Armando Beltran
Research Subjects
Armando Beltran has a total of 174 co-authors. Here are the top co-authors by number of shared publications:
- Juan Andrés
Universitat Jaume I
66 shared publications - Elson Longo
Federal University of Sao Carlos (UFSCar)
34 shared publications - Lourdes Gracia
Departament de Química Física i Analítica, Universitat Jaume I, 12071 Castelló de la Plana, Spain
33 shared publications - Monica Calatayud
Sorbonne Université, MONARIS, CNRS-UMR 8233, 4 Place Jussieu, F-75005 Paris, France
11 shared publications - Julio Ricardo Sambrano
São Paulo State University (UNESP)
10 shared publications - Paulo Sergio Pizani
Universidade Federal de São Carlos
9 shared publications
Latest Publications
- 23 January 2015
- Published by Wiley in Particle & Particle Systems Characterization
- Vol. 32 (6) , 646-651
A Combined Experimental and Theoretical Study on the Formation of Ag Filaments on β‐Ag2MoO4Induced by Electron Irradiation
A combined experimental and theoretical study is presented to understand the novel observed nucleation and early evolution of Ag filaments on β‐Ag2MoO4crystals, driven by an accelerated electron beam from an electronic microscope under high vacuum. The growth process, chemical composition, and the element distribution in these filaments are analyzed in depth at the nanoscale level using field‐emission scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) with energy‐dispersive spectroscopy (EDS) characterization. To complement experimental results, chemical stability, structural and electronic aspects have been studied systematically using first‐principles electronic structure theory within a quantum theory of atoms in molecules (QTAIM) framework. The Ag nucleation and formation on β‐Ag2MoO4are a result of structural and electronic changes of the AgO4tetrahedral cluster as a constituent building block of β‐Ag2MoO4, consistent with Ag metallic formation. The formation of Ag filament transforms the β‐Ag2MoO4semiconductor fromn‐top‐type concomitant with the appearance of Ag defects.
- 23 January 2015
- Published by Wiley in Particle & Particle Systems Characterization
- Vol. 32 (6) , 646-651
A Combined Experimental and Theoretical Study on the Formation of Ag Filaments on β‐Ag2MoO4Induced by Electron Irradiation
A combined experimental and theoretical study is presented to understand the novel observed nucleation and early evolution of Ag filaments on β‐Ag2MoO4crystals, driven by an accelerated electron beam from an electronic microscope under high vacuum. The growth process, chemical composition, and the element distribution in these filaments are analyzed in depth at the nanoscale level using field‐emission scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) with energy‐dispersive spectroscopy (EDS) characterization. To complement experimental results, chemical stability, structural and electronic aspects have been studied systematically using first‐principles electronic structure theory within a quantum theory of atoms in molecules (QTAIM) framework. The Ag nucleation and formation on β‐Ag2MoO4are a result of structural and electronic changes of the AgO4tetrahedral cluster as a constituent building block of β‐Ag2MoO4, consistent with Ag metallic formation. The formation of Ag filament transforms the β‐Ag2MoO4semiconductor fromn‐top‐type concomitant with the appearance of Ag defects.
- 9 September 2014
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 118 (40) , 23189-23201
Isostructural Second-Order Phase Transition of β-Bi2O3 at High Pressures: An Experimental and Theoretical Study
- 9 September 2014
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 118 (40) , 23189-23201
Isostructural Second-Order Phase Transition of β-Bi2O3 at High Pressures: An Experimental and Theoretical Study
- 9 May 2014
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 26 (22) , 225401
Pressure effects on the vibrational properties ofα-Bi2O3: an experimental and theoretical study
We report an experimental and theoretical high-pressure study of the vibrational properties of synthetic monoclinic bismuth oxide (α-Bi(2)O(3): ), also known as mineral bismite. The comparison of Raman scattering measurements and theoretical lattice-dynamics ab initio calculations is key to understanding the complex vibrational properties of bismite. On one hand, calculations help in the symmetry assignment of phonons and to discover the phonon interactions taking place in this low-symmetry compound, which shows considerable phonon anticrossings; and, on the other hand, measurements help to validate the accuracy of first-principles calculations relating to this compound. We have also studied the pressure-induced amorphization (PIA) of synthetic bismite occurring around 20 GPa and showed that it is reversible below 25 GPa. Furthermore, a partial temperature-induced recrystallization (TIR) of the amorphous sample can be observed above 20 GPa upon heating to 200°C, thus evidencing that PIA at room temperature occurs because of the inability of the α phase to undergo a phase transition to a high-pressure phase. Raman scattering measurements of the TIR sample at room temperature during pressure release have been performed. The interpretation of these results in the light of ab initio calculations of the candidate phases at high pressures has allowed us to tentatively attribute the TIR phase to the recently found high-pressure hexagonal HPC phase and to discuss its lattice dynamics.
- 9 May 2014
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 26 (22) , 225401
Pressure effects on the vibrational properties ofα-Bi2O3: an experimental and theoretical study
We report an experimental and theoretical high-pressure study of the vibrational properties of synthetic monoclinic bismuth oxide (α-Bi(2)O(3): ), also known as mineral bismite. The comparison of Raman scattering measurements and theoretical lattice-dynamics ab initio calculations is key to understanding the complex vibrational properties of bismite. On one hand, calculations help in the symmetry assignment of phonons and to discover the phonon interactions taking place in this low-symmetry compound, which shows considerable phonon anticrossings; and, on the other hand, measurements help to validate the accuracy of first-principles calculations relating to this compound. We have also studied the pressure-induced amorphization (PIA) of synthetic bismite occurring around 20 GPa and showed that it is reversible below 25 GPa. Furthermore, a partial temperature-induced recrystallization (TIR) of the amorphous sample can be observed above 20 GPa upon heating to 200°C, thus evidencing that PIA at room temperature occurs because of the inability of the α phase to undergo a phase transition to a high-pressure phase. Raman scattering measurements of the TIR sample at room temperature during pressure release have been performed. The interpretation of these results in the light of ab initio calculations of the candidate phases at high pressures has allowed us to tentatively attribute the TIR phase to the recently found high-pressure hexagonal HPC phase and to discuss its lattice dynamics.
- 20 February 2014
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 118 (9) , 4930-4940
Insight into the Effects of Fe Addition on the Local Structure and Electronic Properties of SrTiO3
- 20 February 2014
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 118 (9) , 4930-4940
Insight into the Effects of Fe Addition on the Local Structure and Electronic Properties of SrTiO3
- 10 February 2014
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 118 (7) , 3724-3732
First-Principles Study of Pressure-Induced Phase Transitions and Electronic Properties of Ag2MoO4
- 10 February 2014
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 118 (7) , 3724-3732
First-Principles Study of Pressure-Induced Phase Transitions and Electronic Properties of Ag2MoO4
- 11 November 2013
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 16 (3) , 1089-1094
Prediction of dopant atom distribution on nanocrystals using thermodynamic arguments
A theoretical approach aiming at the prediction of segregation of dopant atoms on nanocrystalline systems is discussed here. It considers the free energy minimization argument in order to provide the most likely dopant distribution as a function of the total doping level. For this, it requires as input (i) a fixed polyhedral geometry with defined facets, and (ii) a set of functions that describe the surface energy as a function of dopant content for different crystallographic planes. Two Sb-doped SnO2 nanocrystalline systems with different morphology and dopant content were selected as a case study, and the calculation of the dopant distributions expected for them is presented in detail. The obtained results were compared to previously reported characterization of this system by a combination of HRTEM and surface energy calculations, and both methods are shown to be equivalent. Considering its application pre-requisites, the present theoretical approach can provide a first estimation of doping atom distribution for a wide range of nanocrystalline systems. We expect that its use will support the reduction of experimental effort for the characterization of doped nanocrystals, and also provide a solution to the characterization of systems where even state-of-art analytical techniques are limited.
- 11 November 2013
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 16 (3) , 1089-1094
Prediction of dopant atom distribution on nanocrystals using thermodynamic arguments
A theoretical approach aiming at the prediction of segregation of dopant atoms on nanocrystalline systems is discussed here. It considers the free energy minimization argument in order to provide the most likely dopant distribution as a function of the total doping level. For this, it requires as input (i) a fixed polyhedral geometry with defined facets, and (ii) a set of functions that describe the surface energy as a function of dopant content for different crystallographic planes. Two Sb-doped SnO2 nanocrystalline systems with different morphology and dopant content were selected as a case study, and the calculation of the dopant distributions expected for them is presented in detail. The obtained results were compared to previously reported characterization of this system by a combination of HRTEM and surface energy calculations, and both methods are shown to be equivalent. Considering its application pre-requisites, the present theoretical approach can provide a first estimation of doping atom distribution for a wide range of nanocrystalline systems. We expect that its use will support the reduction of experimental effort for the characterization of doped nanocrystals, and also provide a solution to the characterization of systems where even state-of-art analytical techniques are limited.
- 31 October 2013
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 25 (47) , 475402
Structural study of α-Bi2O3under pressure
An experimental and theoretical study of the structural properties of monoclinic bismuth oxide (α-Bi2O3) under high pressures is here reported. Both synthetic and mineral bismite powder samples have been compressed up to 45 GPa and their equations of state have been determined with angle-dispersive x-ray diffraction measurements. Experimental results have been also compared with theoretical calculations which suggest the possibility of several phase transitions below 10 GPa. However, experiments reveal only a pressure-induced amorphization between 15 and 25 GPa, depending on sample quality and deviatoric stresses. The amorphous phase has been followed up to 45 GPa and its nature discussed.
- 31 October 2013
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 25 (47) , 475402
Structural study of α-Bi2O3under pressure
An experimental and theoretical study of the structural properties of monoclinic bismuth oxide (α-Bi2O3) under high pressures is here reported. Both synthetic and mineral bismite powder samples have been compressed up to 45 GPa and their equations of state have been determined with angle-dispersive x-ray diffraction measurements. Experimental results have been also compared with theoretical calculations which suggest the possibility of several phase transitions below 10 GPa. However, experiments reveal only a pressure-induced amorphization between 15 and 25 GPa, depending on sample quality and deviatoric stresses. The amorphous phase has been followed up to 45 GPa and its nature discussed.
- Open Access
- 26 July 2013
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 114 (4) , 043714
Quantum mechanical modeling of excited electronic states and their relationship to cathodoluminescence of BaZrO3
First-principles calculations set the comprehension over performance of novel cathodoluminescence (CL) properties of BaZrO3 prepared through microwave-assisted hydrothermal. Ground (singlet, s*) and excited (singlet s** and triplet t**) electronic states were built from zirconium displacement of 0.2 Å in {001} direction. Each ground and excited states were characterized by the correlation of their corresponding geometry with electronic structures and Raman vibrational frequencies which were also identified experimentally. A kind of optical polarization switching was identified by the redistribution of 4dz2 and 4dxz (Zr) orbitals and 2pz O orbital. As a consequence, asymmetric bending and stretching modes theoretically obtained reveal a direct dependence with their polyhedral intracluster and/or extracluster ZrO6 distortions with electronic structure. Then, CL of the as-synthesized BaZrO3 can be interpreted as a result of stable triplet excited states, which are able to trap electrons, delaying the emission process due to spin multiplicity changes.
- 26 July 2013
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 114 (4) , 043714
Open AccessQuantum mechanical modeling of excited electronic states and their relationship to cathodoluminescence of BaZrO3
First-principles calculations set the comprehension over performance of novel cathodoluminescence (CL) properties of BaZrO3 prepared through microwave-assisted hydrothermal. Ground (singlet, s*) and excited (singlet s** and triplet t**) electronic states were built from zirconium displacement of 0.2 Å in {001} direction. Each ground and excited states were characterized by the correlation of their corresponding geometry with electronic structures and Raman vibrational frequencies which were also identified experimentally. A kind of optical polarization switching was identified by the redistribution of 4dz2 and 4dxz (Zr) orbitals and 2pz O orbital. As a consequence, asymmetric bending and stretching modes theoretically obtained reveal a direct dependence with their polyhedral intracluster and/or extracluster ZrO6 distortions with electronic structure. Then, CL of the as-synthesized BaZrO3 can be interpreted as a result of stable triplet excited states, which are able to trap electrons, delaying the emission process due to spin multiplicity changes.
- 1 April 2013
- Published by Elsevier in Polyhedron
- Vol. 54, 13-25
A combined theoretical and experimental study of electronic structure and optical properties of β-ZnMoO4 microcrystals
- 1 April 2013
- Published by Elsevier in Polyhedron
- Vol. 54, 13-25
A combined theoretical and experimental study of electronic structure and optical properties of β-ZnMoO4 microcrystals
- 1 November 2012
- Published by Elsevier in Materials Characterization
- Vol. 73, 124-129
Electronic structure and magnetic properties of FeWO4 nanocrystals synthesized by the microwave-hydrothermal method
- 1 November 2012
- Published by Elsevier in Materials Characterization
- Vol. 73, 124-129
Electronic structure and magnetic properties of FeWO4 nanocrystals synthesized by the microwave-hydrothermal method