Sherman Jun Rong Tan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sherman Jun Rong Tan has a total of 101 co-authors. Here are the top co-authors by number of shared publications:
- Kian Ping Loh
Department of Chemistry, National University of Singapore, Singapore, Singapore
13 shared publications - Ibrahim Abdelwahab
Department of Chemistry, National University of Singapore, Singapore 117543, Singapore
5 shared publications - Xiaoxu Zhao
School of Materials Science and Engineering, Peking University, Beijing 100871, China
5 shared publications - Yang Bao
State Key Laboratory of Luminescence Science and Technology, Changchun Institute of Optics Fine Mechanics and Physics
5 shared publications Alexandra Carvalho
Centre for Advanced 2D Materials and Graphene Research Centre, National University of Singapore, Singapore, Singapore
3 shared publicationsHai Xu
Department of Chemistry , National University of Singapore , 3 Science Drive 3 117543 , Singapore
3 shared publications
Latest Publications
- 7 December 2020
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (12) , 16761-16769
Direct Bandgap-like Strong Photoluminescence from Twisted Multilayer MoS2 Grown on SrTiO3
While direct bandgap monolayer 2D transition metal dichalcogenides (TMDs) have emerged as an important optoelectronic material due to strong light–matter interactions, their multilayer counterparts exhibit an indirect bandgap resulting in poor photon emission quantum yield. We report strong direct bandgap-like photoluminescence at ∼1.9 eV from multilayer MoS2 grown on SrTiO3, whose intensity is significantly higher than that observed in multilayer MoS2/SiO2. Using high-resolution electron microscopy we observe interlayer twist and >8% increase in the van der Waals gap, which leads to weaker interlayer coupling. This affects the evolution of the band structure in multilayer MoS2 as probed by transient absorption spectroscopy, causing higher photo carrier recombination at the direct gap. Our results provide a platform that could enable multilayer TMDs for robust optical device applications.
- 7 December 2020
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (12) , 16761-16769
Direct Bandgap-like Strong Photoluminescence from Twisted Multilayer MoS2 Grown on SrTiO3
While direct bandgap monolayer 2D transition metal dichalcogenides (TMDs) have emerged as an important optoelectronic material due to strong light–matter interactions, their multilayer counterparts exhibit an indirect bandgap resulting in poor photon emission quantum yield. We report strong direct bandgap-like photoluminescence at ∼1.9 eV from multilayer MoS2 grown on SrTiO3, whose intensity is significantly higher than that observed in multilayer MoS2/SiO2. Using high-resolution electron microscopy we observe interlayer twist and >8% increase in the van der Waals gap, which leads to weaker interlayer coupling. This affects the evolution of the band structure in multilayer MoS2 as probed by transient absorption spectroscopy, causing higher photo carrier recombination at the direct gap. Our results provide a platform that could enable multilayer TMDs for robust optical device applications.
- 7 November 2018
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 5 (12) , 4969-4977
Anisotropic Third-Order Nonlinearity in Pristine and Lithium Hydride Intercalated Black Phosphorus
- 7 November 2018
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 5 (12) , 4969-4977
Anisotropic Third-Order Nonlinearity in Pristine and Lithium Hydride Intercalated Black Phosphorus
- 7 September 2018
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 18 (10) , 6340-6346
Molecular-Beam Epitaxy of Two-Dimensional In2Se3 and Its Giant Electroresistance Switching in Ferroresistive Memory Junction
Ferroelectric thin film has attracted great interest for nonvolatile memory applications and can be used in either ferroelectric Schottky diodes or ferroelectric tunneling junctions due to its promise of fast switching speed, high on-to-off ratio, and nondestructive readout. Two-dimensional α-phase indium selenide (In2Se3), which has a modest band gap and robust ferroelectric properties stabilized by dipole locking, is an excellent candidate for multidirectional piezoelectric and switchable photodiode applications. However, the large-scale synthesis of this material is still elusive, and its performance as a ferroresistive memory junction is rarely reported. Here, we report the low-temperature molecular-beam epitaxy (MBE) of large-area monolayer α-In2Se3 on graphene and demonstrate the use of α-In2Se3 on graphene in ferroelectric Schottky diode junctions by employing high-work-function gold as the top electrode. The polarization-modulated Schottky barrier formed at the interface exhibits a giant electroresistance ratio of 3.9 × 106 with a readout current density of >12 A/cm2, which is more than 200% higher than the state-of-the-art technology. Our MBE growth method allows a high-quality ultrathin film of In2Se3 to be heteroepitaxially grown on graphene, thereby simplifying the fabrication of high-performance 2D ferroelectric junctions for ferroresistive memory applications.
- 7 September 2018
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 18 (10) , 6340-6346
Molecular-Beam Epitaxy of Two-Dimensional In2Se3 and Its Giant Electroresistance Switching in Ferroresistive Memory Junction
Ferroelectric thin film has attracted great interest for nonvolatile memory applications and can be used in either ferroelectric Schottky diodes or ferroelectric tunneling junctions due to its promise of fast switching speed, high on-to-off ratio, and nondestructive readout. Two-dimensional α-phase indium selenide (In2Se3), which has a modest band gap and robust ferroelectric properties stabilized by dipole locking, is an excellent candidate for multidirectional piezoelectric and switchable photodiode applications. However, the large-scale synthesis of this material is still elusive, and its performance as a ferroresistive memory junction is rarely reported. Here, we report the low-temperature molecular-beam epitaxy (MBE) of large-area monolayer α-In2Se3 on graphene and demonstrate the use of α-In2Se3 on graphene in ferroelectric Schottky diode junctions by employing high-work-function gold as the top electrode. The polarization-modulated Schottky barrier formed at the interface exhibits a giant electroresistance ratio of 3.9 × 106 with a readout current density of >12 A/cm2, which is more than 200% higher than the state-of-the-art technology. Our MBE growth method allows a high-quality ultrathin film of In2Se3 to be heteroepitaxially grown on graphene, thereby simplifying the fabrication of high-performance 2D ferroelectric junctions for ferroresistive memory applications.
- 12 July 2018
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 18 (8) , 5085-5090
Observation of Gap Opening in 1T′ Phase MoS2 Nanocrystals
Two dimensional (2D) transition metal dichalcogenides (TMDs) manifest in various pol-ymorphs which deliver different electronic properties; the most prominent among them include the semiconducting 2H phase and metallic 1T (or distorted 1T’ phase) phase. Alkali metal in-tercalation or interface strain has been used to induce semiconductor-to-metal transition in monolayer MoS2 sheet, leading to exotic quantum states or improved performance in catalysis. However, the direct growth of 1T or 1T’ phase MoS2 is challenging due to its metastability. Here, we report MBE growth of isolated 1T′ and 2H MoS2 nanocrystals on Au substrate; these nanocrystals can be differentiated unambiguously by their electronic states using scanning tunnelling microscopy(STM) and scanning tunnelling spectroscopy (STS). By studying the ini-tial stages of nucleation during molecular beam epitaxy (MBE) of MoS2, we could identify atomic clusters (30-50 atoms) with intralayer stacking corresponding to 1T′ and 2H separately, which suggests a deterministic growth mechanism from initial nuclei. Furthermore, a topolog-ical insulator type behavior was observed for the 1T′ MoS2 crystals, where an energy gap open-ing of 80 meV was measured by STS in the basal plane at 5K, with the edge of the nanocrystals remaining metallic.
- 12 July 2018
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 18 (8) , 5085-5090
Observation of Gap Opening in 1T′ Phase MoS2 Nanocrystals
Two dimensional (2D) transition metal dichalcogenides (TMDs) manifest in various pol-ymorphs which deliver different electronic properties; the most prominent among them include the semiconducting 2H phase and metallic 1T (or distorted 1T’ phase) phase. Alkali metal in-tercalation or interface strain has been used to induce semiconductor-to-metal transition in monolayer MoS2 sheet, leading to exotic quantum states or improved performance in catalysis. However, the direct growth of 1T or 1T’ phase MoS2 is challenging due to its metastability. Here, we report MBE growth of isolated 1T′ and 2H MoS2 nanocrystals on Au substrate; these nanocrystals can be differentiated unambiguously by their electronic states using scanning tunnelling microscopy(STM) and scanning tunnelling spectroscopy (STS). By studying the ini-tial stages of nucleation during molecular beam epitaxy (MBE) of MoS2, we could identify atomic clusters (30-50 atoms) with intralayer stacking corresponding to 1T′ and 2H separately, which suggests a deterministic growth mechanism from initial nuclei. Furthermore, a topolog-ical insulator type behavior was observed for the 1T′ MoS2 crystals, where an energy gap open-ing of 80 meV was measured by STS in the basal plane at 5K, with the edge of the nanocrystals remaining metallic.
- 9 July 2018
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 12 (8) , 7562-7570
Molecular Beam Epitaxy of Highly Crystalline MoSe2 on Hexagonal Boron Nitride
Molybdenum diselenide (MoSe2) is a promising two-dimensional material for next-generation electronics and optoelectronics. However, its application has been hindered by a lack of large-scale synthesis. Although chemical vapor deposition (CVD) using laboratory furnaces has been applied to grow two-dimensional (2D) MoSe2 cystals, no continuous film over macroscopically large area has been produced due to the lack of uniform control in these systems. Here, we investigate the molecular beam epitaxy (MBE) of 2D MoSe2 on hexagonal boron nitride (hBN) substrate, where highly crystalline MoSe2 film can be grown with electron mobility ∼15 cm2/(V s). Scanning transmission electron microscopy (STEM) shows that MoSe2 grains grown at an optimum temperature of 500 °C are highly oriented and coalesced to form continuous film with predominantly mirror twin boundaries. Our work suggests that van der Waals epitaxy of 2D materials is tolerant of lattice mismatch but is facilitated by substrates with similar symmetry.
- 9 July 2018
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 12 (8) , 7562-7570
Molecular Beam Epitaxy of Highly Crystalline MoSe2 on Hexagonal Boron Nitride
Molybdenum diselenide (MoSe2) is a promising two-dimensional material for next-generation electronics and optoelectronics. However, its application has been hindered by a lack of large-scale synthesis. Although chemical vapor deposition (CVD) using laboratory furnaces has been applied to grow two-dimensional (2D) MoSe2 cystals, no continuous film over macroscopically large area has been produced due to the lack of uniform control in these systems. Here, we investigate the molecular beam epitaxy (MBE) of 2D MoSe2 on hexagonal boron nitride (hBN) substrate, where highly crystalline MoSe2 film can be grown with electron mobility ∼15 cm2/(V s). Scanning transmission electron microscopy (STEM) shows that MoSe2 grains grown at an optimum temperature of 500 °C are highly oriented and coalesced to form continuous film with predominantly mirror twin boundaries. Our work suggests that van der Waals epitaxy of 2D materials is tolerant of lattice mismatch but is facilitated by substrates with similar symmetry.
- 25 June 2018
- Published by Springer Nature in Nature Nanotechnology
- Vol. 13 (9) , 828-834
Tailoring sample-wide pseudo-magnetic fields on a graphene–black phosphorus heterostructure
Spatially tailored pseudo-magnetic fields (PMFs) can give rise to pseudo-Landau levels and the valley Hall effect in graphene. At an experimental level, it is highly challenging to create the specific strain texture that can generate PMFs over large areas. Here, we report that superposing graphene on multilayer black phosphorus creates shear-strained superlattices that generate a PMF over an entire graphene–black phosphorus heterostructure with edge size of tens of micrometres. The PMF is intertwined with the spatial period of the moiré pattern, and its spatial distribution and intensity can be modified by changing the relative orientation of the two materials. We show that the emerging pseudo-Landau levels influence the transport properties of graphene–black phosphorus field-effect transistor devices with Hall bar geometry. The application of an external magnetic field allows us to enhance or reduce the effective field depending on the valley polarization with the prospect of developing a valley filter.
- 25 June 2018
- Published by Springer Nature in Nature Nanotechnology
- Vol. 13 (9) , 828-834
Tailoring sample-wide pseudo-magnetic fields on a graphene–black phosphorus heterostructure
Spatially tailored pseudo-magnetic fields (PMFs) can give rise to pseudo-Landau levels and the valley Hall effect in graphene. At an experimental level, it is highly challenging to create the specific strain texture that can generate PMFs over large areas. Here, we report that superposing graphene on multilayer black phosphorus creates shear-strained superlattices that generate a PMF over an entire graphene–black phosphorus heterostructure with edge size of tens of micrometres. The PMF is intertwined with the spatial period of the moiré pattern, and its spatial distribution and intensity can be modified by changing the relative orientation of the two materials. We show that the emerging pseudo-Landau levels influence the transport properties of graphene–black phosphorus field-effect transistor devices with Hall bar geometry. The application of an external magnetic field allows us to enhance or reduce the effective field depending on the valley polarization with the prospect of developing a valley filter.
- 30 April 2018
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 12 (5) , 5051-5058
Temperature- and Phase-Dependent Phonon Renormalization in 1T′-MoS2
Polymorph engineering of 2H-MoS2, which can be achieved by alkali metal intercalation to obtain either the mixed 2H/1Tʹ phases or a homogeneous 1Tʹ phase has received wide interest recently, since this serves as an effective route to tune the electrical and catalytic properties of MoS2. As opposed to an idealized single crystal-to-single crystal phase conversion, the 2H to 1T’ phase conversion results in crystal domain size reduction as well as strained lattices, although how these develop with composition are not well understood. Herein, the evolution of the phonon modes in Li-intercalated 1T’-MoS2 (LixMoS2) are investigated as a function of different 1T’-2H compositions. We observed that the strain evolution in the mixed phases is revealed by the softening of four Raman modes, Bg (J1), Ag (J3), E12g and A1g, with increasing 1T’ phase composition. Additionally, the first-order temperature coefficients of the 1T’ phonon mode vary linearly with increasing 1T’ composition, which is explained by increased electron-phonon and strain-phonon coupling.
- 30 April 2018
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 12 (5) , 5051-5058
Temperature- and Phase-Dependent Phonon Renormalization in 1T′-MoS2
Polymorph engineering of 2H-MoS2, which can be achieved by alkali metal intercalation to obtain either the mixed 2H/1Tʹ phases or a homogeneous 1Tʹ phase has received wide interest recently, since this serves as an effective route to tune the electrical and catalytic properties of MoS2. As opposed to an idealized single crystal-to-single crystal phase conversion, the 2H to 1T’ phase conversion results in crystal domain size reduction as well as strained lattices, although how these develop with composition are not well understood. Herein, the evolution of the phonon modes in Li-intercalated 1T’-MoS2 (LixMoS2) are investigated as a function of different 1T’-2H compositions. We observed that the strain evolution in the mixed phases is revealed by the softening of four Raman modes, Bg (J1), Ag (J3), E12g and A1g, with increasing 1T’ phase composition. Additionally, the first-order temperature coefficients of the 1T’ phonon mode vary linearly with increasing 1T’ composition, which is explained by increased electron-phonon and strain-phonon coupling.
- 3 January 2018
- Published by Wiley in Advanced Materials
- Vol. 30 (6)
Quasi‐Monolayer Black Phosphorus with High Mobility and Air Stability
Black phosphorus (BP) exhibits thickness‐dependent band gap and high electronic mobility. The chemical intercalation of BP with alkali metal has attracted attention recently due to the generation of universal superconductivity regardless of the type of alkali metals. However, both ultrathin BP, as well as alkali metal‐intercalated BP, are highly unstable and corrode rapidly under ambient conditions. This study demonstrates that alkali metal hydride intercalation decouples monolayer to few layers BP from the bulk BP, allowing an optical gap of ≈1.7 eV and an electronic gap of 1.98 eV to be measured by photoluminescence and electron energy loss spectroscopy at the intercalated regions. Raman and transport measurements confirm that chemically intercalated BP exhibits enhanced stability, while maintaining a high hole mobility of up to ≈800 cm2 V−1 s−1 and on/off ratio exceeding 103. The use of alkali metal hydrides as intercalants should be applicable to a wide range of layered 2D materials and pave the way for generating highly stable, quasi‐monolayer 2D materials.
- 3 January 2018
- Published by Wiley in Advanced Materials
- Vol. 30 (6)
Quasi‐Monolayer Black Phosphorus with High Mobility and Air Stability
Black phosphorus (BP) exhibits thickness‐dependent band gap and high electronic mobility. The chemical intercalation of BP with alkali metal has attracted attention recently due to the generation of universal superconductivity regardless of the type of alkali metals. However, both ultrathin BP, as well as alkali metal‐intercalated BP, are highly unstable and corrode rapidly under ambient conditions. This study demonstrates that alkali metal hydride intercalation decouples monolayer to few layers BP from the bulk BP, allowing an optical gap of ≈1.7 eV and an electronic gap of 1.98 eV to be measured by photoluminescence and electron energy loss spectroscopy at the intercalated regions. Raman and transport measurements confirm that chemically intercalated BP exhibits enhanced stability, while maintaining a high hole mobility of up to ≈800 cm2 V−1 s−1 and on/off ratio exceeding 103. The use of alkali metal hydrides as intercalants should be applicable to a wide range of layered 2D materials and pave the way for generating highly stable, quasi‐monolayer 2D materials.
- 22 December 2017
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 18 (1) , 482-490
Mo-Terminated Edge Reconstructions in Nanoporous Molybdenum Disulfide Film
The catalytic and magnetic properties of molybdenum disulfide (MoS2) are significantly enhanced by the presence of edge sites. One way to obtain a high density of edge sites in a two-dimensional (2D) film is by introducing porosity. However, the large-scale bottom-up synthesis of a porous 2D MoS2 film remains challenging and the correlation of growth conditions to the atomic structures of the edges remains to be studied. Here, using molecular beam epitaxy (MBE), we prepared wafer-scale nanoporous MoS2 films under conditions of high Mo flux and studied their catalytic and magnetic properties. Atomic-resolution electron microscopy imaging of the pores reveals two new types of reconstructed Mo-terminated edges, namely, distorted 1T (DT) edge and the Mo-Klein edge. Nanoporous MoS2 films are magnetic up to 400 K, which is attributed to the presence of Mo-terminated edges with unpaired electrons, as confirmed by DFT calculation. The small hydrogen adsorption free energy at these Mo-terminated edges leads to excellent activity for hydrogen evolution reaction.
- 22 December 2017
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 18 (1) , 482-490
Mo-Terminated Edge Reconstructions in Nanoporous Molybdenum Disulfide Film
The catalytic and magnetic properties of molybdenum disulfide (MoS2) are significantly enhanced by the presence of edge sites. One way to obtain a high density of edge sites in a two-dimensional (2D) film is by introducing porosity. However, the large-scale bottom-up synthesis of a porous 2D MoS2 film remains challenging and the correlation of growth conditions to the atomic structures of the edges remains to be studied. Here, using molecular beam epitaxy (MBE), we prepared wafer-scale nanoporous MoS2 films under conditions of high Mo flux and studied their catalytic and magnetic properties. Atomic-resolution electron microscopy imaging of the pores reveals two new types of reconstructed Mo-terminated edges, namely, distorted 1T (DT) edge and the Mo-Klein edge. Nanoporous MoS2 films are magnetic up to 400 K, which is attributed to the presence of Mo-terminated edges with unpaired electrons, as confirmed by DFT calculation. The small hydrogen adsorption free energy at these Mo-terminated edges leads to excellent activity for hydrogen evolution reaction.
- 21 December 2017
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 12 (1) , 852-860
Two-Dimensional Polymer Synthesized via Solid-State Polymerization for High-Performance Supercapacitors
Two-dimensional (2-D) polymer has properties that are attractive for energy storage applications because of its combination of heteroatoms, porosities and layered structure, which provides redox chemistry and ion diffusion routes through the 2-D planes and 1-D channels. Here, conjugated aromatic polymers (CAPs) were synthesized in quantitative yield via solid-state polymerization of phenazine-based precursor crystals. By choosing flat molecules (2-TBTBP and 3-TBQP) with different positions of bromine substituents on a phenazine-derived scaffold, C-C cross coupling was induced following thermal debromination. CAP-2 is polymerized from monomers which have been pre-packed into layered structure (3-TBQP). It can be mechanically exfoliated into micrometer-sized ultrathin sheets which show sharp Raman peaks with characterisic of conformational ordering. CAP-2 has a dominant pore size of ~ 0.8 nm, when applied as an asymmetric supercapacitor, it delivers a specific capacitance of 233 F g-1 at a current density of 1.0 A g-1, and shows outstanding cycle performance.
- 21 December 2017
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 12 (1) , 852-860
Two-Dimensional Polymer Synthesized via Solid-State Polymerization for High-Performance Supercapacitors
Two-dimensional (2-D) polymer has properties that are attractive for energy storage applications because of its combination of heteroatoms, porosities and layered structure, which provides redox chemistry and ion diffusion routes through the 2-D planes and 1-D channels. Here, conjugated aromatic polymers (CAPs) were synthesized in quantitative yield via solid-state polymerization of phenazine-based precursor crystals. By choosing flat molecules (2-TBTBP and 3-TBQP) with different positions of bromine substituents on a phenazine-derived scaffold, C-C cross coupling was induced following thermal debromination. CAP-2 is polymerized from monomers which have been pre-packed into layered structure (3-TBQP). It can be mechanically exfoliated into micrometer-sized ultrathin sheets which show sharp Raman peaks with characterisic of conformational ordering. CAP-2 has a dominant pore size of ~ 0.8 nm, when applied as an asymmetric supercapacitor, it delivers a specific capacitance of 233 F g-1 at a current density of 1.0 A g-1, and shows outstanding cycle performance.