D overlayers on the TI‐ substrate. Specifically, the Bi2 layer is modified by reacting it with vapor deposited Mn in an attempt to induce magnetic properties. Scanning tunneling microscopy indicates that the Mn modified surface remains in a planar 2D layer, indicating the formation of an ordered Mn‐rich surface layer. Density functional theory (DFT) is used to develop models of both the Bi‐rich Bi2Te3 surface as well as their subsequent Mn‐modified structure. The DFT models indicate the possibility of magnetic ordering of the high spin Mn2+ ions. The successful synthesis of planar MnBi alloys on a van der Waals material illustrates topotactic reactions as an alternative for creating novel layered heterostructures.
Alloying of Mn with Bi‐Rich Surfaces of Bi2Te3 by Topotactic Reaction
Interfacing topological insulators (TI) with magnetic materials enables accessing quantum effects for advanced devices. The synthesis of such heterostructures faces challenges due to interlaying mixing and the often‐complex multicomponent materials required to combine the desired properties. An alternative synthesis to direct growth is the modification of 2D materials by topotactic reactions to introduce new functionalities into pre‐formed single or few‐component 2D sheets. Here, the self‐formation of bismuthene (a bilayer of Bi; Bi2) is utilized by thermal decomposition of Bi2Te3 as a platform to create novel 2D overlayers on the TI‐ substrate. Specifically, the Bi2 layer is modified by reacting it with vapor deposited Mn in an attempt to induce magnetic properties. Scanning tunneling microscopy indicates that the Mn modified surface remains in a planar 2D layer, indicating the formation of an ordered Mn‐rich surface layer. Density functional theory (DFT) is used to develop models of both the Bi‐rich Bi2Te3 surface as well as their subsequent Mn‐modified structure. The DFT models indicate the possibility of magnetic ordering of the high spin Mn2+ ions. The successful synthesis of planar MnBi alloys on a van der Waals material illustrates topotactic reactions as an alternative for creating novel layered heterostructures.
- 10 January 2025
- Published by Elsevier in Surface Science
- Vol. 754
Intercalation of Mn in a few layers of NbSe2 by molecular beam epitaxy
- 10 January 2025
- Published by Elsevier in Surface Science
- Vol. 754
Intercalation of Mn in a few layers of NbSe2 by molecular beam epitaxy
- 12 March 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (28)
Solid State Reaction Epitaxy, A New Approach for Synthesizing Van der Waals heterolayers: The Case of Mn and Cr on Bi2Se3
Van der Waals (vdW) heterostructures that pair materials with diverse properties enable various quantum phenomena. However, the direct growth of vdW heterostructures is challenging. Modification of the surface layer of quantum materials to introduce new properties is an alternative process akin to solid state reaction. Here, vapor deposited transition metals (TMs), Cr and Mn, are reacted with Bi2Se3 with the goal to transform the surface layer to XBi2Se4 (X = Cr, Mn). Experiments and ab initio MD simulations demonstrate that the TMs have a high selenium affinity driving Se diffusion toward the TM. For monolayer Cr, the surface Bi2Se3 is reduced to Bi2‐layer and a stable (pseudo) 2D Cr1+δSe2 layer is formed. In contrast, monolayer Mn can transform upon mild annealing into MnBi2Se4. This phase only forms for a precise amount of initial Mn deposition. Sub‐monolayer amounts dissolve into the bulk, and multilayers form stable MnSe adlayers. This study highlights the delicate energy balance between adlayers and desired surface modified layers that governs the interface reactions and that the formation of stable adlayers can prevent the reaction with the substrate. The success of obtaining MnBi2Se4 points toward an approach for the engineering of other multicomponent vdW materials by surface reactions.
- 12 March 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (28)
Solid State Reaction Epitaxy, A New Approach for Synthesizing Van der Waals heterolayers: The Case of Mn and Cr on Bi2Se3
Van der Waals (vdW) heterostructures that pair materials with diverse properties enable various quantum phenomena. However, the direct growth of vdW heterostructures is challenging. Modification of the surface layer of quantum materials to introduce new properties is an alternative process akin to solid state reaction. Here, vapor deposited transition metals (TMs), Cr and Mn, are reacted with Bi2Se3 with the goal to transform the surface layer to XBi2Se4 (X = Cr, Mn). Experiments and ab initio MD simulations demonstrate that the TMs have a high selenium affinity driving Se diffusion toward the TM. For monolayer Cr, the surface Bi2Se3 is reduced to Bi2‐layer and a stable (pseudo) 2D Cr1+δSe2 layer is formed. In contrast, monolayer Mn can transform upon mild annealing into MnBi2Se4. This phase only forms for a precise amount of initial Mn deposition. Sub‐monolayer amounts dissolve into the bulk, and multilayers form stable MnSe adlayers. This study highlights the delicate energy balance between adlayers and desired surface modified layers that governs the interface reactions and that the formation of stable adlayers can prevent the reaction with the substrate. The success of obtaining MnBi2Se4 points toward an approach for the engineering of other multicomponent vdW materials by surface reactions.