Di Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Di Wang has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
- Alexander V. Kildishev
Purdue University West Lafayette
8 shared publications - Alexandra Boltasseva
Elmore Family School of Electrical and Computer Engineering, Purdue University, West Lafayette, USA
8 shared publications Vladimir M. Shalaev
School of Electrical and Computer Engineering and Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907, United States
6 shared publications- Ting-Fung Chung
Department of Physics and Astronomy, Purdue University, West Lafayette, IN 47907, USA
4 shared publications - Vladimir M. Shalaev
Elmore Family School of Electrical and Computer Engineering, Purdue University, West Lafayette, USA
4 shared publications Dim-Lee Kwong
Institute of Microelectronics, A*STAR, Singapore 117865
3 shared publications
Latest Publications
- Open Access
- 20 July 2020
- Published by Springer Nature in Light: Science & Applications
- Vol. 9 (1) , 1-10
Enhancing the graphene photocurrent using surface plasmons and a p-n junction
The recently proposed concept of graphene photodetectors offers remarkable properties such as unprecedented compactness, ultrabroadband detection, and an ultrafast response speed. However, owing to the low optical absorption of pristine monolayer graphene, the intrinsically low responsivity of graphene photodetectors significantly hinders the development of practical devices. To address this issue, numerous efforts have thus far been made to enhance the light–graphene interaction using plasmonic structures. These approaches, however, can be significantly advanced by leveraging the other critical aspect of graphene photoresponsivity enhancement—electrical junction control. It has been reported that the dominant photocarrier generation mechanism in graphene is the photothermoelectric (PTE) effect. Thus, the two energy conversion mechanisms involved in the graphene photodetection process are light-to-heat and heat-to-electricity conversions. In this work, we propose a meticulously designed device architecture to simultaneously enhance the two conversion efficiencies. Specifically, a gap plasmon structure is used to absorb a major portion of the incident light to induce localized heating, and a pair of split gates is used to produce a p-n junction in graphene to augment the PTE current generation. The gap plasmon structure and the split gates are designed to share common key components so that the proposed device architecture concurrently realizes both optical and electrical enhancements. We experimentally demonstrate the dominance of the PTE effect in graphene photocurrent generation and observe a 25-fold increase in the generated photocurrent compared to the un-enhanced cases. While further photocurrent enhancement can be achieved by applying a DC bias, the proposed device concept shows vast potential for practical applications.
- 20 July 2020
- Published by Springer Nature in Light: Science & Applications
- Vol. 9 (1) , 1-10
Open AccessEnhancing the graphene photocurrent using surface plasmons and a p-n junction
The recently proposed concept of graphene photodetectors offers remarkable properties such as unprecedented compactness, ultrabroadband detection, and an ultrafast response speed. However, owing to the low optical absorption of pristine monolayer graphene, the intrinsically low responsivity of graphene photodetectors significantly hinders the development of practical devices. To address this issue, numerous efforts have thus far been made to enhance the light–graphene interaction using plasmonic structures. These approaches, however, can be significantly advanced by leveraging the other critical aspect of graphene photoresponsivity enhancement—electrical junction control. It has been reported that the dominant photocarrier generation mechanism in graphene is the photothermoelectric (PTE) effect. Thus, the two energy conversion mechanisms involved in the graphene photodetection process are light-to-heat and heat-to-electricity conversions. In this work, we propose a meticulously designed device architecture to simultaneously enhance the two conversion efficiencies. Specifically, a gap plasmon structure is used to absorb a major portion of the incident light to induce localized heating, and a pair of split gates is used to produce a p-n junction in graphene to augment the PTE current generation. The gap plasmon structure and the split gates are designed to share common key components so that the proposed device architecture concurrently realizes both optical and electrical enhancements. We experimentally demonstrate the dominance of the PTE effect in graphene photocurrent generation and observe a 25-fold increase in the generated photocurrent compared to the un-enhanced cases. While further photocurrent enhancement can be achieved by applying a DC bias, the proposed device concept shows vast potential for practical applications.
- 22 April 2020
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 20 (5) , 3663-3672
Solar Thermoplasmonic Nanofurnace for High-Temperature Heterogeneous Catalysis
Most of existing solar thermal technologies require highly concentrated solar power to operate in the temperature range 300–600 °C. Here, thin films of refractory plasmonic TiN cylindrical nanocavities manufactured via flexible and scalable process are presented. The fabricated TiN films show polarization-insensitive 95% broadband absorption in the visible and near-infrared spectral ranges and act as plasmonic “nanofurnaces” capable of reaching temperatures above 600 °C under moderately concentrated solar irradiation (∼20 Suns). The demonstrated structures can be used to control nanometer-scale chemistry with zeptoliter (10–21 L) volumetric precision, catalyzing C—C bond formation and melting inorganic deposits. Also shown is the possibility to perform solar thermal CO oxidation at rates of 16 mol h–1 m–2 and with a solar-to-heat thermoplasmonic efficiency of 63%. Access to scalable, cost-effective refractory plasmonic nanofurnaces opens the way to the development of modular solar thermal devices for sustainable catalytic processes.
- 22 April 2020
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 20 (5) , 3663-3672
Solar Thermoplasmonic Nanofurnace for High-Temperature Heterogeneous Catalysis
Most of existing solar thermal technologies require highly concentrated solar power to operate in the temperature range 300–600 °C. Here, thin films of refractory plasmonic TiN cylindrical nanocavities manufactured via flexible and scalable process are presented. The fabricated TiN films show polarization-insensitive 95% broadband absorption in the visible and near-infrared spectral ranges and act as plasmonic “nanofurnaces” capable of reaching temperatures above 600 °C under moderately concentrated solar irradiation (∼20 Suns). The demonstrated structures can be used to control nanometer-scale chemistry with zeptoliter (10–21 L) volumetric precision, catalyzing C—C bond formation and melting inorganic deposits. Also shown is the possibility to perform solar thermal CO oxidation at rates of 16 mol h–1 m–2 and with a solar-to-heat thermoplasmonic efficiency of 63%. Access to scalable, cost-effective refractory plasmonic nanofurnaces opens the way to the development of modular solar thermal devices for sustainable catalytic processes.
- Open Access
A chip-scale oscillation-mode optomechanical inertial sensor near the thermodynamical limits
High-precision inertial sensing and gravity sensing are key in navigation, oil exploration, and earthquake prediction. In contrast to prior accelerometers using piezoelectric or electronic capacitance readout techniques, optical readout provides narrow-linewidth high-sensitivity laser detection along with low-noise resonant optomechanical transduction near the thermodynamical limits. Here an optomechanical inertial sensor with 8.2micro-g/Hz^1/2 velocity random walk (VRW) at acquisition rate of 100 Hz and 50.9 micro-g bias instability is demonstrated, suitable for consumer and industrial grade applications, e.g., inertial navigation, inclination sensing, platform stabilization, and/or wearable device motion detection. Driven into optomechanical sustained-oscillation, the slot photonic crystal cavity provides radio-frequency readout of the optically-driven transduction with enhanced 625 microg/Hz sensitivity. Measuring the optomechanically-stiffened oscillation shift, instead of the optical transmission shift, provides a 220x VRW enhancement over pre-oscillation mode detection due to the strong optomechanical transduction. Supported by theory, this inertial sensor operates 2.56x above the thermodynamical limit at small integration times, with 43-dB dynamic range, in a solid-state room-temperature readout architecture.
Open AccessA chip-scale oscillation-mode optomechanical inertial sensor near the thermodynamical limits
High-precision inertial sensing and gravity sensing are key in navigation, oil exploration, and earthquake prediction. In contrast to prior accelerometers using piezoelectric or electronic capacitance readout techniques, optical readout provides narrow-linewidth high-sensitivity laser detection along with low-noise resonant optomechanical transduction near the thermodynamical limits. Here an optomechanical inertial sensor with 8.2micro-g/Hz^1/2 velocity random walk (VRW) at acquisition rate of 100 Hz and 50.9 micro-g bias instability is demonstrated, suitable for consumer and industrial grade applications, e.g., inertial navigation, inclination sensing, platform stabilization, and/or wearable device motion detection. Driven into optomechanical sustained-oscillation, the slot photonic crystal cavity provides radio-frequency readout of the optically-driven transduction with enhanced 625 microg/Hz sensitivity. Measuring the optomechanically-stiffened oscillation shift, instead of the optical transmission shift, provides a 220x VRW enhancement over pre-oscillation mode detection due to the strong optomechanical transduction. Supported by theory, this inertial sensor operates 2.56x above the thermodynamical limit at small integration times, with 43-dB dynamic range, in a solid-state room-temperature readout architecture.
- Open Access
- 25 October 2019
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 6 (4) , 041308
Colors with plasmonic nanostructures: A full-spectrum review
Since ancient times, plasmonic structural coloring has inspired humanity; glassmakers achieved vibrant colors by doping glass with metal nanoparticles to craft beautiful objects such as the Roman Lycurgus cup and stained glass. These lovely color filtering effects are a consequence of the resonant coupling of light and free electrons in metal nanoparticles, known as surface plasmons. Thanks to the continuing improvement of nanofabrication technology, the dimensions of nanoparticles and structures can now be precisely engineered to form “optical nanoantennas,” allowing for control of optical response at an unprecedented level. Recently, the field of plasmonic structural coloring has seen extensive growth. In this review, we provide an up-to-date overview of various plasmonic color filtering approaches and highlight their uses in a broad palette of applications. Various surface plasmon resonance modes employed in the plasmonic color filtering effect are discussed. We first review the development of the pioneering static plasmonic colors achieved with invariant optical nanoantennas and ambient environment, then we address a variety of emerging approaches that enable dynamic color tuning, erasing, and restoring. These dynamic color filters are capable of actively changing the filtered colors and carrying more color information states than the static systems. Thus, they open an avenue to high-density data storage, information encryption, and plasmonic information processing. Finally, we discuss the challenges and future perspectives in this exciting research area.
- 25 October 2019
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 6 (4) , 041308
Open AccessColors with plasmonic nanostructures: A full-spectrum review
Since ancient times, plasmonic structural coloring has inspired humanity; glassmakers achieved vibrant colors by doping glass with metal nanoparticles to craft beautiful objects such as the Roman Lycurgus cup and stained glass. These lovely color filtering effects are a consequence of the resonant coupling of light and free electrons in metal nanoparticles, known as surface plasmons. Thanks to the continuing improvement of nanofabrication technology, the dimensions of nanoparticles and structures can now be precisely engineered to form “optical nanoantennas,” allowing for control of optical response at an unprecedented level. Recently, the field of plasmonic structural coloring has seen extensive growth. In this review, we provide an up-to-date overview of various plasmonic color filtering approaches and highlight their uses in a broad palette of applications. Various surface plasmon resonance modes employed in the plasmonic color filtering effect are discussed. We first review the development of the pioneering static plasmonic colors achieved with invariant optical nanoantennas and ambient environment, then we address a variety of emerging approaches that enable dynamic color tuning, erasing, and restoring. These dynamic color filters are capable of actively changing the filtered colors and carrying more color information states than the static systems. Thus, they open an avenue to high-density data storage, information encryption, and plasmonic information processing. Finally, we discuss the challenges and future perspectives in this exciting research area.
- 14 May 2019
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 11 (23) , 11167-11172
Modulating phase by metasurfaces with gated ultra-thin TiN films
Deep control over the phase of light is critical to information processing, telecommunication, and spectroscopic imaging. We design an electrically tunable gold strip/TiN film hybrid metasurface with a deep phase modulation of 337°, employing the tunability of carrier density in a 1-nm titanium nitride film.
- 14 May 2019
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 11 (23) , 11167-11172
Modulating phase by metasurfaces with gated ultra-thin TiN films
Deep control over the phase of light is critical to information processing, telecommunication, and spectroscopic imaging. We design an electrically tunable gold strip/TiN film hybrid metasurface with a deep phase modulation of 337°, employing the tunability of carrier density in a 1-nm titanium nitride film.
- 8 May 2019
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 19 (6) , 3796-3803
Spatial and Temporal Nanoscale Plasmonic Heating Quantified by Thermoreflectance
The field of thermoplasmonics has thrived in the past decades since it uniquely provides remotely-controllable nanometer-scale heat sources that have augmented numerous technologies. Despite the extensive studies on steady-state plasmonic heating, the dynamic behavior of the plasmonic heaters in the nanosecond regime has remained largely unexplored, yet such timescale is indeed essential for a broad range of applications such as photocatalysis, optical modulators and detectors. Here, we use two distinct techniques based on the temperature-dependent surface reflectivity of materials – optical thermoreflectance imaging (OTI) and time-domain thermoreflectance (TDTR) – to comprehensively investigate plasmonic heating in both spatial and temporal domains. Specifically, OTI enables rapid visualization of plasmonic heating with sub-micron resolution, outperforming a standard thermal camera, and allows us to establish the connection between the optical absorptance and heating efficiency, as well as to analyse plasmonic heating dynamics on the millisecond scale. Using the TDTR technique, we, for the first time, study the optical resonance-dependent heat transfer dynamics of a nanometer-scale plasmonic structure in the nanosecond regime, and use a detailed computational model to extract the impulse response and thermal interface conductance of a multilayer plasmonic structure. The study reveals a quantitative relationship between the dimensions of the nanopatterned structure and its spatiotemporal thermal response to the light pulse excitation – a thermoplasmonic effect resulting from the spatial distribution of the absorbed electromagnetic energy. We also conclude that the two thermoreflectance techniques provide necessary feedback to nanoscale thermoplasmonic heat management where optimization in either heating power or temperature decay speed is needed.
- 8 May 2019
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 19 (6) , 3796-3803
Spatial and Temporal Nanoscale Plasmonic Heating Quantified by Thermoreflectance
The field of thermoplasmonics has thrived in the past decades since it uniquely provides remotely-controllable nanometer-scale heat sources that have augmented numerous technologies. Despite the extensive studies on steady-state plasmonic heating, the dynamic behavior of the plasmonic heaters in the nanosecond regime has remained largely unexplored, yet such timescale is indeed essential for a broad range of applications such as photocatalysis, optical modulators and detectors. Here, we use two distinct techniques based on the temperature-dependent surface reflectivity of materials – optical thermoreflectance imaging (OTI) and time-domain thermoreflectance (TDTR) – to comprehensively investigate plasmonic heating in both spatial and temporal domains. Specifically, OTI enables rapid visualization of plasmonic heating with sub-micron resolution, outperforming a standard thermal camera, and allows us to establish the connection between the optical absorptance and heating efficiency, as well as to analyse plasmonic heating dynamics on the millisecond scale. Using the TDTR technique, we, for the first time, study the optical resonance-dependent heat transfer dynamics of a nanometer-scale plasmonic structure in the nanosecond regime, and use a detailed computational model to extract the impulse response and thermal interface conductance of a multilayer plasmonic structure. The study reveals a quantitative relationship between the dimensions of the nanopatterned structure and its spatiotemporal thermal response to the light pulse excitation – a thermoplasmonic effect resulting from the spatial distribution of the absorbed electromagnetic energy. We also conclude that the two thermoreflectance techniques provide necessary feedback to nanoscale thermoplasmonic heat management where optimization in either heating power or temperature decay speed is needed.
- 26 October 2018
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 362 (6413) , 439-442
Synchrotron radiation from an accelerating light pulse
Shrinking synchrotron generation: The generation of synchrotron radiation is typically achieved by accelerating charges in large magnetic fields. Synchrotron facilities are usually the realm of large international organizations. Henstridge et al. show that the interaction of a femtosecond light pulse moving in an arc on a specially designed metasurface can also generate synchrotron radiation. In this case, the synchrotron radiation at terahertz frequencies was produced by the nonlinear polarization induced by the light pulse. The results hold promise for the development of powerful on-chip light sources. Science , this issue p. 439
- 26 October 2018
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 362 (6413) , 439-442
Synchrotron radiation from an accelerating light pulse
Shrinking synchrotron generation: The generation of synchrotron radiation is typically achieved by accelerating charges in large magnetic fields. Synchrotron facilities are usually the realm of large international organizations. Henstridge et al. show that the interaction of a femtosecond light pulse moving in an arc on a specially designed metasurface can also generate synchrotron radiation. In this case, the synchrotron radiation at terahertz frequencies was produced by the nonlinear polarization induced by the light pulse. The results hold promise for the development of powerful on-chip light sources. Science , this issue p. 439
- 22 May 2018
- Published by Optica Publishing Group in Optica
- Vol. 5 (6) , 678-681
Accelerating light with metasurfaces
It has been recently shown that specially engineered light beams have the remarkable ability to propagate along curved trajectories in vacuum. Current methods for generating accelerating beams use phase modulators and lenses, leading to length scales on the order of tens of centimeters or larger. This poses constraints and severely limits their applicability inside materials. Here, we accelerate light inside glass using a metasurface consisting of plasmonic nanoantennas. Highly bending beams with radii of curvature on the order of a hundred micrometers were generated, and the imaged intensities agree well with theory. Our approach for generating accelerating beams allows for their integration into on-chip photonic systems.
- 22 May 2018
- Published by Optica Publishing Group in Optica
- Vol. 5 (6) , 678-681
Accelerating light with metasurfaces
It has been recently shown that specially engineered light beams have the remarkable ability to propagate along curved trajectories in vacuum. Current methods for generating accelerating beams use phase modulators and lenses, leading to length scales on the order of tens of centimeters or larger. This poses constraints and severely limits their applicability inside materials. Here, we accelerate light inside glass using a metasurface consisting of plasmonic nanoantennas. Highly bending beams with radii of curvature on the order of a hundred micrometers were generated, and the imaged intensities agree well with theory. Our approach for generating accelerating beams allows for their integration into on-chip photonic systems.
- Open Access
- 18 May 2018
- Published by Wiley in Nanophotonics
- Vol. 7 (6) , 959-987
Material platforms for optical metasurfaces
Optical metasurfaces are judicously engineered electromagnetic interfaces that can control and manipulate many of light’s quintessential properties, such as amplitude, phase, and polarization. These artificial surfaces are composed of subwavelength arrays of optical antennas that experience resonant light‐matter interaction with incoming electromagnetic radiation. Their ability to arbitrarily engineer optical interactions has generated considerable excitement and interest in recent years and is a promising methodology for miniaturizing optical components for applications in optical communication systems, imaging, sensing, and optical manipulation. However, development of optical metasurfaces requires progress and solutions to inherent challenges, namely large losses often associated with the resonant structures; large‐scale, complementary metal‐oxide‐semiconductor‐compatible nanofabrication techniques; and incorporation of active control elements. Furthermore, practical metasurface devices require robust operation in high‐temperature environments, caustic chemicals, and intense electromagnetic fields. Although these challenges are substantial, optical metasurfaces remain in their infancy, and novel material platforms that offer resilient, low‐loss, and tunable metasurface designs are driving new and promising routes for overcoming these hurdles. In this review, we discuss the different material platforms in the literature for various applications of metasurfaces, including refractory plasmonic materials, epitaxial noble metal, silicon, graphene, phase change materials, and metal oxides. We identify the key advantages of each material platform and review the breakthrough devices that were made possible with each material. Finally, we provide an outlook for emerging metasurface devices and the new material platforms that are enabling such devices.
- 18 May 2018
- Published by Wiley in Nanophotonics
- Vol. 7 (6) , 959-987
Open AccessMaterial platforms for optical metasurfaces
Optical metasurfaces are judicously engineered electromagnetic interfaces that can control and manipulate many of light’s quintessential properties, such as amplitude, phase, and polarization. These artificial surfaces are composed of subwavelength arrays of optical antennas that experience resonant light‐matter interaction with incoming electromagnetic radiation. Their ability to arbitrarily engineer optical interactions has generated considerable excitement and interest in recent years and is a promising methodology for miniaturizing optical components for applications in optical communication systems, imaging, sensing, and optical manipulation. However, development of optical metasurfaces requires progress and solutions to inherent challenges, namely large losses often associated with the resonant structures; large‐scale, complementary metal‐oxide‐semiconductor‐compatible nanofabrication techniques; and incorporation of active control elements. Furthermore, practical metasurface devices require robust operation in high‐temperature environments, caustic chemicals, and intense electromagnetic fields. Although these challenges are substantial, optical metasurfaces remain in their infancy, and novel material platforms that offer resilient, low‐loss, and tunable metasurface designs are driving new and promising routes for overcoming these hurdles. In this review, we discuss the different material platforms in the literature for various applications of metasurfaces, including refractory plasmonic materials, epitaxial noble metal, silicon, graphene, phase change materials, and metal oxides. We identify the key advantages of each material platform and review the breakthrough devices that were made possible with each material. Finally, we provide an outlook for emerging metasurface devices and the new material platforms that are enabling such devices.
- Open Access
- 21 December 2016
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 17 (1) , 57-62
Enhanced Graphene Photodetector with Fractal Metasurface
Graphene has been demonstrated to be a promising photodetection material because of its ultrabroadband optical absorption, compatibility with CMOS technology, and dynamic tunability in optical and electrical properties. However, being a single atomic layer thick, graphene has intrinsically small optical absorption, which hinders its incorporation with modern photodetecting systems. In this work, we propose a gold snowflake-like fractal metasurface design to realize broadband and polarization-insensitive plasmonic enhancement in graphene photodetector. We experimentally obtain an enhanced photovoltage from the fractal metasurface that is an order of magnitude greater than that generated at a plain gold–graphene edge and such an enhancement in the photovoltage sustains over the entire visible spectrum. We also observed a relatively constant photoresponse with respect to polarization angles of incident light, as a result of the combination of two orthogonally oriented concentric hexagonal fractal geometries in one metasurface.
- 21 December 2016
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 17 (1) , 57-62
Open AccessEnhanced Graphene Photodetector with Fractal Metasurface
Graphene has been demonstrated to be a promising photodetection material because of its ultrabroadband optical absorption, compatibility with CMOS technology, and dynamic tunability in optical and electrical properties. However, being a single atomic layer thick, graphene has intrinsically small optical absorption, which hinders its incorporation with modern photodetecting systems. In this work, we propose a gold snowflake-like fractal metasurface design to realize broadband and polarization-insensitive plasmonic enhancement in graphene photodetector. We experimentally obtain an enhanced photovoltage from the fractal metasurface that is an order of magnitude greater than that generated at a plain gold–graphene edge and such an enhancement in the photovoltage sustains over the entire visible spectrum. We also observed a relatively constant photoresponse with respect to polarization angles of incident light, as a result of the combination of two orthogonally oriented concentric hexagonal fractal geometries in one metasurface.